Used Ageo Ghp 125 Hk for sale (6,026)

Year of construction: 1990, condition: not inspected (used), Force: 125 tons (2x63) Speed adjustable 0-10mm/sec. Speed up: 20mm/sec Distances between columns 950x550mm Table size front 950x820mm Lodpfxjgy Hzpj Ackjab Table size sidewise 1220x550mm Ram size see table Daylight: 700mm Stroke: 550mm Weight: 5500 kos Requested power: 18,5kw 2 precision cylinders steples adjustable strokeend

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) Laodpfx Aswva I Hsckeb - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation Ledpfxey Tvdxe Ackoab - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: new, working width: 1,250 mm, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - Mulches grass and light brush up to 7 cm in diameter - Suitable for excavators from 5 to 15 tonnes - Universal interface for mounting various adapter plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motors depending on carrier's oil flow - 4D ROLLER: reinforced support roller 152 mm Ø, with double-taper roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front chain guard - Rear rubber protection - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) Laedpfx Acey E Etyekob OPT 555 Oscillating Adapter OPT 372 Hydraulic 190° Rotary Device Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Please contact Marius Herden for more information.

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm Ljdsv Svc Topfx Ackeab dayligth 380 mm stroke 260 mm weight of the machine ca. ca. 750 kg

Condition: used, Year of construction: 1960, pressure 10 t distance between columns 260 mm dayligth 210 mm Lajdpfx Ajwl N Saockjb table surface area 275 x 260 mm

Condition: good (used), Year of construction: 1987, Equipment:  Pressing force: 160 kN / 16 MPa  Spindle diameter: 60 mm  Spindle pitch per revolution: 32 mm  Clearance between columns: 410 mm  Max. clear height between table and ram: 270 mm  Table area: 410 x 280 mm  Weight: 335 kg Lodpfoy S Syaex Ackjab Condition: good, little use

Condition: new, For sale: New KSB ETABLOC GN 65-125 centrifugal pump with Siemens 5.5 kW motor. The unit is from warehouse stock – excellent condition, unused. Lodpfx Asyuqxrecksab KSB ETABLOC series pumps are high-quality industrial pumps designed for water installations, heating and cooling systems, process installations, and general industrial applications. Robust construction and a reputable Siemens motor ensure high reliability and long service life. Pump technical data • Manufacturer: KSB Aktiengesellschaft • Model: ETABLOC GN 65-125/552 • Capacity: 18 – 136 m³/h • Head: 11 – 19.2 m • Rotational speed: 2900 rpm Motor • Manufacturer: Siemens • Model: 1LA7130-2AA66 • Power: 5.5 kW • Voltage: 400 / 690 V • Protection class: IP55 • Housing: B35 The pump is equipped with flanged connections – ready for installation in your system.

Condition: good (used), Busch SE 125 Pile Turner This machine is like new, fully functional, and ready to use. This turner is from the German manufacturer Busch. Laodpfx Acsy Ehiqekeb This is the current model in production. Technical specifications: Format: 1200 x 800 mm Stack height: 1350 mm Load capacity: 1000 kg Device weight: 850 kg Power supply: 380 V Controlled from a control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving. Includes documentation.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Hand insertion safety – Pressing force up to 100 kN Ledpey St I Sjfx Ackeab Throat depth: 210 mm Table size (W x D): approx. 500 x 400 mm Installation height with/without clamping plate: 300 mm Stroke: 100 mm Total power: 2.5 kW Weight: approx. 2.5 t Oil fill: approx. 150 l Required space (W x D x H): approx. 0.95 x 1.5 x 1.95 m Equipment and delivery scope: Switch-over between travel / pressure Pressure control valve with gauge display Adjustable dwell time Documentation

Condition: good (used), Busch SE 125 (175) Pile turner This machine is like new, fully functional, and ready to use. Manufactured in 2017. This turner is from the German manufacturer Busch. This is the current model in production. Extended stack height to 175 cm. Technical specifications: Format: 1250 x 900 mm Stack height: 1750 mm Load capacity: 1200 kg Lsdpfoy Ah Hwox Acksab Device weight: 1000 kg 380 V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: new, mileage: 500 km, power: 397 kW (539.77 HP), axle configuration: 4x2, color: orange, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (by phone at ...). Lasdpfx Asy Svr Tjckjb IVECO X-Way AD190X54/P 4x2 Tipper with Crane Crane: Fassi F125AC.1.24, remote control, 2-point stabilizers, load chart: see photos, steel rims, standard reverse gears, EURO VI E emission standard, speed limiter 90 km/h, steel bumper, single-piece version (Heavy: 3-piece), first aid kit, cab exterior components in black, AD MY LOW ROOF CAB, cab roof insulation, standard, electronic immobilizer and second vehicle key, sun blind for side window, driver's side, rear wall storage with 2 compartments, dashboard design: plastic with black trim, 10-inch instrument cluster, plastic steering wheel, EU digital tachograph 4.1, static passenger seat, smart alternator 2880 W (24V x 120A), demand-controlled, air suspension on rear axle, parabolic spring on front axle, 2 wheel chocks, vertical dry air filter, moderate climate configuration, 2-cylinder, 630 cc air compressor, chassis frame in grey, rear axle stabilizer, steel air tanks, number depending on suspension and trailer version, front axle stabilizer, mechanical battery disconnect switch on chassis, right side, batteries 180 Ah (Heavy) / 170 Ah (Eurocargo), recommended for use of tail lift and/or PTO, standard ride height, trailer version for towing with full brake system, fuel tank 290 liters, aluminum, trailer socket for 24-volt operation, 15-pin, rear axle ratio: 3.79, rear frame overhang 1848 mm, ECO/NORMAL/PERFORMANCE MODE, 4G Connectivity Box including TCO service contract, CURSOR 13 engine, internal TPMS sensors, vehicle data interface (VDI) for telematics (FMS 4.0), ECO-Roll transmission software (freewheeling function), lane departure warning (LDWS), driver fatigue monitoring, warning triangle per ECE-27, standard rear lights, hill start assist (Hill Holder), rearview monitoring system with camera, blind spot monitoring (BSIS) right side, intelligent speed assistant (ISA), NO HIGH WAY ASSIST, front area monitoring (MOIS), pre-wiring for alcohol interlock (ALC), 12TX 2650 TO transmission, ECAS air suspension with 2 sensors, rocking mode, tires: 315/80R22.5, PTO NH/4C for pump, right side, Mirror Cams, covers for AS, FHS in vehicle color / for AT/AD in black, mechanical roof hatch, fog lights incl. cornering/turn light, cab air suspension, electric cab tipping, LED headlamps front, headlamp guards, LED beacons left and right, transparent sun visor installed outside on cab roof, hot water circulation pump suitable as a rest heater (uses remaining engine heat and circulates in system), air horn behind bumper (compressed air), luxury driver's seat: air-suspended, heated, multi-adjustable, right armrest (not for Eurocargo), lumbar and headrest with integrated 3-point seatbelt, fully automatic air conditioning, ashtray in center console, tectyl coating for stone chip protection, front axle weight 9,000 kg / drive axle 11,500 kg (technically up to 13,000 kg), brake system version for...

Condition: excellent (used), Year of construction: 2018, Weinig production line CONTUREX C 125, year of manufacture 2018 Lsdpfey Emrkjx Ackjab

Condition: good (used), Year of construction: 1982, machine/vehicle number: 14899, Offer 26027 Technical specifications: - Max. pressing force: 32 t - Max. ram stroke approx.: 250 mm - Max. installation height: 350 mm - Travel per handwheel revolution approx.: 48 mm - Upright spacing / throat clearance approx.: 575 mm - Table surface with 4 diagonal T-slots: 575 x 475 mm - Pressure plate area: 500 x 260 mm Ljdpfx Acjy Icb Hekjab - Upper tool holder: 30 mm - Through-hole in table: 200 mm - Required space approx.: W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx.: 1000 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, type of input current: three-phase, table width: 805 mm, table length: 1,205 mm, oil tank capacity: 250 l, total length: 2,050 mm, total width: 1,410 mm, total height: 3,200 mm, overall weight: 8,000 kg, DGUV certified until: 08/2020, pressing speed: 11 mm/s, Equipment: documentation/manual, safety light barrier, For sale: fully operational and complete Ageo 160t hydraulic press. Full documentation and maintenance logbook are available. On-site inspection possible. VAT invoice provided. Lodpjyxg D Hjfx Acksab

Condition: used, mileage: 60,774 km, power: 90 kW (122.37 HP), first registration: 03/2014, fuel type: diesel, empty load weight: 3,060 kg, maximum load weight: 2,940 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,700 mm, brakes: other, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, loading space volume: 4 m³, operating hours: 5,215 h, Equipment: air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, soot filter, trailer coupling, * German vehicle * From first owner * Original 60,774 km * Only 5,215 operating hours * Condition, see photos * 4x4 all-wheel drive with hydrostatic transmission * Zöller refuse collection system MICRO, type HG 4 HK * Rear loader HL 660 with comb lift for refuse containers 80-770 l * Container capacity: 4 m³ * Loading doors on both sides * Operation possible from both right and left sides * Easy unloading by tipping rearwards Lsdpfxoytxa Is Acksab * Front lift with municipal hydraulics * Trailer coupling * Towing capacity: 3,500 kg * Air conditioning * Auxiliary heater * 2 seats * Rear-view camera * Comfort driver's air-suspended seat * Radio * Leaf spring suspension * Rotating beacon * Work lights * Storage box * Raised exhaust * Wheelbase: 2,700 mm * GVW: 6,000 kg * Unladen weight: 3,060 kg * Payload: 2,940 kg If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstanding regarding condition and suitability. Viewings and inspections are possible at any time by appointment and expressly encouraged. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to verify the condition and specifications of the goods/vehicles independently. Subject to change, prior sale and errors excepted.

Condition: used, Year of construction: 1973, Column Spindle Press Ageo Type 60-960 Important Information: – The stated price applies only to self-collection. – Dismantling, loading, and transport are the sole responsibility and expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions. Ljdpfowtnigjx Ackjab

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Laedjxl Rgijpfx Acksb

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm range of turning diam 460-1250mm Lsdpjk Dz N Isfx Ackeab

Condition: new, Year of construction: 2026, Vice is made of high-quality cast iron. Due to its precise guiding, this vice is used in industries where precision is key. Swivel base allows for 360o adjustment in the horizontal plane, and 90o adjustment in the vertical plane. Jaw inserts made of tool steel, hardened (55+- 3HRC) and precisely ground. Vice features Ljdpfx Acevxgh Tsksab Cast iron rotary QHK machine vice, useful while working with grinding, milling, drilling and planing machines, etc. Made of high-quality cast iron Equipped with swivel base with 360o pitch, 1o gradation Body, along with the moving jaw, is made of high-quality cast iron Top side of the lead screw secured from dirt and chips Possible disassembly of the swivel base While replacing inserts it is advised to machine their surfaces attached to the vice in order to achieve the accuracy parameters specified in the technical documentation

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur. Laodpfx Aoyi H Eqscksb

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm arm length 1.350 mm Lajdswiikdjpfx Ackeb workpiece height max. 1630 mm turning speeds 19 - 1320 U/min bore spindles - Morse Taper 5 MK engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Ledpfx Acoticdljkeab Dimensions: 1400x1400x960mm Mass: 350

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control Lasdpsvbh Rhsfx Ackjb *

Condition: good (used), Technical data for the pallet rack traverse: Rack system: Stow Type: Pal Rack NS Included in delivery are: 01x pallet rack traverse, used Material color: RAL 2004 orange box profile: 125 x 50 mm type of cross beam: PNB0485/1.5 agraffe: 4 HK (hooks) clear width: 3.600 mm max. load per truss pair 1.832 kg, with evenly distributed load Laodolvrg Rjpfx Acksb 02x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out