Used Wmw Rw 1 for sale (78,234)

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Kedpfxovy E A Se Accsdl

Condition: used, Year of construction: 1965, There are two WMW SU 315x3000 available, connected load machine 1/ 2: 12.6/ 12kW, weight machine 1/ 2: 8.2/ 9t, machines need overhauling. Kedpsxg Ihgjfx Accsdl

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm Kjdpfx Aeb A Iccsccsdl -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Kodewbt Uqepfx Accedl Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Kdsdpfxswndnuj Accol Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, The machine tool undergone a general overhaul, which included the repair of the mechanical part, the electrical part and the derivation of the geometry in accordance with the Technical Acceptance Conditions (WOT) and EN. The machine is adapted to the minimum requirements for occupational health and safety requirements. Basic technical data: table working area: 400x1600 mm spindle taper: ISO 50 longitudinal travel: manual/mechanical 1150/1120 mm cross travel: manual/mechanical 370/345 mm vertical travel: manual/mechanical 430/400 mm maximum angle of rotation of the vertical head: +/- 45 stopni spindle speed range: the smallest 28 rpm, the largest 1400 rpm main motor: 11 kW Kdsdpjurvl Rsfx Accel The milling machine has a mechanical tool clamp that allows the operator to automatically clamp the tools in the machine. The machine has been equipped with a central lubrication system and optical rulers (optical scales) for digital reading of the position in 3 axes. Machine is ready for inspection in central Poland.

Condition: good (used), Offer 26013 Technical data: - Length approx. 1500 mm - Width approx. 1000 mm - Thickness of top plate approx. 50 mm - Plate thickness incl. ribbing approx. 200 mm - Table height approx. 870 / 900 mm Kdedpjyi Ahnefx Accel - Table frame/base - Total weight approx. 550 kg

Condition: used, Year of construction: 1978, x-travel 820/850 mm y-travel 300/330 mm Kdjdpfx Asxxb Hteccol z-travel 485/505 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1670 x 1620 x 2500 m Further techniscal detals please consider pictures

Year of construction: 1988, condition: used, tool adaptor SK 40 weight 165 kg Type Uni. 0 Ksdeipyx Eepfx Accedl Universal type milling head with SK 40 spindle of a milling machine Heckert FU 315.

Condition: new, Year of construction: 2026, The system can be loaded onto a truck with a forklift and is ready for operation in just a few simple steps. Kedpefrugkofx Accodl A 16A socket is required. Total dimensions of the system LxWxH 3.5 x 1.06 x 2.98m (ready for operation) Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm-30mm, (bigger particles are possible with a special design)

Condition: good (used), Machine number: 2082 Type / Model: F315 Control: conventional travel x-y-z: 820 x 300 x 440 mm table: 1250 x 335 mm table clamping area: 1100 x 225 mm speed range: 56 to 2800 rpm spindle mounting: SK 40 Feed rate: 10 to 630 m/min rapid traverse: Connection: 6 kW Accessories/equipment: Kdsdpfx Acoh Rawfecjl Condition: good weight: 2 t dimensions: 1700 x 2000 x 1900 mm

Year of construction: 1983, condition: good (used), Machine number: 316204/22 Type / Model: FSS 315/E Travel x-y-z: 850 - 280 - 355 mm table: 1.200 x 370 mm clamping surface: 1.060 x 260 mm Kdedpfxjfli Afo Accel Speed range: 28 to 1,400 rpm spindle mount: SK 50 quill stroke: 80 mm Feed rates x and y axis 16 to 800 mm/min feed z-axis: 5 to 250 mm/min Connection: 8 kW Accessories/equipment: Swivel head; condition: good Weight: 4 t Dimensions: 2.000 x 2.000 x 2.400 mm

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 160 S1M - Pressing force: 1600 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s Kdodpfxoycl Hgj Accjl - Draw cushion selectable: 630 kN, stroke: 200 mm - Drive: 17 kW - Dimensions: 3500 x 2000 x 1200 mm - new control system, new switch cabinet, light curtain (1-stroke, 2-stroke, safety), new hydraulics, - new seals, paint finish as requested - new UVV safety inspection

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with drawing cushion Ksdpfx Ajycl Evsccedl - Pressing force: 2500 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Drawing cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm - new control system, new control cabinet, light curtain (single stroke, double stroke, safety), new hydraulics, - new seals - new UVV safety inspection

Condition: used, functionality: fully functional, Hydraulic Press VEB Zeulenroda PYE10N Used condition as shown in the pictures Kedpfx Acow S Uccecedl All data can be found in the photo of the nameplate.

Condition: good (used), TGL: 28561/01 Table number: 14167 diameter: 315 mm Kdsdsmikdhepfx Accol footprint: 380 x 600 mm Height: 150 mm Accessories/equipment: graduation on table 360°, rotatable Condition: good weight: 75 kg dimensions: 600 x 600 x 320 mm dimensions with frame: 700 x 700 x 1.500 mm

Year of construction: 1966, condition: good (used), Machine number: 6665/66 TyP / Model: PEDV 10/II-S Pressing force: 10 t table: 450 x 300 mm Kodpfx Ajh Tktioccsdl ram: 190 x 140 mm ram stroke: 6 to 50 mm ram adjustment downwards: 45 mm table adjustment upwards: 140 mm drop-through hole: 140 mm throat: 170 mm distance table ram max.: 320 mm stroke rate: 160 /min sheet thickness single stroke: 2 mm sheet thickness continuous stroke: 1 mm power supply: 1,2 kW Accessories/equipment: Condition: good weight: 1,0 t dimensions: 900 x 850 x 2.200 mm

Year of construction: 1986, condition: good (used), Radial drilling machine WMW Heckert from liquidation Model BR 40/2x1250 Year of manufacture 1986 MK 5 recording Pinol stroke 355mm Throat 300-1250mm Speeds from 20-1200 rpm infinitely variable 3 gears-- pole-changing engine-- Rev counter Thread cutting function automatic feed 0,063---0,1--0,16--0,25--0,4--0,63 Coolant pump Work light distance spindle - base plate 280-1380mm motor-driven height-adjustment electrical clamping with clamping cube Kjdofnh T Tepfx Accedl 3,5 Kw Engine power Weight 3to. Space requirement approx. 2760x2030x900

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Kjdov Hckgepfx Accedl Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Kdodpfx Asxnpf Nsccsl Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Kodpfjgy E Dpjx Accjdl Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: used, Horizontal Gear Hobbing Machine WMW MODUL ZFWZ 1250/3 Kdsdpfxjwxxxce Accel Year of manufacture: 1982 Control: conventional Country of origin: Germany Max. gear diameter: 1250 mm Gear width: 600 mm Module – max.: 16 Module – min.: 2 Cutter diameter: 240 x 280 mm Table clamping surface: 1020 mm Speed range: 28 – 200 rpm Axial feeds: 0.28 – 8 mm/min Radial feeds: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Swivel range of milling slide - L/R: +/- 45° Rapid traverse motor: 12.5 kW Voltage: 380 V Frequency: 50 Hz Total power requirement: 5/19.5 kW

Condition: used, table diameter 315 mm workpiece weight 50 kg centre height mm weight of the machine ca. 60 Kg Kodpfx Acot Dqu Decsdl dimensions of the machine ca. 0,4 x 0,4 x 0,2 m vertical rotary table, Height from assembly space to centre of disk = 500 mm

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Kdodpfx Acovcrmpocsl Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW Kjdpexddqrsfx Accodl weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device