Used Balzers Duo 035 D for sale (46,338)

Condition: not inspected (used), functionality: unexamined, Balzers Mod: Duo 035 D Djdownm Udopfx Ap Doku Model No: PK D45 602 For further data, see the type plate illustration, the device is untested.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: PP W31 000/X2156 / PK D46 602 / PK Z40 150, Pfeiffer Vacuum Pumps Types: Djdowm H Sgopfx Ap Deku WKP 500 A DUO 065 D ONF 035/065 D Modules are untested.

Condition: not inspected (used), functionality: unexamined, Pfeiffer Vacuum Mod: Duo 65 Mod.-No: PK D46 602 Mod: ONF 035/065 D Mod.-No: PK Z40 150 For further data see the nameplate, device is untested. Dedpfx Apswnm Tms Doku

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 860 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, feed length X-axis: 630 mm, feed length Y-axis: 730 mm, feed length Z-axis: 860 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, nominal power (apparent): 70 kVA, torque: 1,400 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 640 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 290 kg, total height: 3,650 mm, total length: 5,650 mm, total width: 3,560 mm, table width: 400 mm, table length: 400 mm, table load: 290 kg, rotational speed (max.): 80 rpm, overall weight: 25,000 kg, distance between spindles: 720 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, For sale is a high-performance, two-spindle CNC machining center, MAG SPECHT 500 DUO LIMO PW, manufactured in 2017, with a pallet changer, two working spindles, and 5-axis machining capabilities. The machine has been used infrequently recently and is currently not in active production. It remains connected to the power grid, so an inspection while powered on is possible by appointment. Manufacturer: MAG / FFG Model: MAG SPECHT 500 DUO LIMO PW Year of manufacture: 2017 Condition: very good (original images dated September 15, 2026) Operating hours: 17,690 h Category ID: 1458 Type ID: 4166 Machine type: Universal machining center Technical data: Year of manufacture: 2017 Machine number: X.0112.6258 Control system: Siemens 840D SL Number of spindles: 2 Machining: 5-axis Design: LIMO PW Pallet changer Tool holder: HSK-A63 Travel in X: 630 mm Travel in Y: 730 mm Travel in Z: 860 mm Axis speed X/Y/Z: up to 120 m/min Spindle distance: 720 mm B-/A-axis: up to 80 rpm B-axis division: 360° x 0.001° Pallet size: 400 x 400 mm Table/pallet load: 2 x 290 kg Max. weight moment at 90°: 1,400 Nm Max. workpiece and fixture height with pallet changer: 640 mm Max. clearance circle workpiece/fixture: 2 x 700 mm Tool magazine: 112 tool positions for HSK-A63 Tool diameter with full load: 75 mm Tool diameter with empty spaces: 230 mm Max. tool length: 550 mm Max. tool weight: 12 kg Total weight of tools in the magazine: max. 420 kg Accuracy / Measuring system: Linear measuring system X/Y/Z: 0.0001 mm Positional accuracy: 0.005 mm Positional repeatability: 0.004 mm Machine dimensions: Width: approx. 3,560 mm Length: approx. 5,650 mm Dksdpjz Ar E Isfx Ap Dsu Height: approx. 3,650 mm Machine weight: approx. 22,000–25,000 kg Electrical rated power according to nameplate: 70 kVA Operating voltage: 400 V / 50 Hz If you have any questions or need more information, please send us a message or call us. Inspection while powered on is possible by appointment in 36199 Rotenburg an der Fulda. Technical documentation is available. Sale from the current location. Dismantling, loading, and transport can be arranged. Subject to prior sale, errors, and changes in technical specifications.

Condition: excellent (used), Year of construction: 2024, ENGEL DUO 36060/2700 TECH INJECTION MOLDING MACHINE Year of manufacture: 2024 Clamping force: 27,000 kN (2700 tons) Robot: ENGEL VIPER 90 CLAMPING UNIT Clamping force: 27,000 kN Mold opening stroke: 3300 mm Maximum mold opening distance: 4100 mm Minimum mold height: 800 mm Maximum mold height: 2200 mm Column spacing (H × V): 2180 × 1750 mm Platen dimensions (H × V): 2970 × 2640 mm Opening force: 770 kN Opening force with hydraulic cushion: 1600 kN Dry cycle time (EUROMAP 6): 5.6 s INJECTION UNIT Dkodsz N Et Djpfx Ap Dsu Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Injection volume: 24,100 cm³ Theoretical injection weight (PS): approx. 21.9 kg Injection rate: 2620 cm³/s Injection pressure (regenerative mode): 1300 bar Maximum injection pressure: 1600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Torque at maximum speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s INJECTION NOZZLE Nozzle stroke: 1300 mm Nozzle closing force: 210 kN EJECTION SYSTEM Ejector stroke: 400 mm Ejector forward force: 420 kN Ejector return force: 420 kN HEATING SYSTEM Number of heating zones (including nozzle): 12 Installed heating power: 160.9 kW DRIVE AND HYDRAULIC SYSTEM Installed motor power: 355 kW Motor power for charging pump: 3 kW Hydraulic oil tank capacity: 3500 l COOLING SYSTEM Required cooling capacity: 66.9 kW Water consumption (supply temperature 32°C): 5.88 m³/h ADDITIONAL EQUIPMENT Linear robot: ENGEL VIPER 90 Movable / pull-out guide column Hot runner control: 160 zones Hydraulic core control: 3 + 3 Cascade control: 72 channels

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer Dedszlbqrspfx Ap Doku - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Dkodpfx Aez Eq Epsp Deu Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: used, Year of construction: 2018, travel distance X-axis: 510 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 70 m/min, rapid traverse Z-axis: 70 m/min, feed length X-axis: 510 mm, feed length Y-axis: 600 mm, feed length Z-axis: 700 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 70 m/min, nominal power (apparent): 63 kVA, torque: 900 Nm, workpiece height (max.): 490 mm, workpiece diameter (max.): 535 mm, workpiece weight (max.): 200 kg, total height: 3,470 mm, total length: 4,150 mm, total width: 3,120 mm, table load: 200 kg, rotary table diameter: 450 mm, rotational speed (max.): 80 rpm, overall weight: 18,000 kg, distance between spindles: 540 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this very well-maintained, twin-spindle, 5-axis machining center, MAG SPECHT 450 DUO, manufactured in 2018. Manufacturer: MAG / FFG Machine Type: SPECHT 450 DUO Year of Construction: 2018 Condition: very good Operating Hours: 15,908 hours Machine Number: X.0112.6552 Order Number: E.7500194.001 Wiring Diagram Number: E.7500194.001 Location: 36199 Rotenburg an der Fulda, Germany Inspection: possible under power The machine is designed as a highly productive, twin-spindle machining center for series production and features 5-axis machining, two working spindles, and HSK-A63 tool holders. Technical Data: Year of Construction: 2018 Machine Number: X.0112.6552 Number of Spindles: 2 Machining: 5-axis Tool Holder: HSK-A63 Travel X: 510 mm Travel Y: 600 mm Travel Z: 660 / 700 mm Axis Speed X/Y/Z: up to 70 m/min Spindle Distance: 540 mm B-/A-Axis: up to 80 rpm B-Axis Division: 360° x 0.001° Table Plate Diameter: 2 x 450 mm Table Load: 2 x 200 kg Max. Interference Diameter of Workpiece/Fixture: 2 x 535 mm Max. Workpiece and Fixture Height: 490 mm Max. Weight Moment at 90°: 900 Nm Tool Magazine: 112 tool positions HSK 63 Tool Diameter with Full Load: 75 mm Tool Diameter with Empty Spaces: 140 mm Max. Tool Length: 550 mm with front loading Max. Tool Weight: 12 kg Total Weight of Tools in Magazine: max. 420 kg Accuracy / Measuring System: Path Measuring System X/Y/Z: 0.0001 mm Positional Accuracy: 0.005 mm Positional Repeatability: 0.004 mm Machine Dimensions: Width: approx. 3,120 mm Length: approx. 4,150 mm Height: approx. 3,470 mm Machine Weight: approx. 16,000–18,000 kg Electrical Rated Power according to Nameplate: 63 kVA Operating Voltage: 400 V / 50 Hz Dkedez Ar H Sjpfx Ap Deu The machine can be inspected under power at the Rotenburg an der Fulda location by appointment. Technical documentation is available. Sale from location. Subject to prior sale and errors in the technical data.

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Equipment: - Interface for rotary table/index plates - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits Dedpoz Nkavjfx Ap Dsku - 6 additional vacuum circuits

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: Dkedpfxoyw Aa Us Ap Deu - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection unit Two short-barrel cylinders for plastic injection. Direct screw drive; ceramic heaters on cylinders. Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Increased specific injection pressure: 2,180 bar. Plasticizing capacity: 85 g/s (for polystyrene, screw Ø 90 mm). Injection unit equipment: M3-type barrel – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. S4V-type screw – heat-treated, chrome-plated, with armoured edges; increased resistance to corrosion and wear. Special G11.3 screw geometry optimized for processing. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping unit (clamping system) Hydromechanical dual-platen clamping system. Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two diagonally mounted fast movement cylinders on the clamp unit. Opening stroke dependent on mould height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Mould mounting platen dimensions: 1,850 × 1,810 mm. Tie bar spacing: 1,400 × 1,150 mm. Mould mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mould cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special execution of platens with additional holes for ejector systems in two arrangements (horizontal and vertical). Core pull drives (core pull systems) Independent hydraulic core pull drives: 2 units on the moving platen, 2 units on the fixed platen. Hydraulic pressure reduction systems for core pulls. Independent pneumatic core pull drive on the moving and fixed platens. Dsdpew U Taxofx Ap Djku Hydraulics Pump station with electrohydraulic pressure and flow regulated pumps, and fixed delivery pumps. Energy-saving proportional hydraulics with precise flow and pressure control. Servo valve for injection speed, holding pressure, and back pressure control. ECODRIVE system – energy-efficient hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot Integrated Cartesian robot, operated via CC200/RC200 control panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable up to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: 0–90° rotating gripper, pneumatic drive. B axis: rotation of head around lift axis (Y), servo motor drive, range +90° / –180°.

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° Dsdpfjw U Sz Isx Ap Dsku 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg Dsdpfx Aez Az Iasp Deku _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Robot VIPER 40 Laser Conveyor Belt

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 120 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel Dkjdezxy Szjpfx Ap Dou • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 120 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 2,30,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Dkjdpfoy Tuhiex Ap Deu Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: Dkedpfx Apeycc N Sj Dju - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 107731, Equipment: cooling unit, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. Dkedpfx Aozzc U Dop Deu All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 2005, operating hours: 40,403 h, functionality: fully functional, Deckel Maho DMC 80H duo Block About the Machine: Extremely robust machine. Technical Specifications: - Control: Siemens 840D - Travel paths X, Y, Z axes: 800/800/800 mm - Travel path C axis: 360° - Clamping surface rotary table: 800 x 630 mm - Rapid traverse: 60 m/min - Spindle speed: 20 - 12000 rpm - Tool holder: SK50 - Tool magazine with 60 positions - Network connectivity - Automation interface available Equipment: - Internal coolant supply 50 bar with belt filter system - Work area rinsing system - Rinsing gun - Chip conveyor Inspection/Test under power at our facility is of course possible. We are pleased to offer transport, installation and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance Dkedpfxjyhwrco Ap Dou - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! From machine purchase, transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: Dksdpfxez I Tm Is Ap Dju approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X 650 Y 400 Z 420 U/V +/- 101mm, Table 901 x 660mm, max load on table 1,200kg. Dkedpszzmkiefx Ap Dou

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Dedpfox Up Rnex Ap Deku Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: used, Year of construction: 2013, x-travel 700 mm y-travel 700 mm z-travel 700 mm control 840 D sl Siemens Max. Speed Subspindle 10.000 min/-1 power capacity - main spindel 42 kW max. Torque 236 Nm tool taper HSK-A 63 DIN 69893 Number of pallet-stations 10 pos. size of pallet 500 x 500 mm max. workpiece weight 600 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm number of toolpositions 180 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 550 mm max. tool weight 12,0 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 sec rapid traverse ( X / Y / Z ) 60 m/min feed speeds max. 60.000 mm/min Accelaration x/y/z: 6 / 6 / 5 m/s² Dkodpfez I Dy Sjx Ap Dsu feed power 10 kN total power requirement 67 kW weight of the machine ca. 9,7 t dimensions of the machine ca. 7,5 x 5,0 x 2,8 m CNC - Machiningcenter Horizontal DECKEL MAHO - DMC 65 H duoBLOCK

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Dsdpszvwl Tjfx Ap Djku Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: Dkjdpszqdagsfx Ap Dsu ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Year of construction: 2002, condition: good (used), machine/vehicle number: 3298, Offer 26206 Twin-chamber blasting cabinet with material recovery and dust extraction Technical data: Dsdpfez Dt I Dox Ap Doku - 2 blasting chambers - Blasting chamber width / blasting chamber depth: 600 / 940 mm each - Workpiece access via side doors - 2 hinged viewing windows: 400 x 250 mm - 2 blasting guns - 2 electric foot switches - Material recovery system - Dust extraction system with cartridge filter - Power supply: 400 V / 3 kW - Pneumatic connection: 6 bar - Space requirement: approx. W 1500 x H 2200 x D 1600 mm - Weight: approx. 350 kg