Used Autefa Cross-Layer for sale (5,145)

Condition: ready for operation (used), Year of construction: 1992, A dismantled Autefa compensating stacker is available. Working width: 3000mm, working speed: 60m/min. On-site inspection is possible. Hjdpfjwwvw Tjx Ah Sjnt

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Hsdpfxszp H R Ee Ah Sent Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 1990, condition: ready for operation (used), A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 - WebMax, year of construction: 2006, min. fineness range: 0.7dtex, fiber types: chemical/natural/regenerated/blends, max. web weight: 100g/m², max. web weight with crosslapper: 5000g/m², max. laying width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, lapper lift: 100mm, machine dimensions X/Y/Z: approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions X/Y/Z: approx. 1600mm/3650mm/1650mm. 7) Double needle loom Dilo CBF 31/HVSL 31, year of construction: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, number of needles per 1m working width: approx. 15430, machine dimensions X/Y/Z: approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Web accumulator Suchy WOB 3200, storage volume: 40m³, web weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller top width: 3200mm, machine dimensions X/Y/Z: approx. 4300mm/5050mm/5300mm. 9) Slitting unit Suchy, year of construction: 2006, weight: approx. 250kg. 10) Climbing roll winder, winding roller diameter: 350mm, min. winding diameter: 3inch, max. winding diameter: 1500mm. 11) Edge trimmer Hepp-Schwamborn. 12) X-ray measuring device Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation available. An on-site inspection is possible. Expected to be available from the end of March 2026. Hedpfx Ahoymfc As Sont

Condition: used, Year of construction: 1986, functionality: fully functional, AUTEFA Bale Press LIFT BOX Hodpfx Ajytb Sgsh Ssnt - semi-automatic bale press - 2-chamber system - pre-press - final press - automatic TITAN strapping machine - control unit renewed in 2015 - hydraulics completely renewed in 2018 - condenser new in 2012 - fork bale removal trolley - transport segments (roller conveyors) - turntable - roller conveyor scale - roller conveyor lift table - packaging material - bale size WxLxH 1250x750x1100 mm - bale weight approx. 330 kg - daily throughput 25-30 t System available 2x (price per unit) Please note that disassembly, packing, and shipping/collection must be carried out by the buyer.

Condition: like new (used), Range (depending on lighting conditions): up to 15 m Range with laser receiver: 30 m and more Leveling accuracy at 5 m: +/- 1 mm Self-leveling range: 4° +- 0.5° Accuracy of the horizontal line at 5 m: +- 1.5 mm Accuracy of the vertical line at 3 m: +- 0.75 mm Hnsdpfx Ajd Ecncjh Sjt Number of laser lines: 2 Weight: 485 g

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM Hnedefv Hphspfx Ah Set The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 926 h, functionality: fully functional, machine/vehicle number: 546324, saw blade diameter: 500 mm, cutting width (max.): 300 mm, overall weight: 1,500 kg, saw blade length: 7,209 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. saw blade length: 7,209 mm Max. saw width: 300 mm Max. saw blade diameter: 500 mm Arbor saw blade diameter: 85 mm Infeed table length: 7,850 mm Outfeed table length: 2,400 mm MACHINE DETAILS Voltage: 400 V Current consumption: 22 A Fuse: 25 A Main motor power: 7.5 kW Connected power: 11 kW Dimensions & Weight Dimensions (L x W x H): 11,250 x 900 x 1,800 mm Weight: 1,500 kg Hedpezzbfbofx Ah Sjnt Operating hours: 926 h EQUIPMENT CE marking

Condition: used, functionality: fully functional, power: 650 kW (883.75 HP), total length: 48,000 mm, total width: 8,720 mm, total height: 6,464 mm, Year of construction: 2019, HIGH-CAPACITY 3-LAYER CO-EXTRUSION FLAT SHEET LINE (2100 mm) Manufacturer: FONG KEE INTERNATIONAL MACHINERY CO., LTD. (Taiwan) Model: TSE-90/150/150-2400 Year of Manufacture: 2019 Condition: Used – Excellent condition, fully assembled and preserved indoors. KEY SPECIFICATIONS & PERFORMANCE: • Finished Sheet Width: Up to 2,100 mm (Net trimmed width) • Die Lip Width: 2,300 mm • Output Capacity: Up to 1,000 kg/h (depending on resin and sheet thickness) • Processable Materials: PET, PMMA, ABS, PS (HIPS / GPPS), PC, PP • Polymer Versatility: Configured for engineering thermoplastics and polyolefins (PET, PMMA, ABS, PS, PC, PP sheet extrusion). CO-EXTRUSION & FEED SYSTEM: • Configuration: 3-Layer Co-Extrusion (A/B/A or A/B/C) • Extruders: - Extruder A: Ø 90 mm - Extruder B: Ø 150 mm - Extruder C: Ø 150 mm • Melt Delivery: MAAG Gear Melt Pumps with Dynisco pressure transducers for ultra-stable flow • Extrusion Die: EDI (Nordson) Ultraflex HRC100-FB (2,300 mm, Made in USA) with Fast Gap patent adjustment CALENDER & DOWNSTREAM PROCESSING: • Polishing Stack: 3-Roll horizontal calender with high-precision mirror-finished rolls • Additional Roll Included: Dedicated Matte Calender Roll included with the line • Surface Finish Capabilities: Both High-Gloss / Mirror Optical Grade and Anti-Glare / Matte Finish • Temperature Control: Multi-zone thermoregulation units (TCU) • Protection: In-line dual-side protective masking film application unit • Cutting & Stacking: High-speed automated cross-cutter and automatic sheet stacker unit • Winding: In-line heavy-duty rewinder unit ELECTRICAL, DRIVES & AUTOMATION: • PLC System: Siemens SIMATIC (ET 200SP) with intuitive touchscreen HMI • Frequency Inverters: Siemens Sinamics G120 drive system • Main Electrical Switchgear: Schneider Electric • Cabinets: Independent air-conditioned industrial electrical enclosures FACILITY & FOOTPRINT: • Total Line Length: Approx. 48.0 m Hsdpfxjzzdnfe Ah Ssnt • Total Line Width: Approx. 8.7 m • Connected Drive Power: Approx. 650 kW (988 A) • Layout Drawing: Full technical CAD layout available upon request. CURRENT STATUS & INSPECTION: • Condition: Fully assembled, idle, and preserved indoors within a controlled industrial environment. • Availability: The complete line is immediately available for professional on-site visual inspection upon request. • Reason for Sale: Facility line reconfiguration.

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland Hodpfx Ahszrnt Hs Sent – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), SCM internships in excellent condition Hjdpfx Ajt Hkq Rsh Sent

Condition: used, clear span: 2,700 mm, load per truss pair (max.): 4,250 kg, Technical data for the pallet racking crossbeam: Racking system: Bito Type: PRO Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Crossbeam type: PT150M Box profile: 150 x 50 mm Hnjdpoz Ay Scofx Ah Sot Clip: 5 hooks Clear width: 2,700 mm Max. load per crossbeam pair: 4,250 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional lifting out General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Hedevu Hd Tspfx Ah Sent Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Hnsdpfx Aowb Hxvoh Sst Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 89257, saw blade diameter: 450 mm, cutting height (max.): 150 mm, cutting width (max.): 250 mm, type of input current: three-phase, year of last overhaul: 2024, table length: 25,000 mm, A woodworking company in Latvia is offering a Weinig Dimter OptiCut 304 L optimization cross-cutting line for sale. The machine has had only two owners, both of which are well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated on one shift. It is equipped with 5 sorting cylinders; however, the sorting conveyor can be extended, and additional sorting cylinders can be installed if required. Hnedpoz Arqkjfx Ah Sst The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity, profitability, and high-quality optimization results. The machine operates with excellent accuracy. No modifications have been made to the original factory configuration. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig finger-jointing line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information, or additional images and videos can be made available.

Condition: used, Year of construction: 1999, functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 2,500 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, Equipment: saw blade guard, Double-blade panel saw, Eima Type 122 Cutting width, min/max: 210-2500 mm Cutting depth: 2500 mm Hsdpfx Aozwkrvsh Sent Maximum blade diameter: 400 mm Cutting height: ~100 mm Motor power: 2 x 4.4 kW Electronic cutting width adjustment

Condition: used, table length 750 mm Hnodpjzzrbmefx Ah Sst table width 425 mm table surface area 600 x 320 mm x-travel 400 mm y-travel 280 mm - 2 pieces on stock -

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 5,700 mm, total width: 2,300 mm, Colour: White Weight: 2.000 kg Hnjdpfezmxvzox Ah Sot - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 10.7488 - Main motor power [kW]: 6.3 - Max. saw length [mm]: 5200 - Max. saw width [mm]: 360 - Max. saw blade diameter [mm]: 600 - Input table length [mm]: 5200 - Output table length [mm]: 3300 - Options: Automatic pusher system - Transport dimensions: 5700mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, table length 605 mm table width 250 mm weight ca. 40.0 kg Current list price: approx. 3.000 euros Special price available upon request Hnedpozzrf Ejfx Ah Set Features - Sturdy / solid cross table - From an ALZMETALL column drill press - Machined clamping surface: 605 x 250 mm - Maximum travel: 600 mm - Adjustment range: 0.05 mm

Condition: excellent (used), functionality: fully functional, maximum cutting width 250 mm feed table length 3 m Hnedpszz N Nzefx Ah Sot outfeed table length 3 m year of manufacture 2003 motor power approx. 2.2 kW power supply 400 V weight 600 kg

Condition: excellent (used), functionality: fully functional, power: 55 kW (74.78 HP), type of input current: three-phase, For sale: 4 high-performance drum-type grinders/refiners. Price is per unit. Two are blue; two are orange (model RM800.7). All machines are in good working order. Hjdpfx Ahjzz Sh He Sjnt

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 13100019, type of input current: three-phase, overall weight: 1,000 kg, For sale: a professional log edging saw (optimizing saw) from the renowned German company Winter Holztechnik, model Optimax 100. The machine is fully functional, regularly serviced, and ready for immediate operation. It is ideally suited for the fast and precise removal of defects and the preparation of elements with fixed lengths in joinery workshops. Key features and advantages: PLC control: Intuitive touchscreen panel for easy programming. Multifunctionality: Capability for sequential cutting (memory for up to 10 dimensions) and cutting lines marked with fluorescent chalk. Efficiency: The machine can replace the work of several people, offering a speed of up to 80 cycles per minute. Precision: Very high cutting accuracy of +/- 1 mm. Technical data: Hsdpfxozzw Ulo Ah Sjnt Saw motor power: 7.5 kW. Feed motor power: 2.0 kW (feed speed continuously adjustable up to 80 m/min). Cutting height: max. 100 mm. Blade diameter: Ø 455 mm (bore 30 mm). Minimum material length: 300 mm. Power supply/Air: 400V / 8 bar.

Condition: used, Grecon Dimter Opticut 704 Optimizing Saw Hodpszvyk Sefx Ah Sont An optimizing saw for demanding applications. A continuous chain transport system with a flexible upper clamping device, from the measuring station to the saw, ensures safe transport of wood that is tapering, twisted, heavily rough after sanding, and prone to splitting. A servomotor with a planetary gearbox provides very high acceleration due to its low moment of inertia. Waste is blown to the side in the cutting area. Thanks to its special design with an aluminum casting and a pneumatically controlled saw swing, very short cutting times are possible. The output is approximately 12,000–17,000 running meters per shift, with maximum cross-sections of the material being processed ranging from 100 × 100 mm to 30 × 250 mm.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 483, Feeder, layer feeder Capable of feeding sheet material, boards, etc., in stacks... Conveyor belt 3900×1350 mm Total length 175 cm Width 390 cm Height 150 cm Weight 500 kg Hnsdez A Suyopfx Ah Sjt Max. stack height 11 cm But can be modified

Condition: used, total height: 1,550 mm, total length: 7,900 mm, total width: 2,350 mm, Weight: 1.500 kg - Documentation available: No - CE certificate present: No - Max. saw length [mm]: 6000 - Max. saw height [mm]: 230 - Input table length [mm]: 6000 - Options: Automatic pusher system - Transport dimensions: 7900mm x 2350mm x 1550mm (l x w x h) - Transport weight [kg]: 1500kg Hjdpfsxixh Asx Ah Sent - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2016, total height: 1,600 mm, total length: 14,100 mm, total width: 1,600 mm, Colour: Grey Weight: 2.500 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6237 - Max. saw length [mm]: 6500 - Max. saw width [mm]: 400 - Max. saw height [mm]: 135 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 6700 - Output table length [mm]: 6000 - Options: Automatic pusher system - Voltage [V]: 415 - Current consumption [A]: 20 - Transport dimensions: 14100mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT Hnsdpewnh N Nefx Ah Sst VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels