Used Steam Boiler Omnical 6000Kg/H -13Bar for sale (56,409)

Condition: used, Spirax Sarco Clean Steam Generator Station – 700 kg/h – Year of Manufacture 2019 For sale is a steam-heated clean steam generator station from the manufacturer Spirax Sarco with a clean steam capacity of approximately 700 kg/h. The system consists of a horizontal clean steam generator with an integrated tube bundle heat exchanger, a condensate cooler for feedwater preheating, and a fresh water feed via a control valve. Technical Data Manufacturer: Spirax Sarco GmbH System Type: Clean Steam Generator Station Serial Number: 2019/955 Year of Manufacture: 2019 (according to serial number, to be confirmed) Clean Steam Capacity: approx. 700 kg/h Clean Steam Pressure: 0.8 bar(g) Heating Steam Quantity: approx. 770 kg/h Heating Steam Pressure: approx. 3.5 bar(g) Total Power Output according to Design Data: 531 kW Feedwater Inlet: 15 °C Minimum Feedwater Pressure: 2 bar(g) Feedwater Quality: according to EN 285 Clean Steam Generator Design: horizontal, with pull-out U-tube bundle Fsdpjwgkyhefx Ap Dopn Design Pressure, Tube Side: 10 bar Design Pressure, Shell Side: 3 bar Design Temperature: 200 °C each Diameter: approx. 711 mm Length: approx. 2,600 mm Height: approx. 1,400 mm Thermal Output: 452 kW Tube Bundle: Stainless steel 1.4571 Insulation: approx. 100 mm mineral wool with galvanized steel sheet cladding Condensate Cooler / Feedwater Preheating Type: Plate heat exchanger Type: Alfa Nova 27-10H Manufacturer: Alfa Laval Capacity: 61 kW Design Pressure: 25 bar Design Temperature: 225 °C Condensate Quantity: approx. 770 kg/h Feedwater Quantity: approx. 700 kg/h Equipment Control cabinet and control system Electropneumatic pressure control valve Safety and shut-off valves Condensate trap and drain group Pressure sensors and manometers Level control with low water alarm Piping and connecting fittings Base frame with support saddles The system was designed and manufactured in accordance with the European Pressure Equipment Directive applicable at the time of manufacture. Further technical documentation is available upon request. Inspection possible by appointment.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater, 54.74 kW, Heating Capacity 5830 m³/h UDSA Gas-Fired Warm Air Heater – Efficient, even at peak loads The most well-known product from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install unit is available in 14 sizes, ranging from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room itself. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, including the gas and exhaust connections, must only be carried out by an approved installation company. The gas-fired warm air heaters are suitable for: Fpodpfxowb A Hie Ap Den - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L, with day-night-week program - Exhaust discharge via the roof, version B or C - Exhaust discharge through the outer wall, version C Gas-fired warm air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m³/h Protection class: IP20 Pin No. 0461BN0677 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: reconditioned (used), functionality: fully functional, empty load weight: 119 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, temperature: 85 °C, KARCHER HDS-E 8/16-4M 12kW HOT WATER PRESSURE WASHER The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. The machine has only 299 hours of operation. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 760 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Fully electric water heating allows operation in areas where exhaust emissions are prohibited. Each device we offer is individually photographed; you're buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 760 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 85 Fodpfx Aezrxh Iep Dspn Heater power [kW]: 12 Connection power [kW]: 17.5 Cleaning agent tank [l]: 10 + 20 Hose length [m]: 10 Weight [kg]: 119 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine User-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: excellent (used), Year of construction: 2011, operating hours: 39,090 h, functionality: fully functional, machine/vehicle number: 14390, travel distance X-axis: 1,350 mm, travel distance Y-axis: 970 mm, travel distance Z-axis: 1,300 mm, total height: 4,150 mm, total length: 8,500 mm, total width: 5,500 mm, overall weight: 32,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, operating hours of spindle: 8,407 h, coolant supply: 80 bar, spindle motor power: 30,000 W, spindle nose: HSK-A100, number of slots in tool magazine: 60, Equipment: chip conveyor, Travel ranges Travel range X: 1350 mm Travel range Y: 970 mm Travel range Z: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 Kg Horizontal/Vertical Milling Support Working spindle Diameter at the front bearing: 110 mm Drive power: (60% ED) 30 kW Drive power: (100% ED) 29 kW Torque: (60% ED) 1088 Nm Torque: (100% ED) 985 Nm Spindle speed: 20…6000 rpm Spindle taper: HSK-A100 NC rotary table with 500 rpm Table speed for positioning operation up to 60 rpm Table speed for turning operation up to 500 rpm Operation at 100% duty cycle with speed >200 rpm max. 20 min Workpiece diameter incl. fixture 1400 mm Workpiece height: 1400 mm Workpiece mass incl. fixture up to speed of 60 min-1 2000 kg Workpiece mass incl. fixture above speed of 60 min-1 1200 kg Tangential moment 10000 Nm Tilting moment 20000 Nm Drive power (100%ED) 57 kW Drive torque (100%ED) 2520 Nm Machine is equipped with an automatic imbalance detection system Tool changer: 60 positions Max. tool diameter: 325 mm Max. tool length: 450 mm Max. tool weight: 35 Kg Internal coolant supply through the spindle center up to a maximum of 80 bar In addition: - Coolant gravity belt filter by Knoll - Chip conveyor Knoll - HYFRA industrial cooling system - 1x special pallet for turning with 4 jaw chucks 50-2 D1000mm - 1x exchange pallet with T-slots 800x1000mm - 3x exchange pallet with threaded holes DIN55201 800x1000mm - Pallets without workpiece clamping devices - Electronic handwheel - Optical measuring probe OMP60 by Renishaw Net machine weight with H/V support approx. 32500 kg Space requirement approx. (L x W x H) 8500x5500x4150mm Fpedpfxsz Nc Eio Ap Don Technical data subject to change without notice. Errors and prior sale reserved.

Condition: used, cooking length 4.000 mm Fjdpfxez Nd H Ne Ap Depn belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the belt dimensions (l x w x h) : ± 6.200 x 1.700 x 2.200 mm adjustable speed

Condition: good (used), Pneumatic filling machine with filling arc Function The machines operate according to the piston principle: suction – discharge. One or two dosing pistons are driven by pneumatic cylinders. The desired filling volume is adjusted via a handwheel on a scale on the machine. ■ Pneumatic volumetric piston dispensers ■ Filling capacity: 300-800 pieces/hour ■ Dosing accuracy: +-0.5% ■ Immediately ready for operation, easy to use ■ Easy to clean ■ Filling range: 8 - 80 ml / interchangeable cylinders ■ Self-priming Fpodpfjrt Un Esx Ap Don ■ Easily transportable for various locations Areas of application: Production and laboratory Chemical industry - cosmetics industry Food and pharmaceutical industry Paints and coatings industry Type: H 80-P-MV Filling range: 8 - 80 ml Fillings: 300 - 800 per hour You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per shelf and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 37.00 m - Shelf load capacity: 2,000 kg per shelf - Bay load capacity: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue painted - Levels: ground + 3 beam levels - Pallet spaces: 160 including ground spaces - Version: Used Jungheinrich MPB SCOPE OF DELIVERY: - 11 × Uprights, approx. 520 × 110 cm, pre-assembled - 60 × Beams, approx. 360 × 12 × 5 cm - 120 × Safety pins PRICE: €3,750.00 net €4,462.50 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optional - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible Fedpfoz Iw Hfsx Ap Djpn PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new construction, renovation, or expansion – we will provide you with competent advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions on site. Many systems are set up and can be experienced directly. Our specialist consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND WHAT YOU'RE LOOKING FOR YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us by message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 27,157 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,200 kg, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2015. It features a maximum spindle speed of 18,000 rpm and a table size of Ø 800 mm, with a maximum table load of 1,200 kg. The machine includes a 96-fold tool changer and advanced Heidenhain control unit. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details. - Swivel Range: -120 to +120 degrees- Rotary Table: 360 degrees continuous- Spindle: Coolant Through Spindle (CTS / IKZ) 70 bar with belt filter unit- Table Size: Ø 800 mm (Kessler Table)- Tool Changer: 96-fold HSK-A 63- Linear Measuring System: Heidenhain XYZ with purge air- Switch Cabinet Cooler: Active Air-Air- Connected Load: 90 kVA- Full Load Current: 125 A- Max Current Load: 200 A- Voltage: 400 V, 50 Hz- Operating Hours Control On: 27,157 h (as of end 2025)- Operating Hours Program Run: 21,340 h (as of end 2025)- Additional Equipment: - Oil cooling for 4th and 5th axis, controlled - Regulated spindle cooler - Heidenhain Rotary Measuring System - Heidenhain Kinematics Module incl. Reference Sphere - External hinged belt chip conveyor - Coolant pump at head via M-functions - Chip flush device pump - Electromechanical oil/coolant separator - Automatic coolant level monitoring - Tool changer rear operation with display - Tool changer protective door - 3-fold hydraulic connection in table center - 1-fold air connection in table center - Coolant unit temperature control - Workpiece measurement preparation - Infrared workpiece measurement - 3D Touch Probe - Tool measurement via BLUM laser (Laser bridge) - Heidenhain DCM collision module- Automation System: FCS RP 400 Pallet Automation (Commissioned Early Sept 2018)- Pallet Positions: 12- Pallet Size: 400 x 400 mm- Max Transfer Weight: 500 kg Fjdjz Ixtmopfx Ap Dspn Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 359 g, mold height (min.): 250 mm, plate length: 695 mm, plate width: 695 mm, total length: 5,205 mm, total width: 1,670 mm, total height: 2,200 mm, overall weight: 6,500 kg, Clamping force: 150 t Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Opening stroke: 400 mm Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Accumulator Fpsdpfx Apjz Iz Exs Don Frequency converter Hidrive drive 4 x pneumatic valve

Year of construction: 2003, condition: used, functionality: fully functional, maximum load weight: 100 kg, total length: 1,965 mm, total width: 1,970 mm, total height: 2,550 mm, loading space volume: 2 m³, machine/vehicle number: 03108, Heavy-Duty 100 kg Steam-Heated Industrial Tumble Dryer for Garment & Textile Processing The Triveneta Grandi Impianti E/100 R.V. is a heavy-duty industrial steam-heated tumble dryer manufactured by Triveneta Grandi Impianti S.r.l., Italy. Designed for continuous industrial laundry and textile finishing operations, this high-capacity dryer is ideal for garment manufacturing, denim production, commercial laundries, and other high-volume drying applications. This unit (MASI internal reference K672) was used in professional apparel production until the factory shutdown and remained operational. Technical Specifications • Manufacturer: Triveneta Grandi Impianti S.r.l. • Model: E/100 R.V. • Machine Type: Industrial Steam-Heated Tumble Dryer • Serial Number: 03108 • Year: 2003 • Country of Manufacture: Italy • Maximum Load Capacity: 100 kg • Heating System: External Steam Supply • Power Supply: 400 V, 3-Phase, 50 Hz • Machine Weight: Approximately 1,450 kg Fpodpfszmwdkjx Ap Don • Dimensions: • Width: 1,970 mm • Depth: 1,965 mm • Height: 2,550 mm Key Features • High-capacity industrial drying drum • Steam-heated drying system • Digital microprocessor control • Programmable drying cycles • Pneumatic door opening system • Stainless steel front loading door • Twin exhaust and ventilation system • Integrated lint filter housing • Emergency stop system • Heavy-duty industrial construction • Designed for continuous production environments Includes • Triveneta Grandi Impianti E/100 R.V. tumble dryer • Integrated microprocessor control panel • Steam connection interfaces • Lint filtration system • Pneumatic door system • Industrial support frame Applications • Garment manufacturing • Denim production • Industrial laundry operations • Textile finishing • Commercial laundry facilities • Industrial garment drying • High-volume textile processing Condition • Fully operational prior to factory shutdown • Previously used in professional garment production • Good industrial condition • Structurally complete • Normal cosmetic wear consistent with industrial use • Minor surface oxidation around the door frame • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, electrical, and utility connections, dismantling, loading, transportation, and all related costs. Professional rigging and lifting equipment are recommended due to the machine's approximately 1.5-tonne weight. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete industrial laundry and finishing line.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 16,066 h, load capacity: 3,500 kg, lifting height: 5,990 mm, fuel type: gas, mast type: simplex, construction height: 3,650 mm, fork carriage width: 1,150 mm, empty load weight: 5,382 kg, total length: 2,570 mm, drive type: Treibgas, construction width: 1,350 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Fodpfxsz Ivirs Ap Depn Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x12.5-15 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 20 - 40% Battery year of manufacture: 2021 Dual auxiliary hydraulics, fuel tank, full cab, heater, air conditioning, blue spot, 4x front work lights, 1x rear work light.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 520 h, load capacity: 2,000 kg, lifting height: 4,350 mm, fuel type: diesel, mast type: telescopic, construction height: 1,960 mm, power: 42 kW (57.10 HP), fork length: 1,200 mm, empty load weight: 4,190 kg, total length: 3,640 mm, drive type: Diesel, construction width: 1,490 mm, Telescopic forklift, rigid Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Telescopic Speed class: 25 Condition: Like new Technical condition: very good Front tire type: Pneumatic Fsdpszx Iyajfx Ap Depn Front tire size: 12-16.5 145A2 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12-16.5 145A2 Rear tire condition: 80 - 100% Rear work light, front work light, heater, dust filter, full cab, air conditioning, full free lift, CE certificate, interior mirror, exterior mirror, rotating beacon, LED, seat.

Condition: used, functionality: fully functional, machine/vehicle number: P177B10626U, Year of construction: 2020, operating hours: 7,695 h, load capacity: 2,500 kg, lifting height: 3,290 mm, free lift: 140 mm, fuel type: gas, mast type: duplex, construction height: 2,170 mm, power: 44 kW (59.82 HP), fork carriage width: 1,165 mm, fork length: 1,200 mm, empty load weight: 3,930 kg, total length: 2,560 mm, drive type: Treibgas, construction width: 1,160 mm, Internal combustion forklift Chassis number: P177B10626U Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Electronic Powershift Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Fedpeynhbkofx Ap Dopn Front tire size: 7.00 x 12/5.0 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 6.0 x 9/4.0 Rear tire condition: 60 - 80% Description: Hydraulic controls via manual levers, direction switch integrated into the dashboard, panoramic mirror, handle for reversing including horn, fire extinguisher, brake lights, tail lights, turn signals, and reversing lights, swiveling fuel tank mount 3rd valve, work light rear, work light front, roof protection, CE certificate, interior mirror

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 330 h, load capacity: 2,500 kg, lifting height: 5,900 mm, free lift: 5,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,000 mm, power: 55 kW (74.78 HP), fork carriage width: 1,020 mm, fork length: 1,200 mm, empty load weight: 5,800 kg, total length: 3,900 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic forklift, rigid frame Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Telescopic Speed class: 20 Condition: Like new Technical condition: very good Fpjdpsz I H Niofx Ap Dsn Front tire type: Pneumatic Front tire size: 300/75 R18 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 300/75 R18 Rear tire condition: 80 - 100% 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cabin, full free lift, CE certificate, LED, seat, rotating beacon, LED work light, sun visor, rearview mirror, interior rearview mirror

Condition: used, Year of construction: 2017, operating hours: 13,853 h, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, power: 55 kW (74.78 HP), Year of manufacture: 2017 Empty weight: 8.470 kg Lifting capacity: 4.500 kg Number of valves: 3 CE mark: yes General condition: average Technical condition: average Visual appearance: average Fpodpfx Aoz I A Syop Djn Mast type: triplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Free lift - Pneumatic shaped solids - Roof window = More information = Make of engine: Kubota Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, working width: 430 mm, area performance: 1,935 m²/h, overall weight: 160 kg, water tank capacity: 40 l, TASKI SWINGO 755B Scrubber-Dryer New SIAP 12V 85Ah gel batteries (2x) New NEOS 24V 10A charger 2018 model 430mm cleaning head equipped with a new medium-stiffness disc brush, suitable for use on any surface. New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances. Suction motor ensures high water recovery power from the squeegee tool. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 430 Squeegee working width (mm): 690 Theoretical coverage (m²/h): 1935 Brush pressure (kg): 32 Tank capacity (l): 40/40 Machine weight ready for operation (kg): ~160 Fedpfjz Ix I Dox Ap Djpn Dimensions (L x W x H) (mm): 1160 x 475 x 1195 INCLUDED: NEW SIAP 12V 85Ah GEL BATTERIES (2x) NEW NEOS 24V 10A CHARGER NEW 430mm PPL0.8 disc brush 24V 500W vacuum motor Squeegee assembly with oil-resistant blades Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 40-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills. The machine's design makes it highly maneuverable. Its tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. The wide working width (430mm) ensures high area coverage. Highly legible and intuitive control panel.

Condition: used, functionality: fully functional, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) This state-of-the-art 4-pipe heat pump has been specifically developed for the flexible, simultaneous or independent provision of chilled and hot water. Thanks to cutting-edge inverter technology and the environmentally friendly refrigerant R290, the unit offers maximum energy efficiency with a minimal environmental footprint. The device features robust enclosure panels and integrated sound insulation in the compressor compartment to ensure extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the unit is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Intelligent operating modes for maximum energy savings • Flexible 4-pipe logic system: Complete hydraulic separation of air conditioning and domestic hot water (DHW). The control system regulates the pumps fully automatically as needed and allows for exclusive DHW activation via a digital input. Fjdpfez Ix D Sex Ap Dspn • Highly efficient combined cycle (simultaneous operation): • In cooling mode: When DHW is required, the system utilizes complete heat recovery. It provides free hot water while the fan stops. • In heating mode: The system prioritizes DHW production and automatically switches back to room heating once the setpoint is reached. • On-demand individual operation: Efficient single-mode operation for cooling, heating, or hot water only, with precise inverter control to avoid partial load losses.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,847 h, load capacity: 3,000 kg, lifting height: 4,955 mm, free lift: 1,450 mm, fuel type: gas, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Fpjdpfezhp Iqjx Ap Don Rear tire condition: 80 - 100% Description: Workshop inspected, new UVV & inspection, new paint job Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, half cab, load guard, full free lift, CE certificate.

Condition: used, Year of construction: 2019, operating hours: 808 h, Wacker Neuson ET16 mini excavator, manufactured in 2019, with only 808 operating hours! ---- * Manufacturer: Wacker Neuson * Model: ET16 * Year of manufacture: 2019 * Operating hours: approx. 808 * Operating weight: approx. 1,715 kg * Includes 2 buckets * Fully enclosed cabin * Extendable undercarriage * Very good rubber tracks! Fodpfx Aez Rkwwjp Dopn * Video available upon request * Price: €12,900, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp ?All information without guarantee. Errors and prior sale are reserved.?

Condition: new, functionality: fully functional, operating pressure: 150 bar, empty load weight: 198 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM 1017 PRESSURE WASHER TECHNICAL DATA: Model: KRANZLE THERM 1017 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1000 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 5.5 Weight with accessories (kg): 193 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1015 Fpjdpfsy R Tzpsx Ap Don KRANZLE THERM 1017 WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) Spray lance: KRANZLE (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m Professional-Class Pressure Hose WHY CHOOSE THE KRANZLE THERM 1017? The THERM 1017 is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1017 model suitable for use in a wide range of industries. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1017 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a power nozzle. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: used, functionality: fully functional, power: 44 kW (59.82 HP), fuel type: diesel, operation weight: 6,900 kg, Year of construction: 1995, operating hours: 2,700 h, Liebherr L508 / FUG 93 wheel loader Year of manufacture: 1995 2,700 operating hours Fpsdpfswxtnrox Ap Dsn Approx. 6,900 kg 44 kW Deutz 4-cylinder engine 3rd hydraulic circuit 25 km/h road approval Transport dimensions: 5.85 x 2.0 x 2.85 m

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Equipment: - Welded frame - 6 lashing points - Multiplex walls Net: €6,147.06 / Gross: €7,315.00 Article number: SPH227331818.02 Technical data: • Brand: Hapert Trailers • Model: Sapphire H-2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration Fpjdezu N Rfjpfx Ap Dsn • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 331 x 176 x 180 cm • External dimensions (L x W x H): 469 x 184 x 247 cm • Loading height of the floor: 64 cm • Permissible total weight: 2,700 kg • Unladen weight: 744 kg • Payload: 1,956 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and walls made of multiplex • Reinforced, sturdily screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame is very torsion-resistant due to its stable design • 6 lashing eyes recessed inside the side frame (1000 DaN/kg), TÜV certified! • Battery - interior light, for free positioning • 2-wing rear door with stainless steel rotary latch, lockable • 2 maneuvering handles at the front • Maintenance-free rubber spring axles from KNOTT • Reverse automatic • KNOTT overrun device and parking brake • Very stable, screwed V-drawbar • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, Flow steam generator with 33 kw/h Capacity: 50 kg/h steam Strom / Volt: 400 capacity / hour ca.: 50 customs no.: 84022000 Fpsdpfsz Ri N Ssx Ap Dsn

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB Fsdpez Rmbfsfx Ap Djpn SCOPE OF DELIVERY: - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, Year of construction: 1983, max. wheel diameter 1500 mm gear width 550 mm Fpodpfx Aoyq Szaep Don max. module 25 min. module 2 workpiece weight max. 6000 kg max. number of teeth 432 min. number of teeth 12 table diameter 990 mm grinding wheel size 400 mm total power requirement 75 kW weight of the machine ca. 20,5 t With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team