Used Alpahtec A-Es 75.28 V for sale (85,229)

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump Hfodoiyya Aopfx Aflok cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable Hedpfxoiyx Uzs Afljfk 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Hodpjy Rnizefx Aflsfk Transport possible.

Condition: ready for operation (used), Indramat MAC 71A-0-ES-2-C/095-A-1 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 92 x 92 mm, drive shaft diameter: 19 mm, used, with normal signs of wear, 100% functional. Hfedpfxsi D Iktj Aflek

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0, permanent magnet synchronous motor, serial number: 12254, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Hsdpevy N Sqsfx Aflsfk

Condition: new, Grundfos CM5-5-A-R-I-V-AQQV F-A-A-N horizontal suction pump, unused, 100% functional, scope of delivery as per photos Hodeuqr Hbspfx Aflsfk

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0 Permanent Magnet AC Servo Motor, Serial Number: 6782V, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hedpfoy T Dm Iox Aflofk

Condition: new, turning length 850 mm turning diameter 400 mm swing diameter over bed slide 245 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 260 mm spindle taper DIN 55029 D 1-5 taper in tailstock 3 MK quill travel 120 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1255 kg range L-W-H 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray Hfedpfx Aexaaxweflek - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip rear wall - Operating tool

Condition: excellent (used), I am offering for sale a professional laboratory power supply, the BEHA NG 310 P10 (UNIWATT), designed for service, laboratory, educational applications, and testing electronic devices. The device has been inspected and is in perfect working order. It features two independently adjustable 0–30 V / 3 A outputs and an additional stabilized 5 V / 3 A DC output. The power supply has digital displays and the ability to measure voltage and current. The housing shows normal signs of use, as seen in the pictures. It is sold in the exact condition as shown in the photographs. Technical data: • Manufacturer: CH. BEHA GmbH • Model: NG 310 P10 • Supply voltage: 230 V AC, 50/60 Hz • Current consumption: 2.2 A • Outputs: 2 × 0–30 V DC / 3 A 5 V DC / 3 A • Measurement input: 0–100 V DC • Digital voltage and current indicators • Catalog number: FW031003300D Hjdjzrttfepfx Afljfk • Country of origin: Germany Condition: • Used • Inspected – fully functional • Normal signs of use • Sold as shown in the pictures A robust, high-quality laboratory power supply from the renowned German company BEHA, ideal for electronic service centers, workshops, laboratories, schools, and research and development work. Thanks to its two independent adjustable channels and an additional 5 V output, it is perfect for testing, powering, and starting electronic circuits.

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: Hodpfx Aozpbufofljfk * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: excellent (used), For sale: Mannesmann Demag S040-B5-21-3 geared motor with a three-phase UMF71BX-6-Z motor, 0.25 kW. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good, with normal signs of wear and tear from use. The robust gearbox and reliable motor make this geared motor ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Manufacturer: Mannesmann Demag Gearbox type: S040-B5-21-3/ Motor type: UMF71BX-6-Z Motor power: 0.25 kW Power supply: 3× 220/380 V, 50 Hz Motor speed: 890 rpm Output speed: approx. 64 rpm Gear ratio: i = 14 Current: 1.56 / 0.90 A Power factor: cos φ 0.73 Protection rating: IP54 Insulation class: B Lubrication: synthetic oil Hedpfxsznxa As Aflefk Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE SF31DT71D-4BM geared motor with a 0.37 kW three-phase motor and an integrated 220 V AC electromagnetic brake. The unit is fully functional, tested, and ready for use. The geared motor is in good technical and visual condition. Normal signs of wear and tear resulting from use are visible. Hfjdpfsznnm Sex Aflok Technical data: Manufacturer: SEW-EURODRIVE Type: SF31DT71D-4BM Motor power: 0.37 kW Power supply: 3×220Δ / 380Y V, 50 Hz Motor speed: 1380 rpm Output speed: 42 rpm Torque: 60 Nm Brake: 220 V AC Braking torque: 5 Nm Protection class: IP54 Insulation class: B Weight: 16.88 kg Mounting position: IM V1A Year of manufacture: 2002 Country of manufacture: Germany

Condition: excellent (used), For sale: Mannesmann Dematic AG SFV20UD MNA 80 B4 geared motor with a 0.75 kW three-phase electric motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. Normal signs of wear resulting from operation are visible. Thanks to its robust construction and high torque, the geared motor is ideally suited for driving conveyors, feeders, production machinery, transport equipment, and other industrial applications. Hjdpfoznd Ufex Afljfk Technical data: Manufacturer: Mannesmann Dematic AG Type: SFV20UD MNA 80 B4 Design: IM B5.6 Power: 0.75 kW Motor speed: 1380 rpm Output torque: 62 Nm Supply voltage: 230 V Δ / 400 V Y Frequency: 50 Hz Rated current: 3.60 / 2.10 A Power factor: cos φ 0.73 Protection rating: IP54 Insulation class: B Operating mode: S1 (continuous duty) Weight: 13 kg Gearbox lubrication: mineral CLP oil Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE S30DT71K-2B geared motor with a three-phase electric motor and an integrated brake. Hedjznd Sdopfx Aflofk The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of wear and tear resulting from use are visible. This geared motor is perfectly suited for driving conveyors, feeders, production machines, packaging equipment, and other industrial applications. Technical data: Manufacturer: SEW-EURODRIVE Type: S30DT71K-2B Motor power: 0.25 kW Motor speed: 2700 rpm Output speed: 185 rpm Output torque: 10 Nm Power supply: 220 V Δ / 380 V Y Frequency: 50 Hz Rated current: 1.7 / 0.98 A Power factor: cos φ 0.85 Protection class: IP44 Insulation class: B Brake: 220 V Brake torque: 2.5 Nm Design: B6AB Lubricant: Mobil Glygoyle 30 Country of origin: Germany

Condition: excellent (used), For sale: SEW-Eurodrive SF32 DT80K4 geared motor with a 0.55 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. Normal signs of use resulting from operation are visible, but they do not affect its performance. Technical specifications: Hfodpfxozm R Ayj Aflok Manufacturer: SEW-Eurodrive Model: SF32 DT80K4 Rated power: 0.55 kW Power supply: 230/400 V (Δ/Y) Motor: 3-phase Frequency: 50 Hz Motor speed: 1360 rpm Output shaft speed: 77 rpm Rated current: 3.05 / 1.76 A Protection class: IP54 Insulation class: B Mounting method: B5 Weight: 16.15 kg Power factor (cos φ): 0.77 Country of manufacture: Germany

Condition: used, maximum load weight: 36,140 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS,

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Hfjdpfx Asziww Njfljk Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: used, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment: Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, neck height at the front approx. 130 mm. Coupling device: 2-inch kingpin. Underrun protection: bolted design, according to EC. Side underrun protection: according to EC, made of aluminum profiles, anodized. Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side. Axles: 3 x 9 t air suspension axle unit, disc brakes 22.5". Total stroke approx. 180 mm, raising and lowering device via rotary slide valve. Braking system: Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit. Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice. Tire pressure monitoring system (TPMS) via CAN bus system of the EBS. Fenders: according to EC. Spare wheel holder: none. Load securing: - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t - In the outer frame, holes for attaching lashing straps are provided every approx. 400-600 mm. Front wall: Reinforced steel construction, fixed, approx. 1,400 mm high. Internally lined with approx. 9 mm screen-printed material (approx. 1,250 mm high). Floor: approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles. Lighting system: according to EC, 24 Volt, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. Lane departure warning lights LED. 1x15- and 2x7-pole plug connections on the front crossmember. Equipment: - 2 wheel chocks with holder - Warning signs ECE 70 - Holder for rotating beacon, incl. rotating beacon - 2 rubber impact buffers at the rear - Access ladder at the rear right, foldable and extendable (without platform) - 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles. Painting: Front wall: RAL 3002 carmine red. Chassis: hot-dip galvanized. Outer frame: hot-dip galvanized + RAL 3002 carmine red. Center beams: RAL 3002 carmine red. SSV: Aluminum, anodized. Underrun protection: white (RAL 9016 traffic white). Components: galvanized/KTL black. Rims: silver. Outline marking: complete, yellow. Incl. special accessories. First axle liftable, with fully automatic, load-dependent lift control. 10 pairs of stake pockets in the outer frame, evenly distributed. 4 rows of stake pockets transverse to the loading area. 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm. Inside the front wall, a magazine for 20 stakes. 5 x 25-mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes. Side board and stake magazine: under the chassis, left and right, sliding rails for side boards and stakes. Container locks for 1 x 40' and 2 x 20' containers, rear-flush. Container locks for 1 x 20' container in the center. Work lights on the lamp carrier (switched via reverse gear). 2 Hfodpfx Afszrq U Hslsk

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Hfsdpfeyxxxvox Aflok - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, according to EC Side impact protection: * According to EC, made of aluminum profiles, anodized Hedozhd Ncjpfx Aflsfk Kingpin supports: * 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side Axles: * 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5" * Total stroke approx. 180 mm, raising and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching lashing straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Lighting: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights * Lane-keeping lights LED * 1x15- and 2x7-pole connector sockets on the front cross member Equipment: * Warning signs ECE 70 * Holder for rotating beacon, including rotating beacon * Foldable and extendable access ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: RAL 5010 azure blue * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 5010 azure blue * Crossbars: RAL 5010 azure blue * Kingpin supports: Aluminum, anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of crossbar pockets in the outer frame, evenly distributed * 4 rows of crossbar pockets transverse to the loading area * 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in crossbars * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars * Side board magazine under the chassis left and right * Sliding rails for side boards * Container locks for 1 x 40" and 2 x 20" containers, flush at the rear * Containe

Condition: new, maximum load weight: 14,910 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 6,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis frame: * Welded construction made of high-quality steel with cross members and an outer frame. Ramp storage: * Ramp storage between the longitudinal beams. Under-run protection: * Rigid under-run protection in accordance with ECE R58-03 * Side and under-run protection in accordance with EC regulations. Front support: * Front support with two-stage crank supports (2 x 12 t). Rear support: * Rear support with lockable drop supports. Axles: * 2 x 10t SAF axles with drum brakes, low-maintenance air suspension axle, lifting and lowering device with a total lifting stroke of approx. 180 mm, asbestos-free brake pads. Axle with a load capacity of 10,000 kg. * Compressed air tank, steel * Wheel fastening by center centering Tires: * Tires 235/75 R 17.5, on steel disc wheels, 8-ply, manufacturer of our choice * Tire pressure monitoring system, which indicates low tire pressure. Splash guard: * Plastic mudguards, splash flaps Load securing: * 6 pairs of lashing recesses designed for 8 t, evenly distributed on the outer frame * Beveled and perforated outer frame for attaching lashing hooks when the side boards are closed * Stake pockets: 3 pairs of welded stake pockets, internal dimension for stakes approx. 80 x 50 mm, evenly distributed. Braking system: * Automatic, load-dependent, two-circuit pneumatic braking system in accordance with EC regulations with spring-loaded parking brake (incl. 1 release valve), EBS connections for air (red/yellow), corrugated flexible lines for trailer. Floor: * Hardwood floor approx. 30 mm, with Z-profile boards. Front wall: * Designed as a removable side board, approx. 600 mm high. Lighting/electrical system: * Electrical system: 24-volt lighting system in accordance with StVZO * Multi-chamber rear lights, completely LED, with integrated ballast and flashing side marker lights. * On the trailer, additional position lights. * Position lights at the front, white (required for approval in EU countries and Switzerland). Electrical system: * Trailer connections: 2x7-pole * Trailer connection: 1x15-pole * Mounting plate for supply lines on the front cross member, lines permanently mounted, without separate connections, supply connections on the left. Accessories: * Wheel chocks in accordance with StVZO. * Plug-in revolving warning light at the rear. * Delivery of an additional 40 mm towing hitch (GVWR max. 13,500 kg). Painting: * Coating of undercarriage: galvanized + powder-coated * Chassis frame with high-quality hot-dip galvanizing and subsequent powder coating for optimum corrosion protection; the surface may show the ripple structure of the hot-dip galvanizing. * Coating of body parts: standard Color: * RAL 3002 carmine red * Center and corner profiles: KTL + powder coating: RAL 3002 carmine red * Side boards: RAL 3002 carmine red * Drawbar: hot-dip galvanized Hfedjzgqncepfx Aflok * We would like to point out that, due to the size of the chassis and the selected coating process (hot-dip galvanizing), surface imperfections may occur. These include, for example, zinc pimples, run-ons, zinc whiskers, distortion, etc. We have no influence on this, and it will not constitute a legal defect with regard to the appearance at a later date. Contour marking: * Yellow lateral reflective contour marking. * Yellow ref

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 533 mm, Tested forklift battery for your truck - 48V 5PZS 775Ah - DIN B + 1-year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity protocol supplied with delivery) + Year of manufacture: 2024 Dimensions: Length 1,035 mm Width 533 mm Height 784 mm Weight: approx. 1,160 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde A - 5224-00 Linde E 16 - 386-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 10 Linde K 12 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - front battery change Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front battery change Linde R 16 N HD - 1120-00 - front battery change Linde R 20 N - 1120-00 Linde R 20 N - 1120-00 - front battery change Linde R 20 N - 113-00 Linde R 20 N - 113-00 - vertical battery change Linde R 20 SN - 115-08 - vertical battery change Still EK 11 Still FM-X 14 N Still MX 10 Still R 20-16 Still RX 20-18 Still RX 20-18 P Still RX 20-20 Still RX 20-20 PL Jungheinrich ETM 214 Jungheinrich ETM 216 Jungheinrich ETV Jungheinrich ETV C 16 Jungheinrich ETV Q 20 Crown ESR 5220-1.6 Caterpillar NOH10NH Hedjy Rnn Ropfx Aflefk Caterpillar NR20NH Common battery sizes available - please enquire. Delivery possible.

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Hfsdpfx Afsw U H Sbslek Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, Year of construction: 2021, color: other, empty load weight: 2 kg, first registration: 01/2021, fuel type: gasoline, gearing type: other, NEW FLAT CONTAINER WITHOUT SIDES WITH HORNS IN THE FRONT SIDE REF: 22-N-79 TYPE: flatbed without sides T NEW: yes LID: no OPENING: / OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 3.20 m + 0.16 m beams EXTERNAL WIDTH OF THE BODY: 2.10 m FRONT SIDE: 1.40 m MC: / WEIGHT: BOTTOM: 4 mm WALL: / COLOR: to be painted The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. Hfodpfx Aov Hicpefljk S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Hodpoxrf Nrofx Aflsfk