Used Trennjaeger Vct 400 for sale (17,108)

Condition: ready for operation (used), Vibratory feeder, bowl feeder, vibratory part feeder, Used machine Manufacturer: RNA Model: SRHL 400-1 L Overall dimensions: 730 x 730 x 540 mm Dksdpou Hkr Nsfx Akgon Weight: 155 kg Electrical data: 230V; 5.7A Bowl size: 310 - 640 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 4256.169.256, Clipsator Technopack TIPPERTE • Type: KDC VT 400 • Clipping capacity: up to 120 cycles/minute • Clipping diameter: 30 to 120 mm • Integrated pneumatic system, pressure: 6 to 8 bar • Air consumption: approximately 0.4 m³/min • Stainless steel construction: ideal for strict hygiene standards Dksdpeyiph Uofx Akgsn

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. welding power: 400 A -Wire feed: 4-roller drive -Version: Water-cooled Dodjwl Dptspfx Akgjkn -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m -Quantity: 1 piece available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Condition: good (used), Year of construction: 2016, Apollo spiral conveyor, infeed at approx. 6.42m / outfeed at approx. 1.09m, approx. 40cm wide conveying path – used –: Price ex location (net): only €5,950 – dismantled, packed and loaded! Manufacturer: Apollo Model: SPC 1500-400-A4-6T Year of manufacture: 2016 Belt width: approx. 40cm Infeed height (top): approx. 6.42m Outfeed height (bottom): approx. 1.09m Spiral diameter: approx. 2m Kettenlänge (chain length): 37.5m Serial no.: 562044-100 Dodjyhxp Aepfx Akgekn 230/400V / 50 Hz, 2.2 kW Speed (min): 40m/min IP54 Load capacity: 6.4kg/m Condition: good – very good Availability: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Tetra Laval spiral freezer, type: SVR 400/13.75-100-159, 380 V, 3 Ph, 50 Hz, 17 floors, s/s mesh belt, belt width: 460 mm, infeed height: 1030 mm, outfeed height: 2700 mm, total dimensions: 5850 mm x 2650 mm x 3350 mm. Including evaporator, cooling compressors and Goedhardt roof condenser, type: KOAL-76L/3-6P, number: 97-3958-010, year of construction 1997, 3 fans, dimensions: 1200 mm x 5500 mm x 1900 mm. Dkodpjy Tl S Sofx Akgon

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 1,210 mm, total width: 430 mm, total length: 1,200 mm, overall weight: 133 kg, type of cooling: water, electrical fuse: 32 A, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 360 A, protection type (IP code): IP23, welding current (min.): 20 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: documentation/manual, Are you looking for a high-end MIG/MAG pulsed system for demanding industrial applications? The Merkle HighPULSE touch 400 DW combines state-of-the-art inverter and pulse-arc technology with intuitive touch operation, high power reserves, and a water-cooled system – ideal for steel, stainless steel, and aluminum in series and quality production. ✓ Pulse-Arc technology up to 400 A Controlled droplet transfer, less spatter, and reproducible seams – even with demanding materials. ✓ Intuitive touch operation: Fast parameter setting, saved jobs, and clear process guidance for efficient workflows. ✓ DW design with water cooling. High duty cycle and process stability under continuous load – ideal for industrial welding tasks. Areas of application: ✓ Series production in mechanical and plant engineering ✓ Aluminum, stainless steel, and steel structures ✓ Automated and manual welding workstations Scope of delivery: HighPULSE touch 400 DW power source, integrated double wire feeder, water cooling unit, water-cooled MIG/MAG torch, ground cable with clamp, 3×400 V power cable, operating instructions, etc. Special accessories: DeepArc ColdMIG HighUP Interpulse Djdpfjy U D E Tox Akgjkn Automated Connector, 6-pin

Condition: used, mileage: 74,000 km, power: 92 kW (125.09 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,600 mm, loading space length: 3,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Now chat via WhatsApp: Contact our sales advisor quickly and easily. Attention !!! Preferential sale to business customers only. Internal ID number: [3269] Dodpfx Aoy Ain Nokgekn ----Optional bookable: * 12–64 months warranty (valid throughout the EU) * New inspection * New MOT & emission test * Nationwide delivery * Financing available even without a down payment * Tow bar / reversing camera retrofit available on request! * Spring Offer: On request and for an additional price of only €999, increase the towing capacity to up to 3,500 kg (vehicle- and manufacturer-dependent). ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Immediately operational * Euro 5 emissions standard * High roof + long wheelbase * Tow bar: 2,500 kg * Air conditioning * Reversing camera * On-board computer Special equipment: Rear wing doors without glazing (opening angle 270 degrees), sliding door in cargo/passenger compartment right side with glazing. Additional features: Storage compartment with footwell lighting, overhead storage shelf, driver airbag, audio controls on the steering wheel, audio system: radio with CD player and Bluetooth, electrically adjustable and heated exterior mirrors, on-board computer, integrated sunglasses holder in headliner, COMFORT design and trim line, tachometer, rear parking sensors, electronic brake force distribution (EBD), driver assistance system: hill-start assist, rear window package, body type: high-roof box van, fuel tank: 105 liters, height-adjustable steering column, engine 2.3 liters – 92 kW dCi diesel, rear fog lamp, wheelbase 3,682 mm, full-size spare wheel, low emission as per Euro 5 standard, gear shift indicator, front mud flaps, front side airbag, cabin seating: double passenger seat, 12V socket in cargo/passenger area, partial glazing, heat-insulating glazing with UV protection. ----Interested in leasing or financing? We offer attractive terms – also with no down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information online is non-binding and intended only as a general description of the vehicle. Errors, typos, and prior sale reserved. The binding condition of the vehicle is defined solely by the purchase contract executed on-site or confirmed in writing. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to business customers.

Condition: used, Year of construction: 2018, operating hours: 1,000 h, * Kinshofer KM 622 - 400 * Rotator with grapple * Factory No.: DG01552 * Year of manufacture: 2018 * Load capacity: 400 liters * Self-weight: 340 kg * All information without guarantee. Dkodpfx Akjzbwzasgsn

Condition: as good as new (ex-display), functionality: fully functional, FRONIUS TPS 4000 ROBOT SET .) Fronius power source (Tps4000) .) Fronius cooling unit (Fk 4000) .) Fronius wire feeder .) Fronius intermediate hose package Dkjdpfx Aswbi E Sekgon .) Fronius trolley .) Fronius hose package .) Fronius RCU 5000i .) Interface = INTERBUS RUGGED LINE (Optionally available: Profibus + €800 or Devicenet + €1400, others upon request) Manufacturer's list price: approx. €14,000 net We have €5,990 net - VAT deductible - invoice from the dealer. We always have several devices in stock in a wide variety of configurations. We are happy to receive your inquiries. The prices listed start at €... Prices/offers are customized based on the device configuration. Sample images of the devices. In stock in Vienna, 1230. Pallet shipping available for an additional charge: Austria approx. €180 Germany approx. €210 Europe upon request

Condition: like new (used), Year of construction: 2017, operating hours: 515 h, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 650 mm, turning diameter: 350 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,500 rpm, total height: 1,740 mm, total length: 2,610 mm, total width: 2,260 mm, torque: 240 Nm, overall weight: 3,400 kg, This machine is still in operation in a training workshop and is in like-new condition. Spindle hours: 564 Extensive accessories: Clamping devices, jaws, driven and fixed tool holders, as shown in the images in the advertisement. CNC universal lathe NEF 400 V3 3D control Siemens SL Operate CELOS Internal clamping device 3-jaw chuck BBD210-66 Set of soft top jaws, 3 pieces Coolant spray gun Main spindle reduction sleeve Design variant "BLACK" Hydraulic unit Foot switch for tailstock operation Technology cycle, alternating speed Dkjdpfezb Rwhjx Akgjn Documentation in German NETSERVICE (CELOS) SERVICE AGENT (CELOS) MESSENGER (CELOS) Programming/training software Sinutrain oper. for 6 participants DMG MORI training box for turning CNC control: 👉 Siemens SINUMERIK 840D sl 👉 Siemens SINUMERIK 840D sl User interface: 👉 CELOS (DMG MORI) Programming: 👉 ShopTurn (dialog programming) Under "Documents" you will find technical data in PDF format, a brochure for the control system, and other PDFs about transport.

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m Dkedpfjgf H Saox Akgon

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine KALTENBACH Type : MSK 400 Year 1976 with roller table. Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Dkjdpfx Aeqxamgekgen Machine in good condition, operating instructions available.

Condition: used, Year of construction: 1980, Circular saw with miter cut Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Saw blade: 400mm Dkjdpfx Asixumvokgsn

Condition: used, Year of construction: 2023, machine/vehicle number: SN057967, Demonstration machine, 12 months warranty (excluding engine) Dodpfx Aey H Hryekgjkn

Condition: excellent (used), Year of construction: 2016, pressure 400 t chamfer lenght 6100 mm distance between columns 5050 mm stroke 600 mm distance between table / ram 870 mm throat 600 mm Dsdpfx Aou N Iy Nskgjkn table width 300 mm closing speed 100 mm/sec working feed 11 mm/sec return speed 120 mm/sec total power requirement 37 kW weight of the machine ca. 65 t dimensions of the machine ca. 8520 x 8550 x 5325 mm

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Dksdpfx Asyxq A Hskgsn Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: Dodpfxsy Rr Rcs Akgjkn - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2004, CATALOG NUMBER 7880 Technical data: - max cutting height: 150mm - max element width: 500mm - working width of shaft with saws: 400mm - shaft diameter: 70mm - max saw blade diameter: 450mm - from above: - anti-kickback devices - 2 toothed feed rollers – pneumatically pressed - from below: - slip roller - anti-kickback devices - 2 toothed feed rollers - saw shaft - 2 toothed feed rollers - stepless feed speed adjustment via inverter - feed motor: 3kW - main motor: 55kW - overall dimensions L/W/H: 2120x1600x1630mm - weight approx. 2750kg ADVANTAGES – Polish-made – robust construction – Used machine, in very good condition Net price: 55,900 PLN Dkodpfx Aksy Rrpxegen Net price: 13,310 EUR at 4.20 EUR exchange rate (Prices may vary with greater exchange rate fluctuations)

Condition: good (used), Year of construction: 2007, GILDEMEISTER NEF 400 CNC lathe Dsdjzb A Swopfx Akgjkn Year of manufacture: 2007 Control system: SIEMENS 840D powerline Equipment: hydraulic 3-jaw chuck SCHUNK ROTA NCK 250 mm 8-position turret hydraulic tailstock chip conveyor foot switch Included in the scope of supply: complete set of VDI tool holders, equipped with turning tools and more operating manual/documentation Technical data, transport & plans – see PDF. All technical specifications, illustrations and content are non-binding and without guarantee. Subject to change and errors. All other accessories visible in the pictures and video are not included in the scope of supply and are therefore not part of this sale. The scope of supply only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free on Truck) D-32457 Porta Westfalica packaging only Delivery time: immediately Subject to prior sale / Payment due immediately upon completion of purchase.

Condition: used, Year of construction: 1989, functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 700 mm, turning diameter: 600 mm, spindle bore: 130 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 22 rpm, rotational speed (min.): 10 rpm, rotational speed (max.): 1,600 rpm, OEHRINGER VDF 400 C-F CNC lathe with C-axis and driven tools Heavy-duty CNC lathe for complete machining of turning, milling, and drilling operations. The machine features a C-axis, driven tools, and a 12-position turret, making it ideal for machining large and heavy workpieces. Technical data: * Manufacturer: BOEHRINGER * Type: VDF 400 C-F * Year of manufacture: 1989 * Control system: Philips B3T * Swing over carriage: 750 mm * Swing over cross slide: 700 mm * Z-axis travel: 1,000 mm * Spindle bore: 130 mm * Max. spindle speed: 3,550 rpm * Drive power: 60 kW * Spindle head: Size 15 DIN 55026 * Chuck: FORKARDT 3 NHF 500, Ø 500 mm Dodpfx Ajzb A S Dokgekn Tool turret: * VDI 60 tool interface * 12 tool positions * 6 driven tool stations Equipment: * C-axis with separate servo motor * Driven tools * Milling and drilling operations possible * Coolant system * Integrated chip conveyor * Full hydraulic cylinder * Various tool holders Machine weight: approx. 17.5 t Machine from ongoing production. Inspection possible by appointment. More pictures and information available upon request.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 400 II was manufactured in 2014. It features an X-axis travel of 762 mm, Y-axis travel of 435 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 920 mm x 435 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 400 II vertical machining centre we have for sale. Contact us for further details. • Capacity and travels: • Spindle nose to table: 150–660 mm • Worktable: • Size: 920 x 435 mm (36.2" x 17.1") • Spindle: • Max torque: 117 N·m (86.3 ft-lbs) • Taper: BIG-PLUS Dual Contact #40 (BT40 / CAT40) • Cooling: Through-spindle coolant (included) • Automatic Tool Changer (ATC): • Capacity: 30 tools (cam-type double arm) • Tool-to-tool time: 1.3 s • Max tool length: 300 mm • Feed rates and motion: • Rapid traverse (X/Y): 36 m/min (1,417 IPM) • Rapid traverse (Z): 30 m/min (1,181 IPM) • Max cutting feedrate: 10,000 mm/min Additional equipment • Workpiece clamps, tools, and toolholders available at additional cost (not included) Technical Specification Taper Size BT 40 Dkodoy T I Snopfx Akgon

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for manual also robot editing to polishing of parts made of aluminium, steel, brass and zinc die-cast. Technical data: Polishing Pad: Max Ø 450 mm Spindle diameter: 35 mm Polishing wheel width: max 50 mm Dsdec Rfg Uspfx Akgjkn Suction connection: Ø 100 mm Dimensions (Lxwxh): 1800 x 1300 x 1800 mm Weight: 180 kg Supply voltage 3 x 400 V Power: 4 kW Height up to the polished shaft on request Made in Germany Warranty: 12 months Optional: Extension with a frequency inverter will cost €950 per polishing machine. 1 piece FU, 1 potentiometer for regulating; 1 main switch

Condition: good (used), The SMT 400 2.4C is a top-class ceramic furnace for continuous operation, designed for a wide range of heat treatment processes. This high-tech device is a vertical convection convection oven that can be used for sintering, annealing, tempering, curing, heat sterilizing, aging and drying a wide variety of items. SMT 400 2.4C operates at temperatures from 350 °F (177 °C) to 2000 °F (1093 °C) and has a capacity of 16 cubic feet (454 l). The oven reaches extreme temperatures quickly and is characterized by exceptional stability Dkjdpfx Akoq I Sgyjgsn

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Dkodpsy Dta Sjfx Akgen

Condition: ready for operation (used), Year of construction: 2017, cutting speed: 43,000 mm/min, Circular Metal Saw manufactured in 2017. This KALTENBACH KKS 400 features a saw blade diameter of 400 mm and a cutting speed range of 7 - 43 m/min. It includes a hydraulic horizontal vice for secure clamping and a micro-dose spray lubrication system. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 machine we have for sale. Contact us for further details. Dksdpfx Akoy Tvbdjgon - Saw Blade Diameter: 400 mm- Saw Blade Specifications: Performance saw blade, 400 x 3.0 mm, 160 teeth (suitable for Jansen profiles)- Cutting Speed: 7 - 43 m/min- Operation Voltage: 3x 400 V, 50 Hz (3 Phases, Neutral, Earth)- Control Voltage: DC 24 V- Valve Voltage: DC 24 V- Total Nominal Current: 14 A- Mains Supply Fuse: 16 A- Machine Color: RAL 7024 / 5018- Horizontal Clamping: Hydraulic horizontal vice, positioned on both the right and left sides of the saw blade (2 pieces)- Lubrication System: Micro-dose spray lubrication system (requires compressed air supply) in addition to the standard coolant water system- Mitre Angle Adjustment: Motorized adjustment of the mitre cutting angle, manually controlled via interface- Controls: Integrated electronic control panel with digital display screen and push-button input unit mounted on an external swivel arm