Used Webo for sale (25)

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Itodpfx Aasfbt Husner Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: good (used), functionality: fully functional, 4-speed transmission speed from 180 to 2000 rpm motor power 0,75kW drilling depth limiter Itedpsvcb Ntefx Aaner up/down adjustment

Condition: good (used), functionality: fully functional, mount diameter: 80 mm, throat depth: 200 mm, spindle mount: MK 1, table width: 320 mm, table length: 250 mm, stroke length: 70 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, Equipment: lighting, type plate available, Drilling machine, drilling machine, stand drilling machine, column drilling machine -Manufacturer: Webo, G6 column drilling machine -Motor: 0.75kW 380v 50 Hz morse MK-1 chuck max drill size: M6 -Gearbox: with flat belt coolant pump automatic-manual operation spindle speed per minute -Table size: 320 x 250 mm -Spindle stroke: 70 mm -Reach: 200 mm -Column Ø: 80 mm -Dimensions: 450/600/H1800 mm -Weight: ca 190 kg Itedpjwzaqxsfx Aansr

Condition: used, Technical details: bore capacity in steel (diameter): 30 mm bore stroke: 180 mm drill spindle - Morse Taper: 4 x MK 3 spindle throat: 310 mm spindle distance: 490 mm number of drilling stations: 4 headstock adjustment: 300 (manuell) mm feed:: 0,08 - 0,64 / 6 step mm/U spindle speed:: 50 - 1.215 / 19 step U/min distance between table/spindle: max./min.: 500 / 200 mm table surface area: 1820 x 395 mm table adjustment: Höhe: 300 (manuell) mm total power requirement: 4x 1,5 (6,0 kW) kW weight of the machine ca.: 2,8 t dimension machine xH: 2,1 x 1,1 x 2,75 m Further technical data: -Center distance of the drilling spindle 490mm Itodpfsu Idu Hex Aanjr -thread cutting on drilling columns 3 and 4 with automatic switchover -All drilling spindles run with clockwise and counter-clockwise rotation -spindle countershaft and variator -with coolant system *

Condition: used, Year of construction: 1980, 1980 tool taper MK Iedper Dv Tgofx Aanetr 205 - 1450 m/min. boring range: 3 - 40 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1970, Webo Gradua 40 Column Drilling Machine Details: Drilling capacity in steel (diameter): 40 mm Throat: 360 mm Drilling stroke: 240 mm Tool holder: MT 4 Speeds: 56 - 1250 rpm Drill motor: 2.0 / 2.4 kW Feeds: 0.12 - 0.19 - 0.26 - 0.4 mm/rev Table size: Ø 625 mm Column diameter: 240 mm Drill head vertical adjustment: 400 mm Total power requirement: 2.5 kW Space requirement approx.: 1.1 x 0.8 x 2.3 m Ijdpfx Asxq S Ireanjtr Machine weight approx.: 1100 kg Control: conventional The machine was in operation until dismantling. Pickup in 75053 Gondelsheim. Forklift available for loading. Shipping by freight carrier possible; please inquire with your postcode.

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Itsdpfx Aaoqa Txqjnor Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: excellent (used), bore capacity in steel (diameter) 35 / 45 mm throat 330 mm bore stroke 200 mm morse taper MK 4 table diameter 600 mm spindle turning speed - stepless 80 - 1800 U/min table adjustment - upper 450 mm spindle stroke 400 mm total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,5 x 1,2 x 0,8 m automatic feed. Itsdpfx Aasunt Rpjnjr

Condition: used, bore capacity in steel (diameter) 40 mm Iedexddtyjpfx Aanetr throat 380 mm bore stroke 160 mm 4 speeds 60 - 1250 U/min total power requirement 3,3 kW weight 900 kg Features: -Gear drilling machine with a robust design -Column-mounted drilling table -Right/left rotation -Feed -Coolant system

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm Isdpfsu Id Dbox Aanjtr arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: good (used), T-slot clamping plate for a radial drilling machine Dimensions L x W x H: 2500 x 1130 x 260 mm T-slot width: 20 mm Number of T-slots: 3 T-slots not continuous across the entire length Weight: approx. 2 t Ijdpfx Aev N Et Nsanotr Siegfried Volz Machine Tools Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm throat: 100 mm spindle turning speed range: 6300/9000 rpm engine: 380 V, 0,18 kW Ijdpfofnbgqox Aanstr space needed: 470 x 250 x 520 mm weight: 39 kg

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm Isdpfoihmwtsx Aanotr throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: used, bore capacity in steel (diameter) 23 mm throat 310 mm bore stroke 150 mm turning speeds 90 - 2000 U/min 420 x 360 mm total power requirement kW / Volt Itsdpevkixrsfx Aansr weight of the machine ca. 650 Kg dimensions 1,2 x 0,8 x 2,4 mm Bench drill - Left/right rotation - Advance - Base frame

Condition: good (used), Boorcapaciteit in staal (diameter) 30 mm Boorslag 170 mm Fastening MK 4 Sheet dimensions 750 x 550 mm Toerental 70 - 1750 omw/min Iodpfxevgb Eij Aanjtr

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm arm length 1000 mm workpiece height max. 1400 mm total power requirement 6 kW weight of the machine ca. 3.700 kg Ijdpfxst H Smyo Aanotr dimensions of the machine ca. m

Condition: used, bore capacity in steel (diameter) / mm arm length / mm workpiece height max. / mm total power requirement / kW weight of the machine ca. / t Itjdpfx Aasud Ttnsnjr required space / m Table dimensions: 800x800mm Height: 590mm

Condition: used, Drill press, drill press, stand drill, pillar drill Isdefv Ungjpfx Aanotr -Manufacturer: Webo, pillar drill -Motor: 0.37 kW -Translation: via flat belt -Table size: 295 x 295 mm -drill chuck: 0 - 10 mm/B12 -Spindle stroke: 70 mm -Projection: 150 mm -Pillar Ø: 80 mm -Dimensions: 500/700/H1800 mm -Weight: 244 kg

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Itedpfeu T Ty Hex Aansr Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, bore capacity in steel (diameter) 40 mm throat 360 mm bore stroke 135 mm taper MK 4 MK table-size 630 mm feeds ja mm/U turning speeds 120 - 1120 U/min total power requirement 2,4 KW weight of the machine ca. 0,9 t dimensions 1,2 x 0,8 x 2,75 m Iodpfxjm Rlavj Aanotr

Condition: good (used), Year of construction: 1971, Webo BR 35 V / 1250 Radial Drilling Machine Working Area Distance from spindle to column: smallest 280 mm / largest 1250 mm Iodpeihfw Njfx Aanotr Distance from spindle or drilling distance to table top: smallest 0 mm / largest 900 mm Distance from spindle to base plate: smallest 200 mm / largest 1400 mm Drill diameter: smallest 860 mm / largest 2800 mm Swivel range: 2,200 mm / clamping diameter approx. 240 mm Clamping area: upper 650 x 500 mm / side 770 x 500 mm Drill spindle diameter 40/85 mm Speed: 30 - 1800 rpm Year of manufacture: 1971 For further technical data, please refer to the machine card. Item condition: used, immaculate, and well maintained. Auction items: Only the Webo BR 35 V / 1250 without the reversible clamp shown. This can be purchased individually or as a bundle in our other auctions. You can find more metalworking machines – new and used – in our shop! International shipping costs on request!

Condition: used, number of spindles 4 bore capacity in steel (diameter) 23 mm bore stroke 150 mm total power requirement kW Iodjt Hw U Nspfx Aanstr weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Speed / U/min. Arm length / mm Isdpfjithz Usx Aanotr Motor output / kW

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm Isdsd Tm Hnspfx Aanjtr -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Condition: used, Year of construction: 1974, Bohrleistung in Stahl (-Ø 35 mm throat 1000 mm workpiece height max. 200 - 1400 mm height adjustment 745 mm base plate surface area 1200 x 930 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 4 bore spindle stroke 350 mm turning speed range 60 - 1850 U/min Itsdpfxetv Igts Aansr feed range 0,09 - 1 mm/U power capacity 3,7 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m Cube table 800 x 800 x 650 mm Coolant device