Used Vei Rkz 180/1320° for sale (6,776)

Condition: good (used), Year of construction: 1990, Control system: Siemens 840-C Knodpfxjzadags Afnsc Faceplate diameter: 1800 mm Swinging diameter: 2000 mm Maximum turning height: 1100 mm (below tool) Table speed: 130 RPM Workpiece weight: 8000 kg Tool changer: 12 positions

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Knodpfx Aszp Nv Defnec Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: excellent (used), functionality: fully functional, mileage: 1,74,000 km, power: 180 kW (244.73 HP), fuel type: diesel, tire condition: 50 %, axle configuration: 4x4, fuel: diesel, color: white, gearing type: automatic, Year of construction: 2014, Equipment: ABS, Android Auto, Apple CarPlay, air conditioning, airbag, car registration, cruise control, electronic stability program (ESP), navigation system, non-smoking vehicle, power assisted steering, Volkswagen Transporter T5 Edition 2.0 BiTDI 180 hp DSG 4Motion – 2014 I am selling my 2014 Volkswagen Transporter T5 Edition, with automatic DSG transmission and 4Motion all-wheel drive. Features: Knjdpfxezqgv Dj Afnjc Year: 2014 Mileage: 174,000 km Reconditioned engine installed at 168,000 km (approximately 5,000 km ago) Automatic DSG transmission 4Motion all-wheel drive Edition trim level Recent work carried out: Reconditioned engine New crankshaft New connecting rods New cylinder head New valves and tappets Reconditioned turbocharger Reconditioned injectors New EGR valve New DPF (diesel particulate filter) New intercooler New front driveshaft DSG transmission oil change (performed by a professional) Differential oil change The mechanical work was carefully carried out by myself, with the exception of the DSG transmission oil change. Invoices for parts and the transmission oil change are available. Equipment: Air conditioning Android car radio with Apple CarPlay Cruise control Electric mirrors Tow hitch 4 Michelin Alpin tires in very good condition Utility vehicle conversion with wood paneling and plywood flooring The vehicle is in excellent mechanical condition, starts perfectly, and drives very well.

Condition: used, mileage: 10 km, power: 110 kW (149.56 HP), first registration: 07/2026, fuel type: diesel, empty load weight: 1,881 kg, maximum load weight: 1,219 kg, overall weight: 3,100 kg, tire size: 215/65R16C, axle configuration: 4x2, wheelbase: 3,277 mm, next inspection (TÜV): 07/2028, fuel: diesel, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 5,330 mm, loading space volume: 6 m³, loading space length: 2,862 mm, loading space width: 1,628 mm, loading space height: 1,397 mm, Year of construction: 2026, front tire size: 215/65R16C, rear tire size: 215/65R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, low noise, navigation system, onboard computer, sliding door, soot filter, traction control, trailer coupling, Fiat Scudo panel van L3 XL 2.2MJ 110KW/150PS, new vehicle in stock, immediately available. Syncom: 506.6NG.4. Color: 5DL Gelato White 549. Gross vehicle weight: 3,100kg. Load compartment: L: 3,120mm, W: 1,870mm, H: 1,662mm. 6-speed manual transmission. KBG air conditioning. FI3 “CITY” package. K99 IVI mid audio system, 10-inch touchscreen, DAB, Bluetooth, WiFi, USB-C, navigation via Android Auto - Apple CarPlay. FI3 rear view camera 180°. XH3 rear parking assistance. Y0X digital instrument cluster, 10 inches. Y12 steering wheel remote control. Y2U Connect Box: emergency call and assistance system. Y1U light and rain sensor. Y2C speed limiter and cruise control. YF9 electrically adjustable and heated exterior mirrors. YRA 12V, 120W socket in the glove compartment. Y0U electric parking brake. FHB driver’s seat foldable, height-adjustable, with armrest and lumbar support, double passenger seat with storage compartments under the seat bench. Y1Z driver and passenger airbags. FJ0 16-inch steel rims with summer tires 215/65 R16 C 106T, wheel hub cover. FFZ spare wheel. AF1 ABS including brake assist and adaptive brake light. Y2L hill-start assist. FI7 sliding door, right side. FHL rear hinged doors, 50/50, opening 180°. K2D electric windows. KK2 central locking, 2 remote keys. FFI partition wall. FI3 Visiopark with 180° rear view camera and parking sensors. 16-inch steel rims with summer tires 215/65 R16 C. Fabric Curitiba Black. KI1 “ASSIST” package. Active camera-based fatigue and distraction detection. Y1K lane keeping assist. YYD collision warning and emergency braking assist. F93 display of permissible maximum speed. Y0M attention assist. Y2T high beam assist. Trailer coupling (will be retrofitted). We will gladly provide you with a financing or leasing offer. Optionally, we offer: wooden floor and side paneling on request. Please make a telephone appointment for a viewing. For questions, please contact Mr. Bernhard Höger: Phone number: or Email: More than 40 XXL pictures available on our website. Knjdpfx Afsztthxensc

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 1,881 kg, maximum load weight: 1,219 kg, overall weight: 3,100 kg, tire size: 215/65R16C, axle configuration: 4x2, wheelbase: 3,277 mm, fuel: diesel, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 5,330 mm, loading space volume: 6 m³, loading space length: 2,862 mm, loading space width: 1,628 mm, loading space height: 1,397 mm, Year of construction: 2026, front tire size: 215/65R16C, rear tire size: 215/65R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, low noise, navigation system, onboard computer, sliding door, soot filter, traction control, Fiat Scudo panel van L3 XL 2.2MJ 110KW/150HP, new vehicle in stock, immediately available. Syncom: 506.6NG.4 Color: 5DL Gelato White 549 Gross vehicle weight: 3,100 kg Load compartment: L: 3,120 mm W: 1,870 mm H: 1,662 mm 6-speed manual gearbox KBG Air conditioning FI3 PACKAGE "CITY" K99 Audio system IVI mid, 10-inch touchscreen, DAB, Bluetooth, WiFi, USB-C, navigation via Android Auto - Apple CarPlay FI3 Rear view camera 180° XH3 Rear parking assist Y0X Digital instrument cluster 10 inch Y12 Steering wheel remote control Y2U Connect Box: emergency call and assistance system Y1U Light and rain sensor Y2C Speed limiter and cruise control YF9 Electrically adjustable and heated exterior mirrors YRA 12V, 120W socket in the glove compartment Y0U Electric parking brake FHB Driver's seat foldable, height-adjustable, with armrest and lumbar support, double passenger seat with storage compartments under the seat bench Y1Z Driver and passenger airbags FJ0 16-inch steel rims with summer tires 215/65 R16 C 106T, wheel hub cover FFZ Spare wheel AF1 ABS including brake assist and adaptive brake light Y2L Hill start assist FI7 Sliding door, right FHL Rear hinged doors 50/50, opening 180° K2D Electric windows KK2 Central locking, 2 remote keys FFI Partition wall FI3 Visiopark with 180° rear view camera and parking sensors 16-inch steel rims with summer tires 215/65 R16 C Fabric Curitiba Black KI1 PACKAGE "ASSIST" Active camera-based driver drowsiness and distraction detection Y1K Lane keeping assist YYD Collision warning and emergency braking assist F93 Display of the permitted maximum speed Y0M Attention assist Y2T High beam assist We will gladly provide you with a financing or leasing offer. Optionally, we offer: Tow hitch incl. wiring harness 13-pin and installation, net 900 EUR Wooden floor and side paneling on request For a viewing, please arrange an appointment by telephone. If you have any questions, please contact Mr. Bernhard Höger: Telephone number: or Mail: Further up to 40 XXL Bi Knodpfx Afjztth Eonsc

Condition: used, mileage: 10 km, power: 110 kW (149.56 HP), first registration: 07/2026, fuel type: diesel, empty load weight: 1,849 kg, maximum load weight: 931 kg, overall weight: 2,780 kg, tire size: 215/65R16C, axle configuration: 4x2, wheelbase: 3,277 mm, next inspection (TÜV): 07/2028, fuel: diesel, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 4,980 mm, loading space volume: 5 m³, loading space length: 2,512 mm, loading space width: 1,628 mm, loading space height: 1,397 mm, Year of construction: 2026, front tire size: 215/65R16C, rear tire size: 215/65R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, low noise, navigation system, onboard computer, sliding door, soot filter, traction control, Fiat Scudo Panel Van L2 M 2.2 MJ 110 kW/150 hp, New vehicle in stock, immediately available. Syncom: 506.5NG.4, Color: 5DL Gelato White, 549, Gross vehicle weight: 2,780 kg, Load compartment: L: 2,512 mm, W: 1,870 mm, H: 1,662 mm, 6-speed manual gearbox, KBG air conditioning, FI3 PACKAGE "CITY", K99 Audio System IVI mid, 10-inch touchscreen, DAB, Bluetooth, WiFi, USB-C, Navigation via Android Auto - Apple CarPlay, FI3 Rear view camera 180°, XH3 Rear parking assist, Y0X Digital instrument cluster 10 inches, Y12 Steering wheel remote control, Y2U Connect Box: Emergency call and assistance system, Y1U Light and rain sensor, Y2C Speed limiter and cruise control, YF9 Electrically adjustable and heated exterior mirrors, YRA 12V socket, 120W in the glove compartment, Y0U Electric parking brake, FHB Driver's seat foldable, height adjustable, with armrest and lumbar support, double passenger seat with storage compartments under the seat, Y1Z Driver and passenger airbags, FJ0 16-inch steel wheels with summer tires 215/65 R16 C 106T, wheel hub cover, FFZ Spare wheel, AF1 ABS including brake assist and adaptive brake lights, Y2L Hill start assist, FI7 Sliding door on the right, FHL Rear hinged doors 50/50, opening 180°, K2D Electric windows, KK2 Central locking, 2 remote keys, FFI Partition, FI3 Visiopark with 180° rear view camera and parking sensors, 16-inch steel wheels with summer tires 215/65 R16 C, fabric Curitiba Black, KI1 PACKAGE "ASSIST", Active camera-based driver drowsiness and attention detection, Y1K Lane keeping assist, YYD Collision warning and emergency brake assist, F93 Display of permitted maximum speed, Y0M Attention assist, Y2T High beam assist. We will be happy to provide you with a financing or leasing offer. Optionally, we offer: Tow hitch incl. wiring harness 13-pin, and installation, net 900 EUR. Wooden floor and side paneling available on request. Please make an appointment by telephone for a viewing. For questions, please contact Mr. Bernhard Höger: Telephone number: or Email: More up to 40 XXL pictures available. Knsdpfezufx Sjx Afnoc

Year of construction: 2013, condition: excellent (used), HewSaw SRC200/250 Kedpfx Aezwnbhjfnsnc

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012535, empty load weight: 3,860 kg, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 06/2027, loading space length: 7,750 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: silver, Year of construction: 2026, Demonstration vehicle - Please note: images shown are archive photos. The vehicle may currently be in use! #Chassis – centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly angled, new design, featuring a "Load Lock" profile for lashing strap attachment - 1 pair of geared landing legs front, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 1 pair of geared landing legs rear, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 2 wheel chocks with holder - Side impact protection, aluminium - Underrun protection, steel - Quarter-shell mudguards - 2 plastic tool boxes with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with a padlock #Towing gear – centre-axle trailer - Drawbar with certified 50 mm towing eye, general haulage version - Lower coupling head on drawbar - Folding bracket with spring support on drawbar, guiding the connecting cables to the truck Ksdpfxozw Ep Ne Afnonc #Axles + suspension - SAF disc-brake axles, 430 mm disc diameter - "Axles/chassis laser-measured" reducing tyre wear and fuel consumption - Air suspension with lift & lower valve #Wheels and tyres - 385/65 R 22.5", manufacturer's choice - Steel rims, factory silver #Braking system - Two-line compressed-air braking system - Spring-loaded parking brake - Vehicle stability system - Duomatic connection front, with connecting line to towing vehicle, direction of travel right - EBS electronic braking system, EBS connector front with connecting cable #Electrics - 24V multi-chamber LED lights, yellow LED side marker lights, LED number plate light (note: false fault warnings possible with certain towing vehicles despite correct function) - 2 white position lights front - 2 white/red outline marker lights rear - 1x 15-pin plug front with connecting cable, direction of travel right - Reversing camera system, colour flat-screen monitor, wireless link, screen with suction-cup mount, powered via 24V vehicle socket #Floor - Phenolic-coated plywood, approx. 30 mm, high point-load capacity - Note: floor warping possible due to weather - "Premium floor sealing", sealed all round - Platform length approx. 7,750 mm #Front wall / front corner posts - 25 mm aluminium hollow-section, 1,950 mm high, corner posts steel, reinforced profile, +2 additional centre supports - Front wall internally lined with 1,250 mm high phenolic-coated plywood #Centre stakes - 2 pairs of folding stakes at side-board height, foldable and removable #Side boards - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, without tarpaulin rail #Rear wall / rear corner posts - 1 pair of folding stakes at side-board height, foldable and removable - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, with internal folding step #Country of registration / plates - Warning plate ECE-70 - Warning plate "A" for waste transport, foldable - ADR warning plate at rear, foldable #Paint finish - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation"

Condition: excellent (used), Year of construction: 2016, Fish / Sardine procesing line SIA "PERUZA " Type of fish - Sardine Fish length - 140/180 mm Fish per kg - 44/27 # Fish condition Fresh; defrosted (not recommended) Equipment characteristics Productivity (for one autonobbing head) - Up to 200 fish/minute Knodpfezhibkox Afnoc Connections -Electricity Voltage - 400 V Phase - count 3 - Frequency - 50/60 Hz Power (for one autonobbing line) - 8 kW Power (for one vacuum system) - 7.5 kW Power (for Nobbing machine for rigor mortis fish) - 0.75 kW Power (for logistic conveyour system) -5 kW Water Pressure >3 bar Other data : Humidity resistance IP 65 - Materials used - Stainless steel AISI 304, AISI 316, Plastic ERTALON 6SA, POLYURETHAN, PE HD 500 Environment - Indoors (temp. +10....+35 -

Year of construction: 2002, condition: used, functionality: fully functional, The Getecha grinding mill, model GRS 180 with water cooling, is for sale. Power: 2.2 kW Knsdsy Ugiuspfx Afnjc Blades: 3 pieces Screen: 6 mm

Condition: new, Equipment: crane, Two-axle truck, 180 hp, brand new, 0 km, fitted with a 4.10 x 2.55 m three-way tipper body, PM series 23.5 crane with 5 hydraulic extensions + jib with 2 hydraulic extensions, 4 stabilizers, remote control, manual transmission, Euro 6 compliant. Please note: The vehicle description is provided for informational purposes only and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data. Ksdpfsvnu D Ijx Afnonc

Condition: good (used), Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm -Thickness: 18 mm -T-slots: 12 mm Kedob E N Ttopfx Afnjnc -Surface: milled -Weight: 3.5 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: MOTOVARIO TKF/5 -Engine manufacturer: Knodpoc Nnansfx Afnsc -Motor power: 0.37 kW -Speed range: 35-180 rpm -Motor: adjustable -Diameter hollow shaft: Ø 24 mm -Construction: B3 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 445/190/H265 mm -Weight: 21 kg

Condition: excellent (used), Marine diesel piston, diesel engine piston Knsdpfx Asb A H Agjfnoc -Piston: Ø 199 mm -Piston height: 265 mm -Piston pin: Ø 75 mm -Distance from center of piston pin to top of piston: 155 mm -Quantity: 2 pieces available -Price: per piece -Weight: 9.025 kg

Condition: good (used), TIG welding machine Knedsb A H I Sepfx Afnoc -Nimak electrode unit -Dalex converter -Hose package -ground cable

Condition: good (used), Punching machine, hydraulic punching machine, hydraulic press, hydraulic press -Insert tool -Width: 290 -Length: 550 -Height: 260 -with hydraulic unit -Steering -Foot switch -Dimensions: 800/700/H1300 mm -Weight: 400 kg Knsdpfxsb A H Tas Afnsc

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MULTIMILL 1000 by EDEL Werkzeugmaschinen GmbH Kodpfopiqzkjx Afnenc New-machine quality at a price that takes the pressure off your costing. The MULTIMILL 1000 is a 5-axis all-rounder with turning capability, mastering milling and turning in a single setup. Proven EDEL technology, combined with our complete factory refit procedure: every assembly overhauled, all wear parts renewed, fully measured and backed by factory warranty. Technical specifications: 1 5-axis milling machine EDEL MM1000 X/Y/Z: 1,000/800/700 mm 1 NC universal milling head M21 B-axis, (-)10° to (+)187°, 900/1,680/4,000 Nm, 330°/s, (55 rpm) 1 Milling spindle CS-21-180-A 21/32 kW, 100/130 Nm, 18,000 rpm, HSK-A63 1 NC rotary table CRT/1000/H/HT 960/2,048/4,000 Nm, 570°/s, (95 rpm), 20,000 N (centric) Face plate diameter: 900 mm 1 Heidenhain TNC 640 5-axis contouring control electronic handwheel HR 510 DXF converter CAD viewer KinematicsOPT enhanced energy efficiency 1 Remote service 1 Extraction unit for oil and emulsion mist filter systems, capacity approx. 2,000 m³/h cascaded filtration 1 Coolant/lubricant system 950 litre tank capacity External coolant supply: 30 l/min / 20 bar Through-spindle coolant: 20 l/min / 50 bar Wash-down gun: 40 l/min / 2 bar 1 Workpiece measuring system Touch probe BLUM TC 60 BRC radio technology 1 Tool changer HSK-A63 / 52 pockets Tool diameter 75/130 mm Tool length 300 mm Tool weight 8 kg 1 Chip conveyor Hinge belt / scraper belt conveyor 1 Switchable external air cooling (coolant / air) Coolant: 20 bar / Air: 6 bar 1 Turning technology package Machine control Heidenhain TNC 640 Rotary table CRT/1000/H/HS Tool interface HSK-A 63 Spindle clamping device Tool measuring system for turning tools 1 Switchable internal through-spindle cooling (coolant / air) Coolant: 50 bar / Air: 6 bar 1 Tool changer HSK-A63 / 80 pockets INSPECTION AND DEMONSTRATION AVAILABLE AT ANY TIME Arrange an appointment at our plant, and we will show you the machine in live cutting operation.

Condition: refurbished (used), functionality: fully functional, load capacity: 210 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: Kedjrqf Tkepfx Afnjnc - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive full warranty coverage. Technical Specifications - Center height: 180 mm - Swing over bed: 358 mm (can be extended with optional outboard turning attachment – depending on workpiece) - Center distance: approx. 560 mm (extendable) - Spindle connection: M33 x 3.5 with ASR (Euro) anti-loosening groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 50 – 1,230 rpm and 150 – 3,700 rpm Kedpfetphy Aex Afnenc - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Total length: 1,345 mm - Weight, freestanding version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by carrier: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, woodworking lathe, turning, woodturning, turning tools, wood turning, machinery Reference: R-A0117

Condition: refurbished (used), functionality: fully functional, load capacity: 150 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de". Ksdpfx Aerwnphjfnjnc

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,000 mm, The horizontal machining centers in the XpertK series are characterized by their outstanding modularity. Choose from a variety of table variants and matching milling heads, complemented by a wide selection of spindles. The XpertK machines are ideal for special requirements where standard machines are not sufficient and offer customized flexibility and individuality Xpert K 3512 - Horizontal machining center - Series: Xpert K - Travel X/Y/Z: 3500 x 1200 x 1000 mm - Optional Y-axis: 1600 mm - Milling head: M-Series fork milling head - Spindle: 12,000 min-1 / 53 KW / 253 Nm - Tool holder: HSK-A100 - Control: Heidenhain TNC 640 - Clamping surface: 4,000 x 2,200 mm - Payload: 15,000 kg Kodsr H Hhnjpfx Afnsnc - Rapid traverse: 30 m/min - Acceleration: 3 m/s² Modularly expandable, further options: - Sliding table X-axis - Cross table X and W-axis - Rotary table X and C-axis (Ø 2,000 mm) - Table travel X-axis up to 6,000 mm - Table travel W-axis 1,200 mm - Movable work unit Y- (vertical), Z- (slide) and W-axis (1250 mm) - Milling and turning machining possible - 18 spindle variations - Clamping area can be extended up to 6,000 x 2,500 mm

Condition: new, Zudrückwerkzeuge von Trumpf/Wila typ für Trumpf/Safan Darley Knedpfx Afor Ai Tkonsc

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray Knjdpfxoh I Nqwj Afnoc - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: ready for operation (used), MAC115D-1-DS-S-F/180-B-0 Permanent Magnet Motor, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 32 mm, used, normal signs of wear, 100% functional. ATTENTION: Please inquire separately about the costs for packaging and shipping! Ksdei D Ngkspfx Afnenc

Year of construction: 2017, condition: used, Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, screw conveyor Kedpfeh Ay R Eex Afnsnc -Manufacturer: olocco, rotary valve type VPS 180 -Inlet opening: Ø 120 mm -Outlet: 150 x 115mm -Shaft: Ø 25 x 60 mm -Dimensions: 320/250/H245 mm -Weight: 27 kg