Used Pye 250 for sale (10,412)

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Fpedpfx Aas Ait Eds Eep Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 250 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 110 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 750 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 2,200 mm, total width: 1,250 mm, total height: 3,700 mm, overall weight: 8,000 kg, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Fpodpfxjvcb Tlj Aa Eep

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with draw cushion - Pressing force: 2500 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Draw cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm can be retrofitted with: - new control system, new control cabinet, light curtain (1 cycle, 2 cycles, protection), new hydraulics, Fedpfoycl Evjx Aa Ejpp - new seals - new occupational safety inspection

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s Fedpfx Aexna Uzsa Eepp operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Fpjdpfxsu Dxb Tj Aa Esp Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 95,739 h, functionality: fully functional, machine/vehicle number: 15125250324, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 3,000 kg, overall weight: 22,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 38,229 h, coolant supply: 40 bar, spindle motor power: 48 W, spindle nose: SK50, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a DECKEL MAHO DMF 250 linear, manufactured in 2005, from our current production facility. Sale due to modernization of the machine park. The machine is operational, connected to power, and can be inspected and demonstrated in operation after prior arrangement at 84089 Aiglsbach. TECHNICAL DATA Manufacturer / Model: DECKEL MAHO DMF 250 linear Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Fpodpfx Ao Aitphsa Esp Machine number: 15125250324 Travel ranges X / Y / Z: 2,500 / 920 / 820 mm Tool holder: SK50 Spindle speed: 10,000 min⁻¹ Tool magazine: 30 positions Internal cooling (IKZ): 40 bar Measuring probe: Heidenhain Max. table load: 3,000 kg Machine weight: approx. 22,000 kg OPERATING HOURS Total operating hours according to the recorded meter reading: approx. 95,739 h Spindle hours according to the recorded meter reading: approx. 38,229 h Motor spindle replaced after approx. 36,670 spindle hours; therefore, approx. 1,559 spindle hours since replacement, based on the meter reading. As the machine is in current operation, the hours may increase until the sale. EXTENSIVE OVERHAUL 2026 Documented net overhaul costs: approx. €61,200. - Motor spindle replaced - Y-axis: Linear guides / guide carriages and ball screw overhauled - Z-ball screw including bearing renewed - Geometry newly adjusted and measured - Current Renishaw ball bar measurement available Evidence of the overhaul measures and measurements is available. PRICE AND INSPECTION €99,900 net, negotiable, plus statutory VAT. Location: 84089 Aiglsbach. Inspection and demonstration under power after prior arrangement.

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Fodpfx Aaehktq Aj Ejpp Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Fsdpfsz Sm Ddex Aa Ejpp Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: excellent (used), Catalog number: 7548 TECHNICAL DATA track width 250mm roller width 250mm max. blade diameter 350mm blade bore diameter 80mm max. cutting height 120mm table width with clearance 700mm table length 1790mm *from above: rollers pressure roller, smooth rollers pressure roller, smooth saw blade roller smooth pressure rollers 2 pcs from below: guide rail sliding roller, smooth rollers track central lubrication feed motor 1.1kW main motor 30kW electric lifting of the machine body manual lifting of the saw blade roller diameter of the extraction nozzle 160mm overall dimensions L/W/H 2250x1700x2000mm approximate weight 3000kg – German made Fpjdozwwuqepfx Aa Eep – electric lifting of the machine body and roller – smooth adjustment of feed speed – multi-blade saw, used, very good condition Net price: 68900 PLN Net price: 16023 EUR depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number 7308 Fjdpfx Aajzww A Io Ejpp TECHNICAL DATA - track width 250mm - shaft width 350mm - shaft diameter 80mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 150mm - table width with clearance 700mm - table length 1790mm from above: - pawls - pressure shaft, sliding - pawls - pressure shaft, smooth - shaft with saw blades - smooth pressure shaft, 2 pcs from below: - guide strip - sliding, smooth shaft - pawls - track feed table - roller width 500mm - number of rollers 3 pcs - overall dimensions of the feed table (length/width/height) 580x530x900mm outfeed table - roller width 500mm - number of rollers 6 pcs - overall dimensions of the outfeed table (length/width/height) 1210x535x900mm - central lubrication - stepless feed speed adjustment - main motor 37kW - dust extraction nozzle diameter 140mm - overall dimensions of the multi-blade saw (length/width/height) 2000x1450x2000mm - total weight approx. 3000kg ADVANTAGES – German production – large cutting height – feed and outfeed tables – used multi-blade saw, very good condition Net price: 46900 PLN Net price: 10910 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (the price may change in case of larger exchange rate fluctuations)

Year of construction: 2019, condition: good (used), functionality: fully functional, UK250 tabletop rewinder · Gepard 500 Fjdpfj Aiu Trex Aa Espp 2019 20–250 mm 510 mm 1–3 inches; up to 6 inches with adapter 1–21 N · 6 bar Up to 500 m/min, depending on the material and winding diameter.

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN347467, functionality: fully functional, Chamber furnace, fully overhauled, 12-month warranty -Maximum temperature 650 °C -Internal dimensions W x D x H: 600 x 750 x 600 mm -External dimensions W x D x H: 1250 x 1700 x 1750 mm Fpodpfs Aivvhsx Aa Eep -Capacity: 250 liters -Nabertherm controller -Pneumatic lift-up door -Heating time to maximum temperature: 90 minutes -1 bottom plate -1 internal plate (3 additional plates available at an extra charge) -Additional thermocouple (batch thermocouple) -Extra 50 mm feedthrough -No exhaust, no controlled cooling -Weight: 650 kg -Power consumption: 20 kW -Documentation, CE declaration -Electrically tested and with current DGUV test report The furnace has been overhauled. All contactors and relays have been replaced. Heating elements have been inspected and measured. Very good condition. Inspection by appointment. Furnace, furnaces, muffle furnace, industrial furnace, chamber furnace, firing furnace, sintering furnace, annealing furnace, laboratory furnace, hardening furnace, ceramic furnace.

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Fpjdpjz Snfcjfx Aa Eop Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: good (used), Year of construction: 2011, operating hours: 59,000 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 30 mm, clearance between the columns: 270 mm, injection pressure: 2,000 bar, total length: 3,180 mm, total width: 1,430 mm, total height: 1,850 mm, overall weight: 2,110 kg, warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS Fodpfxjz Eax Ee Aa Ejpp number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m total weight: 2110KG equipment included incl. Spruepicker screen text german screen text german core pulling hydraulically 1x Anti vibration mounts

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle motor power: 26 W, number of spindles: 2, spindle speed (max.): 5,000 rpm, spindle bore: 77 mm, Equipment: documentation/manual, MAZAK QTN-250 II MSY turning center + Fanuc robot with Meccano automation for flanges Year 2015 Control unit: MATRIX II Maximum swing (capacity): 640 Workable diameter / standard workable diameter (capacity): 380 Maximum workable length*1 (capacity): 500 Bar capacity (capacity): 77 Chuck size (main spindle): 250/210 Spindle speed (main spindle): 4500/5000 Spindle nose (main spindle): ASA 8 / ASA 5 Spindle speed (powered tool spindle): 5000 Rapid traverse rate axis X (feed): 36,000 Rapid traverse rate axis Z (feed): 36,000 Rapid traverse rate axis C (feed): 550 Travel (tailstock): 500 Main spindle motor (continuous / 40% duty) (motors): 26 kW Fpjdpjzz Rh Eefx Aa Eep Coolant tank (coolant): 300 l Sub-spindle chuck diameter: 210 Sub-spindle speed: 5000 Travel axes X, Z, Y: 230mm, 575mm, 100mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm Fpedpfxsz Nv H Ue Aa Eep - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: used, functionality: fully functional, Saw motor: 1.5 kW Fjdpfx Ae Ai Drhea Eepp Cutting speed, infinitely variable: 17-90 m/min Saw blade: 3660 x 27 x 0.9 mm Cutting range – round / square: 250 / 250 mm Cutting range – rectangular: 300 x 260 mm

Condition: used, functionality: fully functional, Year of construction: 2018, stroke length: 250 mm, overall weight: 17,500 kg, power: 26 kW (35.35 HP), input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, pressing force: 250 t, table length: 3,100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this used Bystronic Xpert Pro 250/3100 press brake, manufactured in 2018. Model: Xpert Pro 250/3100 Year of manufacture: 2018 Serial number: BY041049 Working length: 3100 mm Maximum pressing force: 2500 kN Maximum stroke: 250 mm Weight: 17500 kg Main motor power: 22 kW Total connected load: 26 kW Operating voltage: 3-phase 400 V AC Frequency: 50 Hz Fpodpfxe Adt S Ne Aa Eop Control voltage: 24 V DC Rated current of the upstream fuse: 80 A Maximum pneumatic operating pressure: 8 bar Maximum hydraulic operating pressure: 310 bar Self-assembly and ex works. If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Fpodpfx Aaotwdvie Ejp Length: 90 cm Weight: approx. 150 kg

Condition: excellent (used), Catalog number 7445 TECHNICAL DATA - track width 250mm - roller width 400mm - max. blade diameter 400mm - blade bore diameter 80mm - max. cutting height 140mm - table width with clearance 730mm - table length 2120mm *from above: - pawls - smooth pressure roller - pawls - smooth pressure roller - saw arbor - 2 smooth pressure rollers from below: - guide - smooth sliding roller - pawls - track - central lubrication - 2 lasers - stepless feed rate adjustment - feed motor 1.1kW - main motor 37kW Fpedpfxezx Rnto Aa Eep - electric body lifting 0.75kW - electric saw arbor lifting 0.75kW - dust extraction nozzle diameter 200mm - overall dimensions L/W/H 2200x1850x2100mm - weight approx. 3000kg ADVANTAGES - German production - laser - electric body and arbor lifting - stepless feed rate adjustment - multi-blade saw, used, very good condition Net price: 109900 PLN Net price: 25558 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max. blade diameter 400mm - blade bore diameter 80mm - max. cutting height 140mm - table width with clearance 730mm - table length 2130mm from top: - pawls - pressure shaft, sliding - pawls - pressure shaft, smooth - shaft with saw blades - smooth, pressure shaft 4 pcs Fjdezxqv Dspfx Aa Ejpp from bottom: - sliding, smooth shaft - pawls - track feed table + guide rail - roller width 460mm - feeder dimensions L/W 1660x630mm - overall dimensions L/W/H 2010x630x900mm discharge table - pulling rollers 8 pcs - roller width 800mm - overall dimensions L/W/H 4400x980x880mm - central lubrication - electric lifting of the machine body up/down 0.55kW - electric adjustment of the saw blade shaft 0.55kW - stepless feed rate adjustment 1-39m/min - feed motor 1.1kW - main motor 30kW - dust extraction nozzle diameter 210mm - overall dimensions of the multi-blade saw L/W/H 2520x1870x2000mm + control panel - total weight approximately 2500kg ADVANTAGES - German production - large cutting height - feed and discharge tables - used multi-blade saw, very good condition Net price: 89,900 PLN Net price: 20,907 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm table length: 1460mm – top: 2 rows of pawls smooth, sliding roller roller with saws smooth, sliding roller – bottom: guide pawls track 2 feed speed settings + stepless adjustment central lubrication feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm overall dimensions (L/W/H): 1700x1450x1500mm weight: approx. 1800kg – made in Italy – DTR documentation available – robust machine – used multi-blade saw, very good condition Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations) Fpsdpfxoztad Tj Aa Eep

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 2,53,000 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 2,000 kg, number of shelf rows: 10, shelf height: 7,500 mm, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racking (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, load capacity per bay 2000 kg. Fedpe Adnxkjfx Aa Ejpp - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, screws - 400 floor anchors (ZZBA1210) - 720 individual beams (T27114 - RAL2008) - 2 end-of-aisle protectors / collision guards (ZRS40901) - 4 side protectors (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load capacity signs (BSMcP) Frames are screwed together, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivered free to the construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: ready for operation (used), functionality: fully functional, PE/PP PIPE HEAD RK 250 / 600 Output/hour Type: PO 250/600 System with spiral distributor, without color stripes Application for PE pipes and PP pipes Max. diameter: 250 mm Fjdpfx Aj Aigyzja Eepp Min. diameter: 63 mm Max. output: 600 kg/h Condition: Very good, operational The pipe head is my property. Location: Sachal Extrusion Machines Bahnhofstr. 6 D-26345 Bockhorn-Grabstede

Condition: used, Year of construction: 1985, machine/vehicle number: ARP-250, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, stroke length: 125 mm, total length: 2,500 mm, total width: 3,000 mm, total height: 4,500 mm, overall weight: 25,000 kg, Single-column (C-frame) eccentric press Ivo Lola Ribar ARP-250, 2,500 kN, for sale. The press has been completely overhauled, is regularly maintained, is in very good mechanical and functional condition, and is ready for immediate operation. Inspection under power is possible by appointment. Technical data (as per nameplate): Nominal force: 2,500 kN (250 t) Stroke: 40–190 mm, adjustable Ram adjustment: 125 mm Strokes per minute: 40 min⁻¹ Max. sheet thickness: 24 mm Distance table–ram (stroke down): 300–425 mm at 190 mm stroke, 375–500 mm at 40 mm stroke Year of manufacture: 1985 Equipment: Hydraulic die cushion Pneumatic clutch-brake T-slot table Central lubrication Air tank with service unit Separate electrical cabinet with control Dimensions and connection (approx.): Table size: approx. 1,380 x 880 mm Ram face: approx. 1,200 x 800 mm Table height above floor: approx. 800 mm Drive power: approx. 22 kW Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 24 t Fsds Af Na Aepfx Aa Ejpp Dimensions (L x W x H): approx. 2.5 x 3.0 x 4.5 m Location: Slovenia Delivery terms: EXW Price: EUR 22,000 net