Used Bobst Flatbed Die Cutter for sale (9,468)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations Nodpjww E Nrofx Akfjwf

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Nsdpfx Akedzqmzjfewf Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Year of construction: 1995, condition: like new (used), * Automatic flatbed die cutter * Very good condition. Nwodpfx Ajkyt U Tjkfjf Cldsvexqcy * Possible to see in production. * Max size 1100x1600

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Nsdpfx Aev T T N Hekfewf Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or maintenance backlog. Nedpfxewk I Iqs Akfowf The electronics have not been modified or altered. Everything is still original. Documentation is complete. We have circuit diagrams and exploded views for both digital and analogue systems. All frames and pins are present to utilize the machine's functions, especially for the stripper, blank separator, and lower stripping station with pins. There is a quick-clamping system so that the stripper, for example, does not need to be secured separately. If interested, additional pictures or videos can be sent. Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Max. speed: 8000 sheets/h Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop stacker Side guide Quick-release lock We can assist with disassembly, assembly, and transport. Special feature: The machine is raised by approximately 100 mm, eliminating the need for a pit in production! The raised frame can be removed without tools and is not permanently attached to the machine. Please feel free to contact us with any further questions. Best regards

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Nwjdpfx Aey E Ex Ajkfef Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Nedpfx Asy Ah Injkfowf Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Nwsdpsyxry Hofx Akfef Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Nodpsywdt Aofx Akfowf Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: good (used), Original Heidelberg GT 34×46 Automatic Die Cutter This machine can cut, creas, perforate, and even print (optional). Excellent condition, recently serviced. 100% original, no modifications. Machine format: 34x46cm Pressure: 60t Weight: 600gsm Working speed: 4000 sheets/h Weight: 2300kg Fully complete, includes frame and spare parts, but no print rollers. A very rare machine on the market. Nwsdpfx Asywdr Sskfef

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. Nedpfxjyur Dij Akfswf 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Nwjdpfxjyuw S Eo Akfof Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide Nodpfx Ajyz Adnekfjwf 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: used, Year of construction: 2023, functionality: fully functional, cutting width (max.): 780 mm, cutting length (max.): 1,080 mm, Equipment: documentation/manual, Description For sale: Secabo FC100 professional flatbed cutting plotter, purchased in 2024 and barely used. Nwjdoytbubepfx Akfef The machine is in perfect working order and available for inspection and testing. It features a vacuum table with a vacuum pump, ensuring excellent material fixation and precise cutting quality. This cutting plotter is ideal for: - Packaging prototypes - Labels and stickers - Cardboard packaging - POS materials - Short production runs The machine is supplied with licensed DrawCut PRO software. Technical Specifications - Working area: 780 × 1080 mm - Maximum cutting thickness: 1.5 mm - Maximum material weight: up to 400 g/m² - Cutting force: 50 – 500 g - Maximum cutting speed: 600 mm/s - Drive system: Servo motor - Automatic contour cutting with LAPOS Q mark recognition - Interface: USB - Control panel with LCD display Included in the scope of delivery: - Secabo FC100 flatbed cutting plotter - Vacuum table + vacuum pump - DrawCut PRO license - Knife holder + blades - Creasing tools - Cutting mat - Accessories and cables Condition - Age: Approximately 1 year - Very low usage - Excellent condition

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Nwjdpfx Asyxq Ucjkfjf

Condition: used, Automatic Platen Die Cutter Joh. Cietz PRESTO Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Nwodpfx Aksylqd Ajfsf Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 0901 0009, cutting height (max.): 10 mm, nominal flow rate: 3,000 m³/h, table length: 1,900 mm, table width: 1,450 mm, TECHNICAL DETAILS Working area: 1,900 x 1,450 mm Cutting thickness: 10 mm MACHINE DETAILS Knife system: Oscillating drag knife and ultrasonic knife Nwedpjyu Ry Njfx Akfef Airflow rate: 50 m³/min Electrical data Voltage: 400 V, 50/60 Hz Number of phases: 3 Ph / N / PE Connected load: 3.5 kVA Main fuse: 16 A Control voltage: 24 V DC EQUIPMENT Vacuum unit conversion to Rovicore RTM vacuum table with distribution channel

Condition: new, Year of construction: 2025, We are a Polish manufacturer of recycling machines. We offer personalized solutions compatible with die-cutters and die-cutting machines from various brands. All parameters are customized to meet individual customer needs. The RS-601 shredder collects waste directly from the die-cutter, ensuring efficient and smooth operation. It is equipped with a conveyor belt and a feed hopper with an openable bottom, making handling easier and optimizing production. We invite you to cooperate with us. RS TeamTech Team Njdpfsv Eqf Aex Akfewf

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. Nwsdpfjiklxbex Akfof We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Nsdpfxeymmqzj Akfowf Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console – Heated plate Nwedjyl Unxjpfx Akfof – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication – Additional safety guards – Working tools – Hard pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Nwsdpfxoyl Um Uo Akfef Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: Nwodeyl Umnspfx Akfef – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication Nwedoyl Ulwspfx Akfof – Additional safety guards – Working tools – Hardened pressure plate

Condition: used, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1983 - Serial-No. 194543 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Nwjdsv Hw Hijpfx Akfef Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test