Used Bollegraaf Hbc60A (30Kw) for sale (203)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 15,547 h, functionality: fully functional, machine/vehicle number: W99-031.010, pressing force: 60 t, pressure: 250 bar, power: 30 kW (40.79 HP), year of last overhaul: 2024, Equipment: documentation/manual, This used baler is being sold by Bollegraaf Recycling Solutions. This is an HBC60 (30kW) baler with vertical binding. This baler can be viewed in our overhaul workshop. This baler has only 15,547 hours. Hjdpfxeyux Nxj Af Eefh Technical condition is very good! (the baler has only baled paper) This baler comes with the following options: * intermediate hopper + distributor * belt feed chute * bale discharge, * wire roller platforms

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Hfedpfjzdn H Rsx Af Esh Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), SEVA SEV-200M three-phase electric motor A powerful industrial electric motor designed for driving machines, pumps, fans, compressors, and other industrial equipment. Hfodszagd Uspfx Af Eoh Technical data: • Manufacturer: SEVA • Type: SEV-200M • Power: 30 kW • Voltage: 400/690 V • Rotational speed: 2950 rpm • Frequency: 50 Hz • Current: 52.7 A / 30.4 A • Protection class: IP55 • Insulation class: F • Operating mode: S1 • Shaft: approx. 55 mm • Multi-groove pulley included Condition: Used item. Shows normal signs of use and storage. Visual condition matches the photos.

Condition: new, For sale: New Siemens electric motor Motor unused, warehouse condition No signs of use, fully operational, ready for work Technical data: Manufacturer: Siemens Model: 1LE16032AA434AB4 Z Power: 30 kW Rotational speed: approx. 2955 rpm Voltage: 400/690 V Frequency: 50 Hz Protection class: IP55 Energy efficiency class: IE3 Mechanical size: 200L Hfjdoyv Inuepfx Af Ejh Mounting type: B3 Robust industrial construction Ideal for industrial machinery, pumps, fans, and drive systems

Year of construction: 2022, operating hours: 3,863 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 006682, On behalf of our customer, we hereby offer a virtually new OI sorting. This installation can be tested in operation at the customer. The machines consist of; Sorting oi: 0050 Bunker belt with dosing drum BDF1200/2000*10000 0060 Ascending belt to screen HBT1200/1600*14000 Hjdpfxswq D Dns Af Ejfh 0070 Cardboard screen 1640*7000 Platform Cage ladder 0080 Adjustments to existing paper chain belt 0090 Switch cabinet included Operating hours only 3863 In consultation with the customer and Bollegraaf, a guarantee is possible under certain conditions See the attached PDF for a precise technical description per machine

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, fuel type: diesel, color: yellow, power: 30 kW (40.79 HP), output current: 54 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 30 kW (40.79 HP), nominal power (apparent): 38 kVA, continuous power: 30 kW (40.79 HP), continuous power (apparent): 38 kVA, total length: 2,110 mm, total width: 1,000 mm, total height: 1,350 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei STAGEV, type of cooling: water, HELVETICA POWER offers: 30 KW 38 KVA Generator / Diesel Generator ⭐️ Stage V (EU) / Euro 5 compliant – suitable and approved according to current European emission standards. ⭐️ Oil-tight chassis, ideal for construction sites, industry, agriculture, and many other applications. ⭐️ CE-compliant in accordance with applicable regulations ⭐️ Sound-insulated (Super Silent) design ⭐️ Equipped with emergency power switch / ATS (Automatic Transfer Switch) unit for backup power operation ⭐️ Digital control panel plus integrated remote control ⭐️ Yunnei Stage V diesel engine designed for continuous operation ⭐️ Stamford type (licensed CN): CE-certified high-quality brushless synchronous alternator with 100% copper winding ⭐️ AVR system (automatic voltage regulation dependent on load) ⭐️ The generator is delivered with a practical, heavy-duty yellow tarpaulin truck cover Warranty / Guarantee / Service ⭐️ One-year factory warranty! ⭐️ Optional: up to 2-year extended warranty, significantly exceeding industry standards (extendable upon request). ⭐️ Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) ⭐️ Service available throughout Switzerland and Europe. Hjdpfx Ajwbkkpof Ejfh Payment / Delivery ⭐️ Payment: due at purchase. ⭐️ Delivery available throughout mainland Europe for an additional charge. 🚚 Pickup: from our warehouses in Kefikon (TG, Switzerland) or Konstanz (Germany) 🚚 Worldwide delivery upon request 👍 Dealer inquiries welcome – contact us! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ More Models & Configurations ⭐️ Other power ratings available (approx. 7 kW to 100 kW) ⭐️ Stage V (EU) / Euro 5 compliant versions ⭐️ Alternative engine options available (e.g. Cummins, Deutz, Volvo) ⭐️ Optional features: larger tank, auxiliary tank, tank and water heating ⭐️ Many versions available from stock in CH / DE. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Keywords: power generator, generator, emergency generator, backup generator, power unit, energy generator, power supply unit, standby power unit, emergency power supply, NEA, backup power, replacement power, backup power supply, power supply, power source, autonomous power supply, off-grid operation, site power, construction site generator, event power, camping power, outdoor power supply, diesel generator, petrol generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, single-phase generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, silent generator, super silent generator, sound-insulated generator, mobile generator, portable generator, stationary generator, home backup power, commercial power, industrial power, agricultural generator, construction equipment, workshop power, server backup, PV backup, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power maker, power device, backup power device, diesel power unit, construction site power unit, 22KW 28KVA 30KW 38KVA 34KW 43KVA 44KW 55KVA 19KVA 15KW 38KVA 30KW 63KVA 50KW 125KVA 100KW 100KVA 80KW

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. Hfsdpfxsxvh Dyj Af Ejh This is a HBC80 baler (45kW) with cross wires. Bale press built: 1997 Baler Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Intermediate hopper Conveyor chute Control cabinet Schneider PLC

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. The chain conveyor is of the type Bollegraaf HBT 2250/2000. The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Year of construction: 2008 Drive power: 7.5 kW Length of feed belt: 8,300 mm Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Inclined belt sidewall height: 800 mm Hedpfx Afeyu Stko Eefh Weight: 16 t

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: Machinenummer 230067.020, pressing force: 60 t, power: 45 kW (61.18 HP), operating pressure: 250 bar, Bollegraaf Recycling Solutions, the original manufacturer of this mobile Bollegraaf baler, hereby offers the following machine(s) FOR RENT ONLY: Year of construction: 2022 Weight excl trailer: 22.000 kg Mobile Baler Volume capacity m3/hr max. 365 334 321 301 Hsdpfx Ash I T Ibef Eefh Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW

Condition: ready for operation (used), functionality: fully functional, Gantry crane Bollegraaf 30 tons, 32 meters span, 10 meters lifting height Hfodjw S Ea Sopfx Af Eoh

Condition: used, 1x gantry crane Working load: 2 x 10,000 = 20,000 kg Span: 24 m Cantilever: 1 x 3 m Lifting height above rail: approx. 8 m Hook travel: 8 m Hfjdoyx Dyfepfx Af Eoh Radio control Complete with crane rail

Condition: reconditioned (used), Year of construction: 2014, operating hours: 24,967 h, functionality: fully functional, machine/vehicle number: 004283-0030, pressing force: 122 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, warranty duration: 24 months, year of last overhaul: 2026, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. Hjdpfx Afexcir Ee Eefh This is a baler HBC120s (90kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. Hedjtvat Tepfx Af Eofh After refurbishment, this baler is sold with a 2-year warranty.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hfodpfx Astvau Aof Ejh Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Baler weight: 19000 kg Weight conveyor: 6000 kg Hfedpfjxtmyzjx Af Esh Engine: 30 kW Vertical binding Number of wires: 5

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 8028-18, overall weight: 550 kg, total length: 1,300 mm, total width: 950 mm, total height: 1,360 mm, space requirement length: 1,800 mm, space requirement width: 1,500 mm, space requirement height: 2,500 mm, motor manufacturer: PM Synchronous Motor, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 258 m³/h, operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, noise level: 70 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, AIRPRESS Industrial Compressed Air System for Sale Professional industrial compressed air system for sale, suitable for metal fabrication, CNC machining, laser cutting, woodworking, painting, manufacturing facilities, and other industrial applications. The system is designed as a ring-main compressed air network, ensuring stable pressure and maximum airflow at every workstation. Included Equipment: AIRPRESS APS 40 IVR X Screw Compressor Power: 30 kW (40 HP) Variable Speed Drive (IVR) Maximum pressure: 10 bar Air delivery: up to 4,300 l/min Direct drive 1:1 transmission PM Synchronous Motor Noise level: only 70 dB(A) Air connection: 1¼" Power supply: 400V / 50Hz / 3 Phase Weight: 550 kg Dimensions: 1300 × 950 × 1360 mm Vertical Air Receiver Tank Capacity: 1,000 liters Height: 2,250 mm Weight: 280 kg AIRPRESS APX-52 Refrigeration Air Dryer Capacity: 5,200 l/min Dimensions: 460 × 560 × 789 mm Weight: 65 kg Cyclone Water Separator Connection: 1" Capacity: 6,085 l/min Compressed Air Distribution System Ring Main Air Network Total perimeter length: 172 m 32 mm aluminum piping Additional 25 mm and 32 mm branch lines 10 filtration and regulation (FR) stations 9 workstation drop points 2 quick-connect outlets per FR station Adjustable pressure regulation at each workstation Advantages: Energy-efficient variable speed drive technology Stable air pressure throughout the system Low operating noise Suitable for continuous 24/7 industrial operation High-quality European-made aluminum piping Corrosion-free air distribution network Easy to dismantle, relocate, and expand No welding or soldering required AIRPRESS 10-year warranty on the air distribution system Professional industrial-grade installation Original Investment Value: Item / Value (Excl. VAT) AIRPRESS APS 40 IVR X Compressor / €9,560 1,000 L Air Receiver / €1,165 APX-52 Air Dryer / €1,920 Cyclone Separator / €162 Ring Main Air System with Installation / €6,995 Connection Materials / €400 Total Original Value / €20,202 Equivalent to approximately €24,445 including VAT. Applications: Suitable for: CNC machining centers Laser cutting machines Metal fabrication workshops Welding facilities Powder coating and painting operations Woodworking factories Automotive workshops Manufacturing plants The system provides clean, dry, and stable compressed air for demanding industrial applications. Hfedezdcdxspfx Af Eeh Condition: Excellent and NEW. Location: Lithuania Price: €11,900 + VAT Inspection available by appointment. Loading assistance can be arranged.

Condition: used, 30kw 280BAR 2 PIECES IN STOCK Hfodpecl R Absfx Af Ejh

Condition: new, functionality: fully functional, Year of construction: 2026, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Hfodpfxeikivfo Af Ejh Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 6kW mit CE, laser power: 12,000 W, sheet thickness (max.): 80 mm, sheet thickness steel (max.): 80 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, table length: 6,000 mm, table width: 2,500 mm, working length: 6,000 mm, working width: 2,500 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 13,500 kg, total length: 14,500 mm, total width: 4,500 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser cutting machine 6025, 30 kW – Overview Safety & Protection Fully enclosed metal enclosure with radiation-shielding doors and windows. Environmentally friendly and safe for operators. Work platform High and low, parallel platform: Front end: Laser cutting. Rear end: Loading and unloading. No mutual interference → increased work efficiency. Machine structure 30 kW bed structure: Time-shared, segmented dust extraction. Excellent heat dissipation, resistant to thermal influences. Industrial accessories: Air conditioning, special cooling system, constant temperature & humidity → stable performance & longer service life. Precision guarantee: Bed processed by a large gantry milling machine. Industrial guide rails, gears, screw supports. Complete servo control, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software package: Market-standard, safe, and user-friendly software. Hfodezb Uinjpfx Af Esh Supports intelligent networking. Professional nesting software: CypNest (included). Core components Laser cutting head BOCI BLT442 Laser source MAX 30 kW, CE Water cooler HANLI 20 kW Guide rail TAIWAN DTX 30+20+20 Frame TAIWAN JT Reducer Germany Techmach Camera 3 pieces Servo motor BOCHU Proportional valve Felton Electronic components SCHNEIDER Triple air inlet Nitrogen, oxygen, air Lubrication system Automatic oil supply system Accessories 30 protective lenses, 30 nozzles, tool kit. Optional: Air compressor ARS-30HP-XF-1.6 MPa, dust collector 11.5 kW.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley. Hfjdpfx Afezcf Dlj Esh

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm Hfedsy Ayiqopfx Af Eeh - Bale width: 1100 mm - Bale height: 770 mm

Year of construction: 2013, condition: excellent (used), Screw compressor ALUP LARGO 30-10 machine after service Technical data: capacity:4,68 m3/min; 30KW motor; pressure max. 10bar; mileage;8236h; Hedpfx Afjpkzg Eo Ejfh Year;2013 Compressor fully operational, net price: 19500zł gross price: 23985zł

Condition: excellent (used), Year of construction: 2004, I sell the horizontal wood shredder DI Mechanik SDOP 400/3, Made in Slovakia Year 2004 Cylinder system with 3 knives. 400x150mm input in the shredder Motor 30KW Hedpfx Afot S Eune Ejfh Productivity apprx 5-7 m3 / hr. Condition like new. Avialable immediately.

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Hfsdpfx Afsibwarj Esh Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit !

Condition: good (used), Year of construction: 1989, functionality: fully functional, main motor 30kW inlet diameter 480 x 170mm 380V power supply Hfsdpfeqwgvtsx Af Ejh for woodchips, sawdust