Center draaibank ZMM Sliven - CU 400

ZMM Sliven CU 400

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. Tsdpev Rpn Tefx Amkea We cordially invite you to cooperate!

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Tedpfx Aovr Hgvjmkja Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C Tedpfxjyltr Ae Amksa air conditioning 16,850 kg 91 kW Top condition

Condition: excellent (used), Year of construction: 1986, RAFAMET type KCF 400 Morę information on request Tjdpfxoytq T Hj Amkja

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 100 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 400 mm, turning length: 2,000 mm, quill travel distance: 230 mm, total length: 3,600 mm, total width: 1,250 mm, total height: 1,400 mm, spindle speed (max.): 1,400 rpm, metric thread steps: 120, overall weight: 3,100 kg, three-jaw chuck diameter: 315 mm, Used traditional parallel lathe Sibimex CU500MT in excellent condition, ideal for mechanical workshops, industrial maintenance, metal fabrication, and precision machining. Solid, reliable machine, always carefully maintained. Sturdy cast iron frame, smooth slides, and precise mechanics. Perfect for those looking for a ready-to-use solution without investing in a new machine. Tedpfx Amsym Ut Djkja Key features: * Excellent overall condition * Precise and reliable mechanics * Ready for immediate use * Ideal for machining shafts, flanges, bushings, and single parts * Perfect for small to medium production or maintenance Machine is operational and can be inspected by appointment. No urgent work required. Testing on site available.

Condition: used, functionality: fully functional, power: 231 kW (314.07 HP), Year of construction: 2004, machine/vehicle number: KMTODO61E02076058, fully functional Tjdpfsylyp Uex Amkja

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Tsdpfxexxxbzj Amkja Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Todpfoxtbf Eex Amksa Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1998, operating hours: 1,227 h, overall weight: 4,800 kg, fuel type: diesel, tank capacity: 1,000 l, color: grey, power: 280 kW (380.69 HP), output current: 504 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 280 kW (380.69 HP), nominal power (apparent): 350 kVA, total length: 4,500 mm, total width: 1,600 mm, total height: 2,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Iveco, type of cooling: water, We have a used emergency power generator/grid replacement system for sale with the following technical specifications: Condition: Used, fully functional, inspected Engine: MTU 12V396 (used in ships, locomotives, tanks, and industrial generators) Rated power: 1250 kVA / 1,000 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V Operating hours: approx. 287 hours (emergency power operation) - Includes batteries - Includes diesel tank - Includes circuit breaker - Includes new control system (island operation) - Includes engine cooler - Upon request and for an additional charge, the control system can also be synchronized for grid-parallel operation with load distribution and emergency power operation. Seamless integration into your energy infrastructure. Dimensions: 500x180x200 cm (L x W x H) Weight: 8,500 kg The emergency power generator will be delivered in an operational condition, including a documented load test lasting 60 minutes. Upon request, the generator can also be installed in a soundproof 30-foot container as a compact all-in-one unit. Delivery, installation, and commissioning are possible for an additional charge. Prices (net): - €58,000 per unit (without container) - €69,000 per unit (including container installation) Tjdpfxot Agwxo Amkea Further offers can be found at:

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN In addition to the machine tools are available Tedpfx Asd Egc Aomkja Switch Cabinet left X1- + R-/ X2- + R-Axe on round guide Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm