Used Steinbock Roller Cover for sale (15,325)

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Hfedpfx Afoxrtdqetjl Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. Hfodpeyrtbqofx Aftol • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. • Optional: • 5 pcs. External turning tool holders SQ20, BMT 55 (500-0696) • 2 pcs. Facing tool holders R/L (500-0701) • 1 pc. Double external turning tool holder HS/GS (500-0868) • 2 pcs. Double external turning tool holders HS (500-0705) • 1 pc. Parting tool holder (500-0709) • 7 pcs. Boring bar holders; BMT 55 ID 32 (500-0698) • 2 pcs. Triple internal turning tool holder GS (500-0707) • 2 pcs. Cover IK (500-0711) • 1 pc. Reducing sleeve set Boring (n/a) • 2 pcs. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. Adapter set PRECI-FLEX ER25 (BMT 55P) (500-0523) • 2 angled externally cooled external heat sinks Eppinger • 2 straight externally cooled external heat sinks Eppinger Additional Information As new, showroom model Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. Hodpsy Hixvjfx Aftefl • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: used, mileage: 6,800 km, power: 140 kW (190.35 HP), color: gold, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electronic window regulator - left Hodpfx Afjy Uqy Dotsfl - Electronic window regulator - right - Driver airbag - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: B25 Electric parking brake, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, C74 Illuminated Mercedes-Benz entry trim, CA3 Active Steering Assist, CF8 Sports suspension, CK8 Steering wheel heating, CL1 Steering wheel adjustable in tilt and height, CL3 Leather steering wheel, CM2 Bumpers and trim parts painted in vehicle color, CU4 Aerodynamics package, D14 Anodized roof rails, D34 Panoramic sliding sunroof, E07 Hill-start assist, E1D Digital radio (DAB), E1E Navigation, E1T Touchpad, E4S Smartphone integration package, E65 Burmester surround sound system, E7H MBUX multimedia system High, EI0 Wireless charging system for mobile devices, ES2 12 V socket in the trunk / cargo area, ES3 12 V sockets for rear seat rows, right and left, ET4 Active Distance Assist DISTRONIC, F2W Winter package, F3T Decorative trim elements, wood-grain optic, olive gray, open-pore, F3Z Comfort closing, F48 Heating for windshield washer system, F65 Exterior mirrors, automatically folding, F66 Lockable glove compartment, F69 Ext. mirrors electr. adj. - and heated - with integr. blinker, F71 Interior mirror, automatically dimming, FG0 Center console with roller cover, FG9 Cup holders that can be attached to the rear armrests, FH6 Instrument panel in leather-look with decorative stitching, FP3 Mirror package, FS5 Illuminated mirrors for sun visors, G43 9G-TRONIC, H00 Warm air duct to the passenger compartment, H12 Auxiliary hot water heater, H15 Seat heating for passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH4 Automatic climate control system THERMOTRONIC, HY1 Remote control for auxiliary hot water heater, HZ0 Auxiliary heater, electric, HZ7 Air conditioning system, semi-automatic, TEMPMATIC in the rear, IN2 Wheelbase 3200 mm, long overhang, J55 Seat belt warning system for passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB6 Parking package with 360° camera, JF2 ENERGIZING Comfort, JH0 Widescreen Cockpit, JM2 Extended automatic restart on highways, JM3 Route-based speed adjustment, JM4 Active Speed Limit Assist, JP1 PRE-SAFE, JS3 Driving Assistance Package, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB5 Main tank 70 liters, L45 MULTIBEAM LED with High Beam Assist PLUS, LA2 Headlamp Assist, LC4 Comfort roof control unit, LC5 Ambient lighting in the exterior mirrors, LC6 Lighting in the grab handle, rear, with reading spot, LC7 Lighting for footwell, front, LC8 Ambient lighting, tailgate, LE1 Adaptive brake light, LE3 Ambient lighting 64 colors, cockpit + rear, LE6 Night lighting, rear, LG4 Rear, brake and indicator lights in LED technology, LP4 Projection of brand logo, MJ8 ECO Start-Stop function, MO5 EMISSION CLASS EURO 6e RDE5 M/N1 GR. II, MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800/min, MX0 BlueEFFICIENCY package, P28 EASY PACK package, electric sliding door/tailgate, P2Z AVANTGARDE Plus package, Q50 Trailer coupling, ball head, removable, Q... Metallic, sunroof, alloy wheels, electric immobilizer, ESP, navigation system, auxiliary heating, particulate filter, warranty, rain sensor, panoramic roof, electric side mirrors, sports suspension, Bluetooth, on-board computer, hands-free system, multif

Condition: new, functionality: fully functional, fuel type: electric, color: green, Optimal dirt collection thanks to the V-shaped main brush. Enhanced dust control is achieved through an innovative filtration system—capable of filtering particles down to 3 micrometers. Large debris hopper, easily emptied via a rotation technology. Intuitive, multilingual control panel with waterproof display. Automatic stop function: The AUTO stop feature allows the machine to be stopped and restarted easily via foot pedal, ensuring particularly safe and user-friendly operation. Maintenance-friendly design: The main brush and filtration system can be replaced without tools. The protective cover can be tilted easily to allow fast access to internal components during maintenance. Battery voltage: 48V/67Ah Hjdpfx Asyx Db Njftjfl Sweeping width: 1,250 mm Main roller brush width: 500 mm Cleaning capacity: 6,400 m² per hour Side brush drive: 90W (2 units) Drive motor: 800W Main roller brush motor: 700W Vacuum motor: 145W Water tank capacity: 10 l Debris container: 80 l Filter area: 5.2 m² Charging time: 3.5 to 4 hours Operating time per charge: >3.5 hours Dimensions: 1.5 x 1.25 x 1.25 meters

Condition: new, Year of construction: 2022, Working widths 4400 mm Roller width 4600 mm Hodpfx Afjtv Idfotsfl Number of rollers 2 Stück Supporting roller - dia 490 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 23 to Liquor trough with guide roll heb + senkbar Cloth guiding system Breithalter,1 Leitwalze Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/min =10 kW Hydraulic unit for combined pressure Ölteil aus ALU • Machine will be completely new, (Photo shows an new machine in delivery-status), • additional new frequency drive for adaptation into a plant is possible,

Condition: new, Year of construction: 2026, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data Hfjdpjiz Tczefx Aftsl MAXIMUM TURNING DIAMETER 400 mm MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys Factory new machine, under warranty For more information you can visit our web page.

Condition: excellent (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging Hedpozhtawjfx Aftefl -Type:280 2/1 -Item No.: 47926133 -Lid: Ø 350 mm -Quantity: 1 set available -Transport dimensions: 460/460/H120 mm -Weight: 5.8 kg

Condition: used, maximum load weight: 29,970 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2019, loading space length: 8,300 mm, loading space width: 2,310 mm, loading space height: 1,970 mm, loading space volume: 38 m³, Equipment: ABS, VEHICLE NUMBER: 2977 ----* Exterior features: * Steel chassis * Rear tailgate with sealing Hsdpfx Aozkc N Heftsfl * Additional tension locks for the tailgate * Work platform with access ladder * Roller cover * Loading pressure gauge * Foldable underrun protection * Aluminum rims * Tool box * Extension ladder with bracket * Bracket for broom and shovel * Outrigger * LED reversing lights * Warning sign ----* Technical specifications: * SAF axles with disc brakes * Lift axle on the 1st axle * Tires 385/65 22.5 * Tread depth in mm: 1st axle: 8/12, 2nd axle: 15/9, 3rd axle: 8/10 * Automatic lowering during tipping process * Tipping cylinder HYVA 250 bar * Fifth wheel height 1,150 mm - 1,250 mm * Loading height 3,600 mm * Unladen weight 5,530 kg * TÜV/MOT: 09/26 * Example lease-purchase: €389 per month, term 48 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery to your location is possible. We offer trade-in, leasing, and financing options. We make it possible!

Condition: used, Year of construction: 2025, Working widths 5400 mm Roller width 5600 mm Number of rollers 2 Stück Supporting roller - dia 490 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 35 N / mm Pressure total 19 to Cloth guiding system Breithalter,1 Leitwalze Liquor trough with guide roll heb + senkbar Hedpfju Rt R Njx Aftofl Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/min =10 kW Hydraulic unit for combined pressure aus Edelstahl • 2-roller padder with supporting roll and swimming roll, Küsters system, • additional new frequency drive for fitting the machine into a system is possible. • Photos show similar machines in delivery condition • Warranty: 12 months • This machine is completely manufactured after receipt of order.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 Hsdpfsztpb Ijx Aftefl – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Year of construction: 2017, condition: excellent (used), functionality: fully functional, MACHINE FOR THE PRODUCTION OF ROLL BAGS, AMUTEC TSA ROLLER 1380 Minimum/maximum material width: 300/1360 mm Hfjdpfx Aozzd S Rsftjl Minimum bag length: 50 mm Minimum/maximum thickness: 2×10 / 4×75 μm Minimum/maximum width of finished rolls: 100/420 mm Maximum diameter of finished rolls: 120 mm Folding triangles Conveyor belt Photocell for printed materials Control panel with touchscreen Labeling machine Year: 2017

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Hsdsvtwzmspfx Aftefl Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Hjdpfxew I Uzke Aftjfl Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Year of construction: 2002, condition: used, Working widths 1800 mm roll surface width 2000 mm Number of rollers 2 St./ea Upper roll Gravur oder Stahl dia diameter of upper rolls 210 mm Heating - upper roll Elektro Lower roll Gummiert dia diameter of lower rolls 300 mm Roller covering - soft rubber 95 °Sh weight 2 t dimensions of the machine ca. 3,0 x 1,5 x 1,8 m Embossing Calender with exchangeable top roll, The following spare rollers are included with the machine: • 1 x steel roll, chrome plated • 3 x engraving rolls, various designs • 1 x spare bottom roll - rubber coated On the outlet side there is a small batch - rising batch winder ATTENION: the electrical control unit is defective, still needs to be replaced, therefore SPECIAL PRICE for self-repair Hodpfx Aet An E Roftjfl

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails Hfodoyuuzdjpfx Aftjl • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum element height: 100 mm Hfjdoz Agvhspfx Aftsl Manual adjustment of roller spacing Simultaneous application of adhesive to the top and bottom surfaces

Condition: used, mileage: 8,11,366 km, power: 383 kW (520.73 HP), first registration: 10/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, soot filter, Vehicle No. for customer inquiries: 244 ----Vehicle with engine damage!!! * Oil pan removed, vehicle without OIL!!! * Intercooler full of water!!! * Vehicle with cylinder liner damage!!!! ----Special equipment: * Aero kit * Battery 225 Ah * Curb mirror, right, electrically adjustable and heated * EURO 6 engine * Cab: with air suspension * Cab: XXL * Suspension: Air ECAS * Cruise control with distance control * Roof deflector * Heated air dryer * Wheelbase 3600 mm * Headlight cleaning system * Exterior sun visor * Door extension for cab * Front axle VOK-08, angled * Xenon headlights * Additional high/low beam and fog lights with cornering light Hfodpfx Aezz Ubpoftel ----Standard equipment: * Axle configuration: 4x2 * Ambient lighting * Front/approach mirrors * Trailer socket 24V / 7-pin * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Audio system: MAN Media Truck Advanced 12V radio with navigation system preparation * Exterior mirrors, electrically adjustable and heated, wide-angle mirror, heated * Onboard computer MAN-Tronic * Electronic Stability Program (ESP) * Electronic braking system MAN-Brakematic * Cab: with Nordic insulation * Driver's seat, comfort, air-sprung * Suspension: Air / Air (full air) * Power windows * Remote central locking * Tinted windshield * Generator 28 V 80 A * Transmission 16-speed - Type: ZF 16 S * Body/superstructure: semi-trailer tractor * Rocker arm - brake EVB * Automatic climate control * Fuel filter, heated * Fuel tank: combination tank - 400 liters diesel + 60 liters AdBlue * Steering wheel with multi-function buttons * Raised air intake * Air compressor 1-cylinder, 360 ccm * Engine compartment encapsulation * Side-mounted spare wheel jack * Fifth wheel coupling: Jost JSK 37 C * Disc brake, rear axle * Disc brake, front axle * Tinted rear side windows * Seat cover / upholstery: comfort quality * Sun protection roller blind, side window, driver's door * Spray mist reduction * Stabilizer on one rear axle * Storage box accessible from the outside * TGX * Tinted door windows * Underrun protection, front * Viscous fan * Central locking * Permissible total weight 18.00 t ----German vehicle! * 9,850 EUR net plus VAT * A deposit will be retained for export to third countries or EU countries. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/pictures provided are non-binding and do not constitute guaranteed characteristics. * We do not assume liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase. * Subject to price changes, typos, errors and prior sale. * Dear customer, please understand that due to the age and mileage, we prefer to sell the vehicle to businesses or dealers. Thank you very much. * We speak: * Greek / Miláme Elliniká

Condition: used, Year of construction: 2006, Working widths 2200 mm Roller width 2400 mm Number of rollers 2 Stück Supporting roller - dia 270 mm Hodotv Iamepfx Aftsfl Roller covering - soft rubber 75 Grad shore Swimming roll - dia 210 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 12 to Cloth guiding system 2 Profilbreithalter,1LW Liquor trough with guide roll und Doppelwandheizung Drive side nach Auftrag Operting side nach Auftrag Hydraulic unit for combined pressure aus Edelstahl Liquor trough with displacer +1 Leitwalze Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm • Machine will be completely overhauled before delivery, we supply with warranty, • Cloth guiding for knitted fabrics - 2 driven profile expander, (Photo shows an overhauled machine in delivery-status), • additional new frequency drive for adaptation into a plant is possible,

Condition: good (used), Year of construction: 1967, Kupfermuller Lignum double-sided thicknesser Hfjdpfxstzcmte Aftsl Kupfermuller Lignum double-sided thicknesser. Stable construction. The machine has a planing width of 630 mm and 4-knife shafts. The machine has a processing accuracy of 0.1 mm. The planing height is 180 mm. The machine has steel rollers mounted in a table with its own drive, that is, active split rollers. The machine is therefore ideal for planing wet and dry wood for gluing. Net price. VAT invoice, machine with electrical cable covers and stop buttons on both sides, ready to go. Stable cast iron construction. Weight of about 3 tons. The machine does not require any financial outlay.

Condition: new, Year of construction: 2026, CORMAK TH410S Thickness Planer with Spiral Cutter Head The CORMAK TH410S thickness planer with a spiral cutter head is an advanced woodworking machine designed for professional users who require maximum precision, durability, and operating comfort. The spiral cutter head equipped with 72 replaceable carbide inserts provides exceptional surface quality, significantly quieter operation, and lower consumable wear compared to traditional straight knife cutter heads. Main advantages of the CORMAK TH410S thickness planer with spiral cutter head Spiral cutter head with 72 inserts – ensures smooth cutting, reduces vibration and noise by up to 50%, and provides significantly longer service life compared to conventional straight knives. Replaceable carbide inserts – individual segments can be rotated or replaced when worn or damaged, reducing operating costs. Ground cast iron table – provides optimal material sliding and stable workpiece guidance. Three feed speeds – allows adjustment of the processing speed according to the type of wood and production requirements. Digital height indicator – enables precise thickness adjustment with accuracy up to 0.1 mm thanks to the indicator mounted on the handwheel. Chain drive system – ensures smooth and precise material feeding through the machining zone. Advanced safety features – compliance with occupational health and safety requirements and technical documentation standards ensures safe operation. Design and technology The CORMAK TH410S thickness planer is based on a robust steel and cast iron construction, providing high rigidity and resistance to vibration. The 95 mm diameter spiral cutter head is equipped with 72 carbide inserts arranged in a spiral pattern, ensuring continuous cutting and eliminating the risk of tearing wood fibres, even when processing hard and resinous wood species. The extraction and sound-insulating cover provides quick access to the cutter head and simplifies maintenance operations. Precision and working efficiency Hodpfox Dlp Ajx Aftsfl With a planing range from 5 to 230 mm and a working width of 410 mm, the machine enables processing of both thin boards and thick structural elements. The cutter head speed of 4050 rpm and powerful 3.0 kW (S1) motor ensure high performance even during intensive operation. The use of a spiral cutter head allows achieving a high-quality surface finish without the need for additional sanding, significantly reducing preparation time before further processing. Standard equipment Spiral cutter head with 72 carbide inserts Digital thickness adjustment indicator Feed drive with chain transmission Extended table with support rollers Sound-insulated dust extraction cover Complete safety guards compliant with technical documentation and workplace safety standards Technical specifications Parameter Value Thickness planing width 410 mm Thickness adjustment range 5–230 mm Planer shaft diameter 95 mm Number of knives (spiral inserts) 72 pcs Planer shaft speed 4050 rpm Feed speed 6 m/min Dust extraction connection Ø100 mm Motor power 4.2 kW Motor power S1 100% duty 3.0 kW Voltage 400 V Extraction outlet diameter 100 mm Gross weight 263 kg Dimensions Parameter Value Width 1110 mm Depth 710 mm Height 1020 mm Table size – width 930 mm Table size – depth 410 mm

Condition: used, Year of construction: 2000, Working width 2800 mm Roller width 3000 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 240 mm Roller covering - ebonit 75 Grad shore Pressure line 45 N / mm Pressure total 13,5 to Cloth guiding system for woven fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Operting side links Drive side rechts Drive shaft dia 80 mm Hydraulic unit for separately pressure Links-Mitte-Rechts total power requirement 12 kW weight 4000 kg Hodpfx Afstv H U Nstofl range L-W-H 3,6 x 2,2 x 2,8 mm • new control system from Küsters - delivered in 2008, • with quick cleaning, • without being overhauled,

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers. Hfjdpfx Afeziwnbstel

Condition: good (used), Gravity Flexi Roller Conveyors in Stock 3 Conveyors available Hedpfoyr Nuajx Aftefl Dimensions Conveyor 1, 3240mm closed x 560mm wide double plastic rollers, height 680mm fully adjustable Conveyor 2, 750mm closed - 2160mm fully open x 500mm wide steel rollers, height 8000mm fully adjustable Conveyor 3, 1350mm closed - 4500mm fully open x 500mm wide plastic rollers, height 770mm fully adjustable

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 3 kg, first registration: 02/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP ROLL-OFF CONTAINER FOR BULKY WASTE WITH REAR OPENING, DOUBLE SWING DOORS, 200 MM BEAMS, NEW ROLLERS AND REAR CROSS MEMBER REF: 26-U-32 TYPE: bulky waste NEW: no COVER: no OPENING: rear, double swing doors Hfedpfxex Ixp Ts Aftjl DIMENSIONS OVERALL EXTERNAL LENGTH: 6.40 m + 0.20 m EXTERNAL BOX WIDTH: 2.50 m FRONT SIDE INTERNAL / EXTERNAL HEIGHT: 2.20 m / 2.40 m REAR SIDE INTERNAL / EXTERNAL HEIGHT: 2.20 m / 2.40 m SIDE INTERNAL / EXTERNAL HEIGHT: 2.20 m / 2.40 m CAPACITY: 33 m³ WEIGHT: 2,760 KG FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOUR: green Subject to errors and/or omissions. Prices shown do not include VAT. Please contact our sales department for up-to-date pricing and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specialising mainly in the waste sector. Specialists in trucks, trailers, and roll-off equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 containers, including roll-off containers with or without cranes. E.&O.E. Due to the quantity of listings and details, Aurora invites you to confirm the accuracy of the described data with our sales staff.