Used Cat Other for sale (21,637)

Condition: used, machine/vehicle number: 1383A, mileage: 152 km, power: 127 kW (172.67 HP), first registration: 07/1993, fuel type: diesel, overall weight: 9,716 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, trailer coupling, TUV is NEW!!! truck registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M109A4 is equipped with: Tire pressure regulation system, with which the tire pressure can be changed while driving (ideal for soft terrain, sand, mud.....), four-wheel drive, 6 cylinder Caterpillar diesel engine with turbo and 6598cm? displacement (Pump-Duse without electronics), 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering, air-assisted brakes, 3 front seats, cab has a soft-top and can be driven open, the body has the dimensions L/W/He L/W/H 3660 / 2290 / 1950mm inside, airing, electrical installation with sockets, interior lighting, trunk door at the rear, 3 windows on each side, the km indication are miles, there are several M109 in stock with a speedometer reading of 79 miles to 2155 miles, year of construction 1989 to 1993, driving license class 2 (truck) Perhaps with a little slimming down to 7.49T, tire size 14.5R20 (very good).e 14.5R20(very good condition) Tubeless , Highest speed 90 km / h , 24Volt power supply , The M109A4 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Bodpfx Amsqx Sxdensdd

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. Bdedpfxezht H Re Amnjd • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,127 h, pressing force: 138 t, stroke length: 200 mm, total width: 1,750 mm, total height: 2,550 mm, overall weight: 10,200 kg, controller manufacturer: DELEM, controller model: DA-66T CNC, product length (max.): 3,640 mm, number of axes: 6, This 6-axis RICO PRCN Synchro 30135 was manufactured in 2013. It features a press force of 1350 kN and a bending length of 3100 mm. The machine is equipped with a powerful 11 kW motor and offers advanced CNC controlled bending aid systems. If you are looking to get high-quality bending capabilities, consider the RICO PRCN Synchro 30135 press brake we have for sale. Contact us for further details. • Distance Between Side Frames: 2600 mm • Motor Power: 11 kW • Open Height: 400 mm • Throat Depth: 400 mm • Approach Speed: 200 mm/s • Working Speed: 0–10 mm/s • Return Speed: 150 mm/s • X-Axis Speed: 500 mm/s • X-Axis Positioning Accuracy: ±0.05 mm • R-Axis Travel: 150 mm • R-Axis Speed: 170 mm/s • R-Axis Positioning Accuracy: ±0.20 mm • R-Axis Repeatability: ±0.20 mm • Z1-Z2 Travel Range: approx. 2500 mm • Z1-Z2 Speed: 2000 mm/s • Z1-Z2 Positioning Accuracy: ±0.10 mm • Z1-Z2 Repeatability: ±0.10 mm • Laser Safety System: Fiessler AKAS LC-II F • Hydraulic System: Hoerbiger Bsdpfx Amszgggnonsdd • Product and Tool Memory: 64 MB • Interfaces: 2 × USB, RS232C, Network Interface, PLC Interface • Independent Z1-Z2 Finger Positioning: Yes • Free-Moving Right Backgauge Finger: Yes • Right Finger Travel Range: 200 mm • Relative Right Finger Adjustment: +100 mm / -100 mm • Pneumatic Sheet Support Arms with Ball Rollers: Yes • CNC Controlled Bending Aid System: ACF1 • Number of Motorized Bending Aids: 2 • Bending Aid Load Capacity: approx. 150 kg per unit • Bending Aid Support Range: approx. 900–1500 mm • Bending Aid Width per Arm: approx. 350 mm • Bending Aid Height Adjustment: ±60 mm • Bending Aid Depth Adjustment: 0–60 mm • Bending Aid Accuracy: ±0.2 mm • Support Arm Working Area: 500 mm • Maximum Box Height with Raised Tooling System: up to 240 mm • Tool Clamping: Pneumatic Upper Clamping • Operating Hours: approx. 11,270 h Technical Specification Bending Length 3100 mm

Condition: new, functionality: fully functional, power: 3.5 kW (4.76 HP), gearing type: automatic, fuel type: electric, color: original, overall weight: 3,500 kg, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MZatbm01, Equipment: CE marking, This automatic bottle blowing machine that we are introducing to you today, it is a kind of instrumental equipment for plastic bottle production, it can transform plastic granules or pre-made bottle blanks into plastic bottles of various sizes and shapes through an automated process, we can realize any product you make for you. This machine integrates mechanical, electronic and pneumatic technologies and is very intelligent. Whether it is preform loading, heating, stretching, blow molding or finished bottle discharging now only need one of these machines can help you solve, without a lot of human intervention, which not only help you save labor costs, but also help you greatly improve production efficiency and ensure product quality stability. Bjdpfx Amsxx Ndgenjdd

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Fb001, warranty duration: 12 months, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, type of input current: three-phase, overall weight: 100 kg, power of the servo motor: 1 W, film width: 38 mm, compressed air connection: 0.25 bar, input voltage: 220 V, nominal power: 0.5 kW (0.68 HP), heating capacity: 0.8 kW (1.09 HP), Equipment: CE marking, Performance and features: 1). The machine is mainly made of quality stainless steel; the parts contact the material is made of 304# stainless steel and food grade plastic tubes and comply with hygienic standards for food; Bodpfx Aoxmwkqomnjdd 2).It can fullfill accurate filling and capping at one operating position. 3). The machine uses flow meter for filling which is with high filling precise. 4). All its pneumatic and electric parts are from world famouse brand which are good quality. 5). can achieve vacuum pumping before they are filled, thereby helping extend the shelf life of the product. 6) Can add nitrogen function according to clients requirement. Application: It can be widely used in bag-in-box filling applications for such liquid materials as wine, edible oil, fruit juice, additives, milk, syrup, alcoholic beverages and concentrated seasonings.suitable for all kinds of bags and caps.

Year of construction: 2008, condition: ready for operation (used), pressing force: 163 t, stroke length: 700 mm, Hydraulic 4-Column Press manufactured in 2008. This Hymag HS 4 160 features a press force of 1,600 kN and a stroke of 700 mm, making it suitable for metal pressing applications. It is equipped with a PLC-controlled system for enhanced operation. If you are looking to get high-quality metal forming capabilities, consider the Hymag HS 4 160 machine we have for sale. Contact us for further details. • Manufacturer: Hymag • Machine Type: Hydraulic 4-Column Press • Hydraulic Pressure: 280 bar • Main Motor Power: 55 kW • Voltage: 400 V • Current: 96 A • Secondary Motor Power: 7.5 kW • Voltage: 400 V • Current: 15 A • Oil Capacity: 600 L Bedpfx Aezd Ez Eomnjdd • Control System: PLC-Controlled Hydraulic Press

Year of construction: 2013, condition: ready for operation (used), pressing force: 163 t, stroke length: 700 mm, Hydraulic 4-Column Press manufactured in 2013. This Hymag HS 4 160-K features a press force of 1,600 kN and a stroke of 700 mm, making it suitable for metal pressing and forming applications. With a main motor power of 55 kW, this machine is designed for efficiency and reliability. If you are looking to get high-quality metal pressing capabilities, consider the Hymag HS 4 160-K machine we have for sale. Contact us for further details. • Manufacturer: Hymag • Machine Type: Hydraulic 4-Column Press • Application Type: Metal Press / Forming Press • Hydraulic Pressure: 305 bar • Main Motor Power: 55 kW • Voltage: 400 V • Current: 105 A • Secondary Motor Power: 7.5 kW • Voltage: 400 V • Current: 15 A • Cooler Motor Power: 1.5 kW • Voltage: 400 V • Current: 5.1 A • Oil Capacity: 600 L Bdsdezd Ezljpfx Amnsd

Year of construction: 1998, operating hours: 6,656 h, condition: ready for operation (used), overall weight: 12,000 kg, pressing force: 61 t, stroke length: 1,000 mm, Hydraulic 4-Column Coining Press manufactured in 1998. This August Luigart & Sohn GmbH & Co. KG 4 SPY 60 SO features a press force of 600 kN and a stroke of 1000 mm. It has a tool clamping area of 1700 × 1200 mm and a total weight of 12,000 kg. If you are looking to get high-quality metal forming capabilities, consider the August Luigart & Sohn GmbH & Co. KG 4 SPY 60 SO machine we have for sale. Contact us for further details. • Manufacturer: August Luigart & Sohn GmbH & Co. KG (ALN) • Machine Type: Hydraulic 4-Column Coining Press • Hydraulic Pressure: 236 bar Bdodpfxezd Egzj Amnsd • Opening Height: 1450 mm • Main Motor Power: 24.75 kW (22 + 2.2 + 0.55 kW) • Voltage: 415 V • Frequency: 50 Hz • Tool Clamping Area: 1700 × 1200 mm • Max. Upper Tool Weight: 1,200 kg • Oil Capacity: approx. 650 L

Year of construction: 1997, condition: ready for operation (used), overall weight: 12,500 kg, pressing force: 204 t, stroke length: 400 mm, Hydraulic 4-Column Press manufactured in 1997. This August Luigart & Sohn GmbH & Co. KG (ALN) 4 SPY 200 SO features a press force of 2,000 kN and a stroke of 400 mm. It has a tool clamping area of 1,460 × 890 mm and a maximum upper tool weight of 2,500 kg. If you are looking to get high-quality metal pressing capabilities, consider the August Luigart & Sohn GmbH & Co. KG (ALN) 4 SPY 200 SO machine we have for sale. Contact us for further details. • Manufacturer: August Luigart & Sohn GmbH & Co. KG (ALN) • Machine Type: Hydraulic 4-Column Press • Hydraulic Pressure: 285 bar • Opening Height: 800 mm • Main Motor Power: 32.5 kW • Voltage: 415 V • Frequency: 50 Hz • Tool Clamping Area: 1,460 × 890 mm • Max. Upper Tool Weight: 2,500 kg Bedpfozd Efdsx Amnsdd • Oil Capacity: approx. 850 L

Year of construction: 2015, condition: ready for operation (used), pressing force: 163 t, stroke length: 700 mm, Hydraulic 4-Column Press manufactured in 2015. This HYMAG HS 4 160-K3 features a press force of 1,600 kN and a stroke of 700 mm, making it suitable for various metal forming applications. With a main motor power of 55 kW, this machine is designed for efficiency and reliability. If you are looking to get high-quality pressing capabilities, consider the HYMAG HS 4 160-K3 machine we have for sale. Contact us for further details. • Machine Type: Hydraulic 4-Column Press • Hydraulic Pressure: 305 bar • Main Motor Power: 55 kW Bodpszd Dihefx Amnsdd • Voltage: 400 V • Current: 98 A • Secondary Motor Power: 7.5 kW • Voltage: 400 V • Current: 15 A • Cooler Motor Power: 1.5 kW • Voltage: 400 V • Current: 4 A • Oil Capacity: 600 L

Condition: new, Year of construction: 2025, machine/vehicle number: CATXQP20KXPZ00144, fuel type: diesel, motor manufacturer: Cat C2.2, General information Field of application: Construction Bdjdpfozayxfjx Amnjd Weights Empty weight: 815 kg Functional Generator capacity: 20 kVA Dimensions of cargo space: 172 x 100 x 130 cm CE mark: yes Other information Fuel consumption: 5.5 Liter / hour at 100% Load Generator: Cat LC1100 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 56 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames - Noise Rating: 65 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, machine/vehicle number: Produktpalette, axle configuration: 1 axle, tire size: 11,5/80-15,3, Additional information: 40 mm drawbar eye Bdedpfx Amei Riyhonod Fifth wheel plate: Jost Fifth wheel height approx. 1000 mm Support leg: OMS Tires: 11.5/80-15.3 Alliance Without suspension Tire load capacity: 5800 kg at 30 km/h + 5150 kg at 40 km/h Not approved for road use, for internal use only!

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 900 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 660 mm, overall weight: 3,050 kg, table load: 1,250 kg, number of axes: 3, This 3-axis Other SHEFFIELD Endeavor 9.15.7 was manufactured in 2003. It features an X-axis travel of 900 mm, Y-axis travel of 1500 mm, and Z-axis travel of 660 mm. The machine is equipped with a granite table and brushless linear motors on the X and Y axes. If you are looking to get high-quality measurement capabilities, consider the Other SHEFFIELD Endeavor 9.15.7 CMM machine we have for sale. Contact us for further details. • CE Marked • Maximum 3D Speed: 39 m/min • Maximum 3D Acceleration: 1.7 m/s² • Voltage: 240 V • Accuracy Standard: DIN EN ISO 10360-2 • Specified Accuracy Temperature Range: 15°C – 25°C Bodpfx Aozcwfbemnjdd • Volumetric Length Measuring Error (MPEE): 2.8 + L/263 µm • Volumetric Probing Error (MPEP): 3.0 µm • Maximum Hourly Temperature Gradient: 2°C/h • Maximum Daily Temperature Gradient: 5°C/24h • Maximum Spatial Temperature Gradient: 1°C/m • Permissible Ambient Temperature Variation: ±5°C • Granite Table • Threaded Inserts: ISO M8 x 1.25 • Air Bearing Axes • Brushless Linear Motors on X and Y Axis • Renishaw High-Resolution Linear Scales • Geometric Error Compensation • Automatic Volumetric Temperature Compensation • Probe Head: Renishaw PH10MQ • Probe Head Weight: 645 g • A-Axis Indexing Range: 0° to 105° in 7.5° Increments • B-Axis Indexing Range: ±180° in 7.5° Increments • Positioning Repeatability: 1 µm • Maximum Extension Length: 300 mm • Probe Head Mount: M10 Thread • Probe Connection Thread: M8 Thread • Probe System: Renishaw TP20 • Reference Sphere Diameter: 19 mm • Parallel Port Sale WITHOUT Software License

Condition: used, Year of construction: 2015, operating hours: 2,997 h, CAT 908M wheel loader, year of manufacture: 2015, operating hours: 2,997 h, quick coupler, fork, 1.3 m³ bucket, radio, 20 km/h, engine: CAT C3.3 [55 kW/75 hp], weight: 6,460 kg, immediately ready for operation. Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! Quick coupler system. Bdedpfx Aey T D A Nemned = Further information = Please contact Tobias Ebert for further information.

Condition: new, Year of construction: 2025, machine/vehicle number: CAT0DE65CN7300532, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 992 kg Functional Generator capacity: 65 kVA Dimensions of cargo space: 230 x 96 x 140 cm CE mark: yes Other information Fuel consumption: 11.3 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 103 l Additional information Please contact Team DPX for more information = Additional options and accessories = Bdedjzhzyxspfx Amnjd - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C15ALXJ07918, fuel type: diesel, motor manufacturer: Caterpillar C15, General information Field of application: Construction Weights Empty weight: 5.033 kg Functional Generator capacity: 500 kVA Dimensions of cargo space: 493 x 166 x 232 cm CE mark: yes Other information Fuel consumption: 77.9 Liter / Hour at 75% Load Generator: Caterpillar A2975L4 Frequency: 50 Voltage: 400 Bjdjzhzyljpfx Amnjdd Drill equipment: Tank, Battery, Control Panel Water tank volume: 842 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CAT000C9LKX904811, fuel type: diesel, motor manufacturer: Caterpillar C9, General information Field of application: Construction Bdjdozhzx Uopfx Amnjd Weights Empty weight: 3.404 kg Functional Generator capacity: 300 kVA Dimensions of cargo space: 430 x 141 x 217 cm CE mark: yes Other information Fuel consumption: 46.9 Liter/Hour at 75% Load Generator: Caterpillar LC5114J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 610 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CAT000C9VLX905915, fuel type: diesel, motor manufacturer: Caterpillar C9, General information Field of application: Construction Weights Empty weight: 2.859 kg Functional Generator capacity: 275 kVA Dimensions of cargo space: 398 x 141 x 203 cm CE mark: yes Other information Fuel consumption: 43.6 Liter/Hour at 75% Load Generator: Caterpillar LC5114H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 610 l Additional information Bodpfxszhzxzs Amnsdd Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: CAT000C9VLX905057, fuel type: diesel, motor manufacturer: Caterpillar C9, General information Field of application: Construction Weights Empty weight: 2.859 kg Functional Generator capacity: 250 kVA Dimensions of cargo space: 398 x 141 x 203 cm CE mark: yes Other information Fuel consumption: 40.3 Liter / Hour at 75% Load Generator: Caterpillar LC5114H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 500 l Additional information Please contact Team DPX for more information Bjdpfx Aezhzxbomnjdd = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 9G500208, fuel type: diesel, motor manufacturer: Caterpillar 3512B, Field of application: Construction Bdsdpfx Amszhzw Densd Empty weight: 14.250 kg Generator capacity: 1.421 kVA Dimensions of cargo space: 605 x 266 x 232 cm Generator: Caterpillar SR500 Frequency: 60 Voltage: 600 Please contact Team DPX for more information

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 851 kg Functional Generator capacity: 33 kVA Dimensions of cargo space: 196 x 90 x 134 cm CE mark: yes Other information Fuel consumption: 5.8 Liter per Hour at 75% Load Bdjdpey R I Evjfx Amnjd Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 50 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections Bdsdpfoywcr Dsx Amnjd electrical service ⸻ CONDITION used visually in good condition

Condition: used, machine/vehicle number: 1329, maximum load weight: 1,050 kg, overall weight: 1,600 kg, axle configuration: 1 axle, first registration: 04/1994, TUV can be made new on request, off-road trailer ideal for Mercdes G-model, Landrover, Toyota Landcrisier and other off-road vehicles in good condition, no rust (hot-dip galvanized) really great condition!!!! Immediately ready for use, directly from the military very well maintained and serviced !!! Equipped with overrun brake with automatic jerk, handbrake, tailgate, three-chamber jerk lights, military towing box and ball head coupling, Din towing box can also be provided for an extra charge, wooden floor (screen printing plate), Mercdes G rims, high adjustable stable support at the rear right (is very helpful if you want to mount a living tent on the trailer), 12 pole NATO plug (can also be converted to civilian plug), there are 4 versions in stock Flatbed open box Flatbed inside dimensions L/W/H 2050/1040/490, tarpaulin with bows inner height 820 mm, high tarpaulin with bows inner height 1550 mm, closed box with hinged lid supported by gas pressure springs inner height 850 mm, good tires (7.50 R 16), the trailer is very stably built, no cheap goods and much more. Axle and overrun brake are from ALKO (super spare parts supply German brand) - Approx. 15 trailers HMK 92 are in stock! ! - The HMK M92 is the only trailer for off-road vehicles - Several other all-wheel drive vehicles and other military vehicles are still available in my offer. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Bedoqx S Awjpfx Amnsdd

Condition: used, machine/vehicle number: 1379A, mileage: 1,638 km, power: 179 kW (243.37 HP), first registration: 11/1986, fuel type: diesel, overall weight: 15,322 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, parking heater, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M944A1 is equipped with: All-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body has the dimensions: L/W/H 5550 / 2200 / 2200.e L/W/H 5550 / 2220 / 1910mm inside, equipment of the body: lathe, tool cabinet with drawers, grinding stand, welding unit, permanently installed power generator 110 Volt 31KVA driven by vehicle engine (Cummins with 105 operating hours) via auxiliary drive, 2-piston compressor with compressed air tank, air connections in the body, trolley, loader, impact wrench large and small, grinding witch, air connections in the body, trolley, loading device, impact wrench large and small, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch. and small, grinding witch, magnetic drill, vice, large auxiliary heating and ventilation, many sockets, interior lighting, both sides and the rear of the body can be opened, the km are miles, driving license class 2 (truck), tire size 14.00R20 (very good condition) tubeless, top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M944A1 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Bjdpfxjqx Sxae Amnodd

Condition: used, machine/vehicle number: 586A, overall weight: 2,000 kg, axle configuration: 1 axle, first registration: 06/2004, The mobile fitting ramp is in a fantastic condition directly from the military Well maintained and cared for, as good as new condition, the trailer is equipped with: 1 crank support at the front, 2 hydraulic supports at the rear with these the loading edge can be raised from 1030 mm to 1530 mm, the platform can be extended to a length of 5360 mm with the folding rear ramps, the total length of the ramp is 5840 mm. - The adjustment ramp is adjustable in height up to a height of 1580 mm - load capacity 2.5 tons, the ramp is made of aluminium and coated with anti-slip. - The hydraulic drive is 220Volt, extension cable with retraction mechanism integrated in the trailer. - The trailer has the dimensions L/W/H 5240/ 1920 / 1140 in folded driving mode. - The drawbar is height-adjustable - the trailer is overrun-braked with 40mm drawbar (can also be converted to a ball coupling, not included in the price) - tire size 215 R 14C, other extras: support wheel for cranking. - New price of the trailer was 50000 CHF - 3 pieces in stock ! ! - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Bdsdpfsqx S A Nsx Amned