Used Winter Dowel-Hole Drilling Machine for sale (67,408)

Condition: used, Year of construction: 1998, throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Podpfsw D Hi Tsx Abhepu

Condition: used, Year of construction: 1999, throat 290 mm bore stroke 160 mm total power requirement 1,9 kW Pedpfx Aew En D Uobhjpu Description to follow!

Condition: used, bore capacity in steel (diameter) 60 mm throat 400 mm Ppedpfx Abjwftt Ijhsu total power requirement 4,4 kW weight of the machine ca. 1,7 t

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 32 mm throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Pjdpfxsw En D Is Abhspu Description to follow!

Condition: used, number of spindles 4 bore capacity in steel (diameter) 23 mm bore stroke 150 mm Ppsdpfet Hw U Nex Abhou total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Pjdpfjzff A Ejx Abhjpu Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: new, SERRMAC TCS and TC Drilling and Milling Machine (Cross Table) New, “CE” certified 3-year warranty Automatic feed High-efficiency transmission and electronic variable speed drive via vector inverter. Coolant system for cutting tools Threading via inverter, complete with digital tachometer Threaded spindle axis for CM4 tool clamping Cross table: 800 x 255 mm Drilling capacity in R50 steel: ø 50 mm Ppodpfxofh Si Uj Abheu Tapping capacity in R50 steel: M 26 Spindle taper: CM4 Spindle stroke: 145 mm Spindle shank diameter: 72 mm Automatic feed: 3 speeds: 0.05 – 0.1 – 0.2 rpm Automatic feed with electromagnetic clutch: 3 speeds: 0.05 – 0.1 – 0.2 mm/rev Prismatic column Cross table Inverter drive Spindle speed: 45 – 2150 rpm Motor power (380 V – 50 Hz): 3 kW “T” slot dimensions: 14 x 14 mm Cross table: longitudinal travel, manual axis X: 585 mm Cross table: transverse travel, manual axis Y: 240 mm Dimensions (h x w x d) with column: 1,986 x 1,340 x 1,280 mm Weight: 780 kg

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Ppodpfxofrbtdj Abheu Misc accessories MARCELS MASCHINEN CH

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T Podpfx Aey Udrmobhopu If you have any further questions, please do not hesitate to ask.

Condition: used, table width: 695 mm, table length: 1,200 mm, BOHNER & KÖHLE Knee-Type Milling Machine / Router, Podezdrn Sopfx Abhopu used, equipped with: rotary table, clamping surface approx. 1,200 x 695 mm, milling spindle with 1.5 HP, speed range: 700, 1,400 and 2,800 rpm. The bevel gear, which can be seen in picture no. 5, is not included in the scope of delivery! Technical specifications: weight approx. 3000 kg dimensions (l x w x h) approx. 2400 x 2300 x 2750 mm.

Condition: used, Year of construction: 1992, Elcos 2 head drilling machine is a machine manufactured by Elcos in 1992, with a format of 45 x 150 mm. Currently stored in Germany, it features a drill distance of 45 - 150 mm, space behind the drill heads of 100 mm, and is a double head paper driller. It operates with a lever and is single phase 240 volts. The delivery terms are FCA. Format: 45 x 150 mm Equipment: Double head paper driller Drill distance 45 - 150 mm Space behind drill heads 100 mm Psdpfjwvuubjx Abhspu Operation Lever operated, single phase 240 Volts

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1000042683, feed length Y-axis: 1,300 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 63 A, total width: 1,950 mm, total length: 1,950 mm, total height: 3,100 mm, The Brema Vektor 15 is a CNC machining center with a vertical column, designed for processing wood-based panels. The machine can perform drilling, milling, and engraving using a pantograph. It allows for machining on all 4 edges of the panel and profiling thanks to its patented panel transportation system. The machine is equipped with: - A head with independent vertical spindles: 21 (7 on X + 14 on Y) - Horizontal spindles (2L + 2R on X) Ppjdsx Hfh Tspfx Abhou - Main vertical spindle (milling unit) 7.5kW - Automatic revolver-type tool change system, 10 positions Available revolver units: 1. Saw on X 2. Saw on Y 3. Drilling on Y (1R + 1L) 4. Hinge drilling (1x35mm + 2x5mm) 5. Milling 6. Milling 7. Milling

Condition: excellent (used), Inline drilling machine Manufacturer: Ixion Type: 3 R 15 3 consisting of a tapping machine BT15GL Psdpfx Aezdp U Nsbhjpu Tapping capacity up to M16 8 tapping chucks Pitch: 0.4 - 0.5 - 0.7 - 0.8 - 1 - 1.25 - 1.5 - 1.75 Drilling machine BT 15 P MK2 10 speeds, 240 - 3800 rpm and drilling machine BT 15 5 speeds, 480 - 3800 rpm Length: 980 mm Width: 660 mm Height: 1600 mm Weight: 420 kg

Condition: good (used), Year of construction: 1998, working area 3 - 50 mm lip angle 40-180 ° drill diameter 3-50 mm weight of the machine ca. 0,18 t dimensions of the machine ca. LBH 0.9 x 1,0 x 1,40 m Incl. workpiece head for switchable 1:1 / 1:2 ratio Incl. special web-thinning attachment for split-point grinding Ppsdpjzczhgofx Abhsu Incl. 6-jaw chuck Incl. work light Incl. operating manual

Condition: excellent (used), Year of construction: 2019, drilling depth: 3,000 mm, total length: 11,500 mm, total width: 4,300 mm, total height: 2,350 mm, rotational speed (max.): 1,800 rpm, spindle motor power: 44,000 W, Deep hole drilling machine Tacchi - FT 350 x 3000 MACH-ID 9650 Make: Tacchi Type: FT 350 x 3000 Control: SIEMENS 840D Year: 2019 Ppodezdq Ecjpfx Abhju High precision accuarcy ( two step proces) 1e step  cutting using skiving knives 2 step cold-form rollers for highest surface toleraces For Superfinishing Hydraulic and Pneumatic Cylinders / Rods ECOROL Boring heads in diameter: 40/50/63/80/90/100 mm Maximum out side diameter 250 mm Swing over bed 700 Center height 350 mm Drilling carriage Rapid feed rate both directions 6000 mm/Min Max. Drilling thrust 35000 N Feeder carriage Rapid movement 5000 mm/Min Thrust against workpiece 35.000 N Hydraulic approach stroke 150 mm Max. drill Ø steel:200mm Spindle bore: 85mm Drilling depth: 3000mm Power on spindle: 44kW Speeds / ranges: 1800Rpm Length: 11500mm Width: 4300mm Height: 2350mm Weight: 14450kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, High-speed radial drilling machine Alzrapid 32 Podszhbl Uopfx Abhopu With MK4 tool holder Quill feed, Thread cutting device, Operating manual.

Condition: good (used), 1 used twist drill grinding machine Ppedpfx Absyl Idaeheu Manufacturer: Darex Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Speed: 2850 rpm Grinding type: Conical surface, cross grinding Point angle: 118°–150°, steplessly adjustable Grinding range: 3–21 mm Dimensions (W x D x H): 410 x 410 x 260 mm Weight: 25 kg Equipped with: Grinding attachment and cross table for grinding countersinks

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° Podpfemnntmsx Abhepu - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 Ppedpfjwxy Dgex Abhsu - Punching force: 50 tons - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - with support table

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Ppodpfx Abetzctmjhsu Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: new, 18 mm M 12 M 14 MK 2 225-4.300 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm Ppodpeyv Nddofx Abhou 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel total power requirement 0,37/0,55 kW Machine height 840 mm weight 120 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection Option 12 - LED machine light, with radially adjustable light beam, power rating 230 V, protection class IP 65

Condition: excellent (used), functionality: fully functional, Drilling machines for turned parts TRIADE FR3 Pedpfxsx Ty Uhs Abhspu

Condition: excellent (used), Drilling machines for turned parts TRIADE FR5 Podpfx Aex Tupyobhepu

Condition: excellent (used), Drilling machine for turned components Triade Number of drilling units: 3 Drilling depth: 100 mm per side Pjdpfx Asyabz Isbhjpu

Condition: excellent (used), MECOF AGILE CS 500 TNC 640 Boring Mill in technically flawless condition Technical Data: - Spindle taper: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm - Table size: 7300×1090 + (2 CUBI 1520×1000) mm - Spindle speed: 4000 rpm - CNC model: fidia CXR - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining at various angles. The table has a size of 7300×1090 mm and is supplemented by two additional cubes measuring 1520×1000 mm each. In this case, the machine has been installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor with a maximum spindle speed of 4000 rpm. The fidia CXR CNC control provides precise programming and easy operation. The tool changer with 10 positions (5 ISO 50 – 5 HSK 50 E) allows for fast tool changes to optimize your production process. Pedpjy Rzkljfx Abhepu The machine has been regularly serviced and is in technically excellent condition. It can be inspected under power or during ongoing production. Extensive accessories included. Additional pictures available. Dismantling, removal, shipping, and reinstallation can be organized upon request.