Used Spray Cleaning System for sale (43,330)

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. Prodowc Nrnspfx Alwsb To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: good (used), Year of construction: 1994, Working area approximately 2,080 x 1,430 mm, lateral impact plates on the right and left, filter area approximately 1,800 x 1,300 mm, 2 rows of paper volume filters approximately 650 x 1,800 mm, internal fine filter G4 approximately 1,350 x 2,000 mm, air flow rate 4,500 m³/h, pressure max. 500 Pa, Podpspvil Tjfx Alwerb motor 1.1 kW / 1,400 rpm. Ex works, as inspected, from the Seevetal location, subject to prior sale.

Condition: excellent (used), EXTRACTION SYSTEM HUNKELER HKU 2000 (Compact Extraction Unit) Psdjz A Dqyspfx Alwsrb

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes Pedpfx Asy Ai Eholwsrb • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance Pedpfx Aljx S Etmewerb - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: like new (used), A stainless steel screw conveyor (in mint condition) for an extraction system upstream of the rotary valve. Prjdpfx Aszzzuiolweb Technical data: - Length: ~ 530 mm - Diameter: ~ 145 mm

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Prsdpsxzug Sefx Alwsb Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Predjzzw Iropfx Alwsb Copper 3 mm Brass 3 mm With loading and unloading system for the sheets

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Psdpfxjzz Achj Alwsrb Type: HPS 4022 Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle Pjdpfxszz H Tdj Alworb easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: good (used), Mobile shelving / sliding shelving system DEXION Manufacturer: DEXION Number of shelving units: 3 double-sided, 1 single-sided Permissible shelf load / floor load: 235 kg (91 kg on average) Permissible field load: 730 kg Pjdpfx Alozt Rpgjwsrb Maximum cart load: 5,840 kg Number of shelves stacked on top of each other: 8 units Evenly distributed permissible load

Condition: used, Year of construction: 2004, Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Technical data Dust extraction hood with ionization and rotating fan Length: 3500 mm Usable width: 1300 mm Overall width: 1579 mm Predpfx Aoz A S Ndolwob Working height: 860 - 940 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Sheet metal cleaning machine AWS Reini R60L Podpjz A Snyofx Alwsrb Automatic feed system For sheet metal dimensions 98 x 58 cm Suitable for 2, 3, and 4-sided sheet metal Dry cleaning Dimensions (L x W x H): approx. 80 x 60 x 105 cm High performance, up to 200 sheets per hour Easy operation, maintenance, and servicing Mobile on rollers (with locking function)

Condition: as good as new (ex-display), Year of construction: 2025, Special price *available upon request Pedpfjd Su Hxjx Alwjrb New: With the frequency converter option, up to 45% state funding is possible. Combination of: mütek briquetting press MPP 60 + extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected to each other 1. Technical data of briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery in 2 components possible Weight: approx. 1200 kg Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option cooling press clamp: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data of clean air extraction unit MMJET 350: Extraction port diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: as good as new (ex-display), functionality: limited functionality, machine/vehicle number: L62190, Używany system kontroli jakości Baumer HHS (Track & Trace / Code Reading Psdpfez A Uafsx Alwerb )Przedmiotem sprzedaży jest zdemontowany, używany system inspekcji i kontroli jakości marki Baumer HHS. System został zastąpiony nową konfiguracją i zdemontowany w pełni sprawny mechanicznie i elektrycznie. Doskonale sprawdzi się jako kompletny zestaw części zamiennych lub baza do rozbudowy/modernizacji istniejącej linii produkcyjnej (składarko-sklejarki, maszyny pakujące, systemy Bobst). Skład zestawu i specyfikacja techniczna Moduł wizyjny / Inspekcja: Zaawansowany moduł weryfikacji Track & Trace oraz Code Reading (czytanie i weryfikacja kodów).Głowica czytająca: Oryginalny, optyczny czytnik kodów kreskowych i kolorowych Baumer HHS CT 10.Obudowa i zasilanie: Kompletna, dedykowana szafa sterownicza Baumer HHS wraz z wewnętrzną architekturą elektryczną.Interfejs użytkownika: Przemysłowy monitor operatorski HHS.Sygnalizacja: Wieża świetlna (kolumnowa) informująca o statusie pracy linii i błędach.Okablowanie: Pełen zestaw wiązek kablowych zdemontowanych wraz z systemem. SYSTEM bez oprogramowania.

Condition: used, Refrigerant compressors system Bitzer -Type: 6G-40.2Y-40P (x5) -Volume: 126.8 m3/h (x5) -Cooling capacity for R404A: 513 kW at 0°C/40°C, 427 kW at -5°C/40°C, 351.5 kW at -10°C/40°C, 181.5 kW at -25°C/40°C -Dimensions: 3100 x 840 x 1950 mm -Tank dimensions: 1400 x 930 x 2780 mm -Items in magazine: 1 Pjdpfx Asz A R E Rjlwerb -Reference number: Z136 -Condition: Used, ready to work

Condition: used, Complete Industrial Filling, Weighing & Roller Conveyor System Complete industrial filling and container handling system, previously used in an industrial production environment. The system consists of a stainless steel filling station combined with powered roller conveyors, weighing/control equipment, and automated controls. Main equipment includes: Stainless steel filling station Powered roller conveyor system Mettler Toledo weighing and control equipment Mettler Toledo operator/control panels Siemens SIMATIC PLC control system Hitachi SJ200 frequency inverter Psdoz Diutjpfx Alwsrb SEW geared motors Vector Aandrijftechniek geared motors Stainless steel electrical/control cabinets Product filling connections and hoses Operator platform with stainless steel safety railing Local operator control panels Safety equipment and emergency stops Nomafast high-speed industrial door Associated electrical and mechanical equipment The system appears to have been designed for the automated handling, positioning, weighing, and filling of containers/drums in an industrial production process. Condition: Used industrial surplus Availability: Complete system as shown in the pictures Location: Rotterdam, The Netherlands The complete system is available for sale. Dismantling and loading can be discussed. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to make an offer.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Plastering machine EPA 479 with turning station, travel direction from left to right, computer and monitor renewed in 2023. Prjdpfx Aez Diztslwob

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 16-176-82, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 12 A, input frequency: 50 Hz, type of input current: AC, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Two used high-frequency (HF) machines from the manufacturer AMYSA-YVERDON SA, type AM 176, are for sale. These machines are particularly suitable as sources of spare parts, for retrofitting, or as a basis for a customized rebuild. They are offered in their current condition, as shown in the photos. Machine 1 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Machine number: 16-176-82 Voltage: 380 V / 50 Hz Power: 7.5 kVA Current consumption: 12 A Machine 2 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Machine number: 03-176-82 Voltage: 380 V / 50 Hz Power: 6.5 kVA Current consumption: 10 A The existing mechanical, hydraulic, and electrical components, as well as the installed control systems, are included in the offer. Prodpfsz A E Ersx Alwsb The HF generators and resonant circuits are not included in the offer. These are older, used industrial machines. Complete functionality is not guaranteed. An inspection can be arranged by appointment. The machines are currently being disassembled. Collection by the buyer at the location in the Basel region, Switzerland. Price: CHF 2,500 per machine, negotiable Package price for both machines available upon request. Sale from the location, without warranty and excluding any liability for defects.

Condition: used, mileage: 5,05,000 km, first registration: 03/2017, fuel type: diesel, fuel: diesel, Year of construction: 2017, VOLVO FH 500 Globetrotter XL 6x2 Roll-off Tipper with HYVA 20.60 body • Emission class: EURO 6 C • Power: 375 kW / 510 hp • VEB - Plus • I-Shift automatic transmission • Automatic climate control • Auxiliary heater • Differential lock • Hill start assist • Rear view camera • Adaptive cruise control • Lane departure warning system • Emergency braking assist • Leather seats • Air-suspended co-driver seat • Multifunction steering wheel • Refrigerator • Airbag • Radio/CD player / changer • CB radio • 2 bunks / beds • GVWR: 26,000 kg; 27,000 kg technically possible! • Unladen weight: 12,180 kg • Wheelbase: 4,600 mm • Tires: 315/70 R22.5 • ALCOA - Durabright rims • Good tire tread! • BODY: HYVA 20.60 • Container mounting for containers up to 6.80 m • Extendable underrun protection Pedszuvamepfx Alwsrb - German vehicle! - 1st owner! - TÜV (technical inspection): 07/2027 - Main inspection: 01/2027 Subject to errors and prior sale!

Condition: used, Year of construction: 2019, operating hours: 100 h, functionality: fully functional, type of input current: AC, input voltage: 220 V, input frequency: 50 Hz, TESA TESATRONIC TT20 Measuring System with GT-31 Probe The item for sale is a used TESA TESATRONIC TT20 electronic measuring system supplied with a TESA GT-31 lever-type inductive probe. The TT20 is designed for use with one or two TESA inductive probes. It supports individual measurements as well as sum and difference measurements, making it suitable for dimensional inspection, production control, workshop applications and metrology laboratories. PRODUCT IDENTIFICATION • Manufacturer: TESA Technology / TESA SA • Model: TESATRONIC TT20 • Display unit order number / Type No.: 04430009 • Probe model: TESA GT-31 Gage Head, 10P • Probe part number: 32.10802 • Country of manufacture: Switzerland • Applicable standard: DIN 32876, Part 1 • Number of probe inputs: 2 – channels A and B TT20 TECHNICAL SPECIFICATIONS • Number of measuring ranges: 7 Prodpfxswq Dp Do Alwob • Minimum selectable measuring range: ±5 µm • Maximum selectable measuring range: ±5000 µm • Display resolution: 0.1 µm • Measurement modes: channel A, channel B, sum and difference • Units: metric and inch • Range selection: manual or automatic according to the measured value • Response time of the analogue, digital and LED classification displays: ≤80 ms • Digital display holding time: 80 ms DISPLAY • Combined digital and pseudo-analogue LCD indication • LCD dimensions: 126 × 62 mm • Numerical display: 6 digits plus “+” or “–” sign • Digit dimensions: 12.5 × 6.6 mm • Pseudo-analogue scale length: 110 mm • Number of analogue scale divisions: 50 • Selectable pointer or bar-graph indication FUNCTIONS • Two probe inputs for single, sum and difference measurements • Manual or automatic measuring-range selection • Direct conversion between metric and inch units • Separate controls for each measuring channel • Programmable tolerance limits • Three-class value classification • Coloured LED tolerance indication with signal outputs • HOLD function for step-by-step measurement routines • Automatic recognition of compatible TESA probes manufactured from 1997 onwards • Bidirectional, opto-isolated RS-232 output • D-Sub In/Out connector • Power supply through an external mains adapter CATALOGUE DISPLAY VALUE LIMITS The following catalogue values apply at a temperature of 20°C and relative humidity of no more than 50%: • Analogue display: 2% • Digital display: 0.3% • Digital output: 0.3% These values refer to the TT20 display unit specification. They are not a current calibration result or a guaranteed accuracy value for this particular used set. DIMENSIONS AND CONSTRUCTION • Dimensions: 255 × 235 × 120 mm • Dimensions are specified as width × depth × height • Housing material: resistant plastic • Installation: benchtop workshop or laboratory use CONDITION Used equipment with visible signs of normal use and storage. The unit powers on, and the display and indicator lights operate as shown in the photographs. The display currently shows a selected measuring range of ±2000 µm. This is one of the available ranges and not the maximum capability of the TT20. The unit has not been subjected to a complete laboratory performance test. No current calibration or verification certificate is included. PACKAGE CONTENTS • TESA TESATRONIC TT20 display unit, Type No. 04430009 • TESA GT-31 lever-type probe, part number 32.10802, marked 10P • Connected cables shown in the photographs

Condition: good (used), Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 30,400 mm Number of bays / racking row: 09 units, each 3,600 mm Number of levels including base level: 02 units Technical data for volume: Pallet spaces per bay: 12 units Pallet spaces per racking row: 108 units Total pallet spaces: 108 units Based on: Load handling unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 600 kg Included in the scope of supply: 10x Pallet racking uprights, used Frame material color: RAL 5015 blue Brace material color: sendzimir galvanized Frame profile: PLFB 155 Profile dimensions: P 100 x 65 x 2.25 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 3,100 mm Depth: 1,100 mm 36x Pallet racking beam, new Material color: RAL 2004 orange Box profile: 140 x 50 mm Beam type: PNB0414|2 Agraffe: 4 HK (hooks) Clear width: 3,600 mm Pedpfsz Dglvox Alwsrb Max. load per beam pair 2,400 kg with evenly distributed load 72x Locking pin, new Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting 40x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2017, Uncompromised performance and precision: The G3 digital cutting system is based on the most flexible, adaptable, and easily expandable machine concept on the market. Operating hours 2.700 Tools Camera New PC - touch screen UCT KCT EOT-250 CTT1 CTT2 VCT Router 1Kw Diverse Creasing wheels Diverse perforating knives Belt replaced in 2025 Zund Cut Center updated 2026 Vacum pump replaced in 2026 Prodozu Av Uepfx Alwjb In production, demo possible upon request

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Predpodzqn Uefx Alweb Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7x-1245., overall weight: 10 kg, Equipment: documentation/manual, type plate available, Proliner 7x device, serial number 7x-1245. Condition: used, like new, complete set. Year of manufacture: November 2023. 1 owner. The device was used for measuring glass wall cladding. Includes tripod, template attachments, backpack, remote control, wheels for moving the device, 2 batteries, and a charger. Net price negotiable, call 795503436. Pjdjz D Abtopfx Alworb