Used 2 Cast Iron V Supports for sale (95,185)

Condition: used, 2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit Ideal for positioning large rotors Lhsdpjxx T Amjfx Abyoh

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Lhedpfx Abow Sfpteysh

Condition: good (used), Cast iron marbles Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Lhodpfx Aeh Awqgsbysh Weight: 7 T 2 same plates available.

Condition: excellent (used), Julabo Type: FP51-SL (v.2) Cryostat for low temperatures below -50 °C with a bath opening for internal and external temperature control. Cryostat circulators from the HighTech series, with HL or SL thermostats, are equipped with powerful pressure and suction pumps. The devices offer the full range of functions of the professional HighTech thermostat series. Technical data for FP51-SL Dimensions and volume Dimensions (W × D × H) 46 x 55 x 89 cm Filling volume 7.5 ... 12 l Weight 90 kg Pump connection thread M16x1 external thread Temperature values: Working temperature range -51 ... +200°C Temperature stability ±0.05°C Setting of the temperature display resolution 0.01°C Temperature display resolution 0.01°C Permissible ambient temperature +5 ... +40°C Supply voltage 400V/3PNPE/50Hz (plug 16A CEE) (R507) Performance data: Heating power 3 kW Cooling power 20 °C 2kW, 0°C 1.5 kW, -20°C 1 kW, -40°C 0.26 kW Refrigerant R507 Global warming potential 3985 Ljdezgaa Ijpfx Abyjhh Filling weight 1030 g Carbon dioxide equivalent 4.10455 t Pump performance Flow rate 22 ... 26 l/min Pump performance Delivery pressure 0.4 ... 0.7 bar Maximum suction capacity 0.2 ... 0.4 bar Viscosity max. 70 cSt Current consumption 16 A Electronics Interfaces Profibus optional Pt100 External sensor connection integrated Integrated program generator 6x60 steps Temperature control ICC Absolute temperature calibration 3-point calibration Temperature display VFD Temperature setting Keypad Voltage variants 400V/3PNPE/50Hz (plug 16A CEE) (R507) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), 1 unused universal milling head in an enhanced design for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON," swiveling over 2 levels, any angle adjustable. Spindle mount: ISO 40 Reach: approx. 360 mm D8ot3uy Rated drive power: 10 HP Max. speed: 1800 RPM Weight: approx. 82 kg Accessories / Special features: • With adapter plate in an enhanced design with an additional helical gear Ljdpfsbpmw Nox Abyshh • Tool clamping: manual • The main spindle and all shafts and interfaces are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing any adjustment angle! System "HURON" • Conical interfaces are ground according to the "KLINGELNBERG" system • The roller bearings of the main spindle consist of conical high-precision rollers • 1 drive gear, helical • 1 tool clamping screw • Operating manual Delivery time: immediately, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Lhsdpfx Abozcfdfjysh Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

Condition: ready for operation (used), perske Frc 71.12-2 Motor SN 840646 10A VDE V, used, strong signs of use, 100% functional, scope of delivery as per photos Lsdpfx Absrraqvsyjhh

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, total height: 765 mm, overall weight: 850 kg, total width: 1,000 mm, total length: 1,500 mm, Measuring and marking plate Cast iron Precision surface plate Manufacturer: FUJITA Lhjdpfx Aowr Umpjbyeh Type:JIS B 7513 Surface size: Length:1500mm Width:1000mm Height:250mm Flatness of the surface used (μm) Accuracy exceeding JIS standards Accuracy according to JIS standards No. 210 (Grade 0): 8 No. 211 (Class 1): 16 Weight: 850kg + support frame: ca 120kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm Lsdpfxju Ndf Ie Abyohh *

Condition: used, Cast iron control/tracing marble Length: 1700 mm Width: 700 mm Lhedszd Un Uspfx Abysh Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T

Condition: good (used), Year of construction: 2000, Cast iron mounting plate, manufacturer: STOLLE, type: ASP 1610 Length: 1610 mm, width: 250 mm, height: 60 mm T-slot for M16 In good condition. Ljdpfehcin Hjx Abyohh

Condition: used, mileage: 2,52,560 km, power: 310 kW (421.48 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 15,150 kg, maximum load weight: 10,850 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, next inspection (TÜV): 03/2025, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 6,510 mm, loading space width: 2,490 mm, loading space height: 950 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, optional house, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off, differential lock, work lights, leaf suspension, air+light trailer hitch, aluminum tank, lashing eyes, U-protection, aluminum side guards, pendulum flaps, roof hatch, crane at rear, emergency stop, grab control, high seat, 2-point support hyd. Aluminum side protection, pendulum flaps, roof hatch, crane at rear, emergency stop, grab control, high seat, 2-point hydraulic outriggers, 2x hydr, 2x hydr. extensions, green environmental sticker Wheelbase: 4500 mm Body: Platform body with aluminum drop sides & rear crane Atlas AK 186.3 V-2 with high seat 8t front axle, rear axle disc wheel 233 planetary 13.4t, electronic brake system with ABS and ASR, disc brakes with partial protection on VA and HA, condensation water monitoring for compressed air system, front underride guard made of aluminum, stabilizer front axle, stabilizer rear axle, smoker package, residual heat utilization, construction site filter, additional thermal insulation, PSM, reversing alarm, ClassicSpace, comfort locking system, Power drive program, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, High Performance Engine Brake, transmission oil cooling, ESP, Lane Keeping Assist, Attention Assist, refrigerator, auxiliary drive MB 131-2c pump. Load chart: 5.9m-3200kg, 8.5m-2120kg, 11.2m-1600kg! Pallet tongs available for an extra charge of € 2,900.00 net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Lhodpfxovhnypo Abyeh

Condition: used, Year of construction: 2010, x-travel 450 mm y-travel 400 mm z-travel 320 mm tool taper HSK 63 spindle turning speed range 0 - 10000 U/min rapid traverse 30 m/min control GE FANUC Series 16 i System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with Ljdpstqqqmsfx Abyjhh 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, travel paths module 3: X3 / Y3 / Z3 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø, (B-axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device

Condition: used, Machining and welding plate, cast steel, gray cast iron, heavily ribbed Length: 2000 mm Width: 1200 mm Thickness: 150 mm Lhsdpfjdzqq Ujx Abyoh Working height: 800 mm Plate thickness: 35 mm - Base frame made of solid wood Weight: approx. 950 kg Good surface finish

Condition: used, Heavy-duty straightening and welding plate, steel and grey cast iron, heavily ribbed formerly a marking and measuring plate heavy straightening plate length 2000 mm width 1000 mm thickness 160 mm working height 850 mm plate thickness approx. 35 mm throughout - 3 height-adjustable feet weight with feet 680 kg Lhedou Inwfepfx Abysh good condition

Condition: used, Alignment and welding plate, made of cast steel – gray cast iron, heavily ribbed Heavy-duty alignment plate Length: 1985 mm Width: 1000 mm Thickness with ribs: 220 mm Working height: 860 mm Plate thickness: approx. 35 mm, continuous Ledokpwuxopfx Abyohh - 4 adjustable feet Weight: 1050 kg

Condition: used, Straightening and welding plate, cast steel and gray cast iron, heavily ribbed Cast plate, heavy straightening plate Ljdpsrl U Swsfx Abyshh Length 1500 mm Width 1000 mm Thickness 100 mm Continuous plate thickness approx. 37 mm Table height 860 mm - Table base made of steel (custom-made) Weight 640 kg Good condition

Condition: used, Pair of cast iron angle plates Lsdoxx Tuvjpfx Abyshh Height: 3000 mm Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Condition: used, Cast angle plate Width: 640 mm Height: 400 mm Depth: 320 mm Slots dimensions: 100 x 24 mm Ledpfx Ajxm Sgyebyjhh Weight: 110 KG

Condition: excellent (used), 1 used, very well-maintained universal milling head for retrofitting to conventional, NC, or CNC milling machines or boring mills of any kind, "HURON" system, swivels across 2 axes, every angle adjustable. Ljdpeyc Ei Uefx Abyehh Spindle taper ISO 50 Reach approx. 360 mm Rated drive power 10 HP Max. speed 1800 rpm Weight approx. 82 kg Accessories / Special features: • Manual tool clamping • Main spindle and all shafts/gears are made from case-hardened and tempered chrome-nickel steel • Two rotatable axes for infinitely adjustable angles! "HURON" system • Conical gears are ground according to the "KLINGELNBERG" system • The main spindle rolling bearings are high-precision tapered roller bearings • 1 pull stud for tool retention This high-quality milling head was used as a loaner head and only deployed for repair purposes when the main head was being serviced or overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: Robot: 915252 / Controller: 67104, overall weight: 1,501 kg, load capacity: 270 kg, arm reach: 2,700 mm, For sale is a used, tested KUKA industrial robot, type KR 270-2, equipped with a (V)KRC2 ed05 controller. The 6-axis robot was manufactured in 2009 (manipulator and controller) and is designed for heavy-duty industrial applications. With a payload capacity of 270 kg and a reach of 2700 mm, the system is suitable for areas such as handling heavy components, spot welding, and palletizing. Serial numbers are 915252 for the robot and 67104 for the controller. Operating hours are unknown. Lsdey N Ehxjpfx Abyehh

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: Roboter: 924191 / Steuerung: 05307, overall weight: 1,597 kg, load capacity: 210 kg, arm reach: 2,700 mm, For sale is a used KUKA industrial robot, model KR 210-2 2000, equipped with a KR C2 controller featuring a KPC ed05 hardware upgrade. The 6-axis robot was manufactured in 2011 (manipulator) and 2002 (controller), with the controller PC technically upgraded in February 2013. The system offers a payload capacity of 210 kg and a reach of 2700 mm, and is designed for industrial applications such as handling, assembly, spot welding, and palletizing. Serial numbers are 924191 for the robot and 05307 for the controller. Operating hours are unknown. Lsdpfx Aey N Ehlebyehh

Condition: good (used), Year of construction: 1990, total height: 350 mm, total length: 5,100 mm, total width: 1,500 mm, T slotted bed plate STOLLE - Cast iron Floorplate Length: 5100mm Floorplate Width: 1500mm Height: 350mm No. Of T-slots: 5 Distance from T to T-slot / Jump:300mm T -slot size: 28mm Weight a plate approx.: 5800kg Number of matching pieces: 1 Length: 5100mm Width: 1500mm Height: 350mm Ledpfx Aoxdwwfebyehh

Condition: used, (8) Angle plates as detailed. 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate 112782 910mm x 700mm x 1800mm Angle Plate Lhodeyi Tbfepfx Abyoh 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112787 1020mm x 1010mm x 4280mm Angle Plate 112789 800mm x 750mm x 1190mm Angle Plate 112791 600mm x 500mm 1800mm Angle Plate

Condition: used, Year of construction: 2004, Force Presscylinder: 4000 KN Steel, Gush: 4-6 to/h Ljdpfx Abslhqc Njyshh Aluminium: 3-4 to/h Driving Power: 1x22 kW Arrangement Surface 7x4, 2x4, 1 mxm Machnie weight: 23 to Place: Austria Available immediately