Used Cleancraft Assm 650 for sale (3,137)

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: 7203065, +++Demo machine, year of manufacture 2017+++ +++different color+++ Minor contamination in the dirty water tank. Extremely maneuverable - can perform turning maneuvers on the spot. -Several small scrubbing brushes with increased downforce. -Battery-powered ride-on scrubber with automatic drive and scrubbing brushes. -The very compact size gives this model the necessary maneuverability to work in confined spaces, as obstacles can be easily bypassed. -Dashboard with controls. -Mechanical operation of brush, suction bar, and water flow via levers. -Tilting dirty water tank for easier cleaning. -Several small scrubbing brushes, with the suction bar located directly behind them, enable a short design and a very small turning radius. Lrodpsfzk Ezofx Aifjr -Scrubbing brushes with their own motor increase the downforce. -Automatic disengagement of the suction bar in the event of unintentional impacts protects against damage. #Scrubber #CleaningMachine #Cleancraft #CleaningEquipment #CleaningDevice #RideOnScrubber #RideOnMachine

Condition: ready for operation (used), functionality: fully functional, rotor length: 650 mm, rotational speed (max.): 160 rpm, rotor diameter: 500 mm, TECHNICAL DETAILS Hopper opening: 1,850 × 1,250 mm Hopper volume: approx. 3.0 m³ Ledpfx Aezr Hyloiferr Rotor diameter: 500 mm Rotor length: 650 mm Rotor speed: approx. 160 rpm Power: material-dependent MACHINE DETAILS Control system: PLC control Motor-gearbox power: 45 kW Control cabinet: Fully wired Cable length: 5 m EQUIPMENT Control cabinet including 5 m cable Automatic star-delta starter

Condition: used, More technical data on request Lrsdpfx Aol Iir Ieifer

Year of construction: 2021, condition: as good as new (ex-display), Drive: electric 24V Operating hours: 30 Lredpfxsxzfwns Aifsr Pneumatic tyres on rear axle: yes Side brushes: Yes / 2x Cleaning area: 6000 - 16000 m² Max area performance: 6700 m²/h Working width without side brushes: 800 mm Length: 1600 mm Width: 1080 mm Maximum incline: 10% Operating hours: 30 Charger: included

Condition: good (used), Baumann NUP-650 Paper Stack Lift This machine is in very good condition. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Lsdpfjzur D Iex Aiforr Automatic and manual lifting cycles, fast operation. Load capacity: 650 kg. Pallet/sheet dimensions: 785 x 1150 mm. Documentation included.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 650 mm Travel distance Y-axis: 550 mm Travel distance Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle interface: HSK-E 40 Spindle speed: 42,000 rpm Spindle running time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. EUR 40,000 Tool magazine Number of tool slots: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Machine type: CNC machining center Manufacturer: OPS INGERSOLL Model: SPEED HAWK 650 Year of construction: 2016 Electrical connection data Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT Lodpfjzquqcsx Aiferr Technical documentation Manual HSK-E 40 tool holders 3 pallets

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) Lsdpfxezadr Ns Aifjrr – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, tank capacity: 50 l, total height: 1,033 mm, total width: 735 mm, total length: 1,279 mm, water tank capacity: 50 l, battery voltage: 12 V, gradeability: 2 %, sweeping width: 700 mm, battery capacity: 210 Ah, empty load weight: 240 kg, SSM 700, Handheld Scrubber-Suction Machine Battery-powered model with two disc brushes, electric drive, and a working width of 700 mm. Trailing scrubber-suction machine with extensive functionality for complete control over cleaning operations. Maximum productivity of up to 3150 m²/h. Approximately 3.5 hours of battery runtime allows for uninterrupted operation. Two cleaning programs are pre-installed; one program can be customized according to requirements. Intuitive and simple control via a central rotary knob. All-purpose cleaning brush reduces cleaning agent consumption. ECOselect mode: Cleaning in sensitive areas is possible by reducing the noise level, lowering energy consumption, and increasing operating time by up to 20%, reducing water consumption and brush wear, and lowering maintenance costs for the motors. Combination of optimized positioning of the vacuum motor, sound insulation, and separation of the airflow for a very quiet machine, allowing for a further reduction of the noise level in ECOselect mode. Adjustable handle for comfortable and easy operation. Integrated, easily accessible battery charger. Lredpfozqultjx Aifer Electrical components are optimally protected. Easy access for cleaning and maintenance. Brush heads are interchangeable, meaning that only one machine with different brush heads is needed instead of multiple machines.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, We are selling a CNC turning machine, model SL2500SY/650. Year of manufacture: 2002 Control system: MSG 805 V Software: MAPPS Spindle motor: 22 / 18.5 kW Counter-spindle motor: 11 / 7.5 kW VDI turret Chip conveyor 2-stage clamping system Interface for a bar feeder Travel distances: X 305 mm Z 690 mm Y 120 mm Max. turning diameter: 490 mm Standard turning diameter: 260 mm Max. turning length: 650 mm Max. spindle speed: 4000 rpm Lrjdpfx Aiozv N Nqefer Spindle bore: 88 mm

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Lsdpezv Sy Eofx Aiferr Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, overall weight: 20,000 kg, power: 202.26 kW (275.00 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C7.1, Shafts with 7/7 discs, each with 5 knives Crushing bar with comb Robust hooklift frame Wheel axle with drawbar Permanent overbelt magnet Water spray system Lodpfezh Hgwox Aifjrr

Condition: not inspected (used), Year of construction: 1997, operating hours: 1,45,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Lredpszqabmsfx Aifer Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Ledpozqapdofx Aifjrr The machine has not been tested but was in working order until the end.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Lrjdpfxozqupxj Aifsr Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar Ledekn Rz Hspfx Aiferr length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Ledjzpgh Djpfx Aiferr Safety:Safety equipment according to EC directive EN 60204

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, cutting force: 650 t, - Machine in very good technical and optical condition, fully refurbished - CAT engine Lrodpfxoy Ncqwj Aifor - Cutting force: 650 tons - Semi-mobile - Filling bed: 7m

Condition: used, mileage: 1,07,492 km, power: 265 kW (360.30 HP), first registration: 03/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2028, color: silver, gearing type: mechanical, emission class: euro4, loading space volume: 7 m³, Year of construction: 2007, Equipment: ABS, air conditioning, l/min at 10 bar * High-pressure hose boom: DN32 * Cassette boom: DN25/32 Lrjdpfx Aijzpcxxofor * High-pressure hose reel: DN32 * Rotor connection: DN32 * Hose swivel * Hand spray gun SP200 * Overflow valve RV3 * Oil/air cooler * Winch * Hose coiler * MPA valve manifolds * Compressed air maintenance unit Inspection possible by prior appointment. Further information, photos and videos are available upon request. Subject to errors, changes and prior sale.

Year of construction: 2017, condition: ready for operation (used), A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10bar. 4) Hyfra Sigma 7-S cooling unit, year of manufacture: 2017, cooling capacity at 32°C: 6900W, max. operating pressure: 42bar, refrigerant quantity: 1.1kg, refrigerant: R410A, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Ledpjzhw Ryjfx Aifjrr

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Lrsdpfx Aoztxpueifor Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: good (used), Year of construction: 2011, Vertical machining center Machine type: Avia VMC 650 Control: Heidenhain iTNC 530 Year: 2011 SPECIFICATIONS Travel X-Axis: 650 mm Y-Axis: 540 mm Z-Axis: 620 mm Rapid motion: (X/Y/Z): 25 m/min. Ljdpfezi Dz Usx Aiferr Max. revolution: 10.000 rpm Tool: ISO 40 Tool capacity: 24 Table size: 800 x 540 mm Max. workpiece weight: 700 kg Equipment Chip conveyor Electronical handwheel Internal cooling: bar Caliper: Renishaw

Condition: ready for operation (used), Year of construction: 2004, clamping force: 6,500 kN, screw diameter: 80 mm, injection weight: 1,600 g, Hydraulic injection moulding machine manufactured in 2004. This DEMAG D 650 features a clamping force of 6500 kN and a screw diameter of 80 mm. It offers a shot weight of 1,600 g and includes a handling system by Wittmann. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 650 machine we have for sale. Contact us for further details. • Hydraulic Core Pulls: 4 • Hydraulic Cascade: 8 • Hot Runner Control Zones: 16 • Handling System: Wittmann W 843 Pro 0815 • Handling System Year of Manufacture: 2021 • Z-axis Travel: 3,000 mm • Y-axis Travel: 2,000 mm • X-axis Travel: 1,200 mm • C-axis: Servo, 180° • B-axis: Servo, 270° • Machine in very good overall condition Ledpfxszvxt Ej Aiferr • Annual maintenance has been carried out

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: - Kickback pawls Lrjdozr I Abspfx Aifer - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, Year of construction: 2021, The Smipack XP 650 ALX is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4] Key Features Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P). Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products. Film Handling: Single film reel design with optional printed film centering devices. Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6] Technical Specifications Max Output: Up to 25 packs per minute (ppm) Max Product Height: 380 mm Max Reel Size: 650 x Ø 400 mm Working Pressure: 6 Bar Machine Weight: Approx. 1,682 kg Ledszp A Uaopfx Aifsrr ed linking conveyor into a high-performance double-chamber tunnel for final heat shrinking. Standard Built-In Features Pneumatic Reel Locking: Uses a dedicated reel chuck with convenient built-in rollers to streamline heavy roll replacements. Safety & Control: Equipped with sliding protection doors featuring a deceleration device, manual reel sealers, and a metric-graduation centering system. Sensor Grid: Features a complete array of photocells monitoring product presence, infeed obstruction, film wrapping, and tunnel outlet accumulation. Are you interested in reading about the FLXMOD® control system details, or do you need a list of available optionals like the printed-film centering device? AI responses may include mistakes. Learn more Year of construction: 2019 & 2021 Max speed: 72000 Current size (ml): 3×2 Container material: Can, Glass, Pet Max. container: height 170 mm Packaging Type: Film Number of lanes: 8 Max reel size: Ø 500 mm Number of reels: 2 Automatic Changeover: No Compatible Spare Parts: 6 months Dimensions: 17500x1800x2400 mm Power: 182 kW Compressed Air: 6 bar

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 230 V, working width: 650 mm, temperature: 140 °C, VIVID Matrix DUO MD-650 Working width 650 mm Double-sided laminator Lrjdszia Azepfx Aifjr Adjustable speed Adjustable temperature