Single-screw extruder ES 75 - 28 L/D

Alpahtec A-ES 75.28 V

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD Gjdpfx Aeiyya Aeh Hsbg main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Gbodpfjghgmzex Ah Heg Drive motor 37 kW

Condition: ready for operation (used), An air-conditioned office and commercial container Aztech is available. U-value: approx. 0.38W-0.46W/m²K, floor load capacity: approx. 100kg/m², interior height: approx. 2500mm, external dimensions X/Y/Z: approx. 3000mm/3000mm/2600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Gjdpfx Aow D Eubeh Hjbg

Condition: used, Year of construction: 2005, Technical details: Gbjdpfxjtuncce Ah Hsg screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production *

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Gbodpfxorfx Tno Ah Hsg Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: Gbodjiyyndopfx Ah Hog > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. Gjdpfx Ahjlf H Tco Hobg * Technical data will follow shortly * For self-dismantling and collection.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Control: FANUC 18i-MB Travel paths X / Y / Z: 1'020 / 510 / 510 mm Feed X / Y / Z: 1 - 10'000 mm/min Rapid traverse X / Y / Z: 48'000 mm/min Table size W x D: 1'200 x 510 mm Spindle speed: 15'000 rpm Internal cooling: 20 bar Tool holder: BT 40 Tool changer: 48 places Gjdpfx Ahotz T Smj Hjbg Weight: approx. 7,500 kg Dimensions W x D x H: about 3,100 x 2,200 x 2,900 Meter Hours: Spindelhours: 9'310 Accessories: RENISHAW tool measurement type: OMP 40, coolant tank, machine manual, machine light, chip conveyor

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Godoh A Sfdspfx Ah Hjbg Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: excellent (used), functionality: fully functional, Armature Screwdriver Powasert ADS SE 1 - Automatic screwdriving Gjdpsw H Dzlefx Ah Hsbg - Depth control shut-off - Automatic screw feeding - Pneumatic clamping device - Machine stand - Support roller conveyor with right support leg - Support roller conveyor with left support leg