Used Beer Keg Washer Line for sale (11,448)

Condition: new, Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 16102025, total length: 14,000 mm, total width: 4,000 mm, total height: 3,030 mm, overall weight: 3,000 kg, input voltage: 220 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 14 bar, compressed air connection: 6 bar, input current: 12 A, temperature: 10 °C, heating capacity: 3 kW (4.08 HP), power: 6 kW (8.16 HP), warranty duration: 12 months, operating pressure: 14 bar, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, documentation/manual, lighting, The KEG barrel is manually placed on the conveyor with the top down. On the control panel, the type of KEG barrel to be worked with is set and started with the “START” button. The conveyor chain also acts as a buffer - for three 30L KEG or five 10L KEG barrels. When the barrel enters the washing machine, the conveyor stops and the washing is started. The machine consists of 2 zones - washing with chemicals and the second for rinsing. The first (longest) processing zone is used for the main cleaning with chemicals. The second zone is used for rinsing. Spray pipes are fixed in each spraying zone. Along the sides, bottom and top to ensure the cleanliness of the specified Keg barrels. Washing with chemicals and adjusting the amount of its supply, as well as without chemicals, is possible. Drive rollers ensure the fixation of the barrels and their rotation during washing, brushes wash the sides of the KEG barrel, the arrangement of high-pressure nozzles ensures water supply to the brushes and washing of the bottom of the barrel. Washing of one barrel max. 1.5 min., this time can be changed depending on the degree of dirtiness of the barrels. Excess water is drained into the sewer through the overflow. After washing, the barrels are fed to the filling machine with elevators. A sensor on the line near the filling machine controls the operation of the line. If the sensor is covered, the barrel feed is stopped and is automatically resumed when the space becomes free. If at this moment the barrel is in the washing machine - the cycle is completed. If the space near the filling machine is free at the end of the washing cycle, the feed continues. If not - the barrel feed line is in standby mode. Ventilation is built into the washing machine body. Control panel: SIMATIC HMI, KTP400 Basic Controller: SIMATIC S7-1200, CPU 1214C Pump water output: Q min/max 5-13m3/h Chemical dosage – adjustable on the control panel Material used: stainless steel AISI 304 Cylinders: FESTO Kodpfx Asv Di Dnenusnc 2. Elevators: for KEG barrels Stainless steel frame Separation and ejection mechanism – pneumatic cylinders (FESTO) Chain – stainless steel • Dimensions and specifications are to be specified at the time of ordering. You can El. diagrams and drawings are submitted upon delivery of the equipment. Warranty – 12 months from the moment of signing the invoice CE Certificate

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth Knedpfx Ajz Rnu Tsnujc • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: used, Year of construction: 1998, Overview Automatic keg cleaning and filling machine M+F KEG-Technik MINOMAT A 5/4 (1998) with upstream keg outside washer M+F AW 1100 (2000). Compact single-row keg line with roller conveyors for keg infeed and discharge, for kegs with flat fitting. Output 45-50 kegs per hour. Suitable for craft and large breweries. Technical data - Manufacturer: M+F KEG-Technik - Keg cleaning and filling machine: MINOMAT A 5/4, year of manufacture 1998 - Keg outside washer: AW 1100, year of manufacture 2000 - Output: 45-50 kegs/h - Keg fitting: flat fitting - Control: Siemens S5 PLC - Power supply: 230/400 V, 50 Hz - Control voltage: 24 V DC - Operating pressure: 5.5 bar (MINOMAT A 5/4), 3.5 bar (AW 1100) - CE marked Scope of Delivery Kodpfxez Su Hrs Anuonc - Keg outside washer | M+F KEG-Technik | AW 1100 | brush washing of the keg exterior | 2000 - Keg cleaning and filling machine | M+F KEG-Technik | MINOMAT A 5/4 | automatic cleaning and filling, stainless steel enclosure with safety doors | 1998 - Roller conveyors for keg infeed and discharge - Control cabinet with operator panel Condition Still installed and under power. Inspection on site is possible by appointment. Availability Available from 16 November 2026.

Condition: used, Year of construction: 2019, Overview This keg handling package consists of a M+F Keg Technik Monomat + RMT keg washing system, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by beer taps. The system is suitable for small to medium-scale brewery operations, enabling cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Technical data - Keg washer manufacturer: M+F Keg Technik - Keg washer model: Monomat + RMT - Year of manufacture: 2019 - Capacity: approx. 12 kegs/hour - Keg filler: Included (manufacturer unknown) - System type: Semi-automatic keg washing and filling setup Equipment - Keg Technik Monomat + RMT keg washer Kedpfx Ajy D Ertonujnc - Keg filling system (standalone unit) - 195 x 30 L stainless steel kegs (Type S/A) - 39 x 50 L stainless steel kegs (Type S) - 22 x 20 L stainless steel kegs (Type A) - 22 x 10 L stainless steel kegs (Type S) - 10 x beer taps (various manufacturers)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Kedpfx Asuq Sb Sjnujnc

Condition: excellent (used), Lambrechts Monobloc 80 Keg Filling Line Kodpfx Ansz Ayh Rouonc Built in CIP for internal and external wash Infeed Outfeed Conveyors

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Knodpfxsycigks Anuec

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 Knedpfjy Rk Igsx Anuoc - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: used, Year of construction: 2016, Overview This ABE KEG COMMANDER DUAL HEAD is an automatic keg washer built in 2016 by American Beer Equipment (USA) for craft breweries. Two kegs are processed side by side in a PLC-controlled cleaning cycle, with an output of 24-30 kegs per hour. The compact stainless steel unit carries its tanks, pumps and piping in its own frame and is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: KEG COMMANDER DUAL HEAD - Year of manufacture: 2016 - Machine type: automatic keg washer with 2 washing stations - Output: 24-30 kegs/h - Operating mode: automatic, PLC with HMI display - Tank volume: 25-30 US gal (approx. 95-115 l) - Maximum power consumption: 11.3 kW - Electrical supply: 3-phase - Feed water: min. 4.1 bar (60 psi) at approx. 57 l/min (15 gpm) - Compressed air: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Air drain pressure: 1.4-2.1 bar (20-30 psi) - CO2 supply: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Machine weight: 220 kg Equipment - Two washing stations with height-adjustable keg holders and wash heads - Control panel with HMI display, a cycle start button per station, cycle cancel and emergency stop - Integrated stainless steel tanks - Two Goulds pumps with 3-phase motors - Stainless steel piping with water and drain connections and manual ball valves Knsdpfoz Hc Ulsx Anuoc - Operator's and technical manual (English) Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 Ksdpfsz D S Sbox Anujnc - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Knedpfx Aszylxijnusc Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: excellent (used), 2 x KHS / GEA High Speed Keg Filling Lines Capacity: 1,000 kph Ksdpexcinmjfx Anusnc Sizes: 15L, 20L, 30L, 50L 60L Keg Palletiser System also available. Location: Dublin Please contact Indassol for further details & pricing.

Condition: excellent (used), Year of construction: 2016, operating hours: 90,01,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. Knodpfxoy Uk A Ss Anusc SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Knsdpfx Anez Ri Risuoc Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Labelling Machine – ANKER Roland 8/3 For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Steam-heated for filler CIP, with disk change system, Year: 2012.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Kodpfx Anjzgayuoujnc Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Year of construction: 1986, condition: ready for operation (used), Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout. Ksdpfx Anshp N Ucsuonc

Condition: used, Year of construction: 1984, Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling. Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Operation / Control: Siemens S7-300 Ksdpfjztx Uwjx Anujnc Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Condition: used, Year of construction: 2020, Overview  This semi-automatic keg washer was manufactured in 2020 by Italian company SIFA. The Idrokeg 21 is equipped with two cleaning heads and designed for efficient steam-heated keg washing. With a capacity of up to 12 kegs per hour, it is suitable for small to medium-sized breweries. The unit is in very good condition, ready for immediate use, and comes with dedicated tanks, pumps, and cleaning features. Technical data  - Capacity: 12 kegs/hour - Cleaning stations: 2 Knjdpfx Anjxcul Djusc - Heating: Steam - Formats: S-type kegs

Condition: used, Year of construction: 1990, Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels. Additional title: Keg spraying and keg brushing Knsdpfx Anexwy H Aousc Max. capacity: 300 Kegs/h Capacity keg filling plant: 110 Kegs/h Voltage: 220/380 V Frequency: 50 Hz Length: ca. 2200 mm Width: ca. 1500 mm Formats: 30-litre and 50-litre kegs, EU format, with PU jacket Features: Spray jets, high-pressure pump, brush station, label discharge

Condition: used, Year of construction: 2019, Semi-automatic KEG system with two stations. Additional title: Keg cleaning and filling system Capacity: 30 KEG/h Power: 6 kW Current: max. 15,0 A Voltage: 400V AC Knodew Uvdyspfx Anuoc Formats: 10 L, 15 L, 20 L, 30 L, 50 L KEGs, with flat fitting Running direction: left to right Operation / Control: Control box with touchpanel, Simatic S7-300 Material: stainless steel Position: free standing Features: 2 stations, CIP station with 2 tanks, KEG infeed and outfeed roller conveyors, control cabinet with touch panel

Condition: used, Year of construction: 2016, Overview  This compact filling line for cans and bottles consists of equipment from Wildgoose, Slowbeer, Enos Euro and Millipore and is designed for craft beverage production with flexible batch sizes. The line combines isobaric and atmospheric filling technologies and includes semi-automatic and manual machines for filling, capping, labeling, and product filtration. The core component is a Wildgoose WG1-CE filler (2021), capable of handling both cans and bottles with integrated seaming functionality. With its modular setup, the line is particularly suitable for small to medium-scale producers, pilot production, or specialty beverages such as craft beer, kombucha, cider, or soft drinks. Knodpfxoyxr Anj Anuoc Technical Data  - Capacity: - Up to 24 units per minute (atmospheric – Wildgoose) - Up to 16 units per minute (isobaric – Wildgoose) - Additional manual / semi-automatic filling capacity depending on configuration - Formats: - 20 cl – 1.5 L (depending on machine) - Container types: - Cans and glass bottles - Application: - Beer - Craft beverages - Kombucha - Cider - Soft drinks - Filling technologies: - Isobaric filling (carbonated products) - Atmospheric filling - Manual filling - Filtration: - 3-stage microfiltration system (Millipore) - Configuration: - Modular / semi-automatic line - Condition: used, good condition Scope of Delivery - Can / Bottle Filler | Wildgoose | WG1-CE | Isobaric and atmospheric filling with integrated seaming; 16 cpm (isobaric) / 24 cpm (atmospheric); formats 33 cl / 50 cl | 2021 - Manual Bottling Machine | SCH | SCHPK6 | 6-spout manual filler; approx. 250 bottles/hour; formats 20 cl – 1.5 L | 2016 - Bottling Machine | Slowbeer | RI4 | 4-spout filler; approx. 350 bottles/hour; formats 22 cl – 1.5 L | 2012 - Labeling Machine | Enos Euro | Base | Semi-automatic labeler; approx. 28–30 units/min; formats 22 cl – 1.5 L | 2017 - Crown Capper (2x) | Slowbeer | Tap Air Corona | Pneumatic crown cappers; crown sizes 26 / 29 mm | 2012 - Microfiltration System | Millipore | 3-stage | Stainless steel construction; 3-stage filtration system | 2016 Additional Information - Seaming unit is integrated in the Wildgoose WG1-CE filler - The line allows flexible switching between can and bottle filling - Ideal for craft production with frequent product or format changes - Compact footprint and modular design  

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg Kedpfjzrihxjx Anuonc - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Kodszvaibjpfx Anujnc Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Condition: used, Linomat LN2 washer with filler, 2 active cleaning heads, Kjdpfx Aoz Ri Syenusnc Fully automatic, fully electronic KEG interior cleaning and filling machine, for different KEG sizes 15-50 L KEG, for containers 20 ltr. - Performance 35 -40 containers / h The Keganlage runs on Schlankkeg- basket fitting. Build in 1992, very good condition and fully functional, tested by Seegräber GmbH

Condition: used, Year of construction: 1986, Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet Knsdpfxeztywye Anujc Additional title: cleaning and filling Capacity: 50 keg/h Working pressure: 7 bar Voltage: 220/380 V Frequency: 50 Hz Length: 2,0 m Width: 2,0 m Height: 2,0 m Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type Operation / Control: semiautomatic Material: stainless steel construction as frame, piping and valves as well as main mechanical parts largely made of stainless steel Features: 3 internal cleaning stations, filling station caustic tank and acid tank with pumps