Used Wika Manometer for sale (219)

Condition: used, Year of construction: 1984, Technical details: drum revolutions: 16 rpm U/min speed down: min./max.: 0,23 / 0,34 m/sec. operating pressure: 85,3 Psi - ca. 6 bar bar traction force - max.: 15 traction force: min: 10 kN weight: 389 kg Pjdpfeu Nv Ubex Alwjgt dimensions L x W x H: 1,1x0,9x0,75 m - pneumatic rope winch - stable steel construction - floor plates size: 700x340mm - display via manometer - pressure connection via 1 inch thread - drum brake - dimension of the rope drum: Ø 400 x Ø 250 x 230mm - without rope!!!! *

Condition: used, Year of construction: 2001, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 32191 l Operating pressure: 5 bar Operating temperature: 20 °C Width: approx. 3850 mm Pgedpfxsztyans Alwst Height: approx. 4420 mm Material: stainless steel 1.4301 Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: 1 cooling jacket (154 l, 2 bar, glycol), outlet DN65, manhole, safety valve, CIP pipe with spray head, manometer, ladder bar, sampling, temperatur sensor (PT100), crane eyelets Periphery: own temperature control

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Pgedpopbvqvsfx Alwot Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar, but not a Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High-pressure pump: Falch xs31.1-30-500, 30 l/min at 500 bar (year of manufacture 01/08) Pjdpjg Tm N Aefx Alwogt - Motor: Electric, 30 kW - 1250 l water tank - Manometer - Pressure regulator - Safety valve - Steel frame, powder-coated - Covers made of aluminum - Forklift pockets and crane eyelets - Dimensions with 1250 l water tank: approx. 1,100 x 1,760 x 1,770 - Unladen weight: 1,085 kg - Year of manufacture: 2013 - Operating hours: approx. 1500 h Condition: High-pressure pump overhauled in 06/2022. In very good used condition.

Condition: new, cutting diameter 315 mm dimensions of saw-band 3460 x 1,1 x 34 mm cutting speed 35 / 70 m/min cutting width 400 x 250 mm 250 / 280 mm Impact energy 220 / 280 mm 180 mm 140 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions 2,1 x 1,0 x 1,5 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right Podpewfyq Tefx Alwegt - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: Pgedpfx Aljxttc Aswst * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: new, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in industrial applications. Technical Data: Cutting Capacity: Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Electrical connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Pedpfjqbr Suex Alwsgt Weight, approx.: 295 kg Features: - Double mitre saw with pivoting saw frame from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable saw speed for optimum adjustment to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Condition: new, Year of construction: 2026, neu 2026 070240 Oktober 2026, Zwiswchenve Türkei 8300 € 160.19 € 1 100 to horizontal verschiebbar 300 mm 1070 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2430 mm 1500 kg demo machine / mint condition net price (price for new machine € 9.000,00) horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading Pedpfswirtzjx Alwegt 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Pgjdspvk Diepfx Alwet Opening timer

Condition: new, Year of construction: 2026, pressing force: 20 t, DURENDUS 20 T Workshop Press – C-Frame Press – 600 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered to a customer as a custom order. We can supply this machine from stock or manufacture it as new – including custom options per your requirements. This is a hydraulic workshop press suitable for pressing, straightening, and assembly tasks in both workshop and industrial environments. Base Price: €3,120 net Options (on request): The listed options are based on implemented customer projects and allow targeted adaptation of the machine to the specific application. The base machine is already a functional standard version – in practice, it is commonly extended with additional features and configured to project-specific requirements. * Table plate with X-form T-slot (from 60 t) * Pressure adjustment * Lateral movement of the ram (from 60 t) * Bending tool (from 60 t) * Anti-rotation cylinder with manual stroke setting * V-profile straightening support in combination with table plate * LED lighting * Foot switch * Cooling ===== Technical Data & Information: ==== General Information * Design: Workshop press * Press force: 20 t (optionally adjustable) * Total weight: approx. 350 kg * Overall dimensions (W × D × H): 1,100 × 700 × 2,350 mm ==== Working Area * Clear width: 600 mm * Open depth: 200 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 600 / 470 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 90 mm * Piston rod: Ø 50 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 7.8 mm/s * Return speed: 11.3 mm/s ==== Hydraulics & Drive * Pump capacity: 3 l/min * Motor output: 0.75 kW * Hydraulic tank: 12 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Manual lever operation * Fine adjustment via hand lever * Power connection: 400 V / 50 Hz * Total connected load: approx. 1 kW ==== Equipment * Height-adjustable crossbeam with bolt locking * Chain mechanism for table adjustment * Manometer for pressure display * Emergency stop button * CE certification * Double-layer coating according to RAL Pgodjy E Nnnepfx Alwet ===== Pressing, extraction, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, C-type press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety standards, as they fully comply with the Brazilian national safety guideline NR 12 – which builds upon both. Our key strength lies in special purpose machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. Our presses are predominantly equipped with hydraulic components from leading European manufacturers.

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: Pgjdexaar Dspfx Alwet - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display Pgsdpfexabnaox Alwst - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, empty load weight: 6,220 kg, maximum load weight: 32,780 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, loading space length: 7,400 mm, loading space width: 2,550 mm, loading space height: 1,550 mm, loading space volume: 29 m³, total length: 7,400 mm, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: grey, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, Reference no. for inquiries: 41553 Reisch, 24m³ tipping body * Year of manufacture: New * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection for coupling head (red + yellow) * Connecting plug 2x7-pin * Connecting plug 15-pin Pgjdpfx Aozp Unljlwot * Storage box / Toolbox * Steel tipping body * Platform * Roll-up tarpaulin * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 6,220 kg * Payload: 32,780 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 100% - 100% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Interior dimensions: L=7400 mm, W=2550 mm, H=1550 mm * Internal volume: 29 m³ * Pallet spaces: 18 * Reisch Steelpipe-R 26m³ * New * Warranty from initial registration * Interior flap * Fifth wheel height 1200mm * Hyva 250 bar tipping cylinder * Floor 5mm, side walls 4mm * Hardox 450 * SAF supports * 6x Dunlop tires * Manometer * Roll-up tarpaulin 900g/m² Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive services include, for example: * Purchase / Sale / Rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists, we will be happy to advise you.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 22750 € 436.8 € 150 to fix 1520 mm 300 mm 1520 mm 610 mm 9 mm/s 5 mm/s 10 mm/s 10 mm 600x1520 mm 100 mm 190 mm 2630 mm 1000 mm 2450 mm 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool Pgsdpsypbwnjfx Alwst manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Workshop Press – C-Frame Press – 700 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered as a customer-specific order. We can supply you with this model from stock or manufacture it anew – with consideration for customized options if required. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in both workshop and industrial environments. Base price: €3,550 net Options (available on request): The listed options are derived from completed customer projects and enable precise adaptation of the machine to the specific application. The basic model provides a fully functional standard specification; in practice, it is most often enhanced through additional equipment and configured according to project requirements. Cross-grooved T-slot table (from 60 t) Pressure adjustment Lateral movement of the ram (from 60 t) Bending tool (from 60 t) Anti-rotation cylinder with manual travel adjustment V-profile straightening block in combination with table plate LED lighting Foot switch Cooling system ===== Technical Specifications + Information: ==== General Data Design: Workshop press Pressing force: 30 t (optionally adjustable) Total weight: approx. 500 kg Overall dimensions (W × D × H): 1,150 × 700 × 2,350 mm ==== Working Area Clear width: 700 mm Clear throat depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 700 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 115 mm Piston rod: Ø 65 mm Height adjustment: via chain mechanism ==== Speeds Psdpfoy Hixcjx Alwjgt Idle speed: 10.4 mm/s Return speed: 15.3 mm/s ==== Hydraulics & Drive Pump capacity: 6.5 l/min Motor power: 1.5 kW Hydraulic tank: 14 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 2 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Manometer (pressure gauge) Emergency stop switch CE certification Dual-layer coating to RAL standard ===== Pressing, ejection, assembly, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured according to German machinery directives and European Machinery Directive 2006/42/EC, as well as all EC norms and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our core strength is custom machine building and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. Our presses are equipped primarily with components from leading European manufacturers.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 46400 € 886.24 € 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Pgjdpjwiry Iefx Alwst incl. pressure switch

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Pgjdpfx Ajx Nugdelwst Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Podpezhd Nisfx Alwogt Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer Podpfx Aedqkrwjlwsgt - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual Pgsdoxabcwjpfx Alwot

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), PTC CJ-1E high-pressure cleaner, similar to but not an Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, or Weidner model. - Operating pressure: 110 bar - Flow rate: 12 l/min - Motor: Electric, 4-pole, 230V, 2.2kW, 1400 rpm - Dimensions: 540 x 440 x 680 mm - Dry weight: approx. 40 kg - High-pressure pump: Comet three-piston pump with ceramic pistons - Robust plastic housing made of injection molding - Practical holder for the spray gun with lance - Self-priming pumps with EASY-START system - Handle with holders for the power cable and the high-pressure hose - Easy maintenance by simply removing the front cover - Large wheels (220 mm diameter) for easy movement on steps and over uneven terrain - Manometer - Built-in professional pressure relief valve - Delayed total stop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainless steel hose reel with 30 m HD hose, 1/4" - 2 pieces of 1/4" male thread pipe cleaning nozzles - Spray gun with washing lance and flat spray nozzle Pgodpfx Aljgcbzcowst The CJ-1E is a mobile high-pressure cleaning unit, ideal for cleaning and removing blockages in pipes with diameters from 30 to 120 mm. Equipped with a 2.2 kW, 230V electric motor, it can be used in apartments, houses or commercial premises for cleaning sinks and toilets, as well as for gardens and general cleaning. The Comet LW-K pump with Easy-Start and pulsation function guarantees extreme reliability and high cleaning performance. The CJ-1E can be used in both vertical and horizontal positions. The total stop function ensures that the unit is switched off when not in use. The robust plastic housing and large wheels provide extreme strength and optimal maneuverability.

Condition: new, Year of construction: 2026, pressing force: 150 t, DURENDUS 150 T Workshop Press – C-Frame Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered according to a specific customer order. We can supply this machine from stock or manufacture a new one for you – gladly taking individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in the workshop and industrial sector. Base price: €6,900 net Options (on request): The listed options are based on completed customer projects and allow for targeted adaptation of the machine to the respective application. The base version represents the basic functional model – in practice, it is most often expanded with additional equipment and configured to suit specific projects. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Adjustable pressure control - Sideways movement of the ram (900 mm) - Bending tool - Anti-twist cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data & Information: ==== General Information Pedsy Hrkuspfx Alwegt Design: Workshop press Pressing force: 150 t (adjustable option) Total weight: approx. 1,400 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,650 mm ==== Working Area Clear width: 1,250 mm Clear depth: 400 mm Daylight: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 230 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Approach speed: 8 mm/s Return speed: 12.2 mm/s ==== Hydraulics & Drive Pump capacity: 20 l/min Motor power: 5.5 kW Hydraulic tank: 34 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Lever control Manual fine tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 6 kW ==== Equipment Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Dual-layer paint finish according to RAL ===== Pressing, removing, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, mounting press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC norms, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for our hydraulic systems.

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: Pjdpfx Aey Ii Dzjlwegt A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 17850 € 342.72 € 1 100 to 1000 mm 300 mm 7.5 kW 2110 mm 1000 mm 2275 mm 1900 kg 1 680 mm 1020 mm 5 mm/s 10 mm/s 6 mm 100 mm 190 mm 2 guidings big upper tool holder and table witht-slots Podpswiqm Hofx Alwogt upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules

Condition: new, TIGERMETAL WH60 – Hydraulic Workshop Press 60 Tons | Electric + Manual Pump Instead of €9,237 gross RRP, now only €5,899 net (€7,020 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH60 workshop press is a powerful and robust solution for demanding pressing operations in workshops and industrial environments. With a pressing force of 60 tons, the machine is ideal for straightening, pressing, and bending a wide variety of workpieces. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine adjustment for sensitive applications. The solid steel construction and the laterally adjustable cylinder allow versatile applications while ensuring high stability and safety. 🔧 Technical Data: Model: WH60 Manufacturer: TIGERMETAL Pressing force: 60 tons Drive: Electric motor + manual pump Motor power: approx. 2.2 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 265 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 670 kg Advantages: ✔ Combined operation (electric + manual) ✔ High pressing force for industrial applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder ✔ Durable, heavy-duty steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Expandable with accessories (e.g. prisms, support plates) A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Podpfjf Sqcrex Alwjgt Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The pressure cylinder is mounted on a sliding carriage, allowing it to be moved sideways. This ensures optimal use of the maximum frame opening width. A demonstration machine can be tested on-site under power. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information without guarantee! Worldwide delivery available! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.