Used Spinner Tc 300 52 Smcy for sale (17,276)

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Rjdpfx Asxbhtregujcb Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Rcedpfx Aevz E Sisgusb Total power requirement 2,2 kw

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 0084603, workpiece width (max.): 300 mm, Equipment: double-sided, VG FANTASTIC 300 SANDER CALIBRATION VG MACHINES MODEL DOUBLE-SIDED FANTASTIC F/G 300 - 3KKS/3KKS - Working width: 300 mm - Total installed power: 37 kW - Configuration: RRT/RRT (lower roller + upper roller) - Motors: 2x (7.5 + 7.5 + 7.5) Belt width: 1900 x 300 mm Redpfx Agoxiycusuecb

Condition: excellent (used), Year of construction: 2001, Mazak 3-axis vertical machining center in very good condition. About 8500 spindle hours and was only used for light work (machining Aluminium). Machine can be inspected under power upon appointment. Immediately available for delivery. Including: High pressure pump - 15 bar cooling through spindle Chip conveyor FH 3D probe Control Mazatrol Fusion 640M Rsdpfeywhbkox Aguocb Max spindle speed 10000 rpm X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Tool holder SK40 Capacity tool magazine 60 positions Table length 2000 mm Table width 760 mm Table load 1400 kg Machine weight 10500 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, mesh size: 50,100 mm, 300 x wire mesh decking for pallet racking (Euro pallets) approx. 88 cm x 110 cm, galvanized Load capacity 1,000 kg (with evenly distributed load) For beams 182.5 cm + 270 cm long with 4 cm beam thickness Shipping / Delivery: - max. 7 business days after receipt of payment - delivered free to site / installation location - Unloading from truck to be carried out by the buyer using their own lifting equipment - Deliveries within the entire territory of Germany, excluding islands! Deliveries to EU countries by individual arrangement. Rcjdpjyzb Acefx Aguob

Condition: new, PRICE: 2300 EUR Table dough laminator Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Rjdpsuuh Iisfx Agujcb Voltage: 380V 50Hz Weight: 130 kg

Condition: new, PRICE: 2300 EUR Rcsdouuhn Ajpfx Agusb Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Weight: 150 kg

Condition: new, mileage: 201 km, power: 382 kW (519.37 HP), first registration: 02/2026, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, parking heater, retarder, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Roof spoiler - High beam - Intarder - Alloy wheels - Air suspension - Particulate filter - Sleeper cab - Side skirts - Sun visor - Auxiliary heater = Notes = MAN TGX 18.520 – show truck Model year: 2026 – NEW Mileage: 50 km Retarder LED package plus Stationary air conditioning ACC stop & go BUFFL exterior – Show truck = Further Information = Front axle: Tire size: 385/55R22.5; Alloy wheels; Max. axle load: 8,000 kg; Steering; Tire tread left: 100%; Tire tread right: 100% Rear axle: Tire size: 315/70R22.5; Dual tires; Alloy wheels; Max. axle load: 13,000 kg; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100%; Suspension: Air suspension Number of cylinders: 6 Gross vehicle weight: 21,000 kg Body manufacturer: ZF Overall condition: very good Technical condition: very good Optical condition: very good Rcjdpfx Agey Akaaoueb

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 4,500 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810 D, This SPINNER MT 350/750 was manufactured in 2002. A robust horizontal turning machine featuring a travel distance of X 155 mm and Z 800 mm, a circulation diameter over bed of 350 mm, and a turning length of 750 mm. Powered by a 9/11 kW drive and controlled by SINUMERIK 810 D, consider the opportunity to buy this SPINNER MT 350/750 horizontal turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits Rcedpsx R E N Eefx Agusb • Circulation diameter over bed: 350 mm / circumferential diameter over slide: 180 mm / turning length maximum: 750 mm • Drive power: 9/11 kw • Spindle RPM: 4500U/min • with Steady Rest

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details. • Programming: Siemens ShopMill-OPERATE (conversational) • Spindle: in-line direct drive (Combi-Drive); pull studs DIN 69872-A • Coolant: Internal coolant supply (IKZ; noted as high-pressure) • Rapid traverse: 36 m/min • Guideways: Linear guides on X/Y/Z • Tool changer: High-speed double-arm, 24 stations; spindle taper blow-out device • Enclosure: Full splash guard housing • Standard equipment: Coolant system, workspace lighting Rcedoyifm Depfx Aguob • Installation: Leveling elements included • Finish: Two-tone paint RAL 7035 (light grey) / RAL 5008 (grey-blue) • Condition: Approx. 100 spindle hours (prototype use; like-new) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, total height: 2,500 mm, total width: 1,800 mm, table load: 250 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, product length (max.): 2,400 mm, This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details. Rjdpfx Aeykt T Dsguocb • Condition: Operational; reportedly very low usage • Control: To be confirmed • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s • Coolant system: 250 L • Spindle hours: Unknown (reported very low) Additional equipment • New 4th axis (included, never installed, unused, still in box) • Complete tooling set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 640, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information. Additional equipment • Accessories: Chip conveyor Machine Benefits Technical Machine Benefits • Table size: 1800 x 810 mm • Allowed weight: 2000 kg • Automatic tool changer: atc 24 positions Extra Information Machine still under power Rcodpeyallqjfx Aguob Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2013, operating hours: 16,981 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, overall weight: 8,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis SPINNER MVC 1600 was manufactured in 2013. It features an impressive X-axis travel of 1600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1800 x 810 mm and a maximum workpiece weight of 2000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC 1600 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Table size: 1800 × 810 mm • Maximum workpiece weight: 2000 kg • Spindle torque: 109–1052 Nm • Tool magazine capacity: 24 tools • Tool changer condition: defective • Supply voltage: 400 V • Power supply: 3 / PE • Frequency: 50 / 60 Hz • Rated current (IB): 58 A • Nominal current (IN): 63 A • Hours: 16,981 h Additional equipment • Optional 4th axis for 10.000€ Technical Specification Rcsdpeypcfmefx Agusb Taper Size SK 40

Condition: used, Year of construction: 2020, Technical details: Rodpjyqyfgofx Aguscb x-travel: 1530 mm y-travel: 530 mm z-travel: 465 mm side by side, right side fixed table X =: 925 mm side by side left side 2 axis table X =: 780 mm control: Heidenhain TNC 640 tool magazin:: 122 SK 40 spindle turning speed - stepless: 12.000 1/min Spindle Torque: 120 Nm power capacity: 22 kW Fixed Table Dimensions: 920 x 540 mm Table load fixed table: 2000 kg Max. parts size on fixed table: 900 x 500 x 400 mm Diameter of integrated 2-axis rotary table: 650 mm Table load rotary table: 500 kg B-axis swivel angle: -90°/+110° ° / deg Max. parts size on rotary table: 600 x 500 x 400 mm Max. Parts size over both tables: 1500 x 500 x 400 mm internal coolant system feed: 70 bar bar weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,65 x 2,53 x 2,81 m Accerories pendant hand wheel HR 510 FS Rotoclear window Automatic machine switch off after prog. cycle end Measuring probe for work piece Blum TC 52 Coolant gun The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent condition. 122 tool holdersr SK 40 come with the machine. A special vice from Gressel for 5-axis machining for the rotary table also comes with the machine. *

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 704 mm, controller model: FANUC SERIES 31 i-MODEL A, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. Rcjdeym Ai Hjpfx Agujb TECHNICAL DETAILS TRAVEL DISTANCES X1-axis: 180 mm X2-axis: 180 mm Y1-axis: ±45 mm Z1-axis: 704 mm Z2-axis: 620 mm E2-axis: 720 mm Rapid traverse X/Y/Z-axis: 30 m/min SPINDLE 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2 Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Output power: 16.5 kW Max. speed for driven tools: 8,000 rpm Number of tool turret stations 1: 12 Number of tool turret stations 2: 10 All tool positions are driven MACHINE DETAILS Control: FANUC SERIES 31 i-MODEL A Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Machine weight: 9,000 kg Read operating hours: 5,381 h EQUIPMENT Chip conveyor by KNOLL Tool holders (as shown in the photos are included) External reference: Dürr

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Rsdoxbfutopfx Aguscb

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Tracked excavator CAT 352-07 The machine has only 5,300 operating hours and is in good condition Operating weight approx. 52,800 kg Rcedpjyy Hvxsfx Agueb

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 1,200 mm, table length: 500 mm, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, We offer this used Spinner MVC1000 vertical machining center, year of manufacture 2000. Rcsdpfx Asyypbwsgusb Manufacturer: Spinner Model: MVC1000 Year of manufacture: 2000 Condition: used Category ID: 1283 Type ID: 4156 Machine type: vertical machining center If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,013 h, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, table length: 1,100 mm, table width: 560 mm, controller model: 840d SL ShopMill Operate, rotational speed (max.): 12,000 rpm, operating hours of spindle: 203 h, For sale is a machining center of the brand Spinner and the type P3-620 The machine has an internal 2 compartment pallet changer, which makes it possible to set up during the work process. Particularly noteworthy are the 203 spindle hours and the very good condition of the machine Technical data: Year of construction: 2011 Control: Siemens 840d-SL ShopMill Operate Spindle speed: 12,000 1/min Spindle holder: SK 40 Table dimensions: 1,100*560 mm Travel X 620 mm Travel Y: 520 mm Z travel: 460 mm Tool changer: 32 pockets (chain) Tool changer head: double arm Pallet changer: 2-fold (180 °) Machine lighting, Chip conveyor in the milling area, Chip conveyor scraper belt with coolant device Belt filter system with IKZ 40 bar Hydraulic oil cooling system, Rotary feed-through in the table On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Redpst Sftwsfx Aguscb Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Year of construction: 2025, 🚢 20ft Storage Container – Like New (Year of Manufacture 2025 / 2026) – Available Immediately! High-quality shipping container in nearly new condition – perfect for use as storage space, workshop, site container, or for professional transport applications. ⭐ Your Advantages at a Glance 🆕 Year of manufacture 2025 / 2026 – like new 💪 Very robust steel construction (2 mm wall thickness) Rodporvg Rtefx Aguscb 🌧️ Wind- and waterproof 🔐 Securely lockable with 4-bar door locking system 🚚 Equipped with CSC plate – suitable for global shipping 🌬️ Ventilation system to prevent moisture build-up 🪵 Premium wooden floor 🛠️ Forklift pockets integrated in the base 📏 Dimensions & Technical Specifications 📐 External dimensions: 6,058 × 2,438 × 2,591 mm 📦 Internal dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door opening: 2,343 mm 🧱 Volume: approx. 33 m³ ⚖️ Empty weight: approx. 2.25 t 🏋️ Load capacity: up to 30 t These containers impress with their durability, security, and versatility – an ideal solution for commercial, construction, trade, or demanding private use. 📬 Contact us now – we will provide you with a customized offer! 👀 Additional container sizes and variants available. 🚛 Nationwide delivery within Germany possible (for an additional charge).

Condition: new, Year of construction: 2026, SCV11300TC VIBER BIG-BAG is a modern industrial dust extractor designed for intensive operation in woodworking shops and manufacturing facilities. The unit stands out thanks to its two high-capacity BIG-BAG containers, significantly improving waste management efficiency. Equipped with advanced filtration and protection systems, it ensures effective extraction of sawdust, dust, and wood chips even during long-term continuous operation. Key Advantages Two BIG-BAGs – a unique market solution increasing waste collection capacity VIBER system – automatic filter shaking ensures consistent extraction performance TC housing – fully enclosed, sound-insulated design reducing noise and vibration DAMAGE PROTECT – mechanical protection safeguarding the impeller against damage from larger objects REHEAT – heat recovery from exhaust air, improving the facility’s energy efficiency Construction and Technology The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced impeller, ensuring stable, trouble-free operation and high suction performance of up to 11,300 m³/h. The housing is designed for effective acoustic insulation and maximum suction system tightness, resulting in cleaner and warmer air in the workplace. Rsdpfsudav Nsx Agujcb Precision and Performance With 64 polyester filters rated at 5 microns and the option to install an additional HEPA filter, the unit guarantees safe and highly efficient air purification. The high suction velocity (28–32 m/s) enables efficient removal of chips and sawdust from multiple workstations simultaneously. Applications The SCV11300TC VIBER BIG-BAG model is an ideal solution for: woodworking shops furniture factories operators of panel saws, edge banders, and sanders other facilities requiring a central dust extraction system Standard Equipment VIBER automatic filter cleaning system Two BIG-BAG containers Control cabinet with operator panel TC housing with acoustic insulation DAMAGE PROTECT safety system Optional Equipment HEPA filter for ultra-fine particles BIG-BAG fill level sensors Automatic fan reverse system Technical Specifications Power supply voltage: 400 V Power: 11 kW Motor speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Number of filters: 64 pcs Filtration area: 30 m² Inlet diameter: 350 mm Outlet diameter: 500 mm Capacity: 11,300 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3250 × 1100 × 3700 mm Weight: 820 kg

Condition: used, functionality: fully functional, overall weight: 675 kg, empty load weight: 675 kg, total length: 825 mm, total width: 520 mm, total height: 620 mm, color: silver, fuel: electricity, fuel type: electric, Year of construction: 2019, battery capacity: 416 Ah, output voltage: 48 V, Forklift battery 48V TC5207-16 Battery 416Ah / 21.55kWh 100% Replacement: for 48V 4PzS500 Year of manufacture: 2019 Dimensions (LxWxH): 825mm x 520mm x 620mm Weight approx. 675kg Capacity test (C5 discharge test) 100% REMA 320A connector With display Next service due: 01.12.2026 No usage limitation Guaranteed 4000 charging cycles Standalone system – no CAN BUS necessary Integrated fire suppression system Charger optional: 300A with 400V/63A or 100A 400V/16A Redpfx Aoxyw Najguocb

Condition: excellent (used), Year of construction: 2011, operating hours: 8,968 h, functionality: fully functional, CNC controller Fanuc Oi-MD electronic handwheel 24-position tool changer cooling unit chip conveyor Technical data: Redpfx Agsytfd Houecb X travel: 450 mm Y travel: 400 mm Z travel: 400 mm Spindle taper: SK40 Spindle speed: 15000 min⁻¹ Rapid traverse: 36 m/min Number of tool positions: 24 Spindle drive power: 16 kW Weight approx.: 3800 kg

Year of construction: 2001, condition: excellent (used), Control SIEMENS Swing over bed 350 mm Turning diameter 180 mm Redslawakopfx Aguecb Distance between centers 500 mm Spindle speed 4000 rpm tailstock multifix Accesories

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck diameter 300mm, 450.-€ Rcsdebvk I Eopfx Agusb