Used Wika Manometer for sale (208)

Condition: new, Year of construction: 2026, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod Dodoxaar Djpfx Am Tskp * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates Dkodexaa H Ijpfx Am Tsp - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, Year of construction: 2026, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec Dkedoxabnaepfx Am Tep engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0,9 mm weight of the machine ca. 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German Dkodpfx Aoxaaqtem Top

Condition: new, dimensions: innen 1160 x 870 x 850 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 150 kg total power requirement 1,2 kW weight 160 kg range L-W-H 1320 x 1200 x 1760 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting Dkodpfx Asxabugjm Tep * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: new, dimensions: innen 1160 x 580 x 580 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 120 kg total power requirement 1,2 kW weight 115 kg range L-W-H 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal Dkedsxak Dqjpfx Am Tjp - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right Dodjxabpwspfx Am Tokp - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, pressure 20,0 t stroke 185 mm table surface area 170 mm Breite column travel between the guideways 510 mm weight of the machine ca. 112 kg dimensions of the machine ca. 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame Dksdsxaapcepfx Am Tsp

Condition: new, cutting diameter 225 mm saw band length 2480 mm table height 910 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 160 x 160 mm capacity 60 degrees: round 100 mm capacity 60 degrees: square 100 x 100 mm turning speed range: 45/90 m/min dimensions of saw-band 2480x27x0,9 mm total power requirement 1,5 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430x720x1700 mm Scope of delivery : Dkedpfx Amjxaa Tbs Tsp - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Dkjdpfx Amjxxxqvj Tep Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: Djdperai N Asfx Am Tokp - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter - Control cabinet

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR General: -Temperature range up to 90°C water -Robust steel sheet housing -Unit on rollers Hydraulics: -Submersible pump (manufacturer: Speck) with pressure/vacuum function (leak stop operation) -Qmax. 60 l/min. -Pmax. 3.8 bar -Tank and heating element made of stainless steel -Heating power 9 kW -Tank capacity 12 liters -Fittings made of brass/stainless steel -Automatic water refill -Electric level control -Indirect cooling system (plate heat exchanger) -Cooling capacity ~40,000 kcal/h (10 plates) -Display manometer -Integrated bypass Dodpfx Amjd Aarus Tskp -Solenoid valves for cooling and refill Electrical and control: -Electronic, self-optimizing PCB control -Control voltage in the unit: 24 V AC -Acoustic and visual alarm indicator -Solid State Relay -Safety thermostat -Sensor failure monitoring -Monitoring of hose breakage and leakage -Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for oil (heat transfer fluid) -Robust steel sheet housing -Unit on rollers Dedpfxoddv Itj Am Tskp Hydraulics: -Sealless submersible pump -Qmax. 60 l/min. - Pmax. 3.8 bar -Tank and heating element made of stainless steel -Heating power 9 kW -Tank capacity ~20 liters -Fittings made of brass/stainless steel -Manual oil filling -Mechanical level indicator -Indirect cooling system (tube bundle heat exchanger) -Cooling capacity ~40,000 kcal/h -Manometer -Bypass -Solenoid valves for cooling Electrical and Control: -Electronic PCB control -Solid State Relay -Safety thermostat -Sensor break monitoring -Connection cable with plug Available in approximately 4 weeks!

Year of construction: 2012, condition: good (used), Medium-pressure conveying system for wood chips approx. 4 tons per hour Conveying line originally 180 m, 150 mm, partially available Air flow rate approx. 2,350 m³/h Motor power Three-phase motor according to IEC 55 kW Dkodpfxob Uyizs Am Tsp Degree of protection IP54 1 Housing made of high-quality gray cast iron, equipped with two axis-parallel and centrally arranged, dynamically balanced rotary pistons, with hardened and ground, helically toothed precision control gears, each mounted in roller bearings. Drive via V-belts, with the two pulleys and the associated high-performance narrow V-belts, as well as a protective cover. 1 Drive unit with motor mounting rails, shaft connection with easy-to-assemble taper-lock clamping sleeves, completely mounted on a common base frame. 1 Combined intake filter silencer (absorption silencer) 1 Resonance absorption pressure silencer, designed as a base frame 1 Base frame 1 Pressure valve 1 Check valve 1 Elastic connecting sleeve with clamps 1 Manometer 1 Set of vibration isolators with mounting screws 1 Electrical pressure monitoring consisting of a pressure transmitter and a display device, as well as an electrical output signal 1 Sound enclosure made of galvanized sheet steel with an oil collection tray and ceiling coating RAL 5001, segment design with internal lining and forced ventilation, fan wheel driven by the blower shaft. Sound enclosure for outdoor installation.

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, = Additional Options and Equipment = - Air suspension = Notes = EUROMIX MTP 10 cbm Mixer Semi-Trailer (Rental available) Unladen weight approx. 6,400 kg (trailer only) - New - 2-axle Dkodpfx Ajym Szfem Tsp - 10 t SAF axles - 1x lift axle, air suspension, ABS - Tires: 385/65 R22.5 - Technical gross weight: 38,000 kg EUROMIX MTP - Concrete Mixer Superstructure EM 10 L - Lightweight Design Model: EM 10 L Nominal capacity: 10 m³ ready-mix concrete Mixing drum in lightweight design Mixing drum made of HARDOX S450 Mixing spirals made of HARDOX S500 (lightweight version) Gearbox brand: ZF P5300 Hydraulic pump brand: Bosch Rexroth Hydraulic motor brand: Bosch Rexroth Integrated oil cooling system Mechanical mixing controls and electric start-stop function Compressed air water system Water connection at operator platform with hose line Water filling pipe on one side with C-coupling Mixing drum with service hatch Ladder with operator platform Rubber attachment on the charging hopper Swiveling, single-arm discharge chute made of steel Wear plates in charging hopper, discharge tray, and discharge chute Drum locking for securing drum during maintenance Polyurethane primer Weight approx. 3,650 kg, tolerance +/- 5% With emergency stop function according to EU safety standards Steel mudguards over rear axles 2x extension chutes (steel or plastic) Water system 500 l water tank (compressed air) Steel water tank Shut-off valve installed under the water tank in the filling pipe Water connection with "C"-coupling Operation & electrics Mixer controls – mechanical at rear Start-stop system (with EDC) Geometric volume: 17,361 L Water tank volume: 11,121 L Tank inclination: 11.3 Length: 7,075 mm Width: 2,300 mm Height: 2,748 mm Optional Equipment: Extension chute (plastic - steel - aluminum) Folding chute (plastic or steel) Retaining flap for swivel chute Plastic toolbox Stainless steel toolbox Additional unpressurized additive tank Pressurized additive tank Shovel holder ¾ drum cover Reversing camera LED work lights EuromixMTP intelligent drum control (electronic mixer control) Step at underrun guard with handrail Water meter Pressure manometer Frame cover Fire extinguisher Holder for flow concrete pipe (5 m long) Adapter for flow concrete pipe (reduction chute) Hydraulic chute support For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further Information = Year of manufacture: 2026 Applicable material: Concrete Gross weight: 38,000 kg Superstructure brand: EuromixMTP EM 10 L Please contact Denis Omeragic for further information.

Condition: new, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds, 400 V: 45 / 90 m/min Coolant pump, S1 100%: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 190 kg Dodpfx Amjd Du T Is Tjkp Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for belt tension • Vise with quick-release mechanism • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Bernardo Dual-Column Bandsaw MBS 300 DG-V PRO Technical Specifications Cutting capacity, round / square 90° 255 mm / 210 x 210 mm Cutting capacity, flat 90° 310 x 210 mm Cutting capacity, round / square 45° R 220 mm / 210 x 210 mm Cutting capacity, flat 45° R 220 x 200 mm Cutting capacity, round / square 45° L 230 mm / 200 x 200 mm Cutting capacity, flat 45° L 230 x 200 mm Cutting capacity, round / square 60° R 135 mm / 135 x 135 mm Cutting capacity, flat 60° R 135 x 135 mm Working height 930 mm Saw band dimensions 2750 x 27 x 0.9 mm Cutting speeds, infinitely variable 20 – 80 m/min Coolant pump 100 W Motor output power S1 100% 1.5 kW Motor input power S6 40% 2.2 kW Voltage 400 V Machine dimensions (L x W x H) 2000 x 1250 x 1900 mm Dksdpfjd Hzbwox Am Tjp Weight approx. 350 kg Scope of supply • Saw band • Workpiece stop • Base frame • Manometer for band tension • Saw band guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Bernardo Horizontal Bandsaw HBS 275 PRO Technical Specifications Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Saw band dimensions: 2480 x 27 x 0.9 mm Cutting speed: 45 / 90 m/min Coolant pump: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Dodpjfigzzsfx Am Tjkp Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 180 kg Scope of delivery: • Saw band • Workpiece stop • Base frame • Manometer for band tension • Saw band guide with carbide inserts • Vise with quick-release mechanism • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic shut-off at the end of the cut

Condition: good (used), Blasting System MHG SMG 45 K (Negative Pressure Cabinet) - Working area: 1100x660x700mm - Integrated extraction system - Two side doors / dust-tight sealing - Double-walled, sound-insulated with foam - Blast gun with nozzle - Operating pressure: 3–7 bar - On/Off – Lighting – Extraction Dkodsyib Dfspfx Am Tsp - Pressure regulator – Manometer – and foot switch - Viewing window Dimensions (LxWxH): 1.5x1.6x1.8 meters / 380 kg Subject to errors and omissions.

Condition: new, Year of construction: 2022, machine/vehicle number: 20b015, Fully Automatic Printing Tower for Crate Printing on 4sides Dedpfxeihccfo Am Tokp Electro pneumatically controlled fully-automatic screen printing machine for rotary printing, with microprocessor control, equipped with feed, printing and ejector station, pneumatic squeegee pressure adjustable via manometer, pneumatic squeegee switching, with squeegee quick clamping system, squeegee stroke, adjustable squeegee pressure. Printing movements individually adjustable when working in one-shift operation. All four sides of the crate will be printed at the same time in different colours and motivs. 800crates per hour enable a precise reproduction ability and a high productivity. Special hose pumps apply the ink onto the horizontal positioned screen frames. In that way each side of the crate gets an even ink application. The screens can be exchanged within minutes which, in turn, reduces the holding time. The multi-functional system of the printing tower makes a change of both logo and ink possible within short time thus enabling short set-up times. A modern electronic control via display ensures the requested process control and helps analysing any faults. The step-by-step operation mode show the printing status during the automatic production run resp. during the set-up by the operator.

Condition: used, Semi-automatic screen printing machine SIRIMAC 4560E Electromechanical machine with parallel lifting upper frame, print area: 45 x 60 cm, vacuum table plate: 60 x 80 cm, screen size: 75 x 100 cm, screen up-and-down motion via geared brake motor, with cross-travel squeegee system, motorized and adjustable squeegee drive, print and flood speed independently adjustable, adjustable squeegee stroke via limit switch, with pneumatic squeegee reversal, pneumatic squeegee and flood squeegee pressure adjustable via manometer, print and flood squeegees with quick-clamp system, adjustable screen lift, with pre-vacuum function, single-stroke or automatic print mode selectable, pre-squeegee function, multiple print, connection: 400V, 50Hz, 10A, compressed air 6 bar required, used condition. Dsdpfx Amjw N N Are Tekp

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar, but not a Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High-pressure pump: Falch xs31.1-30-500, 30 l/min at 500 bar (year of manufacture 01/08) - Motor: Electric, 30 kW - 1250 l water tank - Manometer - Pressure regulator - Safety valve - Steel frame, powder-coated - Covers made of aluminum - Forklift pockets and crane eyelets - Dimensions with 1250 l water tank: approx. 1,100 x 1,760 x 1,770 - Unladen weight: 1,085 kg Dodpfx Amog Tm N Ae Tekp - Year of manufacture: 2013 - Operating hours: approx. 1500 h Condition: High-pressure pump overhauled in 06/2022. In very good used condition.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter Dkedpfx Amodqkrws Top - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Dkodpfx Aev T Aqyom Tsp Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: used, Auslauf NW 50 oben Dedpfxjxytwmo Am Tekp Druck Manometer mit Auslauf Optional : div. Armaturen Anzahl verfügbar (Angebot pro Stk.): 11