Used Boldrini Ribo 20Hy/4000 for sale (2,459)

Condition: good (used), overall weight: 13,000 kg, total width: 2,200 mm, total length: 8,000 mm, total height: 3,300 mm, Flanging and dishing machine BOLDRINI - RIBO 20HY/4000 Pedpfx Aozil H Eef Rogp BOLDRINI RIBO 20HY/4000 Hydraulic Flanging & Dishing Machine. Capacity up to Ø 4,000 mm. Suitable for manufacturing dished ends, pressure vessel heads and tank bottoms. Length:8000mm Width:2200mm Height:3300mm Weight:13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), overall weight: 42,000 kg, total width: 2,800 mm, total length: 12,400 mm, total height: 5,100 mm, BOLDRINI RIBO 30HY/6000 – Flanging & Dishing Machine Manufacturer: BOLDRINI (Italy) Model: RIBO 30HY/6000 Type: Hydraulic Flanging & Dishing Machine Max. workpiece diameter: 6,000 mm Maximum plate thickness: 30 mm (cold forming) Year: 2002 Application: Dishing and flanging of tank heads, pressure vessel ends and dished ends. Length:12400mm Width:2800mm Height:5100mm Weight:42000kg Psdpfxszilu As Af Regp Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Wingspan: 3950 mm Pgsdpfx Afozp Iqgj Rjp Overall height: 3650 mm Load capacity: 4000 kg without lifting device

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Podpfx Afjzma Sko Rogp

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. Pjdpfx Afszma Tbe Regp The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: used, functionality: unexamined, Year of construction: 1978, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 400 mm, roller diameter: 622 mm, rotational speed (min.): 2 rpm, rotational speed (max.): 4 rpm, rotational speed (distance/time): 4,900 mm/min, pipe diameter (max.): 254 mm, tube wall thickness (max.): 10 mm, overall weight: 22,000 kg, total length: 3,900 mm, total width: 2,600 mm, total height: 3,300 mm, Equipment: emergency stop, BOLDRINI BSA 40 – Heavy-duty profile bending machine / roll for profiles For sale: a heavy-duty industrial profile bending machine, model BOLDRINI BSA 40, manufactured by BOLDRINI S.p.A., Italy. The machine is designed for bending and rolling metal profiles, tubes, angle profiles, rails, flanges, T-profiles, double T-profiles, and other structural elements with a large radius. It is suitable for the production of metal structures, halls, shipbuilding, tubular structures, tanks, flanges, and heavy industrial fabrication. Key data: Manufacturer: BOLDRINI S.p.A. Model: BSA 40 Year of manufacture: 1978 Serial number: 5936 Machine type: profile bending machine / angle bending roll / section bending machine Working system: 3 rollers Control: manual / electromechanical Drive: electric Weight: approximately 22,000 kg Condition: used, stored outside of a production line Available tools: set of rollers, dies, segments, and additional attachments, as shown in the pictures Approximate capacity according to model BSA 40: Angle profile: up to approximately 203 x 203 x 25 mm Tubes: up to approximately Ø254 mm Suitable for: tubes, L-profiles, T-profiles, double T-profiles, rails, flanges, and profiles with a large radius Equipment and features: Pjdpfx Afjzilzvo Rjgp The machine has a robust, heavy-duty construction, large working rollers, and mechanical adjustment via screw spindles. Working rollers, profile dies, additional segments, and attachments for various types of profiles are available. The electrical panel is present and includes contactors, relays, fuses, a transformer, terminal blocks, and controls. The machine has not been tested under load at the moment. Visible surface corrosion is present on some of the rollers, tools, and housing due to outdoor storage. An on-site inspection and electrical/mechanical check are recommended before commissioning.

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: Pgedpfx Afsyga Ugj Rsp • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: excellent (used), Year of construction: 1980, overall weight: 32,000 kg, total width: 8,000 mm, total length: 6,000 mm, total height: 4,200 mm, sheet thickness (max.): 8 mm, Flanging and dishing machine BOLDRINI - PAO 165 / 4700 Max. workpiece 4700 Ø Maximum sheet thickness 8 mm Pgsdpovcy Dcefx Af Rjp

Condition: used, functionality: fully functional, ASPIRAPOLVERE ASPIRALIQUIDI ASPIRATRUCCIOLI ASPIRATUTTO usato CAPIENZA 175 LT, KW 11, RIBO IN ACCIAIO INOX, revisionato a nuovo.15HP 380V 50 HZ, BOCCHETTONE D.100mm, Dim. 1300x1000x2500H, PESO KG. 330. Pgodpfxozhur Ij Af Rsp

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Podetpwrqjpfx Af Rjgp Extraction made of stainless steel. The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Vacuum of 2500 Pa

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: Podpsrfucqefx Af Regp 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: good (used), Technical details: Capacity: 3000 x 10 mm Further technical specifications to follow. Accessories: Various tools Condition: Pjdpfx Asyngctsf Rogp Overall in good and fully functional condition. The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock Pgsdovk T S Aspfx Af Rsp

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system Pgodovwgm Hepfx Af Rjp - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM Podpfx Afjzpzbls Rsgp - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Pgodpfx Afszp H R Es Rjp Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Pgsdpfx Aszc N U Ief Rep Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG Pjdpfx Afezphv As Rsgp 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: used, Year of construction: 2009, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Pgedpfx Afszmv Dco Rjp Year of Manufacture: 2009 CNC Control: Global Control Plus Track width: 4,000 mm 2 x Plasma with Hypertherm HPR260 power source Travel length: 10 m 2 x oscillating conveying tables Size: 3 x 3 m each Without filter system 22726ä

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 552 h, load capacity: 2,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,650 mm, motor manufacturer: TOYOTA 4Y, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,070 mm, fork width: 125 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 X 10 X 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB2500 | GAS | DUPLEX 4000 MM | FREE LIFT | FORK POSITIONER | SIDE SHIFT | OPEN CABIN | READY FOR WORK ✅ FULLY SERVICED MACHINE ✅ WARRANTY INCLUDED 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of creating maintenance costs, this machine is the perfect solution. We offer a reliable and fully prepared COMBILIFT CB2500 multidirectional forklift. The machine has undergone a complete technical inspection, comprehensive servicing, and detailed operational testing. It is ready for immediate deployment in production facilities, warehouses, logistics centers, steel yards, and timber operations. ⭐ KEY BENEFITS ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Brand new super elastic tires ✅ Excellent technical and cosmetic condition ✅ Only 552 operating hours ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to the customer's facility available 🔧 TECHNICAL SPECIFICATIONS 🏭 Manufacturer: COMBILIFT 📌 Model: CB2500 📅 Year of Manufacture: 2017 🏋️ Load Capacity: 2,500 kg ⛽ Engine: TOYOTA Gas 🕒 Operating Hours: Only 552 h ⬆️ Mast Type: Duplex 📏 Lift Height: 4,000 mm ↔️ Fork Positioner Width: 1,400 mm 🔩 Fork Length: 1,070 mm 🚜 Cabin: Open Operator Cabin ⚖️ Service Weight: 6,300 kg 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Overall Length: 1,550 mm Pjdpfx Afjzntuus Rsgp 📏 Overall Width: 1,500 mm 📏 Lowered Mast Height: 2,650 mm 🛞 TIRES Front: 16 x 7 x 10½ Rear: 22 x 10 x 16 ✅ Tire Condition: 100% New ⚙️ EQUIPMENT ✅ Hydraulic fork positioner ✅ Side shift ✅ Free lift ✅ Open operator cabin ✅ Working lights 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🏗️ Steel mills and steel service centers 🔩 Structural steel manufacturers 📦 Handling pipes, profiles, beams, and long loads 🏢 Indoor and outdoor applications 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are working with a company specializing exclusively in forklifts, sideloaders, multidirectional forklifts, and professional warehouse equipment. 🔍 Every machine undergoes a comprehensive technical inspection, full servicing, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. 🎯 WE PROVIDE ✅ Full pre-sale servicing ✅ Warranty coverage ✅ Professional technical support ✅ Leasing and financing solutions ✅ Transportation arrangements ✅ Export handling and customs documentation ✅ After-sales support 🏆 Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📞 CONTACT FT LOGISTICS Sp. z o.o. 🎥 We can arrange a live online machine demonstration, provide additional photos and videos, and prepare a customized transport quotation directly to your location. FT LOGISTICS 🚜 We Deliver Machines Ready for Work.

Condition: good (used), Technical specifications: Machine weight: 19,400 kg Total machine power consumption: 18 kW Max. grinding diameter: 630 mm Distance between centers: 4,000 mm Max. workpiece weight: 2,500 kg Pgsdpozpx Hrefx Af Rep

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool Pgedpszndq Hofx Af Rop - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm Psdpfx Aezmy Tbsf Rsgp

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air Pjdpfx Ajygtnasf Regp • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Podpezl D Exsfx Af Regp Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack