Used Steigerbuizen Scaffolding Tubes for sale (2,046)

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Pgedeip Utaopfx Alwet Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2016, condition: as good as new (ex-display), Round industrial tent, brand SUIHE, new, model: XL-308515R, year of manufacture 2016 Dimensions: width 9.15 m x length 26 m x height 4.57 m Structure: galvanized steel structure, Φ60*1.8mm and Φ40*1.5mm, made of Q215 steel tubes, according to GB/T700-2006 standard. Tarpaulins: PVC material thickness 300g PE, double fabric covered with PVC, factory colors: green or white. Access door type: simple mechanical door Door dimensions: 3.5 m x 3.5 m Snow resistance: 2.28 kpa (Compressive stress at a deformation) Wind resistance: 80km/h Standard duration of use: more than 15 years. Uses: industry, agriculture, material storage, car storage, hangar, Increased resistance, easy to assemble and disassemble, large capacity, excellent stability. The tent material is green with white. Model dimensions in meters: XL-308515R 9.15*26*4.59 (W*L*H (m)) 300g PE Metal box packaging Transport metal box dimensions 2.95m*0.75m*1.18m Tent weight: 1300kg Use of SUIHE industrial tents: 1. Agriculture: shelter for animals and storage space for hay. 2. Aviation: hangar for planes 3. Space for storing machines, industrial equipment, temporary hall 4. Navy: ship storage, containers 5. Garage for vehicles etc. PRICE 8.500 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Pgedpfei Hc Drox Alwot

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Pjdpfx Ajzdrufjlwogt

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice Pjdpfszzhfuex Alwegt * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: ready for operation (used), Year of construction: 2023, laser power: 1,20,000 W, This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with 120 W power and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information. • Work area: 610 x 305 mm (24" x 12") • Maximum material thickness: 10 mm (varies by material) • Laser power: 120 W • Repeatability: ±0.01 mm • Resolution: 1,000 dpi • Control software: JobControl® Vision • Material handling: removable table for thick objects • Exhaust system: integrated extraction system • Connectivity: USB, LAN • Supported materials: wood, acrylic, plastics, glass, leather, paper, textiles, and more Pjdpfx Aox I S Nyslwegt • Cooling: air-cooled laser tube • Interface: color touchscreen • Safety features: protective cover with interlocks Technical Specification Engraving Speed 3000 m/s

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total width: 3,000 mm, total length: 16,000 mm, total height: 2,500 mm, power: 20 kW (27.19 HP), overall weight: 21,000 kg, input voltage: 380 V, This machine is designed to manufacture square-bottom paper bags with flat-rope handles from a paper roll, a paper patch roll, and a flat paper rope. It is ideal for quickly producing paper handbags. By implementing steps including handle making, handle application, tube forming, tube cutting and bottom forming in a fully automatic process, as well as a special bag counting function, the efficiency of packing finished paper bags is greatly improved. Thanks to its advanced technology and fast production speed, this machine can produce high-quality paper handbags in many different forms, which are especially suitable for the food and clothing industries. Pjdjzt Rwdopfx Alwegt

Condition: used, Year of construction: 2008, operating hours: 5,300 h, functionality: fully functional, turning length: 740 mm, turning diameter over cross slide: 350 mm, spindle motor power: 21 W, travel distance X-axis: 340 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 600 mm, overall weight: 6,900 kg, Equipment: documentation/manual, Gildemeister CTX 410 V4 Universal lathe Control system: Fanuc 32i Main drive: 21 kW, 240 Nm Turret: Sauter Year of manufacture: 2008 Travel distances: X-axis: 340 mm Y-axis: 40 + Z-axis: 600 mm 1 chip conveyor Pgsdszzzqqspfx Alwst Tailstock Hydraulic hollow chuck, maximum draw tube inner diameter 66 mm Automatic sliding shield operation Option: Enhanced coolant pump, 12 bar, 23 l/min Coolant gun 3-jaw chuck BRD210, SMW Autoblock Foot switch for tailstock operation Tooling available upon request Documentation and export possible for an additional charge. Inspection possible while the machine is powered on. We would be happy to send you further details or arrange an on-site inspection.

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 4000x2000mm Control - FSCUT 5000 Software - Cypnest+Hypcut, Tubest + Tubepro Laser head - Boci BLT442 Nitrogen proportional valve - Oxygen, nitrogen, air Power stabilizer - 120kVA Water chiller - Hanli Load capacity up to 3200kg Pgodpfx Alownqydewjt Laser power - 12,000 W Cutting area - 4050x2030mm Tube cutting area - Outer diameter: 15-240mm Length: max. 6000mm Weight: max. 200kg X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum travel speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 5000 Power supply - 380V 50Hz three-phase

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 * for three-axle unit with 385/65 R22.5 tires * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame Pgodpfxszz Umxo Alwst * 4 pairs of stanchio

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Pgedpfxeutz Uye Alwst Additional systems Control cable for lift axle from the driver's cab Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: used, functionality: fully functional, USED ERCOLINA CE50MR3 MANUAL ROLL BENDER, WITH THREE ROLLERS FOR PROFILES Pgodpfx Alsz A Acuswjt

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,614 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,200 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 🕓 Years of experience | 🧰 Own service & paint shop | 🚛 In-house transport | 🤝 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts, serving clients all over Europe — from small businesses to large industrial plants. Our forklifts are more than just machines — they ensure smooth, safe, and efficient logistics. 🌟 Why choose us? ✅ Full technical inspection (service, filters, oils, key components) ✅ Optional UDT safety certification ✅ In-house paint & repair workshop ✅ EU-wide delivery by our trained drivers ✅ Operator training & test on delivery ✅ Full post-sale service & spare parts ✅ Financing available – invoice in EUR or PLN ✅ Hundreds of satisfied European clients Pgedoz Daymopfx Alwst 🚜 OFFER: COMBILIFT C4000 – Four-way / Multi-directional Forklift 📅 2019 | ⏱ 5,614 h | ⚙️ GAS | 🏋️ 4,000 kg | 📏 Duplex Mast 4,600 mm 🔩 Fork positioner 1,150 mm | Forks 1,200 mm 🛞 Superelastic tyres (100%) | Free lift 2,200 mm 💯 Condition: Excellent – fully serviced & tested 📐 Dimensions: H: 2,400 mm | L: 2,400 mm | W: 2,250 mm Ideal for narrow aisles, long loads, wood, steel, or tube industries — suitable indoors & outdoors. FT LOGISTICS – Quality you can rely on. Service you can trust. 💼

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Pgjdpey Auhzsfx Alwst Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: excellent (used), Year of construction: 2022, operating hours: 54 h, functionality: fully functional, machine/vehicle number: 3W2I324202513, Equipment: charge status display, lighting, ALIEN-X The latest C-arm version introduced to the market in January 2019 (our unit manufactured in 2022). The system is designed to have a working performance similar to an angiography unit or a stationary hemodynamics unit; therefore, it will not be affected by the high temperature of the X-ray unit or other components. The C-arm movement is both motorized and manual. Isocentric active anti-collision system geometry on the FPD and X-ray side. Compact and stable with a perfectly balanced C-arm, which is safe for all movements. Excellent maneuverability thanks to two large anti-static steering wheels. Latest generation start & stop system with excellent ergonomics and easily recognizable (color-coded) steering wheels. Durable cable connections between the C-arm and the trolley, resistant to mechanical damage, special paint for quick cleaning and disinfection. Generator power: 25kW Detector: 3030 X-ray tube: dual focus 0.3-0.5 mm Anode speed: standard and high speed available Control console: no. 2 synchronized ETS15-18 (on the C-arm and on the trolley) ETS15-18: real-time images and reference images displayed C-arm movements: manual – motorized – hybrid C-arm position storage: no. 4 arbitrary positions Pedpfxsz Dft Es Alwogt Anti-collision systems: active systems on both the FPD and X-ray tube side Adjustable monitor: 4K Small-sized trolley: separate from the C-arm Foot pedal New EPB power supply systems X-ray tube Alien X uses the latest generation of X-ray tubes with a titanium, zirconium, and molybdenum (TZM) plate. The advantages compared to using pure molybdenum plates are: better resistance to deformation, higher recrystallization temperature, and higher thermal resistance. Anode capacity 400 kHU 104 kHU/min anode dissipation High anode rotation speed Dual focus 0.3-0.5 mm 1200 W dissipation in the housing WAD + EHC WAD (Water Aided Dissipation): X-ray tube cooling system; through the combination of dielectric oil management within the radiology complex, coolant, and an advanced heat exchanger, there are no fans in the sterile field. EHC (Eurocolumbus Heat Control): real-time control of the heat generated with immediate actions to change frames/s and/or pulses and/or imaging and radiological parameters to ensure optimal system operation and avoid overheating. Manual with motorized drive – HYBRID The Alien X C-arm movement can be done both manually and with a motor; manual movement is easy, and the system can be operated simply and ergonomically thanks to dedicated handles. Hybrid movement allows the combined use of both movements. Motorized horizontal movement is also available as an option. This option is mandatory if the EIC package is required. EPD anti-collision system However, it should not be overlooked that a flat detector must have certain important features, regardless of the technology used, namely: 16-bit DQE ≥ 75% MTF ≥ up to 55%

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Pedpfxezal Raj Alwjgt Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, !!! We have two units in stock. Price is for one unit only !!! 🔄 Shaking & Drive System * Speed Range: 25 to 400 RPM (maximum 300 RPM when units are stacked). * Shaking Orbit: 3/4 inch (1.9 cm) circular orbit is the standard configuration (some documentation notes 1-inch or 1/2-inch options depending on the exact sub-model code). * Drive Mechanism: Triple-eccentric counterbalanced drive powered by a maintenance-free, brushless DC motor. 🌡️ Temperature Control * Temperature Range: 4°C (or 20°C below ambient temperature) up to 75°C (for 50 Hz units) or 80°C (for 60 Hz units). * Control Accuracy: Ambient temperature can be set in 0.1°C increments with a control accuracy of ±0.1°C. * Refrigeration: Hermetically-sealed 1/5 HP compressor using CFC-free R134A refrigerant. 📐 Capacity & Dimensions Pgodpfx Asz Dhl Rjlwst * Overall Dimensions: 24.4" W × 28.7" D × 36.4" H (62 cm × 73 cm × 92.5 cm). * Internal Chamber: 20.5" W × 20.5" D × 24.8" H (52 cm × 52 cm × 63 cm). * Platform Size: 18" × 18" (46 cm × 46 cm) standard universal or dedicated platforms. * Flask Capacity: Accommodates glassware ranging from 10 mL up to 6-liter Erlenmeyer flasks. * Static Incubation: Includes 2 height-adjustable stationary shelves for incubating Petri dishes or test tube racks without shaking. * Net Weight: Approximately 300 to 360 lbs (136 to 163 kg) depending on options. ⚡ Electrical & Utility Features * Power Requirements: 240V versions (50 Hz), up to 1500–1800 VA maximum power consumption. * Timer: Continuous or programmable from 0.1 to 99.9 hours. * In-Chamber Outlet: Internal, moisture-resistant electrical outlet to power secondary equipment inside the chamber. * Safety Features: Automatic shaker shut-off when the door is opened, independent over-temperature thermostat, and audible/visual alarms for speed and temperature deviations. Good working condition. Please check out our other listings as well.

Condition: used, color: black, loading space volume: 10 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 750 mm, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, lashing eyes Body: Roll-off container with a drivable tilting flap, approx. 10 m³, roll-off container approx. 10 m³ according to DIN 30722-1, with tilting flap, spring relief (bottom plate of the tilting flap made of 4 mm checkered plate) Internal dimensions: 6,000 mm x 2,300 mm x 750 mm Sheet thickness 5/3, 1 side rail per side, floor/wall 45 degrees, external stringers: floor/wall reinforced 90 degrees, stringer spacing 750 mm, end profile tube 89.9 mm, 6 lashing eyes on the wall (3 per side) RAL 9005 Deep Black ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Podpfxsz Aurdj Alwogt

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line Pjdpfx Alszp Rmqswogt - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: used, functionality: fully functional, This is a handwashing and slop sink from the renowned manufacturer Blanco, in a robust design, not comparable to cheap manufacturers with inferior quality. You will receive an invoice with VAT shown. Our service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded appliances at fair prices Professional and competent advice – before and after purchase Free shipping within Germany (excluding islands/mountain stations) Provision of operating instructions, connection diagrams & spare parts Trade-in of your combination steam oven from model year 2004 onwards Complete range of accessories at attractive prices Condition: Used, fully functional Product description: W x D x H: 700 x 500 x 850/560 mm Sink size: Length: 340 mm Width: 240 mm Height: 150 mm Length: 370 mm Width: 340 mm Height: 150 mm Design: The handwashing and slop sink are arranged one above the other for space-saving reasons. Consisting of a compact, self-supporting construction, standing on four longitudinally seam-welded square tube feet (40x40x1.25 mm each). The ends of the uprights are equipped with height-adjustable plastic screws (+/- 15 mm) to compensate for uneven floors. Both sinks are fitted with three-sided stainless steel panels, with the cover of the handwashing sink arranged at an angle. The sinks are deep-drawn in a single process and seamlessly welded into the cover. The covers are bent over 50 mm on three sides. The handwashing sink is bent up 50 mm at the back with an outward flange. The slop sink is fitted with a raised profile edge (splash guard) all around. The handwashing and slop sink combination is equipped with plug-and-overflow valves 1 1/2″ and a support grid made of stable plastic (material: ASA). The water supply to both sinks is provided by a single-lever mixer tap 1/2″. Supply and drain lines as well as the tap are included separately and can be easily installed using the operating and installation instructions. Technical text HAU-P 5×7/ Version 3.0/ U. Herbstreith Technical data: Material: CNS 18/10 Material no.: 1.4301 Manufacturer: BLANCO GmbH + Co KG Type: HAU-P 5 x 7 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Pgedpfezz Ibpex Alwjt Do you have any questions, would you like advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (AGB).

Condition: new, Year of construction: 2024, Basic configuration Laser source: Raycus Laser head: Raytool Autofocus Servo: Yaskawa System: FSCUT 5000 A Loading: manual Structure: 3 horizontal chucks CAD CAM: TubesT, TubePro Smoke extractor: Topsin 7.5kW with 6 filters Tube diameter: 15-350mm Pgjdpfx Ajmx R S Nolwst tube length: 0-4000/0-6000mm Maschinengröße: 13500x3400x2400mm

Condition: like new (used), overall weight: 6,400 kg, maximum load weight: 650 kg, load capacity: 500 kg, Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. Suspension: Rigid type centrifuge on inertia plate. Lid: with 3 manual opening closures, lid opening by means of a hydraulic piston (includes hydraulic power unit), a flat sight glass, an inclined sight glass, cake scraper, N2 inlet fittings and with washing tube and loading tube connections Transmission: 37 kW ATEX electric motor Pgjdpfx Ajrrwdbelwjt Securities: pneumatic lid opening safety piston, lid safety piston detector. lid open detector. detector for tachometer on machine and motor (includes connection box)

Condition: used, functionality: fully functional, Year of construction: 2014, USED 150T HYDRAULIC PRESS BRAKE, SAHMATO AP1520-150. Pgjdozh Em Aopfx Alwet

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Psdpsz Akftsfx Alwegt Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Router motor power: 1.1 kW Voltage: 380 V

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely Pgsdezlbpbepfx Alwst height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Steel welded construction made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load, ramp storage * Between the longitudinal beams behind the axle assembly, below the loading area, two insertion pockets for one access ramp each * with locking plate in the head frame at the rear. Under-ride guard * according to EC Front kingpin * Kingpins with single-side operation * Rear support: Two adjustable drop-leg supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Disc brakes approx. 370 x 45 mm * Wheel connection: 8-hole, center-mounted for twin tires, ABS * Total stroke of the air suspension approx. 310 mm, of which lifting approx. 250 mm and lowering approx. 60 mm * Control via hand lever with detent function. Tires * 8-ply, 265/55R 19.5 - Manufacturer: Goodyear * on steel rim 8.25 x 19.5. * Splash guard: made of PVC in front of and behind the axles according to EC Pgodpfx Aljz Dmn Dewot Load securing * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached when the side walls are closed, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t. * Recess pockets for stake pockets 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Compressed air braking system according to EC with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow. * Spring brake on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame. Headboard * Removable from 25 mm side wall Lighting system * Lighting system according to EC, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs. Paint finish * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of your choice * Side walls and side wall posts: RAL color of your choice * Under-ride guard: RAL 9010 pure white * Hubs: KTL black rims: RAL 9006 silver * Attachments: galvanized / KTL black * Contour marking: acc. to EC, yellow on the side and at the rear Incl. Accessories * Rear extension approx. 800 mm incl. under-ride guard * extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * with screwed towing eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of stake pockets made of galvanized tube, approx. 80/50/4 mm * approx. 1,000 mm long container locks for 1x20? container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps * Load capacity per pair approx. 9,000 kg * 4 x stainless steel tool boxes between or behind the axles, 6 x 25 mm * Side walls and rear wall made of extruded aluminum hollow profiles, approx. 600 mm high, foldable and removable * removable Kinnegrip stakes