Used Blitz Bsd 30-75 for sale (29,674)

Condition: good (used), Compressor Blitz BSD 30-75 Overpressure 10 bar Speed 2660 Volume flow 11.3 m3/min Bsdpfxovzxklo Amnjwp

Condition: used, Year of construction: 1996, output 30 kW suction power 4.200 l/min Bwsdpsxu Ntasfx Amnsp turning speeds 5.092 U/min overpressure 10 bar dimensions of machine L x W x H 1,72 x 0,90 x 1,60 m

Condition: good (used), Compressor Blitz BSD 30-110 1 stage 2770 rpm 15800 l/min Bwodpfx Amovzxg Hsnep 10 bar

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Bedpfszcbyvjx Amnowp Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2002, Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Bsdpfx Aekvnc Sjmnewp Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approximately 250 operating hours, available for immediate delivery. - Complies with DIN EN 1539 for solvent-containing substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - JUMO dTRON 04 temperature controller - Maximum permissible solvent quantity: 19.30 g - Heating power: max. 21.78 kW, connected load 22.5 kVA, rated current 32.6 A Bsdpsiq Uv Nofx Amnjwp - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also possible as a fixed connection, in which case fuse with 35 or 50 A - Incl. 1 grid insert - Weight 550 kg - Documentation Inspection in our warehouse by appointment. Oven, industrial oven, convection oven, chamber convection oven, annealing oven, heating oven, drying oven, temperature oven, paint drying oven, solvent oven

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2007, * BPW axles * Gergen GJ-SRK 30/75K roll-off body, year of manufacture 2007 * Unladen weight: 9,500 kg -----Internal vehicle number: 10757----Errors and prior sale excepted. WhatsApp support available! Bwjdpfx Aowbyphsmnep If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Bsdpfsug Edksx Amnewp Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES:  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; Bodpfxof Aruge Amnjwp - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Version with 2 HD hose reels;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 2801816/010, We offer this used Cincinnati Talos 75-30G, manufactured in 2008. Manufacturer: Cincinnati Bwedpfx Amozg Uuysnep Model: Talos 75-30G Year of manufacture: 2008 Condition: used If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), GMN TSE 75 cdu x 200 high-speed spindle, SP: 12-18-30000 RPM, serial number: R336458, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bwsdpfxsi Eaa Hs Amnjp

Condition: ready for operation (used), Festo 559342 / EGSL-BS-75-300-20P mini slide, used, in good condition, 100% fully functional, delivery as shown in the photos. Bjdpfjx Erlpox Amnowp

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high-speed spindle, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bwsdpfx Amsi Eaa Renjp

Condition: ready for operation (used), Bosch SM 15/30-TC 1 servo module 1070075975-101 SN:001526370, used, in good condition, 100% fully functional, scope of delivery as per photos. Bwjdey Np H Ejpfx Amnjp

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm Bsdpjk Aa Ukjfx Amnewp belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Bwodpek Abuijfx Amnep Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2010, ARB669/SN240807 ,ARB820/SN260146 ,ARB798/SN202406 ,ARB777/SN182789V02 ,ARB777/SN182789V.03 ,ARB654/SN116761 , Bwsdeuyf Daepfx Amnjp ARB805/SN228296A ,ARB809/SN216338V.02 ,ARB816/SN235404 ,ARB757/SN165210V.03 ,ARB790/SN188463 ,ARB814/SN224328V.02 , ARB657/SN116712 ,ARB818/SN257017V.02 , SELOGICA

Condition: used, Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 160 mm, turning diameter over bed slide: 330 mm, swing diameter over cross slide: 160 mm, center height: 165 mm, swing diameter over bed slide: 330 mm, total length: 1,750 mm, total width: 1,350 mm, total height: 1,670 mm, overall weight: 1,300 kg, distance between centers: 750 mm, workpiece length between centers: 750 mm, For sale is a WEILER C 30 x 750 NC lathe. Machine type: C 30 X 750 Machine number: 0F 03 Year of manufacture: 2019 Machine weight: 1300 kg Design: 2 Size: small •3-jaw chuck •Various chuck jaws •11 tool holders •Tailstock •Center distance: 750 mm •Center height: 165 mm •Swinging diameter over bed: 330 mm •Swinging diameter over compound slide: 160 mm •Turning tool cross-section (height x width): 20 x 20 mm Bwodsy U Iu Sspfx Amnjp •Dimensions: -Length: 1750 mm -Width: 1350 mm -Height: 1670 mm If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and Bedpfx Amowrp Hkonowp retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 5500 € 106.15 € 30 to fix 775 mm 5 mm/s 10 mm/s 1500 mm 700 mm 2015 mm 400 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever Bedpfx Amjypbxfenewp according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6200 € 119.66 € 30 to horizontal verschiebbar 200 mm 775 mm 125x80 mm 5 mm/s 10 mm/s 1500 mm 700 mm 1800 mm 400 kg Bsdoypbv Repfx Amnowp horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Euromac hydraulic punching machine Type CX750/30/2000 Capacity 30 t Y-axis reach: 1000 mm X-axis reach: 2000 mm X-axis reach with repositioning up to 10,000 mm CNC control: Euromac Eurowin Bwsdpfxoyxmhls Amnop 6-station multitool + with 6-station die holder

Condition: good (used), Tandem cargo bike, load rollers, heavy-duty rollers, heavy-duty wheel, tires, solid rubber tires -Heavy-duty wheel: Double solid rubber tire -Tire type: 415/75-305 -Receipt: Ø 90 x 58 mm -Bolt circle: Ø 220 mm Bedpolyvcxofx Amnewp -Dimensions: Ø 415 x 215 mm Quantity: 1 piece available -Weight: 49 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, controller model: Cybelec DNC 800, bending force (max.): 175 t, distance between stands: 2,550 mm, working length: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Bending length: 3,050 mm Frame gap: 2,550 mm MACHINE DETAILS Control unit: Cybelec DNC 800 Total power requirement: 15 kW Bedpfx Amsyhmc Tonewp Oil capacity: 300 l EQUIPMENT 2 support arms in front of the machine Pneumatic tool clamping Crowning system Controlled axes: y1, y2, x, R 2 manually adjustable backgauge fingers Two-hand foot operation Side safety doors Punch tools Segmented V-dies

Condition: new, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 106653, New ZH for KR30/60. This is a new part supplied by the manufacturer KUKA. Bedpsxzynusfx Amnswp