Used Boa 2060 for sale (557)

Condition: good (used), Year of construction: 1995, functionality: fully functional, pressing force: 70 t, filling opening width: 1,060 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 23,000 kg, noise level: 85 dB, power: 37 kW (50.31 HP), Used BOA 2060 for sale. The machine is currently stored in Belgium. It has been operational up until now and is currently disconnected. The machine is sold as-is, but a possible overhaul can be offered upon request. Bljdjya Uwpjpfx Abtol Technical data: Drive: 37 kW Pressing force: 70 tons Bale dimensions: 1100 x 720 mm Number of wires: 4 vertical, 2 horizontal Filling hopper dimensions: 1500 x 1060 mm Bale weight: approximately 500 kg (depending on material) Capacity: up to 14 tons per hour (depending on material) Press weight: 23,000 kg

Condition: good (used), functionality: fully functional, Main motor and two hydraulic pumps for a BOA hydraulic press, in good condition, for sale. The machine was taken out of service due to an electrical fault in the control system. Afterwards, the components mentioned above were removed, as they are still fully functional. Please contact me privately for further information. Bljdszxzcbspfx Abtsl

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Bljdpjznm H Defx Abtol

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, overall weight: 43,000 kg, warranty duration: 6 months, pressure: 280 bar, oil tank capacity: 2,450 l, power: 110 kW (149.56 HP), year of last overhaul: 2026, This Impress D130-A-110 kW press is in new condition and has been completely refurbished. The press has been completely rebuilt, with almost all parts replaced by new components. Only the frame and some mechanical parts are still part of the original assembly. Bsdpfxey Tm H Rs Abtoll The main cylinder has been completely overhauled. In addition, all electrical components and the entire hydraulic control system have been replaced with new parts. The control panel is also completely new, ensuring maximum reliability, safety, and operational certainty. The standard configuration of this machine features horizontal strapping. Thanks to the prepared frame, this press can also be supplied with both horizontal and vertical strapping, making the machine flexible for use with various material flows. Applications: Paper and cardboard, mixed streams, plastic films, PET bottles, containers, (long) agricultural films, plastic tanks, car tires and bumpers, and much more. As you have come to expect from BOA, this used machine can also be supplied with technical support, parts supply, and expert advice.

Condition: good (used), Year of construction: 2009, functionality: fully functional, pressing force: 61 t, filling opening width: 1,420 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, total width: 2,085 mm, total length: 8,740 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 18,000 kg, pressure: 280 bar, oil tank capacity: 800 l, power: 22 kW (29.91 HP), Used Baseline 60 machine for sale. The machine underwent its last maintenance check in March 2026, during which no significant issues were identified. The machine is fully functional and has since been taken out of production. It is in good condition and is currently located in France. Technical specifications of the machine: Year of construction: 2009 Main pump drive: 22 kW Needle drive: 4 kW Filter pump: 2.2 kW Oil cooler: 1.5 kW Working pressure: 280 bar Oil tank capacity: 800 L Pressing force: 61 tons Specific pressing pressure: 7.7 kg/cm2 Pressing stroke: 2000 mm Dimensions of pressing channel: 1100 x 720 mm Blsdpozlnb Djfx Abtol Volume of pressing chamber: 1.6 m3 Bale length (adjustable): 1300 mm Bale weight (approximate): up to approx. 500 kg Number of binding wires: 5 vertical Dimensions of feeding hopper: 1420 x 972 mm Weight of press: approx. 18 tons Noise level: < 85 dB(A) Average cycle time: 19.2 sec Capacity (depending on the material, material feed, and bale weight): 30 kg/m3: 6.9 tons/hour 60 kg/m3: 12.8 tons/hour 100 kg/m3: 19.2 tons/hour 150 kg/m3: 25.8 tons/hour

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: V302591-20, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 41,000 kg, pressure: 280 bar, oil tank capacity: 2,450 l, power: 150 kW (203.94 HP), BOA Impress D130 B 110 with side compression – used baling press, professionally maintained Are you looking for a powerful, reliable, and readily available baling press? Then this BOA Impress D130 B 110 with side compression is an excellent opportunity. We acquired this press as a trade-in. The previous owner, a customer in England, used this BOA for years and has now opted for a new BOA system. This speaks volumes about the trust in the machine, the brand, and the service provided. Bjdpey Tnzcefx Abtoll The press was maintained throughout its entire service life by our own BOA service team in England. This maintenance was always carried out with great care, resulting in a well-documented maintenance history. The press was dismantled in working order and is currently in our storage facility, where it can also be inspected. Before delivery, the machine will undergo a technical check-up. Any parts that need to be replaced will be replaced by us, so that the press can be offered in good condition. Why this BOA D130 B is interesting The BOA Impress D130 B 110 is a heavy-duty industrial baling press with high pressing force, suitable for intensive use and high capacities. Thanks to the side compression and robust design, this is a strong solution for companies that want to efficiently process large volumes of material. Technical specifications Type: BOA Impress D130 B-5V-1.6 Design: D130 B 110 with side compression Hydraulic power: 110 kW Main pumps: 2 × 55 kW Counter-pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 liters Pressing force: 1266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Press stroke: 2900 mm Chamber size: 1100 × 1100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approximately 1400 mm Bale weight: up to approximately 1200 kg, depending on the material Number of binding wires: 5 vertical / 5 horizontal Filling hopper: 1620 × 972 mm Machine weight: approximately 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our storage facility and can be viewed by appointment. Because the press is from our own trade-in stock, was dismantled in working order, and maintained by our own service team, we can provide a good overview of the technical condition and history. A robust, used BOA press with a known history, professional service record, and a check-up before delivery.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 90 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 720 mm, bale height: 1,100 mm, bale weight: 600 kg, overall weight: 32,000 kg, pressure: 300 bar, power: 110 kW (149.56 HP), BOA baler with double pre-press flaps available in fully refurbished condition. The machine is located at our workshop in Almelo and can be inspected by appointment. If required, a matching (new) conveyor belt can be produced. The machine is perfectly suited for baling various materials such as cardboard, paper, plastics, car tires, and RDF. Bledpfexbc U Dsx Abtsl The machine is equipped with a so-called refu-ram. This is ideal for baling materials such as plastic bottles and/or shredded RDF. Technical specifications: Drive: 2x 55 kW Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tying wires: 5 vertical

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg Bledpfx Abezvb I Ejtsl EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: used, Year of construction: 2017, machine/vehicle number: 0-303-21-0734, functionality: fully functional, operating hours: 19,436 h, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, total height: 3,000 mm, total length: 14,000 mm, total width: 3,400 mm, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOMAG VKS 250 cardboard cutting machine For sale is a HOMAG VKS 250 for the automated production of customized corrugated cardboard packaging. The system is designed for both series production and single-item production and enables cutting, creasing, and perforating in both longitudinal and transverse directions. The machine has been further modernized and expanded and is ideal for companies that want to produce packaging flexibly and according to their specific needs. Technical data / Features: 8 real + 8 virtual longitudinal tools 1 transverse tool Bljdpfszv S Snjx Abtol automatically adjustable tools Multi-line processing automatic 5-position endless cardboard changing system, 3 of which are side-by-side intelligent remaining length management Infeed width: 350–2,500 mm Cardboard thickness: 2–7 mm Processing of 1- and 2-ply corrugated cardboard Longitudinal cutting tolerance: max. 0.5 % Transverse cutting tolerance: max. ± 2 mm Working height: 900 mm IntelliCut machine control HOMAG powerTouch multi-touch control panel PLC control and industrial PC automatic production according to production lists Connected load: 4.5 kW Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Space requirement approx. 10,500 × 3,400 × 3,000 mm Weight approx. 2,800 kg Further information on condition, modernization and price available upon request.

Condition: excellent (used), Catalogue number 7709 TECHNICAL DATA - Distance between first and third unit: 7400 mm - Max element width: 250 mm - Max bundle width: 1200 mm - Max bundle height: 1300 mm - Manual adjustment of unit spacing - Programmable number of elements per layer - Element counting - Total length of feed rollers: 10200 mm - Feed roller speed adjustable by geared motor - Automatic interlayer insertion - Interlayer dimensions: 1200 x 18 mm - Interlayer magazine - Overall dimensions (L/W/H): 10200 x 2400 x 2500 mm - Weight approx. 3000 kg ADVANTAGES – German-made – 3 processing units – Robust construction – Untreated/Not repainted – Used machine, in very good condition Net price: 185,900 PLN Blodpfx Aozxhfpobtjl Net price: 44,260 EUR (based on an exchange rate of 4.2 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2018, We offer a used SchurStar 2060-C packaging system—an industrial packaging machine designed for filling and sealing pre-made bags in production and packaging processes. The machine is designed for flexible packaging of food, industrial, pharmaceutical, and chemical products. The SchurStar 2060-C model allows for operation in either manual or automatic filling mode. The system feeds bags continuously or intermittently, depending on the product type, packaging format, and production process organization. As a result, the machine can be used for smaller production batches as well as in medium- or high-throughput lines. The SchurStar 2060-C is designed for short changeover times and to minimize packaging material waste. The machine can handle various types of packaging materials, such as PE, CPP, co-extruded films, and laminates. The system is suitable for packaging products that require aesthetically pleasing, consistent, and leak-proof packaging. The AISI 304 stainless steel construction facilitates hygiene maintenance and allows the machine to be used in food processing facilities. The system can be equipped with additional modules, such as feeders, hoppers, an air extraction system, a compression unit, a bag vibration system, gas flushing, marking, or labeling. Technical Specifications: Manufacturer: Schur Technology a/s Model: SchurStar 2060-C Type (as per nameplate): Y30054 Year of manufacture: 2018 Standard: EN 60204-1 Construction: AISI 304 stainless steel Power supply: 3 × 400 V + N + PE, 50 Hz Rated power (according to catalog data): 3.5 kW Maximum circuit breaker rating: 16 A Load: 10 A Ikmax: 15 kA Grounding: TN-S Blodpfx Abezhwivstsl Air supply pressure: 700 kPa Air consumption: 140 l/min Bag feed speed: 3–30 m/min Continuous-duty output: up to 80 bags/min, depending on the product and bag format Intermittent-duty output: up to 35 bags/min, depending on the product and bag format Format changeover time: 4–5 minutes Maximum bag dimensions: width 450 mm, length 500 mm Minimum bag dimensions: width 100 mm, length 100 mm Packaging material: PE, CPP, coextruded films, laminates Material thickness: 0.040–0.140 mm Weight: approx. 650 kg CE marking: yes Key advantages: packaging in pre-made SchurStar bags capability to operate in manual or automatic mode continuous or intermittent bag feeding throughput of up to 80 bags/min in continuous operation quick format change in 4–5 minutes low packaging material waste AISI 304 stainless steel construction capable of handling various packaging materials suitable for producing small, medium, and large batches can be integrated with additional packaging modules renowned manufacturer Schur Technology Applications: packaging of food products packaging of non-food products packaging of pharmaceutical products packaging of chemical products packaging of bulk, portioned, and

Condition: ready for operation (used), Year of construction: 1995, operating hours: 15,000 h, functionality: fully functional, working width: 1,430 mm, type of input current: three-phase, total width: 5,000 mm, total length: 5,500 mm, total height: 2,100 mm, overall weight: 4,000 kg, input voltage: 380 V, Automatic flatbed die-cutting machine with sheet feeder, suitable for cardboard and corrugated board. The machine is fully operational and ready for production. The machine offers absolute safety for the operator. Maximum sheet size: 1030 × 1440 mm. Bjdpfx Ajzidbnobtoll

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials Bsdpfxszuw R He Abtell - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Bodjzvp Uyepfx Abtell

Condition: used, Year of construction: 2009, machine/vehicle number: 09-0116, Cardboard labeling HERMA DS Blsdezx A Acspfx Abtol

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Bodpox D Rxpofx Abtoll Application Types Cutting

Condition: new, Year of construction: 2023, operating hours: 10 h, !! We would be happy to advise you!! Model name ////: Rotection cartoner Features ////: Double servo feed control, with hot melt station, safety enclosure and safety technology Production orientation ////: Horizontal Bjdpfxor E Dpae Abtjll Conveyor system ////: Fan conveyor belt Carton feed ////: top with active conveyor belt Operator display ////: Touchscreen Drives & control ////: 8 servo motors and PLC control Box length ////: 150-300 mm Box width ////: 120-260 mm Packaging height ////: 50-100 mm Speed ////: 40-60 boxes/min. depending on box size and product weight Recommended cardboard box ////: pre-folded boxes, 250-350g/m³ Consumption ////: approx. 9.5KW Power supply ////: 380 V / 50 Hz/ 3-phase System weight ////: approx. 1000 kg System dimensions ////: approx. 4257 x 1605 x 1823 mm System material ////: "304 stainless steel with surface treatment" Hot melt station ////: Required, optional Nordson or Robatech

Year of construction: 2019, condition: used, total length: 2,600 mm, total width: 2,800 mm, total height: 1,600 mm, cutting width (max.): 1,800 mm, The FQJ-1800 honeycomb panel cutting machine (year of manufacture 2019) is an efficient, used machine, ideal for precise cutting of panels with widths ranging from 125 mm to 1800 mm and thicknesses of 10–80 mm. Equipped with three blades, it allows for adjustable cutting speeds in the range of 0–50 m/min, enabling the machine to be adapted to individual production needs. The motor has a power of 4 kW (380V, 50Hz), ensuring reliable and high performance even under intensive use. The machine comes from the renowned manufacturer San(qingdao) Machinery Co., which guarantees a robust construction and durability. This is an excellent option for companies looking for professional solutions in the field of honeycomb panel cutting. Bjdpszuxmisfx Abtell

Year of construction: 2020, condition: used, New: Yes Colour: Orange Field of application: Mining Volume of the tank: 150 m^3 Productivity: 250 tph Rated sizes : 2000 x 6000 mm Motor power : 22 kw 1500 d/dk Drive system : with conventional drive, with 2 weights Bedpfx Abjx D A Upjtell Amount of Ball Bearing : 2 ea Number of Ball Bearing :2*22318 (FAG T41 Ball Bearing with Vibration Amplitude) Screening area : Single stage Number of Vibration amplitude : 6-8 amplitude, Linear Free Eliptic Number of Springs : 12 ea Front chute : with 6 mm rotary chute Bottom chute : flat discharge chute Type of power transmission : belt pulley couples Body Construction : Heavy duty type (12mm ST37 Ereğli Iron Steel Sheet Metal)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Bodpfx Aoxqf U Sobtsll Flexibility: Can also be configured for food and chemical products in other versions of the machine.

Condition: used, Roller conveyor Length: 14m Width: 1.1m Roller width: 0.85m with spiral roller conveyor Length: approx. 7m Width: 1.1m Roller width: 0.85m Blsdozx Ehujpfx Abtsl Location: Germany, near Lake Chiemsee

Condition: excellent (used), LINE of packaging with cardboard. Capacity: 6–8 boxes per minute. Packaging line for furniture components, featuring manual, continuous filling of the boxes with furniture parts, automatic hot-melt adhesive sealing, and automatic unloading by KUKA robot. The line consists of: a) Infeed roller conveyor b) Stretch wrapping machine (plastic film), ROBOPAC, Model Orbit 12 c) Carton box forming machine, AUTOMATECH ROBOTIK d) Hot-melt adhesive gluing machine, DYNATEC, Model DynaMelt e) Printer, LIMITRONIC, Model V L 780 SE R 1 R3 1 ES Bedezxn U Depfx Abtsll f) Vacuum handling system, PROTUBE HANDLING SOLUTIONS g) Robot, KUKA, Model KR C4 NA UL

Condition: used, Year of construction: 1993, Overview  This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Blsdpoy Etqmsfx Abtjl Technical data  - Capacity: approx. 20 ppm - Formats: - 1.5 L – 3×2 - 2.0 L – 3×2 - Application: Shrink packaging of PET bottles - Configuration: Shrink packer with sealing bar (film only)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, operating hours: 1,00,000 h, input voltage: 4,000 V, type of input current: three-phase, total length: 65,000 mm, overall weight: 40,000 kg, controller model: partially manual, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Blodpewycrcsfx Abtol

Condition: used, Year of construction: 2013, total length: 3,050 mm, total width: 1,650 mm, total height: 2,350 mm, Colour: Grey Weight: 5.690 kg - Year: 2013 - Documentation available: No Bljdpfxszbhy To Abtsl - CE marking present: Yes - CE certificate present: No - Serial number: 7304138524 - Drive system: CNC - Control system brand: Durma - Power [kW]: 7.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 60 - Max. working width [mm]: 2050 - Column gap [mm]: 1720 - Backgauge depth [mm]: 800 - Crowning system: Mechanical - Tools included: Yes - Options: Digital readout - Transport dimensions: 3050mm x 1650mm x 2350mm (l x w x h) - Transport weight [kg]: 5690kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum