Used Bobst Sp 142-Er for sale (37,481)

Condition: used, Year of construction: 1984, Die-cutter Cgodpfx Aaer I Ipvo Njt Bobst SP 142-ER Year: 1984 Hours: 29.924 (on counter; real expected production hours around 60.000/70.000) Equipped with: - Stripping and Blanking Stations - Push Lay system - Non-Stop Feeder with manual change over bars - Non-Stop Delivery - Corrugated board feeder - Quick locking Tooling in Stripper - Micrometric system Technical specifications: - Max cutting speed : 6.000 s/h - Max sheet size : 1420 x 1020 mm - Min sheet size : 700 x 500 mm - Cutting force : max. 600 T - Solid board up to 2.000 g/m2 - Corrugated board up to 4mm thick

Condition: good (used), Year of construction: 2000, operating hours: 23,000 h, Bobst SP 142 CER II Csdsxxypyspfx Aa Negt

Year of construction: 1990, operating hours: 21,834 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 059700605, Bobst SP 142-CER from 1990 for sale – Reason for sale: replacement investment made. The machine can be inspected in production. Dismantling and transport at buyer's expense. Cgedpfx Aey Htxgea Not

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, FEEDER PLUS System Adjustable operator-side clamping team with Centerline references, with control Codpfx Ajy D Ht Sja Nsgt of the presence of sheets Operator-side pushing team opposite Double sheets detector Centering and closing of the die-cutting equipment Waste trimming extraction station with quick tool clamping High stack exit Bobst CUBE II Above elevated by 35 cm. Blank preparation frame outside the machine Max format: 102x142 cm Min format: 50x70 cm Min paper weight: 80 g/m² Max cardboard weight: 2,000 g Max corrugated thickness: 4 mm. Max speed: 7,000 sheets/hour Max pressure 600 Tons Available September/October 2026

Condition: ready for operation (used), Year of construction: 2005, Bobst SP 104 ER Die-cutter Cedpfx Aaswgz H Ej Njgt Diecutter with stripping and blanking station Technical specifications: Paper min. 90 g/m2 Cardboard max. 2000 g/m2 Corrugated board max. 4 mm Min. sheet size: lxw 350 x 400 mm Max. sheet size: lxw 740 x 1040 mm Max. dimensions of cutting die: Max. lxw 725 x 1040 mm Cutting force: 250 tons Running speed: max. 8.000 s/h. Centerline for job quick-change Adjustable centering at the stripping and at the delivery, Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic) Non Stop Feeder, Steel plate, Double Sheet Sensor, Left hand pull lay, Right hand pull lay, Micrometic adjustment, Centerline, Double Action Stripper, Blanking Station, Quick lock stripping frame,

Condition: good (used), functionality: fully functional, machine/vehicle number: 057400108, Manufacturer: Bobst, Switzerland Model: SP 142 Machine Category: Die Cutting Machine Codpfx Aajw Rb Ebo Negt Machine Type: Autoplaten Year of Manufacture: --- (not specified) Machine Number: 057400108 Technical Specifications: - Max. Sheet Size: 1420 x 1020 mm - Min. Sheet Size: 700 x 500 mm - Speed: up to 4,500 sheets/hour (depending on job) - Power Supply: 380 V, 50 Hz Features: - Robust Swiss design - Mechanical control with side operator console - Pile feeder and delivery for continuous operation - Suitable for cartonboard and corrugated board - Proven model for packaging production

Condition: ready for operation (used), Year of construction: 1985, Bobst SP 102 CER - Perfect condition available immediately Year 1985 Max.Size: 1020x720 mm Min.Size: 400x350 mm Max.Speed: 8000 Sh/h Max. Cutting force: 250T Paper: min. 80 gr/qm Cardboard: max. 2000 gr/qm Centerline Feeder Non-Stop Cgodpfx Aaewathho Not Autom. Non-Stop with Sheet inserter Side guide Quick Lock system

Year of construction: 1988, condition: excellent (used), Ref: 11099 . 1990 Bobst SP 102 - CER Automatic die cutter with stripping and blanking. Non Stop Feeder Steel Plate Feeder Digital Speed clock Left Hand Pull Lay Active Front Lays Die Cut Station Cedpfxsy Ipt Nj Aa Nsgt Centerline 1mm Cutting Plate Micrometric Adjustment Quick Lock Chase Stripping Station with Quick Lock Stripping Frame 6 Standard Stripping Frames Blanking Station with Quick Lock Blanking Frame 1 x Universal Quick Lock Blanking Frame 6 Standard Blanking Frames Sheet Inserter in Blanker for Pile Stabilisation Can be run just as a Stripper and Sheets delivered into the Blanker Station Waste conveyor on Delivery Specification: Maximum Sheet Size 720 x 1020mm Minimum Sheet Size: 350 x 400mm Maximum Speed 8,000 SPH Maximum Cutting Pressure 250 Tons

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or maintenance backlog. The electronics have not been modified or altered. Everything is still original. Documentation is complete. We have circuit diagrams and exploded views for both digital and analogue systems. All frames and pins are present to utilize the machine's functions, especially for the stripper, blank separator, and lower stripping station with pins. There is a quick-clamping system so that the stripper, for example, does not need to be secured separately. If interested, additional pictures or videos can be sent. Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Max. speed: 8000 sheets/h Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Csdpfewk I Iqjx Aa Negt Non-stop stacker Side guide Quick-release lock We can assist with disassembly, assembly, and transport. Special feature: The machine is raised by approximately 100 mm, eliminating the need for a pit in production! The raised frame can be removed without tools and is not permanently attached to the machine. Please feel free to contact us with any further questions. Best regards

Condition: good (used), functionality: fully functional, machine/vehicle number: 552410, Year of construction: 1974, Manufacturer: Bobst, Switzerland Model: Autoplatine SP 1420 E – 600 T Type: Die Cutting Machine / Autoplatine Year of manufacture: 1974 Cedjw Rb Ezopfx Aa Negt Machine No.: 552410 Technical specifications: - Max. sheet size: 1420 x 1020 mm - Min. sheet size: 700 x 500 mm - Speed: up to 4,500 sheets/hour - Power supply: 380 V, 50 Hz Features: - Robust construction for carton and corrugated board - Automatic platen die cutting - Pile feeder and delivery - Mechanical control with operator panel - Proven Swiss quality

Condition: ready for operation (used), Year of construction: 2006, Bobst SP102-BMA Foilmaster Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Cgjdjwgz Rkepfx Aa Net Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Has been operating in a greeting cards factory Comes with centre line system 2 x die cut chases Codpfjyrnhxex Aa Nogt 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately

Condition: new, Bobst chains gripper bar 142 CER new Available: 2 sets Cedpfofl Sfyex Aa Nogt

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. Csdpfsxl Talsx Aa Nogt - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging Csdpfx Asxzr Hpja Nsgt • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Codpfju Snwmex Aa Nogt Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Cgedpfx Aajyaq S Aj Njt Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Condition: excellent (used), Year of construction: 1987, Universal non stop Feeder In line pile preparation Cedpfsvyn Ttox Aa Nogt 4 fron lays Pull guide OS 16 INDEPENDENT HEATING ZONES Honeycomb Leteral guiding device for foil Motorized foil tension, air cooling Size 102x72 cm Min size 40x35 cm Speed with hot stamping 5000 per hour max Speed for die cutting 7500 per hour max

Year of construction: 1981, condition: excellent (used), We offer this machine in very good condition: Bobst SP 102E Autoplaten, manufactured in 1981. Manufacturer: Bobst/Switzerland Model: SP 102E Autoplaten Year of manufacture: 1981 Condition: Very good The machine is still in production. Test runs are available. This is the main die-cutting machine in our print shop with stripping section. Available from August 2026. No intermediaries – direct from a Polish printing house!!! Cgsdpjy H Dl Defx Aa Nst Price: 70,000 EUR EXW Negotiable price.

Year of construction: 1994, condition: ready for operation (used), Bobst SP 103 E Stripping Top Price (1994) Año: 1994 Formato Máx.: 103 x 72 cm (40 x 28 inch) Max format 103x72 cm min format 40x35 cm max speed 8000 per hour cutting force 250 t Quick lock frame Micrometric Stripping Unit with Quick lock upper chase and lower chase Cgsdpfsy Awinox Aa Net Tools, Manuals and Accessories Non-stop in feeder delivery Stream feeder

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Cgjdpoyz Adnsfx Aa Nst Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Year of construction: 1979, condition: ready for operation (used), functionality: fully functional, Non-binding offer Automatic Die Cutting Machine Manufacturer: BOBST Autoplatine Model: SP-102 E Sheet Size: 1020 x 720 mm Year of Manufacture: 1979 Cgsdpfxoyrxyrs Aa Not Technical Data: - Max. Sheet Size: 1020 x 720 mm - Min. Sheet Size: 40 x 35 mm - Material Range: Paper/Cardboard: 80 – 1,000 g/m² Cardboard: 250 – 2,000 g/m² E+B flute: max. 4 mm - Max. Cutting Pressure: 250 t - Max. Production Speed: 7,500 sheets/h - Fully automatic die cutting machine with stripping station - Automatic high-pile feeder - High-pile delivery - Die cutting plates - Chase frames - Quick-action chase changing system - Complete with accessories - Machine in operating condition and well maintained - Video presentation available upon request! Price: on request Delivery: FCA Availability: immediately

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Cgjdjuk I Nxspfx Aa Not

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Cgodpfx Aaoycv Dvj Nst Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Max Speed 5000 per hour Year 1983 Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Central line Cgsdpfjxcayyox Aa Njt