Used Clean Room Iso 8 for sale (44,656)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. Bdodpfxoq H H Ruj Abteg The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) Bdedpfx Aozuy Injbteg • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-Phase

Year of construction: 2016, condition: excellent (used), functionality: fully functional, 10 m2 workspace, 4 m2 dressing area 16 x Filter Fan Units Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Brecon BCPS cassette system: Panel thickness: 70 mm Maximum wall height: 6 meters Standard panel width: 1,200 mm Bdodpezgcy Dsfx Abteg Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles Bdodpfezuy Stjx Abtjg • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Bdodpfx Abspcgy Reteg

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Cleanrooms & FFU controllers – available immediately, at attractive prices! Are you looking for a professional cleanroom solution? Then you’ve come to the right place! We offer high-quality cleanroom systems and control technology directly from our own stock – without long delivery times, at fair prices. Bdodperlm Rvefx Abteg Filter Fan Unit (FFU) controllers – grab them now! ✔ 10 units available immediately ✔ Including digital control unit ✔ New – €1,000 per unit Your cleanroom – tailored to your dimensions, according to your requirements We plan, deliver, and build your cleanroom – completely according to your wishes. Our modular wall elements enable flexible room concepts with glazing and integrated ventilation technology. The quality of our work can be seen in the photos – a successfully completed project for a customer in the Netherlands. Unbeatable value for money: Starting from just €500-€750 per m² of floor space – including glazing, for a room height of 2,500 mm. Example: A cleanroom measuring 4 m × 4 m costs you from €8,000 net – ready for use and built according to your specifications. Contact us today! We will quickly and easily create a customized offer for you – for any size. Your team at Impuls Engineering GmbH

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Key Performance Capabilities - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Advanced Hygiene & Ultra-Clean Standards - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station Bedezqtkzopfx Abtjdg * Station 7: Expiration date print station * Station 8: Integrated gripper

Year of construction: 2008, condition: used, filling amount 180 l injection pressure 1,3 bar 700 l/min diameter 800 mm voltage 400 V frequency 50 Hz dimensions ca. 1200x1300x1100 mm Bsdpowgi Epofx Abtedg weight of the machine ca. 300 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: FK 524365, FOR SALE: MINIMALLY USED Ecoclean EcoCcore DRY CLEANING MACHINE, max. basket size 650x470x400 mm (bearing surface 630x450 mm) / batch weight 70-200 kg including basket, 50 washing programs, heat recovery, 10 batches/hour. Bdodpfx Aszl A Rgebteg Ecoclean EcoCcore solvent-based cleaning machine, max. basket size 670x480x400 mm, max. load weight 200 kg, approx. 8-10 loads/hour, WLAN connection, loading ramp, 4453 operating hours, serviced at 4450 hours.

Condition: ready for operation (used), Year of construction: 2016, spindle motor power: 11,000 W, spindle speed (max.): 8,000 rpm, overall weight: 3,900 kg, total width: 1,390 mm, total height: 1,745 mm, bar diameter (max.): 38 mm, product length (max.): 3,020 mm, number of axes: 8, This 8-axis UTIMAC ISOLA XD 38 II Siemens was manufactured in 2016. It features a maximum bar capacity of Ø38 mm and a spindle speed of 8,000 rpm. The machine includes a counter spindle with a speed of 7,000 rpm and a rapid traverse of 32 m/min. If you are looking to get high-quality turning capabilities, consider the UTIMAC ISOLA XD 38 II Siemens swiss type turning machine we have for sale. Contact us for further details. • Main spindle: • Max. bar capacity: 38 mm (42 mm optional) • Stroke (versions): H = 320 mm; N = 90 mm; NH = 90 / 160 mm • Rapid traverse: 32 m/min • Counter spindle: • Max. bar capacity: 38 mm • Stroke: 280 mm • Speed: 7,000 rpm • Motor power: 11 kW • Vertical tool plate axes X1–Y1: • Turning tools: 5 (16x16) • Standard rotating tools: 5 • Rotating tools for B-axis: 4 • Fixed spindle stations: 5 • Motorized tool power: 2.6 kW • Motorized tool speed: 6,000 rpm • Rapid traverse: 32 m/min • B-axis: • Angular adjustment: 145° (+90° / -55°) • Number of tools: 6 (3 ER16 + 3 ER11) • Motorized tool speed: 6,000 rpm • Motor power: 1.9 kW • HY2 version: Bsdpfx Abey U H Nnetodg • Tool stations: 8 (4 fixed + 4 motorized) • Coolant tank capacity: 230 L Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating pressure: 50 bar, high-pressure hose length: 1,500 mm, empty load weight: 100 kg, input voltage: 230 V, water tank capacity: 100 l, warranty duration: 12 months, We offer for sale a Pressure Washer combined with a vacuum cleaner AP 100/50M. The machine allows for the removal of residual water left on surfaces after pressure cleaning, which enables use even on floors without a drain. It is recommended for cleaning bathrooms and washrooms that need to be accessible immediately after cleaning. The AP 100/50 M is ideal for hotels and SPA centers, public facilities (stations, airports), industrial baths, restaurant kitchens, sports facilities, and many more. This is an essential machine for cleaning companies managing such premises. Condition of the machine – Very good Year of manufacture: 2014 All machines purchased from us come with a 12-month WARRANTY. Technical specification: Clean water tank: 100 l Dirty water tank: 70 l Maximum pressure: 50 bar Pump performance: 5 l/min Turbine power: 1800 W Pump power: 370 W Voltage: 230 V Weight: 100 kg Bjdpewz Nmpofx Abtedg

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER MACHINE EQUIPPED WITH AN ADDITIONAL 5L WATER TANK Manufactured in 2019 The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Weight (kg): 33 Cable length (m): 12 Bdodpfx Abjztcfasteg INCLUDED: 5L WATER TANK NEW 430mm PPL 0.5 disc brush 5L TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC850™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 85 cm and a 250-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC850™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC850™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 85 cm - Heated tank with a capacity of 250 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator Bjdpfxeu Srrho Abtsdg - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 180 kg - External dimensions - Open chamber (W x D x H): 135 x 110 x 195 cm - External dimensions - Closed chamber (W x D x H): 135 x 110 x 140 cm - Rotating basket diameter: 85 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 250 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: new, Year of construction: 2026, Metalclean P80 spray cleaning system in stainless steel 1-tank spray cleaning system with a rotating basket. Usable dimensions = D = 780 mm, H = 430 mm Load capacity / batch = 100 kg Bdedoir Apvopfx Abtjg Tank volume = 130 liters Spray pressure = 3 bar Operating voltage = 3 x 400 V/N/PE 50 Hz Oil skimmer

Condition: excellent (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 800 mm, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020. Type: CMM CONTURA 9/18/8 Year of manufacture: 2020 Operating voltage: 100–240 V Frequency: 50–60 Hz We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one. The data, taken directly from Zeiss's service log (as of June 2025): - 10,284 operating hours - 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km) - Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it - Zero significant component replacements Bdodpfx Abszuzf Ieteg - Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it. Probe head: VAST XT Gold Software: Calypso CNC 7.2 + QS-Stat-out Included accessories: PC, monitors, sensor rack Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories. Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary) It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use. If you have any questions or need further information, please send us a message or call us.

Condition: used, ITEC Star Clean 23871 is a professional hygiene station designed to control personnel access to production areas in the food processing industry. The system provides automatic cleaning and disinfection of footwear, ensuring high hygiene standards before entering production zones. The unit uses rotating brushes to effectively clean and disinfect the soles and sides of footwear during passage. Automatic sensor activation ensures simple, safe, and hands-free operation. Constructed from high-grade stainless steel, the station offers durability and reliable performance in demanding industrial environments. It is ideal for food processing, meat, dairy, and pharmaceutical facilities where strict hygiene standards are required. Technical Specifications Manufacturer: ITEC Hygiene / Frontmatec Model: Star Clean 23871 Type: Footwear Cleaning and Disinfection Station Material: Stainless Steel (Inox) Power Supply: 400 V, 3N/PE, 50–60 Hz Power Consumption: 0.75–1.25 kW Water Connection: 3/4” Bodpozgqvasfx Abtedg Throughput: 5–7 persons per minute Activation: Automatic sensor operation Application: Food, meat, dairy, and pharmaceutical industries

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER Manufactured in 2019 The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Weight (kg): 33 Cable length (m): 12 INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE Bodpfxeztb Dne Abtodg KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER Manufactured in 2019 The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Weight (kg): 33 Cable length (m): 12 Bodpsztc D Nofx Abtodg INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: used, maximum load weight: 20,700 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 04/2005, next inspection (TÜV): 05/2027, total length: 11,290 mm, total width: 2,600 mm, total height: 3,950 mm, Year of construction: 2005, Additional information: * Type | First axle: Michelin R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 20% * Tire tread depth inner right | First axle: 20% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Michelin R * Tire size | Second axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner right | Second axle: 40% * Maximum axle load | Second axle: 9000 kg * Price on request: Yes * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lifting axle | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension Additional features: * Rear doors * Homepage * Tail lift Bsdpfx Abezxkycstodg * Lifting axle * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly ask you to inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors. The stated prices exclude BPM and are only valid for export.

Year of construction: 2002, condition: ready for operation (used), Basket diameter: 790mm, usable height: 500mm, loading height: 930mm, max. basket load: 300kg, liquid volume: 150l, pump capacity: 1.5kW, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1200mm, weight: approx. 220kg. Documentation available. On-site inspection is possible. Bsdpfx Ajwg E Aqobtsdg

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Bdsdpfx Ajw Ewl Ujbtsg Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: as good as new (ex-display), Year of construction: 2023, Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a 0-8 BAR wash pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure is adjustable from 0-8 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: 0-8 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Bdodpfxor Hm R Te Abtog - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: used, Year of construction: 2008, machine/vehicle number: AH005185, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, actuation type: pneumatic, overall weight: 5,500 kg, Equipment: CE marking, We are selling a very well-maintained STEFANI SOLUTION 8000 edge banding machine. Year of manufacture: 2008 Bdsdpszdlabsfx Abtog Machine length: 11,000 mm Edge band thickness: 0.5 - 16 mm Workpiece thickness: 10 - 60 mm Minimum workpiece width: 260 mm Maximum speed: 25 m/min (without using saws) Units: - Separating agent applicator - Pre-milling unit - Gluing unit - Saws - Trimming units - Buffing units - Brushes - Saw for creating grooves on the surface and along the edge. The machine is in operational condition. For additional information, please call.

Condition: used, Year of construction: 2018, Overview This complete can filling line was manufactured by COMAC and is designed for the filling of carbonated beer in aluminium cans. The line has a nominal output of 5,500 cans/hour for 44 cl cans and 6,000 cans/hour for 33 cl cans. The core machine is a COMAC ISO 14-2 filling and seaming monoblock with 14 electro-pneumatic isobaric filling valves and 2 seaming heads. The filling monoblock includes CO₂ flushing before filling, product tank pressure control, “no can – no fill” function, automatic height adjustment for different can sizes and CIP dummy cans suitable for acid and caustic cleaning up to 80°C. Bdsdpfszktw Uex Abtog The self-adhesive labeller handles a maximum label length of 210 mm and a maximum label height of 80 / 160 mm at up to 6,500 cans/hour. The dry rinsing system uses approx. 0.25 Nl of ionized air per can, with a treatment time of approx. 3 seconds. Technical data - Line type: Complete can filling line - Manufacturer: COMAC - Year of manufacture: 2018 - Product: Carbonated beer - Nominal output: 6,000 cans/hour (33 cl); 5,500 cans/hour (44 cl) - Filling temperature: 2–4°C - CO₂ content: max. 5.5 g/L - Container type: Two-piece cans with SOT - Can formats: 330 ml and 440 ml - Can diameter: 66 mm - Can end: 202 - Product pressure: 3–4 bar - Water pressure: 3–4 bar - Air pressure: 6 bar - CO₂ pressure: 6–8 bar - Electrical supply: 3x400 V + N + T, 50/60 Hz - Auxiliary voltage: 24 V Scope of Delivery - Can Depalletizer | COMAC | For pallet size 1,120 x 1,300 mm; incl. empty can buffer table and platform | 2018 - Dual Channel Can Rinser | COMAC | Ionized Air Rinser | HEPA filtration, ionized air cleaning, 2-channel design | 2018 - Self-Adhesive Labeller | COMAC | Wrap-around labelling for empty cans; 6-plate carousel | 2018 - Filling / Seaming Monoblock | COMAC | ISO 14-2 | 14 isobaric filling valves / 2 seaming heads | 2019 - Double Shower | COMAC | Washing device after level control | 2018 - Beer Pump | COMAC | Centrifugal beer pump with frequency converter and pressure control | 2018 - Level / Lid Inspection | FT System | HS600-ST+CL003-RX+CT001-SE+ZT | X-ray level control / inspection system | 2019 - Can Twister 1 | COMAC | 180° can inversion before coding | 2018 - Can Dryer | BRB Globus | MEGA ADE 611 CW | 2019 - Ink Jet Coder | COMAC | Continuous inkjet coder, up to 162.5 m/min | 2018 - Can Twister 2 | COMAC | Return cans to upright position | 2018 - Carton closing system | SOCO System | T-10 | 2012 - Can / Case Conveyor System | COMAC | Conveyor system according to layout | 2018 - Conveyor Canopy | COMAC | Stainless steel canopy above empty can conveyors | 2018 - Change Parts | COMAC | – | Format parts for 33 cl cans and 44 cl cans incl. spouts, twisters and labeller parts | 2018 - Technical Documentation | COMAC | Documentation in English, paper copy and CD-ROM | 2018 Condition Used line – built in 2018, currently still installed. The line can be viewed on request. Availability Immediately available. Location: United Kingdom.

Condition: ready for operation (used), Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible. Bdjdpeyv H E Eofx Abteg