Used Hakomatic B 655 S for sale (14,913)

Condition: used, machine/vehicle number: 948587884, Working width of the brush head: 65 cm Number of disc brushes: 2 Suction width of the squeegee: 95 cm Driving speed forward/backward up to max.: 5,5/2,5 km/h Turning circle-Ø outside: 1,9 m Unladen weight: 254 kg Total weight incl. 74 l cleaning solution: 378 kg Space requirement: Length with brush head and suction: 146 cm Width without/with suction: 68/95 cm Gedpsc Uvfvefx Aabouh Height: 103 cm Tank capacity for fresh water approx.: 72 l Tank capacity for waste water approx.: 78 l

Condition: good (used), pressing force: 150 t, Hammer weight: 150 kg Stroke: 480 mm Strokes: 168 p/min. Throat: 375 mm Ram diameter: 180 mm Country of origin: UK Motor power: 11 kW Gusdjubb Stjpfx Aabeh Machine LxWxH: 200 x 180 x 240 cm Machine weight: 6000 kg

Year of construction: 2012, condition: ready for operation (used), A Climaveneta chiller is available. Cooling capacity: 73.8kW, power consumption: 27.6kW, compressors: 2, refrigeration circuits: 1, refrigerant: R410A, refrigerant charge: 10.2kg, heat recovery: cooling capacity 76.6kW/heating capacity 23.3kW. Machine dimensions X/Y/Z: approx. 2200mm/1150mm/1450mm, weight: approx. 680kg. Documentation available. An on-site inspection is possible. Gedpfxoxc Nh Ts Aabeuh

Condition: new, The B 200 S is a robust Horizontal Mitre Cutting Bandsaw designed for efficient and precise cutting in industrial workshops and one-off production settings. As an entry-level model in the Semi-Auto Bandsaw category, this KNUTH machine features a swiveling saw frame that allows for miter cuts of up to 45 degrees, enhancing versatility for various tasks. The infinitely variable saw frame feed is controlled by a hydraulic valve, providing precise adjustments even during operation. Built for durability, the one-piece cast-iron saw frame and low-maintenance V-belt drive ensure consistent performance while minimizing vibration and noise. Equipped with a coolant system, quick-release device, and mobile base, the B 200 S is engineered for ease of use. With a cutting capacity of 205 mm for round materials and 205 x 215 mm for flat materials, this Horizontal Mitre Cutting Bandsaw is a smart addition to any workshop. You can order online to take advantage of this reliable solution from KNUTH. Gusdpfsuyh I Uex Aabeh

Year of construction: 2000, condition: ready for operation (used), This SCHÜCO B 50 S was manufactured in 2000. It features saw blades of 500 mm and a maximum distance between saw heads of 6000 mm. The saw units can swivel both left and right, enhancing flexibility and precision in metal cutting. Contact us for more information. Application Types Sawing Guodjxmbwzjpfx Aabsh

Condition: new, Year of construction: 2025, Five-axis CNC milling machining center - 3D CNC machining center > The CNC milling system Basis is the optimal entry-level model for milling plastics, composite materials such as CFRP, model-making materials, or aluminum. > High feed rate, compact 5-axis milling head for spatial machining, first-class milling results: The machine is individually adjusted to the material requirements before delivery. This ensures first-class surface quality and excellent milling results for all materials. > With a fixture from HG GRIMME SysTech, the milling quality can additionally be increased considerably. Existing fixtures or tables can be reused at any time. > Modular expansion stages: The CNC machine can be upgraded at any time, even individual requirements can be implemented quickly. With an optional partition wall, for example, unloading and loading can take place on one half of the table while the workpiece is being machined on the second half. The production cycle is accelerated with this technology. > Safety The safety booth already has a generous access area in the basic version and can be optionally upgraded with a soundproofing package. All drives and guides are protected and above the milling area. We have about 365 possibilities to adapt your CNC machining center exactly to your workpiece and material. The basic machine can be extended at any time. Gujdsxdwn Rjpfx Aabjh > Basic version of the CNC machining center - Cabin with sliding doors, automatic opening, pneumatic - High-performance CNC control NUM Flexium+ with hand terminal (nPad) and 19`` graphic screen - Tool changing system with 13 places, can be loaded from the outside - bellows for dust protection on the Z-axis - cooling unit Cube dimensions component X/Y and Z - 2.500 x 1.000 x 600 mm (plus 162 mm base) Travels X/Y and Z - 3,100 x 1,600 x 910 mm Travels of rotary axes A and C - Rotary axis C 540° - Swivel axis A ± 110 Speeds - Rapid traverse linear axes X/Y 80 m/min - Rapid traverse linear axis Z 30 m/min - Rapid traverse of rotary axes A/C 10,800°/min / 18,000°/min Accuracies - Positioning accuracy ± 0.045 mm - Repeat accuracy ± 0.040 mm Milling spindle - High-frequency milling spindle 9 kW continuous operation (S6) - High-frequency milling spindle 8 kW continuous operation (S1) - Max. speed 36,000 rpm - Tool holder HSK E 40 Machine weight: - approx. 8,000 kg Already included optional equipment - Vacuum pump and vacuum system 1x 6-unit - knee switch 1x - Ethernet and remote maintenance - 3D spline - 3D head data - T-Box connection

Year of construction: 1992, condition: used, Raimann B110S band saw Roller diameter 1100mm Roll width 100mm Cutting width right and left of saw blade 200mm Guedsb R Ty Aopfx Aabsh Cutting height max. 400mm

Condition: used, functionality: fully functional, overall weight: 35,000 kg, empty load weight: 8,330 kg, maximum load weight: 26,670 kg, axle configuration: 3 axles, loading space length: 13,540 mm, loading space width: 2,470 mm, loading space height: 2,900 mm, loading space volume: 97 m³, first registration: 06/2023, next inspection (TÜV): 09/2026, suspension: air, color: black, tire size: 445/45 R 19,5, Year of construction: 2023, Equipment: ABS, tail-lift, Object number #30469 BPW axles Disc brakes Tyres 445/45 R 19.5 BPW Air Save (tire pressure monitoring) Body interior dimensions: 13,540 x 2,470 x 2,900 mm MBB Palfinger tail lift, 2,500 kg Portal doors Double internal locking bars Cargo securing certificate EN 12642 XL 5 rows securing rails Wabco Smart Board (98,101 km) ABS/EBS Lifting/Lowering function 4 pairs of ferry lashings BPW landing legs Axle load indicator Side underrun protection Translucent roof LED interior lighting 2x toolboxes 2x fire extinguisher boxes Work lights rear & side Godpfoxazd Ijx Aabeuh Leasing or financing available on request!

Condition: used, Year of construction: 1995, BIGLIA B 500 S LATHE CNC FANUC: O-T SPINDLE + SUBSPINDLE Gusdpfexk Tz Tjx Aabeh MAIN CHUCK DIAMETER: 210 mm SUBSPINDLE CHUCK DIAMETER: 165 mm TURNING LENGTH: 500 mm TURNING DIAMETER: 270 mm BAR CAPACITY: 67 mm DUPLOMATIC TURRET TOOL MAGAZINE: 12 POSITIONS SPINDLE: ASA 6 SPINDLE SPEED: 4000 RPM (MAIN & SUBSPINDLE) PART CATCHER ARM CHIP CONVEYOR MACHINE FULLY CONNECTED AND IN PERFECT WORKING ORDER YEAR: 1995 REFURBISHED

Condition: good (used), Year of construction: 2012, functionality: fully functional, cooling capacity: 127 kW (172.67 HP), type of cooling: air, overall weight: 1,030 kg, total width: 1,120 mm, total length: 3,250 mm, total height: 1,620 mm, warranty duration: 6 months, heating capacity: 144 kW (195.79 HP), Aircooled chiller/Heat pump CLIMAVENETA NECS N B S 0512 127 kW / 144 kW Cooling capacity: 127 kW / 36.11 tons (12/7 — 35°C) Heating capacity: 144 kW / 40.95 tons (40/45 —7°C) Year of manufacture: 2012 Gujdpfoxcucijx Aabeh Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410a Number of fans: 10 pcs. ( 5 pcs. frequency inverter driven) Dimensions: 3.25x1.12x1.62 m. Weight: 1030 kg Working hours: 1985/1985 h. Condition: Good

Condition: used, Year of construction: 2023, Spraying machine KaMa, KR BM 1000 B, The spraying machine is a demonstration model from a trade fair. It was only used for test and demonstration purposes. With 1 piece HD pump Bings Marple 8/25 up to 175bar and 4 pieces airless spray guns Krautzberger KAA1300. Machine equipped with change-over valve for quick color change, lever switchable to max. 3 color circles and 1 rinsing agent pump (options). In Ex-version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system Gujdoumvnhopfx Aaboh - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bis max. 175bar - Supply air box - Suitably for water based lacquer - Length 3243 mm - Width 3482 mm - Height 2450 mm - Voltage / HZ 400 / 50 - Colour 7035, lichtgrau - Weight 3.100 kg _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Gsdpfxoxdl U Ej Aabeuh

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ribes, conveyor belt type 2 E/U/BS 1.5 -Width: 1300 mm Gedpfx Asw Slxnsabjuh -Length: 3420 mm -Thickness: 1.5 mm -Quantity: 1 piece available -Transport dimensions: Ø 175 x 1300 mm -Weight: 7.4 kg

Condition: ready for operation (used), Spindle diameter: 90mm, boring spindle longitudinal adjustment: 700mm, spindle head vertical adjustment: 1250mm, speed: 1000rpm, rapid traverse: 2600mm/min. Table swivel range: 360°, table clamping surface X/Y: 1100mm/1400mm, table cross travel: 1800mm, table longitudinal travel: 1250mm, max. table load: 4000kg, bed dimensions X/Y: 3380mm/1800mm. Machine dimensions X/Y/Z: approx. 4650mm/3900mm/3000mm. Documentation available. An on-site inspection is possible. Gusdpfx Aasw N Shqebsh

Year of construction: 1995, condition: used, Max. sawing length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning via diamond control of length and angles Angles can be swiveled inwards and outwards (20-135°) Moving roller conveyor Soundproof cabin Minimum quantity spray device chip conveyor belt Gedpfjv Ip T Dex Aabouh Weight: approx. 2,800 kg

Condition: good (used), functionality: fully functional, Hako B43 S combination floor cleaning machine with accessories: Manufacturer : HAKO Werke GmbH Germany S/N 740671353081 Functional Suction pump, washing brush or squeegee Battery charger 24 V Charging voltage 800 W Guodpfx Asty Su Esaboh 90 kg CE marked

Condition: ready for operation (used), H & B / S & F AVL 220 Electrical transmitter, measuring range 0-250 mbar, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Guodpoi Eac Njfx Aabeh

Year of construction: 1999, condition: used, Machining center for muntins KOCH Type B-510-S workpiece length 120-3000 mm workpiece width 20-290 mm workpiece thickness 30-100 mm drill- chipboard HM drill, solid wood HSS drill cutter speed up to 18000 rpm dowel dimensions diameter 8 x 60 mm dowel projection variable working height 900 mm Gsdpfeilurvox Aabsuh connected load 16 kW dimensions LxWxH 5400 x 3500 x 2900 mm Weight approx. 4000 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier -Manufacturer: Bachmann, electronic module valve amplifier from Battenfeld injection molding machine -Type: CPPV 200 SB 7621/00 -Quantity: 1x module available -Price per piece Gedpfjg Tizxsx Aabouh -Dimensions: 125/85/H30 mm -Weight: 0.2 kg/pc.

Condition: used, Year of construction: 2006, operating hours: 704 h, Hako Hakomatic B1100 scrubber-dryer, built in 2006, operating hours: only 704 hours, previous owner: German Armed Forces, includes charger, battery built in 2006, in good condition, ready for immediate use. We can provide you with a leasing or financing offer upon request. Mr. Mihm (Tel. +49 1 800 800) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! Gjdpewapd Esfx Aabouh

Condition: used, The Samputensili S 500 B bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used by gear and transmission technology manufacturers for the bevel gear milling process. Technical specifications: Gear diameter: 500 mm Gujdpfx Ajv N H N Ejabeh Max. module: 5 Tooth width: 200 mm Space requirement approx.: 4.5 x 3.2 x 2.4 mm Machine weight approx.: 13,000 kg *Image shows the machine in its current, actual condition as a used machine

Condition: used, operating hours: 172 h, overall weight: 1,500 kg, fuel type: electric, HAKO Automatic Cleaner and Scrubber-Dryer Name: HAKOMATIC B 1050 Drive: ELECTRIC Condition: see photos / TOP condition Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see photos - visually TOP Operating hour meter reads "172" 4 brushes Electric-operated Battery, full power 36 V DC / 5.5 KW Weight: 1500 kg New price: approx. €39,900 Price quoted for pickup from the warehouse in 47441 Moers Various cleaners and scrubber-dryers in stock We offer them as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings by telephone on Tuesdays and Thursdays between 9 a.m. and 4 p.m. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. Guodpfxjwfflvo Aabeh All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €350 net, depending on distance.) All dimensions are approximate.

Condition: ready for operation (used), MAC115D-1-DS-S-F/180-B-0 Permanent magnet motor, hole spacing of the mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm, used, normal signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Gusdpji D Ngksfx Aabsh

Condition: new, "R1 ZACMI 40 POCKETS" Rotary volumetric telescopic filler. Product: filled with solid particles such as various vegetables, peas, beans, etc. Format: Tetra Recart containers. Indicative particle size: up to 15 x 15 x 15 mm Filling temperature range: from 7 ºC to 95 ºC. Machine configuration: * Central mobile deflector with pneumatic motorized format height adjustment * Equipped with transducers (Balluff) to check position * Accumulation and feeding hopper (Mod. 0171-R-005): Total dimensions: Hopper length: 1.27m Hopper width: 1.22 m Long hopper + vibrator: 3.70 m Working dimensions: Hopper length: 1.07 m Hopper width: 1.10 m High hopper: 0.90 m Gedpfxjwngh Do Aabouh Long hopper + vibrator: 3.10 m * Motorized volume adjustment * Adaptation of the electrical panel to UL- and NFPA- standards. * Production: 20,000 units per hour Expected fill volume variation: * From 1.5 to 10 g for peas, corn, cannellini beans etc. This variation depends on the properties of the product (such as the size of the particles, surface properties, density, temperature, percentage of humidity, etc.) as well as on the suitability of the product to be kept at a constant level in the feed tank. Features: * Regulation for variable capacity. * Variable speed drive * Spindle input. * Level detector. * The filler has the "NO CAN - NO FILL" device, which allows filling only in the presence of a container. * Fully automatic CIP, no manual intervention * Quick format change. * Allen-Bradley touch screen * Protection cabin * Equipped with vibrating cones that are especially suitable for products that are difficult to fill and cannot be transferred directly from the telescopic bag to the container. Here the product is dosed into adjustable telescopic pockets and transferred to the container with the use of vibrating cones. * The production may vary depending on the format and product to be filled.

Condition: used, Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection molding machine -Type: PVV100/SB 7827/00 Guedpfx Ajqku Iwjabsh -Quantity: 3x Modul card available -Price per piece -Dimensions: 130/50/H30 mm -Weight: 0.1 kg/pc.