Used Plantec Bc 450 Ha for sale (16,238)

Condition: new, Year of construction: 2026, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Large mitre range from -22.5° to +45°, Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions Itsdjpa Nxaspfx Aqpeg at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Isdjfgyicopfx Aqpjtg Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material Isdpfxopa Nxde Aqpotg For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Itsdpfsidun Dox Aqpog Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid materials are possible to a limited extent). The machine stands out for its ease of use, rapid and convenient material change, and simple adjustment of mitre angles. The UK 352 HA features a steplessly adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the push of a button, while material clamping is handled by two pneumatically operated vertical clamping cylinders. The machine comes standard with a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction unit are provided on this model. Iodogwt Rrspfx Aqpstg Equipment: • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right -45º degrees • Includes 2 pneumatic vices (vertical) • Steplessly adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction connection for chip extraction unit • Mist spray device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically positioned control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us for an appointment. We look forward to your enquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw Itodpfxegwt Rns Aqpog • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel Itedsgwt Ryspfx Aqpog • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2026, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Iedogcbwgepfx Aqpetg

Condition: new, Year of construction: 2026, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel Itedpfxogwt R Ds Aqpsg • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Itjdpsidun Ijfx Aqpsg Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Isdpfxegwt Rve Aqpetg

Condition: new, Year of construction: 2026, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw Ijdegwt S Eopfx Aqpotg • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: reconditioned (used), VK 450 The debarker has been completely refurbished Itjdpfsq Hr N Ijx Aqpjg

Condition: new, Year of construction: 2026, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Itodpfjukgiqjx Aqpog Easily removable chip collection trays Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, mileage: 3,64,503 km, power: 331 kW (450.03 HP), first registration: 02/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,615 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Scania G450 + Dinkel trailer / grain tipper / discharge chute Itjdpfx Aqsyvw Anopjg

Condition: used, mileage: 3,64,503 km, power: 331 kW (450.03 HP), first registration: 02/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,615 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Scania G450 + Dinkel trailer / grain tipper / sluice Isdpfxjyvmvdj Aqpotg

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm Itsdjy Dc U Espfx Aqpog 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: used, mileage: 6,06,024 km, power: 330 kW (448.67 HP), first registration: 11/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 51 m³, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, Equipment: ABS, air conditioning, parking heater, * Sun visor * ABS * TCS Traction Control System * ESP * Adaptive cruise control * Active Brake Assist * Lane keeping assist * Right turn assist * Radio * On-board computer * Stationary air conditioning * Auxiliary heater * Cruise control * Hill start assist * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Driver comfort seat * Seat heating Itodey E A A Eopfx Aqpjg * Refrigerator box * Rear axle differential lock * Lift axle * Air dryer * Towing hitch * Tandem towing hitch * Duomatic air connection * Foldable underride guard * 12-speed * Suspension: leaf/air * Payload: 14,165 kg * Continuous brake: engine brake ---Body: Platform, sliding tarpaulin left & right, Edscha sliding roof, hardwood floor, lashing rails, rear portal doors, load securing certificate--- Tandem towing hitch as low coupling. The following must also be purchased: Krone ZZ18XFO, first registration 11/16, body dimensions: 8,200 x 2,480 x 2,850 mm, ABS, BPW axle, disc brakes, front & rear distance. Price 4,900.-- EUR net Sale only to commercial buyers. IN CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see our legal notice) apply to all sales contracts, invoices, proforma invoices, orders, and sales discussions.

Condition: used, mileage: 6,06,024 km, power: 330 kW (448.67 HP), first registration: 11/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 51 m³, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, Equipment: ABS, air conditioning, parking heater, * Sun visor * ABS * TCS Traction Control System * ESP * Adaptive cruise control * Active Brake Assist * Lane departure warning system * Right-side turn assist * Radio * On-board computer * Stationary air conditioning * Auxiliary heater * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Heated mirrors * Central locking * Fog lights * Driver comfort seat * Seat heating * Cool box * Rear axle differential lock * Lift axle * Air dryer * Trailer hitch * Tandem trailer hitch * Duomatic air coupling * Folding underrun protection * 12-speed * Suspension: leaf/air * Payload: 14,165 kg * Constant brake: engine brake Ijdpfxey E A A Sj Aqpotg ----Body: Flatbed, sliding tarp left & right, Edscha sliding roof, hardwood floor, lashing rails, portal doors, load securing certificate----Tandem trailer hitch as low coupling. Additionally available: Krone ZZ18XFO, first registration: 11/16, body dimensions: 8200x2480x2850 mm, ABS, BPW axle, disc brakes, spacing front & rear. Price: €4,900 net. Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. All purchase agreements, invoices, pro forma invoices, orders, and sales discussions are based on our General Terms and Conditions (see legal notice).

Condition: ready for operation (used), Year of construction: 2007, overall weight: 1,550 kg, cutting speed: 28,00,000 mm/min, Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details. • Blade diameter: 450 mm • Blade bore: 32 mm • Cutting capability: double miter (left and right) Iodpoyhfm Dsfx Aqpjtg • Build: heavy-duty, solid construction for high stability and precise results • Condition (as stated by owner): low operating hours; regularly serviced; maintained in excellent condition • Application: suitable for workshops, assembly lines, and heavy-duty industrial environments

Condition: used, Year of construction: 1991, Operating weight: 450 kg ID: Dynapac LG 450 Bj. 1991 Hatz engine ES 78 Operating weight 450 Kg With crank A vibrating plate Dynapac LG 450 is for sale Fully functional You can find more from our range under Non-binding offer, sale only to traders, errors and prior sale reserved Advertisements and company logos on vehicles may possibly be digitally reproduced on photos Itedsv Huiuopfx Aqpjg

Condition: used, mileage: 62,506 km, power: 117 kW (159.08 HP), first registration: 09/1971, fuel type: diesel, empty load weight: 8,020 kg, maximum load weight: 3,580 kg, overall weight: 11,600 kg, tire size: 8,25-20 PR 12, axle configuration: 4x2, wheelbase: 4,200 mm, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 6, total length: 2,450 mm, total width: 2,650 mm, Vehicle location: Bovenden, switch 5, rotating beacon, leaf suspension Wheelbase: 4200 mm Superstructure: Gebr. Bachert TRO-TLF16 approx. 2000 ltr. 6-cylinder fire-fighting vehicle, a Bachert FP16/8 centrifugal fire-fighting pump with a water delivery rate of 1600 l/min at 80 mWS total delivery head is installed in the rear of the vehicle. With H-approval. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iodpfxevhhgpo Aqpjtg - .

Year of construction: 2011, condition: used, Mileage: 227.446 km Field of application: Freight transport Power: 331 kW (450 HP) GVW: 26.000 kg Iodpfx Aqsx R T A Topotg Please contact Emal Jaweed for more information

Condition: used, mileage: 2,65,705 km, power: 330 kW (448.67 HP), first registration: 01/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2026, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, * Front accident damage * Air conditioning * Cruise control * Multifunction steering wheel * Sleeper bunk * Storage compartments * Kenwood radio * Lane departure warning * Hill start assist * Differential lock ----Internal vehicle number: 11402-----Errors & intermediate sale excepted WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp German, English -- WhatsApp German, English, Arabic Iedjxq Nc Hspfx Aqpstg

Condition: excellent (used), Year of construction: 2008, 1. Gas burner WEISHAUPT G11/1-D – 5,450 kW, with control cabinet, control unit with gas train. Output: 900–5,450 kW Design: ZMD Year of manufacture: 2008 2. Iodpfxewg Hg Re Aqpetg Gas burner WEISHAUPT G11/1-D – 4,750 kW, with control cabinet, control unit with gas train. Output: 900–4,750 kW Design: ZMD Year of manufacture: 2004