Used Comec Edge Grinder for sale (4,938)

Condition: excellent (used), OMAB/Comec curved part grinder Working width 200mm Sanding belt oscillation Pneumatic material clamping Main motor 5.5kw Feed motor 0.25kw Ljdpstvfmhefx Akfsrk Extraction stubs 2x100mm Dimensions of the machine 210x80x150cmH Weight 450kg

Condition: excellent (used), functionality: fully functional, Double-sided grinder Grützmacher GSP10 Working width: 200-1000 mm Working height: 230 mm Number of units: 2 Mechanical oscillation of sanding belts Pneumatic head approach Grinding motor power: 2×7.5 kW Oscillation motor power: 2×0.15 kW Sanding belt: 2500x250 mm Exhaust ports: 2x140 mm Lsdpfx Akexmgrqsfjrk

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe Lodpoyh H A Dsfx Akfork – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: ready for operation (used), functionality: fully functional, total length: 1,440 mm, total width: 710 mm, total height: 1,300 mm, type of input current: three-phase, SAMCO Unilev150 double-sided edge sander Specification: • condition - used • manufacturer - SAMCO • model - Unilev 150 • working height - 150 mm • sanding belt dimensions 150 x 2150 mm • two sanding belt speeds • tops measuring 22 x 144 cm • both tops adjustable at an angle in the range of 0-30 degrees • engine power - 3.5 / 4.5 HP • pneumatic belt tensioning and oscillation • adjustable veneer sanding shoe on one side and "back" 15x75 cm on the other • attachment, angle grinder • extraction nozzle - fi 140 mm • weight - approx. 450 kg • overall dimensions 144 x 71 x 130 cm (length x width x height ) Lodpfxsvmqype Akfsrk Additional information: • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • the possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Condition: excellent (used), Technical data: Abrasive belt width: 150 mm Ljdpfxowv Swas Akfork Abrasive belt length: 2650 mm Worktable dimensions: 16680x700 mm Additional roller for sanding irregular edges Oscillation Power supply: 400 V Motor power: 2.4 kW Overall dimensions: Length: 1680 mm Width: 700 mm Height: 1560 mm

Condition: excellent (used), Technical data: Grinding belt width: 150 mm Dimensions of fixed working table: 1000x400 mm Dimensions of tilting work table: 1000x350 mm Mechanical oscillation Extraction nozzle 2x120mm Power supply: 380 V Motor rotation: 1300 r/min Motor power: 3 kW Overall dimensions: Length: 1,850 mm Width: 1 400 mm Height: 1,350 mm Lrjdpfx Akou Rmadofjk

Condition: like new (used), - Manual table adjustment - Manual belt angle adjustment - Belt width: 15 cm - Table width: 45 cm - Table length: 92 cm - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW Ledpfovz Uwzjx Akfjrk - 400 V - Year: 2002

Condition: like new (used), - Belt width: 150 mm - Grinding possible on the platen or flat surface - Table angle adjustment - Capability to grind curved elements - Manual table height adjustment - Motor: 3.4 kW - 380 V Lodpfxjvz U Ugs Akfsrk - Year: 1992

Condition: excellent (used), Volpato LASM Edge Sander Mechanical oscillation Constant grinding speed 1.5k3 motor Grinding height approx. 100mm Belt length 2640mm Height 130mm Lodswcflqepfx Akferk Extraction nozzle fi 100mm

Condition: excellent (used), Volpato LS-1NR edge grinder with chamfers Working height 10-100mm Aggregate system: 1.5kw grinding unit 1.5kw upper chamfering unit Lodpfjwhx Hxex Akfork 1.5kw lower chamfering unit Mechanical grinding belt oscillation Chafer speed regulated by means of an inverter up to 9900r.p.m Feed speed regulated by means of a variator 5-30m/min Grinding unit at various angles 2450x80mm grinding belt length

Condition: excellent (used), Volpato LBK 150 edge grinder Ljdpovdpyvefx Akfjrk Grinding belt height 150mm Length of the grinding belt 2650mmm Oscillation of the grinding belt mechanical Raising/lowering the unit from the control panel Main motor 3kw Oscillation motor 0.37kw CE certificate Extraction nozzle 110mm

Condition: excellent (used), Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Lredpfxexd Rl Ns Akfek Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: excellent (used), functionality: fully functional, Edge, disc grinder 2-in-1 SAMCO DG-60 Lredpfx Akjvgnagsfjk Specifications: - manufacturer - SAMCO - model - DG-60 - working height - 150 mm - paper size - 150 x 1870 mm - worktop with dimensions of 35 x 64 cm - motor power - 2.2 kW - mechanical belt tensioning and oscillation - the machine does not need pneumatics - diameter of the abrasive plate - 600 mm - table top adjustable in angle +- 45 degrees - extraction stubs fi 120 mm - safety switches and CE markings - weight - approx. 400 kg - overall dimensions 110 x 120 x 130 cm ( l. x w. x h. ) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and shipping costs

Condition: like new (used), Sanding unit with shoe pneumatic oscillation feed speed adjustment via variator: 5–30 m/min maximum working height: 100 mm minimum working width: 10 mm machine width: 2000 mm machine height: 1900 mm power supply: 380 V Lodpfxsx Atnqj Akferk year of manufacture: 1999

Condition: excellent (used), Sanding belt width: 200 mm Variable belt speed control Dimensions of fixed worktable: 1000x400 mm Dimensions of tilting worktable: 1000x350 mm Mechanical oscillation Power supply: 380 V Ledoxnyz Uepfx Akfjrk Motor speed: 1450 rpm Motor power: 3 kW Weight: 550 kg Year: 2007

Condition: like new (used), Sanding belt height: 200 mm Mechanical oscillation of the sanding belt Raising/lowering of the sanding unit controlled from the control panel Main motor power: 2.5 kW Possibility of sanding using a platen or flat surface Adjustable table angle Capability to sand curved elements Lrjdpfowi N D Rsx Akfjk 380 V Year: 1998

Condition: ready for operation (used), Working table length 144 cm, working table width 71 cm, operating pressure 6 bar, working table tilting 30 degrees, sanding belt width 15 cm Ledpfowx H A Asx Akferk

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A050694, total length: 4,500 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 850 kg, height adjustment type: mechanical, input voltage: 400 V, extraction connection diameter: 160 mm, input frequency: 50 Hz, grinding width: 140 mm, Grinder for narrow surfaces with the possibility of milling edges and grinding them. At the beginning there are two sanding units with oscillation and 160 mm wide belts, i.e. pre-sanding followed by smoothing, then two units milling the edges from above and below, equipped with cutters for rounding edges r-6 mm and further two units sanding with narrow belts after milling at the end, also with oscillation, and the last seventh unit with a brush wheel for smoothing. The machine is suitable for sanding wooden parts of solid wood and MDF boards, such as countertops of various types, shelves , elements of stairs, doors, windows and other various types of furniture and wooden construction elements. Ready to work possibility to check and start on site. Equipped with several sanding tapes and some parts. Lodpfjuynnujx Akfsrk

Condition: good (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 640, total length: 2,500 mm, total width: 1,000 mm, total height: 1,800 mm, type of input current: three-phase, overall weight: 600 kg, height adjustment type: mechanical, input voltage: 380 V, grinding height: 100 mm, Milling and edge grinding machine with oscillating unit for narrow surface grinding Ledpfxevw Eh Ao Akferk

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 102 mm, total length: 1,300 mm, total width: 3,100 mm, total height: 2,600 mm, overall weight: 2,600 kg, workpiece height (max.): 102 mm, pass-through width: 1,500 mm, One machine for all tasks: removing slag, burrs, and oxide Reliable and clean slag removal with slag hammer brushes The EdgeRacer the Grinder effortlessly removes slag that forms on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted to almost touch the bottom side, allowing the steel pins to knock off the slag. Lrodewzybkjpfx Akfjk Powerful deburring and defined edge rounding EdgeRacer® the Grinder easily removes stubborn punching burrs and laser beads/splatter. The degree of edge rounding can be set by adjusting the brush feed. Deburring and edge rounding of thin sheet metal and 3D workpieces Deburr thin sheets or parts with cut-outs. The abrasive brushes can be lowered below the transport level so that the entire workpiece edge is processed. The oxide disc allows oxide layers to be removed from both internal and external contours. Maximum working width or double performance – optimally adapted to your needs Depending on the width of the parts to be processed, you can choose between two processing modes. Choose single-row processing to fully utilize the working width, either for wide panels or parallel loading. The brushes automatically change position to optimize tool wear. For narrower workpieces, select double-row processing to achieve double the throughput in just one pass.

Condition: excellent (used), functionality: fully functional, The MADO Grinder Model: MEW 620 is a heavy-duty, industrial meat wolf (grinder) designed for high-volume, reliable size reduction of meat, fish, and other food products. This model is engineered for continuous operation and easy maintenance. Performance & Throughput Capacity Output 1,400 kg/h High-Volume Grinding: As an industrial grinder, the MEW 620 is built for continuous, high-throughput processing, efficiently grinding large quantities of product. MADO Quality: MADO is a recognized brand in cutting and grinding technology, known for producing durable and reliable machines. Versatile Product Handling: Capable of processing various materials, including fresh, chilled, and sometimes tempered (partially frozen) meats, depending on the cutting set configuration. Operational Benefits Robust Construction: Constructed with stainless steel, ensuring longevity and resistance to corrosion. Hygienic Design: Designed with a focus on hygiene and easy cleaning, featuring accessible components and smooth surfaces for simple washdown. Safety: Includes visible safety features like an emergency stop button (visible in the image) for operator security. Industrial Application: Ideal for use ahead of stuffers in a full production line. Ledpfx Asxxtucjkfork

Condition: excellent (used), functionality: fully functional, Comec FMC 900 3M-I Drilling Machine Automatic loading from magazine Number of spindles: 4 Lsdpfx Aey A I R Aekfork Main motor power: 4 kW Max workpiece length: 900 mm Max workpiece width: 100 mm Maximum drilling distance: 800 mm Drilling capacity depending on material length: 500–1100 pieces/hour Suitable for large production series of chairs, beds, cribs, as well as components of other furniture

Condition: excellent (used), functionality: fully functional, Comec FXT Double-Sided Milling Machine Ledoyxm R Hepfx Akferk Number of milling units: 4 Unit arrangement: Right/Left/Top/Top Milling unit power: 4×0.85 kW Spindle speed: 12,000 rpm Feed speed: adjustable via variator

Condition: good (used), Prakma Edge Gluer Fully operational and ready for production. This is a valued brand among small laminators. Ideal for the production of covers, decorative packaging, etc. Made in Germany. Ledpfx Ajyur Afjkfjrk The machine uses cold glue. Copper rollers. Smooth adjustment: glue thickness and gap width. Set of separators. Easy cleaning without the need for tools. 230V power supply. Weight: 30kg. Roller width: 80mm.

Condition: used, Year of construction: 2006, Working width ca. 1.000 mm feed: pneumatisch Spindle diameter 40 mm Ledpfox Ivk Ujx Akfsrk