Gantry crane, overhead crane, cranes

Konecranes Portal Kran 4000 Kg (3520)

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options Ibodpfx Agoh I Nqwsysc - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates Iedpfxoiidm No Agysbc - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory Iedpsxabt Asfx Agyebc - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Iodpeza E S Djfx Agysbc

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Iodpfsng H T Ujx Agyjbc Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: new, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 120 mm, total height: 1,820 mm, total width: 1,780 mm, total length: 1,400 mm, table width: 500 mm, table length: 900 mm, workpiece weight (max.): 190 kg, distance table to spindle center: 390 mm, Equipment: documentation/manual, Table surface (swivel table): 900 x 500 mm Max. workpiece weight: 190 kg Travel in X-axis: 600 mm Travel in Y-axis: 450 mm Travel in Z-axis: 380 mm Quill travel in Z1: 120 mm Spindle speed range: 40 - 2000 rpm Number of gear stages: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1560 kg including extensive standard accessories, including: Work area enclosure 3-axis digital display CONTUR Hydraulic tool holder for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, including hydraulic unit Monitored spindle guard 3 conventional handwheels Complete electrical equipment for three-phase power 400 V, 50 Hz Ball screws for X, Y, and Z axes Vertical milling head Fixed swivel table, 900 x 500 mm clamping surface Swiveling device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guide rails Automatic central lubrication for the axes and ball screws Coolant system with pump Set (4 pieces) of support elements Including tool holder package consisting of: Ibedpfjhu Rwfox Agyec 1 x collet chuck ER40 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Condition: used, table length 2400 mm table width 1200 mm table height 880 mm Iodpfxjzwg I Ts Agyebc diameter of holes 28 mm Plate thickness 26 mm floor-plate height 200 mm

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Ibsdpjw Tbtkofx Agyjc Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table length: 3,060 mm, table height: 930 mm, total length: 4,350 mm, total width: 1,820 mm, total height: 2,680 mm, overall weight: 7,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Unique opportunity for those seeking a top-of-the-line, immediately available CNC press brake. We offer a SafanDarley E-Brake 100-3100, 100% electric, a NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production; the few operating hours are solely related to demonstration activities. Key features: • New machine from showroom • Never used in production • Ready for immediate delivery • High-efficiency electric technology • High bending accuracy and repeatability • Reduced operating and maintenance costs compared to traditional hydraulic presses Ibsdpfx Agszcmaboyoc Machine configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bending sequence calculation • Motorized and independent Z1+Z2 axes • Extra back gauge Z0+Z3 • Wila upper table with hydraulic locking • Wila lower table with mechanical locking and a set of bars for using Schiavi-type dies • Mobile aluminum front supports • Integrated photocells • Clear opening 590 mm / stroke 300 mm • Interface for Industry 4.0 The machine is offered for sale exclusively due to the renovation of the exhibition area and the replacement of the model currently in the showroom.

Year of construction: 2005, operating hours: 14,300 h, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, controller manufacturer: AMADA, controller model: AMNC-F (FANUC 180i-PB), overall weight: 18,000 kg, total height: 2,318 mm, punching force: 20 t, product length (max.): 5,526 mm, sheet thickness (max.): 3 mm, table width: 5,120 mm, number of axes: 5, This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details. • X-axis rapid traverse: 100 m/min • Y-axis rapid traverse: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm • Punching force: 200 kN • Hits per minute – 1 mm pitch (5 mm stroke): 780 hits/min • Hits per minute – 25.4 mm pitch, X-axis: 500 hits/min • Hits per minute – 25.4 mm pitch, Y-axis: 330 hits/min • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption – machine: 250 l/min • Air consumption – Air Jet vacuum: 250 l/min Ibjdpfey S A Tkjx Agyoc • Operating air pressure: 5 bar • Tooling visible in the photos • 4 tool cabinets • Technical documentation (manual scan) • Machine + included tooling package shown in the photos • Machine fully operational: Yes (replacement of one pneumatic hose required to eliminate a minor air leak) • Machine connected to power: Yes