Used Wlo 4 35 Kw for sale (80,976)

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Fsdoixupuopfx Anzsph Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Year of construction: 2024, condition: new, Technical data of the furnace Fedpfx Aopm Ex Hjnzeph nominal heat output: 30,00 kW maximum heat output: 35,00 kW / approx. 400 m2 complete with: axial fan with speed: 1380 rpm and capacity: 4650 m3/h complete with: blower control unit SCL-1515 innovative design of the air jacket that completely surrounds the combustion chamber for maximum efficiency indestructible firebox, made entirely of certified boiler plate p265gh and 16M06 #6mm thick Large flue that reduces fuel consumption by up to 30%. Energy efficiency class: A energy efficiency index: 110 net weight: 260 kg gross weight: 290 kg Grille: 1000 x 250 mm coating with certified heat-resistant paint, which protects against corrosion and gives an aesthetic appearance solid construction powerful combustion chamber 100 x 55cm! large loading door instruction manual efficiency: 72,00% CO emission at 13% O2: 1.20m Fuel type: recommended seasoned hardwood with moisture content ≤20%* mg/Nm3, briquettes, coal only up to 10%. Dimensions: External dimensions: overall width: 650mm x overall depth: 1350mm x overall height: 920mm. dimensions of the fireplace: width: 550mm x length: 1000mm x height: 450mm Dimensions of the upper door (3 and 4 mm sheet metal): Width: 410mm x Height: 340mm Dimensions of the lower door (3 and 4 mm sheet metal): Width: 410 mm x Height: 150mm Dimensions of the upper loading opening: width: 320mm x height: 320mm Dimensions of the lower opening: width: 320 mm x height: 130 mm dimensions of the grille: width: 250mm x depth: 1000mm Diameter of the hot air outlet: Ø 150mm diameter of the exhaust outlet: Ø 150mm Height of the feet: 140 mm

Year of construction: 2024, condition: used, We are selling our workshop heater, which we have been using for about 1.5 years. The oven comes with a chimney pipe, as well as approximately 20 meters of ducting for warm air distribution. The unit is in good condition. Please note: collection and disassembly by the buyer only. If interested, please get in touch — we look forward to hearing from you! Technical specifications for the heater are as follows: — Nominal heat output: 30.00 kW — Maximum heat output: 35.00 kW / approx. 400 m² — Supplied with axial fan: Speed 1380 rpm, air flow: 4650 m³/h — Supplied with SCL-1515 fan control unit — Innovative air jacket design completely surrounding the combustion chamber for maximum efficiency — Durable combustion chamber, made entirely of certified boiler plate steel (16M06 #6mm thick) — Large flue which reduces fuel consumption by up to 30% — Energy efficiency class: A — Energy efficiency index: 110 — Net weight: 260 kg — Gross weight: 290 kg — Grate: 1000 x 250 mm — Coated with certified heat-resistant paint for corrosion protection and attractive appearance — Solid construction — High-performance combustion chamber (100 x 55 cm) — Large loading door — User manual included Fsdpexgf Scofx Anzsph — Efficiency: 72.00% — CO emission at 13% O₂: 1.20 m — Recommended fuel: seasoned hardwood with moisture content ≤20%* mg/Nm³, briquettes, coal (up to 10%) Dimensions: — External dimensions (W x D x H): 650 mm x 1350 mm x 920 mm — Firebox dimensions (W x L x H): 550 mm x 1000 mm x 450 mm — Upper door (3 and 4 mm steel plate): 410 mm x 340 mm — Lower door (3 and 4 mm steel plate): 410 mm x 150 mm — Upper loading aperture: 320 mm x 320 mm — Lower opening: 320 mm x 130 mm — Grate: Width 250 mm x Depth 1000 mm — Hot air outlet diameter: Ø 150 mm — Flue gas outlet diameter: Ø 150 mm — Leg height: 140 mm

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights Fpjdpevu Hrkofx Anzoh inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Year of construction: 2023, condition: new, WLO 45 KW Hot air stove ,wood stove,Heating Thanks to the powerful combustion chamber, the stove can burn up to Pick up 120 cm long pieces of wood! Furnace parameters Nominal heating output: 49,5 kW approx. 450 m2 including: axial fan with speed: 1380 rpm and output: 5500 m3/h Included in delivery: Controller to regulate the operation of the SCL-1515 fan innovative design of the air jacket that completely surrounds the cooker for maximum efficiency Indestructible range cooker made entirely of certified boiler plate p265gh and 16M06, thickness #6mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 320 kg Gross weight: 340 kg Grid: 1000 x 250 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look solid construction huge combustion chamber 120 x 80cm! large loading door User Guide Yield: 75.00% CO emission at 13% O2: 1.20 m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20%* mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / affixed to the rating plate Compliance with standard: EN13240:2006 BimSchV level 2: Yes Fodpfx Anjixuq Dszeph Dimensions External Dimensions: Overall Width: 800mm x Overall Depth: 1600mm x Overall Height: 1200mm Cooker dimensions: Width: 800mm x Length: 1200mm x Height: 800mm Upper door dimensions (3 & 4mm sheet metal): Width: 520mm x Height: 470mm Bottom door dimensions (3 & 4mm sheet metal): Width: 360mm x Height: 150mm Top Loading Port Dimensions: Width: 460mm x Height: 460mm Bottom opening dimensions: Width: 360mm x Height: 130mm Grate Dimensions: Width: 250mm x Depth: 1000mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 200mm Foot height: 140 mm

Condition: new, I offer a new worm gear motor from the renowned German company MSF-Vathauer Antriebstechnik GmbH & Co. KG. This device is designed for industrial applications, automation, conveyors, feeders, and various types of production machines. Technical data: • Manufacturer: MSF-Vathauer Antriebstechnik GmbH & Co. KG • Motor type: KAE63B-4 • Gearbox: worm gear • Power: 0.18 kW • Voltage: 230/400 V • Frequency: 50 Hz • Rotational speed: 1360 rpm • Protection class: IP55 • Insulation class: F • Operating mode: S1 (continuous operation) • Power factor cos φ: 0.70 • Weight: approx. 8 kg • Robust aluminum worm gear Included: Fpodpfxezbdduo Anzoh • MSF-Vathauer KAE63B-4 worm gear motor • Manufacturer's operating manual • Mounting elements as shown in the pictures • Original shipping protection Applications: • Conveyors and transport systems • Production lines • Packaging machines • Feeders and dispensers • Industrial automation • Technological drives Condition: • New, in-stock item • Never used

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Fjdpfxeywpahe Anzeph Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Fpjdpfxjxbfute Anzsh

Condition: new, GMN HSP150DH 381 12 kW 350Hz 7000rpm 400V - Mapal HF spindle / high-frequency spindle HF LBD SN: 378201, unused in opened original packaging, 100% functional. Delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Fpsdpfxjx Dwp Io Anzoh

Condition: new, GMN HSP150DH 381 12 kW 350Hz 7000rpm 400V - Mapal HF spindle / high-frequency spindle HD LBC, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and transport! Fpsdpfoy Nqagjx Anzsh

Condition: new, GMN HF Spindle HSP150DH 381 12 kW 350Hz 7000 rpm 400V - Mapal SN: 378199, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Fodpfx Anoy Np Upjzsph

Condition: new, GMN HF-Spindle HSP150DH 381 12 kW 350Hz 7000rpm 400V - Mapal SN: 378200, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packaging and shipping! Fpjdpfey Np Uvox Anzsh

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) Fpodpoydv I Defx Anzjh • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: used, mileage: 84,675 km, power: 104 kW (141.40 HP), first registration: 11/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: diesel, CO₂ emissions: 295 g/km, fuel tank capacity: 75 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, loading space length: 3,650 mm, loading space width: 2,130 mm, loading space height: 2,220 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, start-stop system, tail-lift, traction control, = Additional Options and Accessories = - Automatic low beam headlights - Heated exterior mirrors - Passenger airbag - Passenger bench seat (3SJ) - Electric front windows - Euro 6 emission standard - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Comfort seats - Cornering lights - Lumbar support - Front center armrest - Fog lights - Radio - Radio with DAB - Rain sensor - Immobilizer - System for preventing secondary collisions - Insulated glass - Windshield heating = Additional Information = General Information Number of doors: 2 Model range: Sept. 2022 - Aug. 2024 Cab: single Technical Information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Maximum speed: 149 km/h Fpjdpjza E Irofx Anzoh Dimensions Length/Height: L3 Weights Unladen weight: 2,542 kg Payload: 958 kg GVWR: 3,500 kg Functional Tail lift: Dhollandia DHLM.08, tailgate, 750 kg Interior Interior: black Consumption Average fuel consumption: 7.1 l/100km Fuel consumption in urban areas: 8.1 l/100km Fuel consumption in non-urban areas: 6.6 l/100km Maintenance, History and Condition Number of owners: 3 APK (Technical Inspection): valid until 06.2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 4,71,000 km, power: 350 kW (475.87 HP), first registration: 04/2015, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater, * Our internal number: 1004 * S 517 HD * First registration: 04/2015 * Clean vehicle * 350 kW / EURO 6 (big engine) * INFO: Currently: 57 seats -> according to vehicle documents, can be expanded to 61 seats in total. * ..... * NEW TACHOGRAPH – Generation 4.1 installation scheduled for August 2025 * Extract from the repair history: * TOTAL COST EVOBUS invoices: approx. EUR 27,000 * ..... * Retarder newly installed in August 2024 with control unit * Adaptive cruise control replaced in 10/24, serviced at Evobus workshop * All V-belts / idler pulleys / flat belts / tensioners, etc. replaced in 08/2024 * Oil change / air filter / diesel filter all NEW in 08/2024 * 8 brand-new tyres – ALL tyres replaced in August 2024, front axle with Conti * Air conditioning check in 08/2024 * MB workshop inspection in September 2024 * Steering column switch replaced in 09/24 * Retarder * Cruise control * Adaptive cruise control * Air conditioning system * Auxiliary heater * Tinted glazing * Toilet * 55+1+1 touring seats fitted (expandable to 59+1+1 seats as per vehicle documents) * Seats adjustable rearwards and sideways * Front matrix display with control unit * Alloy wheels * Reversing camera * ... * Vehicle registered and in operation * Mileage and condition may vary * All information subject to change Fodpfxowxkh Ao Anzjph * We reserve the right of prior sale * Please refer to our Terms & Conditions

Condition: like new (used), Year of construction: 2015, nominal power: 1,300 kW (1,767.51 HP), rotational speed (min.): 1,493 rpm, rotational speed (max.): 1,493 rpm, input voltage: 6,000 V, input frequency: 50 Hz, overall weight: 6,100 kg, 1 asynchronous electric motor Manufacturer: Reform Elektromotorenbau GmbH Type: Y2-500-4 Power: 1300 kW Speed: 1493 rpm Voltage: 6000 volts Current: 151.4 A cos Φ: 0.86 Insulation class: F Fpsdpfx Ansv I Alyezoh Frequency: 50 Hz Protection class: IP55 Design: Foot (B3) Operating mode: S1 continuous operation Weight: 6100 kg Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air Shaft height: 500 mm

Condition: ready for operation (used), Foot-mounted motor RÜETSCHI Switzerland 54 kW / 60 Hz / 3552 rpm Shaft 65 x 150 mm Fsdpfx Anjq H Rvvezoph Weight 375 kg

Condition: used, mileage: 74,854 km, power: 121 kW (164.51 HP), first registration: 12/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,490 mm, fuel: diesel, fuel tank capacity: 75 l, color: white, gearing type: automatic, number of gears: 8, emission class: euro6, number of seats: 3, loading space length: 4,380 mm, loading space width: 2,160 mm, loading space height: 2,450 mm, Year of construction: 2024, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, onboard computer, power assisted steering, power mirror, seat heater, start-stop system, = Additional Options and Equipment = Fedpfx Asy D Aazsnzjph - Automatic dipped headlights - Heated exterior mirrors - Front electric windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Height-adjustable driver’s seat - Height-adjustable steering wheel - Collision mitigation braking - Comfort seats - Lumbar support - Front centre armrest - Multifunction steering wheel - Multimedia capable - Radio - Radio with DAB - Seat heating - Immobilizer - Post-collision safety system - Cross-traffic alert = Additional Information = General Information Number of doors: 2 Model range: June 2022 - 2026 Cab: single Technical Information Torque: 410 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Dimensions Length/height: L4 Weights Unladen weight: 2,527 kg Payload: 973 kg Gross vehicle weight: 3,500 kg Interior Interior: black Maintenance, History and Condition Number of owners: 1 MOT (Roadworthiness test): valid until 12/2027 Number of keys: 3 (3 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: new, Year of construction: 2022, cooling capacity: 106.2 kW (144.39 HP), overall weight: 1,780 kg, warranty duration: 6 months, total height: 2,410 mm, total length: 6,100 mm, total width: 2,250 mm, Rooftop Air Conditioner CLIMAVENETA WSM2-T 0354 106.2 kW Cooling capacity: 106.2 kW / 30.2 tons Year of manufacture: 2022 Options: Air filter, Wika air flow sensor, 2 pcs. Belimo damper actuators. Refrigerant circuit: 2 pcs. Heat exchanger: Copper / Aluminum Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland scroll ZP104KCE-TFD-477 (scroll) Number of fans: 2 pcs. + 4 pcs. (centrifugal, EC-fans) Type of refrigerant: R410A Dimensions: 6.1 х 2.25 х 2.41 m Weight: 1780 kg Fpodpox Eh S Aefx Anzjh Working hours: 0/0/0/0 h. Condition: Outlet, New

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, Fpjderanngjpfx Anzoh -Manufacturer: Orsta, Hydraulic unit -Motor: VEM 7.5 kW / 1430 rpm -Individual components: Hydac Hawe Hoerbiger see photos -Dimensions: 860/320/H420 mm -Weight: 97 kg

Condition: new, * IMMEDIATELY AVAILABLE * Includes pendulum tailgate / Tridem / Double hydraulics / Steel side panels TECHNICAL DATA • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 400 x 200 x 30 cm • External dimensions (LxWxH): 530 x 211 x 102 cm • Platform height: 71 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 1,200 kg • Payload: 2,300 kg • Chassis: High loader (wheels under body) • Tyres: 195/60R12C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side panels • Click & Clamp: The new "Click & Clamp" system for maximum strength and rapid addition/removal of various optional side panels and accessories Fsdpfex Tcfijx Anzoph • Automatically adjustable stanchions and clamped side panels ensure smooth travel without unwanted rattling • Robust built-in latches on all side panels • All side panels foldable and removable • Removable steel corner stanchions • Socket mounts on all 4 corners for tarp frames, mesh extensions, side panel extensions, or front panel extensions • Welded-on net hooks under the platform • Sturdy, rattle-free tension latches on side panels • Galvanized steel sheet on multiplex flooring • Reinforced, solidly bolted V-drawbar • Very robust welded steel frame • Frame completely hot-dip galvanized • Multiple cross members for high point load capacity • Additional continuously welded longitudinal beams • 8 recessed lashing points inside the floor (1000DaN/kg), TÜV certified! Covered with spring steel plates beneath • Swinging rear tailgate on hot-dip galvanized steel • U-profile at rear for easy ramp attachment • Integrated ramp slots for optional loading ramps • Twin heavy-duty 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Detachable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charge: Battery is charged via the vehicle's ignition when the engine is running (depends on towing vehicle) • Battery charge status display • Battery master switch • Maintenance support bar under the platform for service work • ALKO rubber suspension axles • Automatic reversing mechanism • ALKO overrun device and parking brake • Cast steel coupling head with integrated ALKO high-security lock • Tool/storage box mounted on the drawbar • Spare wheel at the rear of the trailer • 13-pin connector • Reversing lights • Complete LED lighting: Extremely bright, durable, and reliable • Dynamic LED indicators • Integrated rear fog light • Various marker lights front, side, and rear • Rear frame lighting recessed • Heavy-duty jockey wheel • 5-year chassis warranty Additional accessories can be retrofitted – please enquire! New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance, or export plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg - Errors, omissions, and prior sale excepted -

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: PNG2 3201HE - 2200xxxxxx, cooling capacity: 354 kW (481.31 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,765 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 60.4 m³/h, pump pressure: 3.18 bar, total width: 2,190 mm, total length: 3,465 mm, total height: 2,425 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller Type: Phönix PNG2 3201 HE Manufacturer: MTA S.p.A. The Phönix PNG2 3201 HE are compact water chillers suitable for outdoor installation. The unit is Eurovent certified. Equipment: - HE version, xDRIVE controller - Operating ambient temperature down to -20°C, EC brushless fans - Buffer tank and P3 pump - Compressor inlet/outlet valves - Filters at condenser coils - NO microchannels Cooling capacity (kW): 354 Chilled water temperature out/in (°C): 7 / 12 Flow rate (m³/h): 60.4 Available pump head (bar): 3.18 Ambient temperature (°C): 35 Refrigeration circuit: Refrigerant R513A, GWP 631, safety classification A1 Number of circuits: 1 Number of compressors: 1 Capacity control (%): infinitely variable from 25 to 100 Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 170 Max. current (A): 277 Starting current circuit (A): 453 Protection class: IP54 Dimensions: Length (mm): 3465, Width (mm): 2190, Height (mm): 2425 Weight (kg): 3767 Connection: Victaulic DN 100 Serial no.: 2200xxxxx Year of manufacture: 2022 Condition: Visually excellent, technically ok Stock item, new Fpsdpfx Ajxay H Ujnzjh Price: on request in EUR (plus VAT, ex works MTA Italy) – 12-month warranty (Subject to technical changes and prior sale!) Location: MTA, Tribano

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: GLT135SHE -2200333157, cooling capacity: 354 kW (481.31 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,428 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 60.7 m³/h, pump pressure: 2.51 bar, total width: 2,190 mm, total length: 4,530 mm, total height: 2,425 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller, Type: Galaxy GLT 135 SHE Manufacturer: MTA S.p.A. The Galaxy GLT 135 SHE units are compact air-cooled chillers designed for outdoor installation (operational from -20°C to +43°C). Features include a plate evaporator, scroll compressors, control and switch cabinet, compressor shut-off valves, equipment suitable for low ambient temperatures down to -20°C (EC fans), P2 pump, 510-liter buffer tank, electric frost protection heater, condenser filter mats including Victaulic couplings. Cooling capacity (kW): 354 Chilled water temperature out/in (°C): 7 / 12 Flow rate (m³/h): 60.7 Available pump pressure (bar): 2.51 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Capacity steps (%): 0-17-33-50-67-83-100 Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 167.7 Max. current (A): 273.3 Starting current per circuit (A): 421.8 Protection class: IP54 Dimensions: Fpsdpfxjxqnydj Anzoh Length (mm): 4530, Width (mm): 2190, Height (mm): 2425 Weight (kg): 4428 Connection: Victaulic DN 125 Serial number: 2200333157 Year of manufacture: 2018 Condition: Cosmetically: 2, Technically: OK & tested Used Price: on request in EUR (plus VAT, ex works Nettetal) – 3 months warranty MTA offers, upon request, a functional test of the chiller together with the buyer prior to collection at the Nettetal branch. Used machines may have visual imperfections due to previous use. (Subject to technical changes and prior sale!)

Condition: used, Used stainless steel three decks tumbling screen by GKM Siebtechnik GmbH (Germany) model KTS 2000/3. Decks and contact parts are made of AISI 304 (1.4301) stainless steel. Upper deck cover is made of carbon steel. Machine has 3 levels of separation with an internal diameter of 1820 mm. Central top inlet and 4 side outlets. Machine is driven by electric motor with power 4 kW, 1460 rpm 230/400 volts, 50 Hz. Screen is mounted on carbon steel based. Fpjdpfx Aszbuf Nsnzoh Specifications: Material of Construction: Stainless steel / carbon steel Number of Decks: 3 Diameter: 1820 mm Horse power: 4 kW

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. Fjdpfx Anoy Ih Rgezeph - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.