Used Amis Altkabel-Aufbereitungsanlage for sale (372)

Condition: new, machine/vehicle number: AMIS Kabelaufbereitung, System consisting of a granulator, sorting table for separating liberated plastic and copper granulate, extraction unit, and control cabinet. Each component is pre-assembled as a transportable element on base plates. Advantages of the compact system: low overall height, minimal space requirements, component arrangement designed for easy cleaning and maintenance, short installation time, and last but not least, attractive pricing. Kjdpfoyr Ti Ujx Anujnc

Year of construction: 2022, condition: ready for operation (used), overall weight: 1,140 kg, Plastic processing machine manufactured in 2022. This Other AMIS GSE 300/600 features a rotor diameter of 300 mm and a rotor width of 600 mm, designed for high-speed recycling of plastic waste. It has a feed opening of 400 x 590 mm and a throughput rate of approximately 150 – 250 kg/h, depending on material type. If you are looking to get high-quality plastic recycling capabilities, consider the Other AMIS GSE 300/600 machine we have for sale. Contact us for further details. • Rotor diameter: 300 mm Knedpfxjz E R Rxe Anusc • Rotor width: 600 mm (actual cutting length: 590 mm) • Drive capacity (motor): 11 kW or 15 kW (depending on application) • Feed opening: 400 x 590 mm • Throughput rate: Approx. 150–250 kg/h (material and screen size dependent) • Rotor knives: 3 rows, V-cut geometry (3 x 2 segmented knives) • Stator knives: 2 rows, reversible with dual cutting edges • Standard screen mesh: > 6 mm (interchangeable; multiple sizes available)

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request. Kjdpezhbf Ijfx Anusnc

Condition: used, Year of construction: 2013, We are offering this used AMIS ZBP 400 briquetting press, manufactured in 2013. We also include a Forst ARJES ZWS 110 wood shredder with a conveyor belt. However, these can also be sold separately. Amis Manufacturer: Amis Model: ZBP 400 Year of manufacture: 2013 Condition: used Machine type: Briquetting press Kjdpfxozp Eyfo Anujnc Forst Shredder ZWS 110 with 30 kW motor 20 mm screen with electrical system with segmented base and slide with toothed rail Slide with roller guide Preparation for conveyor belt discharge Inclined conveyor belt AA = 1700 horizontal AA = 4500 vertical Belt width = 580 mm with PVC belt with metal-free zone with 1.5 kW drive If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2019, operating hours: 39 h, functionality: fully functional, machine/vehicle number: MZ-7321/19 / 11024, total height: 2,198 mm, total width: 1,648 mm, total length: 3,500 mm, overall weight: 3,500 kg, rotor diameter: 400 mm, rotor width: 850 mm, type of input current: AC, input voltage: 400 V, rotational speed (max.): 100 rpm, power: 30 kW (40.79 HP), As-new single-shaft shredder / size reduction system with minor signs of use. Used solely for testing purposes. The rotor shaft is equipped with a heavy-duty wear protection. Cassette system for rotor knives, 34 x 34 mm. Electric motor 30 kW, total installed power 37 kW, hydraulic power 3.75 kW, 400 V, 3-phase. Additional new rotor and stator knives included as spare parts. German operating manual. Three-part, adjustable stator knives. Hopper lockable, perforated screen 40 mm. The machine can be demonstrated under power. No warranty after purchase. Free loading from factory premises – Raesfeld. Detailed photos available on request. Subject to prior sale. Prices are net prices. Knjdpfsy E S S Asx Anusc

Condition: like new (used), complete briquetting system, from automatic feeding to packaging press, 30 kW Kjdpfoz Ritwex Anuonc

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Knjdpfjufi Rxox Anuec Stator blades: 2 plus blade set: 2 Blade setting table

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls Kjdsu R Sxxopfx Anujnc - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 Knodpfxszyu Nqj Anujc • Serial number: 801213 • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises. Ksdpsyr I Hnofx Anusnc

Condition: used, machine/vehicle number: 14088,

Condition: used, Year of construction: 2012 Dimensions (LxBxH): 430 x 110 x 270 cm Serial number: 2CG048283 Model: HBBXATXXX Belt speed: max. 1.1 m/s Container diameter: 40–90 mm; transportable up to 150 mm with wide transport containers Height adjustment: Minimum container height: 80 mm Maximum container height: 300 mm Operation: via PILOT Container transport: single-track, horizontally aligned Dimensions (LxWxH): 4300x1100x2700 mm Kedpfx Anjz Tgkxeujnc Online auction of high quality food industry processing equipment (e.g. STEPHAN mixing, HEMA, BOSCH piston filling, HEUFT x-ray inspection, NETZSCH pumps, PRASMATIC, PAGO packaging and labelling etc.), various mustard mills, rotary sieves and further universal processing equipment due to the plant closure of the renowned tube, glass and bottled mustard and mayonnaise manufacturer at Neuss near Dusseldorf in Germany. The online auction opens Friday 16 October and closes Tuesday 3 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 29 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2007, Delivery Palamides Delta 502 Knodpfjy Iv Nqsx Anuoc Year: 2007 - Vertical stacker - bundler - Banding device(s): 2 Voltage 220 volts or 380 volts (transformer)

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit in case of furnace overheating. * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. -Log of all operations and alarms. -Program < EASY MAINTENANCE > for vacuum pumps. -Delayed start of the process (for night use) -kW meter. -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame. Knjdpez Ihiksfx Anusc

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, L & Z Lathe KAMI DKM 410 L incl. digital display & accessories -UNUSED -CE marking -Digital display for 3 axes -Center height 205mm -Swing over bed 410mm -Swing over cross slide 530mm -Swing over carriage 240mm -Distance between centers 1000mm -Spindle bore 52mm -Speed range (geared) 55 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch etc. -Tailstock spindle diameter 32 -Tailstock spindle taper MK 4 -Work light -Electric chuck guard -Four-way tool post -Three-jaw chuck 200mm -Four-jaw chuck -Chip guard -Chip drawer -Storage compartments & tools -Faceplate -Documentation Knedpfsz S Du Sjx Anuec Dimensions L x W x H 1.9 x 0.8 x 1.6 meters / Weight 890 KG Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1303, total width: 4,400 mm, total length: 3,300 mm, total height: 1,700 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 3,210 mm, feed length Y-axis: 3,300 mm, cutting length (max.): 3,300 mm, We offer this Hegla VSG-M 33 MT laminated glass cutting table, which is in very good condition and was manufactured in 2005. Manufacturer: Hegla Model: VSG-M 33 MT Kedpfx Asz Hl T Ronusnc Year of manufacture: 2005 Condition: very good ID Category: 518 ID Machine Type: 898 Type: laminated glass cutting table If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 08011887520 CR, overall weight: 700 kg, type of input current: AC, input voltage: 400 V, total length: 2,250 mm, total width: 1,280 mm, total height: 1,450 mm, stack height: 500 mm, compressed air connection: 8 bar, working width: 520 mm, temperature: 150 °C, power of vacuum pump: 9,000 W, Equipment: CE marking, FORMICA Foliant 520 from 2008, in very good condition and available for sale. The machine has been well maintained and carefully operated throughout its service life. It has only been used for a few hours per day on average, resulting in limited usage and a well-preserved overall condition. The FORMICA Foliant 520 is in very good working condition and is ready for continued professional production. Regular maintenance and careful operation have ensured reliable performance. Machine highlights: Manufacturer: FORMICA Model: Foliant 520 Year of manufacture: 2008 Very good overall condition Well maintained Knsdpfoz Hnkrex Anuoc Limited daily operating hours Carefully operated Ready for continued production Inspection possible by appointment The machine represents a good opportunity to acquire a well-maintained FORMICA Foliant 520 from 2008, suitable for professional production and ready for further use. Further technical specifications, photographs and additional information are available upon request.

Condition: like new (used), Year of construction: 2009, ABB AMI 630L6A BAFH – 4800 kW (4.8 MW) electric motor – 2009 – UNUSED For sale: an industrial ABB AMI 630L6A BAFH electric motor with a power rating of 4800 kW (4.8 MW), manufactured in 2009 by ABB Oy in Helsinki, Finland. The motor is unused and comes from stock, preserved in very good visual condition. The unit has the original manufacturer's nameplate and a complete housing with a cooling system. The motor is designed for the most demanding industrial applications, requiring high power, high reliability, and continuous operation. Technical data: * Manufacturer: ABB Oy, Finland * Model: AMI 630L6A BAFH * Year of manufacture: 2009 * Condition: unused * Power: 4800 kW / 4.8 MW * Voltage: 3300 V * Current: 988 A * Rotational speed: 992.6 rpm * Frequency: 50 Hz * Power factor: 0.88 * Number of phases: 3 * Winding connection: delta (D) * Insulation class: F * Protection class: IP55 Ksdpoz N Tddsfx Anuonc * Operating mode: S1 – continuous duty * Cooling system: IC611 * Mounting method: IM1001 * Power supply: ABB ACS 1000 frequency converter * Weight: 14,250 kg * Serial number: 4598458 * Identification number: 323FN400M01 * Standard: IEC 60034-1 Application The motor can be used in large industrial installations: * High-performance industrial pumps * Compressors * High-power industrial fans * Power industry * Steel and metallurgical plants * Chemical and petrochemical industry * Mining and extraction industry * Drives for heavy industrial machinery Condition of the unit The motor is unused and has been stored since purchase. The unit is in very good visual condition. Only minor signs of storage and transport are visible. Includes an integrated cooling system and connection elements. Due to the long storage period, it is recommended to check the condition of the insulation, bearings, and lubrication system before the first start-up. Transport and sale The unit weighs 14.25 tons. Professional loading and transport can be arranged within Poland and throughout Europe. Additional information and photos are available upon request. Please contact us for a price quote.

Condition: used, machine/vehicle number: 10460,

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Manufactured in 2003, this machine remains in excellent technical condition thanks to proper maintenance and care. It offers a versatile configuration with a working width of 1,900 mm. The line is equipped with: • Raw material unwinding stations • J-box for face materials • Powder scattering unit • IR heating station • Lamination head • Cooling system • Tension control system • Central winding unit A key feature is the additional upper pressing roller, which enables the production of 3-ply laminated composites in a single pass. Kodpfx Aoz E S H Ijnusnc Depending on the application, the machine can bond layers using thermoplastic adhesive supplied in roll form, thermoplastic powder, or a combination of both.

Condition: used,

Condition: used, machine/vehicle number: 9394, Year of manufacture: 2015 Technical Data: Knodpfx Asyr Tlisnuoc Main dimensions (length/height/width): 1430/1730/780 mm Discharge opening diameter: 102 mm Number of knives and blades: 3+1+9 Drive: 22 kW Total machine weight: approx. 400 kg Possible screen perforations: Ø 4–25 mm

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m Knedpfxoz E S Hhs Anuoc We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: used, machine/vehicle number: 14002,

Condition: good (used), For sale: CRATHERN, PERONDI IA630, with a capacity of 900. Knsdsz Sat Ejpfx Anusc