Punching machine

Bobst Autoplatine Speria 106 E

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand NF42 in 4/42mm from 1988-1990 Lhsdper I Am Hsfx Akfsf AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Max Speed 5000 per hour Lhedpfx Akexcayyefjf Year 1983 Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Central line

Year of construction: 2021, condition: ready for operation (used), Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible. Lsdpfxow Tc R Rs Akfohf

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting Lhodpswgittjfx Akfof rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. Ljdeuf Sy Ajpfx Akfohf The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Lsdpfx Asxdmxlekfshf

Condition: good (used), Year of construction: 2007, functionality: fully functional, Pellet production line based on Italian producer Zepi pellet press, hammer mill, pellet cooler and sifter. Machines are really powerful and reliable. Some parts like hammer mill are completely refurbished. Lsdpfx Asvx S Ryskfohf Year of production 2007.

Year of construction: 1998, condition: like new (used), Round pile feeder, first folding unit TD78/4-1 4 pockets, second unit TD66/4-2,4 pockets, 3 unit knife Stahl EF63 (1984), SBP 80 press delivery, no pump machine was on in house air supply Lhjdod Tnxlopfx Akfsf

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 30996 B, MAN ROLAND R906-6 LTTL Year 2004 Machine no. 30996 B Total impressions: approx. 405 million Sheet-fed offset press – 6 printing units + 2 varnish coating units + 2 tower dryer units 5 units with conventional inking rollers + 1 unit with hybrid rollers High-pile feeder and extended delivery Technical specifications: - Printing speed: 13,000 sheets/h - Max. sheet size: 1020 x 1420 mm - Min. sheet size: 600 x 850 mm - Stock thickness: 0.2–1 mm Ledpfx Akoygdl Nefehf - Max. print area: 990 x 1400 mm - Plate size: 1165 x 1430 mm; plate thickness: 0.30 mm - Blanket size: 0000 x 0000 mm; blanket thickness: 1.90 mm - Dimensions (L x W x H): approx. 25.00 x 4.70 x 2.70 m - Power requirement: approx. 00 kW - Weight: approx. 140,000 kg Accessories and features included: - Non-stop feeder - Steel feed table - Stream feeder with vacuum belt - Preset system (automatic paper size and thickness adjustment) - Electronic double sheet detection - Electromechanical double sheet detection - Electronic side lay control (photoelectric and acoustic) - Antistatic devices at feeder and delivery - RCI machine control and diagnostics via monitor console: self-diagnosis, control and monitor console; remote ink and dampening control; axial, circumferential and diagonal register control with light pen; daylight lamp and memory card for job storage - Multi CCI 2D quality control - APL™ fully automatic plate changer - Remote-controlled circumferential, lateral and diagonal register - Rolandmatic continuous dampening system with alcohol dosing, cooling and Technotrans Beta D recirculation unit - Ink temperature control - Programmable automatic blanket wash - Programmable automatic roller wash - 570 mm raised height - Chromed cylinders - AIRGLIDE sheet transport - Anilox UV coating unit with varnish pump - 2 hot air drying towers between coating units - Anilox conventional coating unit with varnish pump - Automatic sheet de-curler - Grafix Cantronic 3000 powder spray - IR ELTOSCH dryer - UV ELTOSCH dryer with 3 lamps - Extended delivery - Steel delivery table - Non-stop feeder - Tools, documentation - Supplied with all standard parts and accessories Availability: Immediate Condition: Good working order, no damage to cylinders or gears Inspection: Machine is in production, test runs possible Video available

Condition: used, Year of construction: 1982, Kolbus DA 780 Automatic case maker with hard cover Production speed: ~25–35 cycles per minute Case size range: Approx. 140 × 200 mm – 670 × 390 mm Board thickness: 1–4 mm Spine width: 6–80 mm (adjustable) Cover material: Paper, cloth, or coated materials suitable for cold glue Lhjdpfx Aksxz D Ncjfsf Glue type: Cold (dispersion) glue; hot-melt optional retrofit Drive power: ~3–5 kW Machine weight: ~2.5 – 3 tons