Used Cormak Mp140 Workshop Washer for sale (6,144)

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Washer The 140L parts washer is a professional workshop cleaning machine designed for the effective removal of oil, grease, deposits, and other stubborn contaminants from mechanical parts and components. The closed-loop cleaning solution system allows for efficient use of the cleaning fluid while reducing consumption. The large tank capacity, robust construction, and convenient working area make the 140L workshop parts washer an excellent choice for mechanical workshops, automotive service centers, manufacturing facilities, and maintenance departments. Key Advantages of the 140L Workshop Parts Washer 140-liter tank capacity – provides ample space for cleaning larger parts and components. Up to 90 liters of cleaning solution – the large working fluid capacity allows for longer operation without frequent refilling. Efficient 2.7–3.6 l/min pump – enables precise application of the cleaning solution to the components being cleaned. Closed-loop system – allows the cleaning solution to be reused and helps reduce consumption. Automatic lid lock – improves operator safety and convenience. Stable four-leg construction – provides excellent stability during operation. Practical work surface – provides a convenient place to put tools, parts, and accessories. Parts Cleaning Concentrate Included The MP140 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer Construction and Operating Principle The 140L parts washer is equipped with a flexible hose fitted with a spray nozzle. The cleaning solution is drawn from the tank and delivered through the pump to the hose, allowing the operator to precisely direct the stream onto contaminated surfaces. For proper operation, the pump inlet must be completely submerged in the cleaning solution. This ensures an adequate flow of cleaning fluid during operation. The tank lid opens conveniently and automatically locks in the raised position, improving operator safety. The entire unit is mounted on a robust steel frame with four legs, providing stability even during intensive use. With dimensions of 1,130 × 540 × 885 mm, the parts washer can be installed in most workshop environments while still providing a large and practical working area. Standard Equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Gbedpfoztwh Asx Apwor Steel frame with four legs Work surface beneath the tank Assembly and operating instructions 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Tank capacity 140 l Maximum cleaning solution capacity 90 l Pump flow rate 2.7–3.6 l/min Power supply 230 V Overall dimensions 1,130 × 540 × 885 mm Working tray dimensions 800 × 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Cleaning Cabinet Washer The 140L parts cleaning cabinet washer is a professional workshop device designed for effective removal of oils, greases, deposits, and stubborn contaminants from metal and mechanical components. Operating in a closed-loop system, the machine uses cleaning fluid efficiently and economically. Thanks to its large tank capacity and stable construction, it is an ideal solution for industrial plants, workshops, and service facilities. Main advantages of the 140L workshop parts washer Maximum cleaning fluid capacity: 90 liters – allows long, continuous operation without frequent refilling of cleaning agent. Pump flow rate of 2.7–3.6 l/min – ensures precise cleaning of hard-to-reach areas and surfaces with micro-cracks. Large 140-liter tank – enables cleaning of larger machine and equipment components. Closed-loop fluid circulation system – economical use of cleaning liquid, reduced waste, and a cleaner working environment. Automatically locking lid – ensures safe operation during cleaning processes. Stable four-leg construction – provides optimal working height and safe operating conditions. Practical working shelf under the tank – convenient space for drying parts or storing tools. Design and technology The parts washer is equipped with a flexible hose with a spray nozzle, through which the cleaning fluid is delivered under pressure from the bottom of the tank. To ensure optimal performance, the pump inlet must remain completely submerged. The tank lid opens smoothly and locks automatically, increasing operator safety. The robust frame and four supporting legs provide excellent stability, even during intensive use. The well-thought-out design and compact dimensions (1130 x 540 x 885 mm) allow the unit to fit into most workshop spaces while providing a large working area for cleaning bigger components. Precision and cleaning efficiency The high-performance pump, with a flow rate of up to 3.6 liters per minute, combined with the closed-loop system, enables continuous and efficient operation with minimal fluid consumption. The cleaning solution penetrates even microscopic gaps, allowing thorough removal of contaminants from metal, cast iron, steel, and aluminum parts. The machine is designed for use with water-based detergents – cleaning effectiveness depends on the type and quality of the cleaning agent used. Applications The 140L parts cleaning cabinet washer is designed for professional applications in: automotive workshops, repair and maintenance services, Gsdpfjrh Ey Rsx Apwebr mechanical workshops, manufacturing facilities. It is suitable for cleaning: machine parts, tools, engine components, hydraulic system elements, technical components requiring thorough cleaning before regeneration, repair, or assembly. Standard equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Working shelf underneath the tank Assembly and operating manual Technical specifications Parameter Value Tank capacity 140 L Maximum cleaning fluid volume 90 L Maximum pump capacity 2.7–3.6 l/min Power supply 230 V External dimensions 1130 x 540 x 885 mm Working tray dimensions 800 x 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Parts Washer The AURORA MP150 pressure parts washer is a compact workshop cleaning machine designed for cleaning mechanical parts, tools, and components. The enclosed working cabinet helps reduce liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other stubborn contaminants. The parts washer uses a closed-loop cleaning solution system, allowing the cleaning fluid to be reused during ongoing work. The dual-function pneumatic gun enables both cleaning with a mixture of cleaning solution and compressed air and subsequent blow-off and drying of cleaned components. AURORA MP150 Workshop Parts Washer – Key Advantages 5–8 bar operating pressure – effectively removes oil, grease, carbon deposits, and other contaminants, including from hard-to-reach areas. Dual-function pneumatic gun – enables cleaning with cleaning solution and compressed air, as well as blow-off cleaning using compressed air alone. Closed-loop cleaning solution system – helps reduce cleaning agent consumption during regular operation. Working cabinet lighting – provides better visibility of cleaned surfaces, openings, and hard-to-reach areas. Integrated work gloves – make it easier to handle components without opening the cabinet. Lid support cylinders – make opening and closing the working chamber easier. Cabinet ventilation – supports air circulation while the machine is operating. Compact benchtop design – the parts washer can be placed on a stable and sufficiently strong table or workbench. Parts Cleaning Concentrate Included The MP150 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer with Dual-Function Pneumatic Gun The AURORA MP150 is equipped with a pneumatic gun featuring two operating modes, allowing a single device to perform both thorough cleaning and blow-off drying of components. In cleaning mode, a mixture of cleaning solution and compressed air is discharged from the nozzle. The pressurized stream helps remove contaminants from openings, channels, recesses, and surfaces with complex shapes. After cleaning, the gun can be switched to blow-off mode. Compressed air removes residual cleaning solution from surfaces and hard-to-reach areas, making it easier to prepare components for further use, inspection, repair, or assembly. The AURORA MP150 Parts Washer Comes as Standard With Dual-function pneumatic gun Integrated work gloves Interior cabinet lighting Ventilation system Lid support cylinders Compressed air supply adjustment 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 150 l Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun Dual-function pneumatic Cabinet lighting Yes Godpfx Apeztwg Sowebr Ventilation Yes

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MP180 Pressure Parts Washer The CORMAK MP180 pressure parts washer is a professional industrial cleaning machine designed for the effective removal of heavy dirt from mechanical, metal, and industrial components. The combination of high pressure, heated cleaning solution, and a stainless steel construction ensures excellent cleaning performance, durability, and convenience in everyday operation. The closed-loop cleaning solution system allows for economical use of the cleaning agent, while the ability to heat the liquid to a temperature of up to 70°C increases the effectiveness of removing stubborn contaminants such as oils, grease, fats, carbon deposits, and other residues. The MP180 parts washer has been designed for professional workshops, service centers, and industrial facilities where precision, durability, and cleaning efficiency are essential. Key Advantages of the MP180 Parts Washer Closed-loop cleaning system with heated cleaning solution – effective removal of stubborn contaminants thanks to an operating temperature of up to 70°C. High operating pressure of up to 8 bar – enables thorough cleaning of hard-to-reach surfaces and heavily soiled components. Stainless steel construction – provides excellent resistance to corrosion, moisture, and intensive use. Dual-function cleaning gun – allows operation using compressed air alone or a mixture of air and cleaning solution, as well as drying components after washing. Adjustable leveling feet – ensure stable positioning of the machine even on uneven surfaces. Parts Cleaning Concentrate Included The MP180 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 MP180 Construction and Technology The MP180 parts washer is equipped with a spacious working chamber and a cleaning solution heating system. The elevated liquid temperature increases the effectiveness of the cleaning process and helps remove stubborn contaminants more quickly. Gbodpoztwa Sefx Apwsr The robust stainless steel construction provides excellent resistance to moisture, dirt, and demanding working conditions. This makes the machine suitable for regular use in workshops, service centers, and industrial facilities. Standard Equipment Dual-function gun – air / liquid + air Cleaning solution heating system 180-liter working chamber Stainless steel construction Adjustable leveling feet 2 liters of concentrate for workshop parts washers Technical Specifications Parts washer capacity 180 l Voltage 230 V Frequency 50 Hz Weight 56 kg Height with legs 1,450 mm Height without legs 920 mm Internal width 740 mm Internal height to open lid 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, MP180 Pressure Cabinet Washer is an industrial cleaning device designed for washing heavily contaminated mechanical, metal, and industrial components. Thanks to pressure cleaning technology and a stainless steel construction, the machine provides high durability, efficiency, and safe operation even under demanding working conditions. The closed-loop system and the ability to heat the cleaning fluid up to 70°C enable effective removal of grease, oils, carbon deposits, and other stubborn contaminants. Main advantages of the MP180 washer Closed-loop system with heated cleaning fluid – improved removal of difficult contaminants at temperatures up to 70°C. Pressure up to 8 bar – effective cleaning of hard-to-reach areas and heavily contaminated components. High-quality stainless steel construction – corrosion and mechanical damage resistance, ideal for long-term industrial use. Two-function gun – allows selection between compressed air only or cleaning fluid mixed with air, also enabling component drying. Adjustable leveling feet – precise machine positioning even on uneven surfaces. Construction and technology The MP180 cabinet washer has been designed for maximum functionality in industrial environments. The design of the washing chamber and the integrated fluid heating system allows maintaining a constant cleaning temperature, significantly increasing washing efficiency. The pressure gun with an adjustable operating mode enables both cleaning and drying with compressed air. All components that come into contact with liquids are made of materials resistant to aggressive cleaning agents and chemicals. Precision and work efficiency Thanks to high cleaning pressure and elevated operating temperature, the MP180 pressure washer enables thorough removal of even stubborn contaminants from components with complex geometries. The operator has full control over the cleaning process – from adjusting the intensity of the spray stream to drying the cleaned parts. The 180-liter working chamber allows comfortable cleaning of medium-sized components without the need to disassemble them into smaller parts. Applications The MP180 pressure cabinet washer is suitable for: Automotive workshops, Industrial plants, Machinery service centers, Manufacturing facilities. It is ideal for cleaning: Engine components, Gearboxes and transmission parts, Godpsuc Tpysfx Apwjbr Valves, Pump housings, Hydraulic system components, Other metal parts requiring intensive cleaning. Thanks to its corrosion resistance and high durability, the machine is suitable for long-term operation in chemically demanding environments. Standard equipment Two-function gun (air / cleaning fluid + air) Cleaning fluid heating system Built-in 180-liter tank Stainless steel working chamber Adjustable leveling feet Technical specifications – MP180 pressure cabinet washer Parameter Specification Washer capacity 180 L Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Cabinet Washer is a compact cleaning device designed for washing mechanical parts, tools, and workshop components. The enclosed cabinet limits liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other difficult contaminants. Cleaning is performed using a closed-loop circulating cleaning fluid system. The pneumatic gun allows the operator to apply a mixture of cleaning fluid and compressed air, and after the cleaning process it can also be used for blowing and drying the component. Main advantages of the AURORA MP150 washer Operating pressure of 5–8 bar – effective removal of oil, grease, carbon deposits, and dirt from hard-to-reach areas. Two-function pneumatic gun – enables cleaning with a mixture of fluid and air, as well as drying components using compressed air only. Closed-loop fluid circulation – reduces cleaning agent consumption during regular operation. Internal cabinet lighting – improves visibility of cleaned surfaces and difficult-to-access areas. Integrated protective gloves – allow convenient handling of components without opening the cabinet. Gas struts supporting the lid – make opening and closing the working chamber easier. Cabinet ventilation system – improves working conditions inside the machine. Compact design – allows installation on a suitable workbench or sturdy table. Cleaning and drying with one gun The AURORA MP150 cabinet washer is equipped with a pneumatic gun offering two operating modes. During cleaning, the nozzle delivers a mixture of compressed air and cleaning fluid, helping remove contaminants from holes, channels, recesses, and complex-shaped surfaces. After cleaning, the operator can switch the gun to compressed-air mode. This allows removal of remaining fluid residues and faster preparation of the component for further work, inspection, repair, or assembly. Enclosed and illuminated working cabinet The cleaning process takes place inside a closed chamber, which helps reduce splashing of the cleaning solution around the workstation. Integrated gloves allow free rotation and positioning of the cleaned component without opening the lid. The built-in cabinet lighting improves visibility of the workpiece, allowing the operator to accurately control the cleaning process on dirty surfaces, openings, and hard-to-reach areas. Closed-loop cleaning fluid system Cleaning is performed in a closed circulation system using fluid stored in the machine’s tank. The tank capacity is 8–14 liters. This solution allows repeated use of the cleaning agent and reduces fluid consumption during everyday workshop operations. The simple fluid replacement system makes draining and preparing the washer for further use easier. Standard equipment Two-function pneumatic cleaning gun Protective gloves integrated into the cabinet Internal cabinet lighting Ventilation system Gas struts supporting lid opening Compressed air supply adjustment system Technical specifications – AURORA MP150 pressure cabinet washer Parameter Specification Cabinet capacity 150 L Cleaning fluid tank capacity 8–14 L Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Gsdjvugwmjpfx Apwebr Weight 29 kg Gun type Pneumatic, two-function Cabinet lighting Yes Ventilation Yes

Year of construction: 2025, condition: new, A workshop cabin washer made of stainless steel AISI 304 and acid-resistant AISI 316, designed for professional use in a broad range of industries and automotive applications. It operates in a closed-loop system at temperatures up to 45°C. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, in combination with the optimal temperature and pressure from the spray gun nozzle, easily removes all types of dirt. Standard equipment includes a compressed air gun and a low-pressure overflow brush. The washer is equipped with a 90-liter tank, a pneumatically lifted washing chamber, and adjustable height for user convenience. STANDARD EQUIPMENT: - High-pressure nozzle up to 140 bar - Low-pressure brush with 5 L/min flow rate - Compressed air gun up to 8 bar - Heated 90-liter fluid tank - LED lighting - Air blower for viewing window - Pneumatic chamber opening mechanism - Sensors for liquid level and temperature - Dual liquid filtration system - Integrated oil separator (effectively separates oil contamination from the water in the washer tank) - Dual foot-operated switches - Adjustable height feet with a range of up to 100 mm - Entirely made of stainless steel - Safety rating: IP 54 - XPOWER Active Cleaner fluid, 5L (two types available) OPTIONAL ADD-ONS FOR THE MASTER CLEANER MC1000: - Spray arm - Rotating basket - Rotary nozzle - Manifold cleaning nozzle - Tank insulation Gbedpfsgvaazex Apwsr TECHNICAL SPECIFICATIONS: - External dimensions with open chamber (cm): 125 x 85 x 235 - External dimensions with closed chamber (cm): 125 x 85 x 170 - Chamber dimensions (cm): 100 x 64 x 74 - Power supply: 3 x 400 V - Pneumatic system pressure: 6 - 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Fluid operating temperature: up to 45°C - Air connection: pneumatic quick coupling DN 7.2 plug - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 DIFFERENT MACHINE VARIANTS AVAILABLE CONTACT US TO LEARN MORE ABOUT THE OTHER MODELS.

Condition: new, Year of construction: 2025, overall weight: 230 kg, water tank capacity: 110 l, Workshop Cabin Washer, constructed from stainless steel AISI 304 and acid-resistant steel AISI 316, designed for professional use in various industries and automotive applications. It is used to remove heavy dirt without damaging the surface of the cleaned element. Operates in a closed-loop system at temperatures up to 45°C. The working table width is 150 cm. The washer is equipped with a 110-liter tank that can be optionally thermally insulated to prevent the heated fluid from cooling too quickly. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, combined with the appropriate temperature and pressure from the spray gun nozzle, effortlessly removes all kinds of dirt. Standard equipment includes a high-pressure lance up to 140 bar, a compressed air gun, and a low-pressure overflow brush. The washer chamber is pneumatically lifted, with adjustable height, bright lighting, and air ventilation for the window to ensure user convenience. The design and construction of the Master Cleaner MC 1500 adhere to the highest quality standards, ISO 9001, and environmental protection standards, ISO 14001. It is ideal for removing dirt from steel, cast iron, and aluminum surfaces. The Master Cleaner MC1500 is equipped with a dedicated oil separator that effectively removes oil contaminants from the water in the washer’s tank. EQUIPMENT: - High-pressure nozzle: 140 bar - Low-pressure brush: up to 5 L/min - Compressed air gun: up to 8 bar - Air ventilation for the viewing window - LED lighting - Pneumatic chamber opening mechanism - Heated 110-liter tank - Dual liquid filtration system - Oil separator - Liquid level and temperature sensors - Adjustable height feet: up to 100 mm - Dual foot switch - XPOWER Active Cleaner (5L starter pack) OPTIONAL FEATURES: - Rotating basket - Spray arm - Rotary nozzle - Manifold cleaning nozzle - Thermal insulation for the tank TECHNICAL SPECIFICATIONS: - Weight: 230 kg - External dimensions - Open chamber (W x D x H): 175 x 85 x 235 cm - External dimensions - Closed chamber (W x D x H): 175 x 85 x 170 cm - Chamber dimensions (W x D x H): 150 x 64 x 65 cm - Heated fluid tank: 110 liters - Operating temperature: up to 45°C - Power supply: 3 x 400 V - Pneumatic power supply: 6 - 8 bar - Maximum power: 7.5 kW - Operating pump pressure: 140 bar - Dual liquid filtration system: Yes - High-pressure lance capacity: up to 15 L/min - Air connection: Pneumatic quick coupling DN7.2 plug - Manual washing with overflow brush: up to 5 L/min - Dual foot switch: Yes - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 Gjdpfx Ajri Rn Uepwsbr - Declaration of conformity: CE MULTIPLE MODELS AVAILABLE - CONTACT US TO LEARN MORE.

Condition: new, Year of construction: 2026, K82ISPC Container Transport Caster The K82ISPC container transport caster is a specialized component designed for moving containers, container structures, and other objects equipped with standard corner castings compatible with the Twistlock system. The caster is designed for quick attachment directly to the container corner casting, allowing the container to be prepared for movement without the need for complicated structural modifications. The K82ISPC features a 200 mm diameter swivel wheel, making it easier to change direction and maneuver heavy objects on a suitably prepared surface. The directional lock provides additional control over the caster's movement while transporting the container. Another important feature is the foot-operated wheel brake, which allows the caster to be quickly locked in place once the container has been positioned at the required location. The K82ISPC container caster is ideal for applications where containers need to be periodically moved around a facility, warehouse, production hall, storage yard, or technical area. Container Transport Casters – Mobility for Heavy Structures Moving containers and large industrial structures requires appropriately designed transport components. Container transport casters provide mobile support for containers and make it easier to move them over short and medium distances within a facility. Container casters are particularly useful in locations where containers need to be regularly repositioned, relocated, or arranged according to current production and logistical requirements. Thanks to the Twistlock mounting system, the caster can be attached directly to the designated corner casting of the container. This solution provides a convenient connection between the caster and the container and simplifies preparation of the entire assembly for transportation. Twistlock Mounting – Quick Connection to the Container One of the key features of the K82ISPC is its Twistlock mounting system. Twistlock is a widely used solution for securing and connecting containers. In the case of the transport caster, it allows the existing container mounting points to be used for installing the caster. As a result, a transport caster with Twistlock mounting can be securely connected to the container corner casting without the need to drill additional holes or make permanent modifications to the container structure. This solution simplifies both the installation and removal of the casters and allows the transport system to be used according to current requirements. Key Advantages of the K82ISPC Caster Load capacity of up to 3,000 kg Twistlock mounting system 200 mm diameter swivel wheel Directional wheel lock Foot-operated wheel brake Easy container maneuvering Gjdpfxjztyg Us Apwobr Precise positioning of heavy structures Suitable for internal transport, warehousing, and industrial applications K82ISPC Technical Specifications Specification Value Model K82ISPC Load capacity 3,000 kg Overall height 390 mm Height 300 mm Width 300 mm Wheel diameter 200 mm Wheel type Swivel with directional lock Mounting Twistlock

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer Gbjdpfxsztwkdj Apwer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: new, Year of construction: 2026, Heavy-Duty Lever Jack – 5000 kg Capacity The heavy-duty lever jack is a reliable tool designed for professionals who require strong and durable equipment for everyday use in demanding environments. With an impressive lifting capacity of up to 5,000 kg, this tool is ideal for a wide range of industries, including manufacturing, construction, logistics, and automotive services. It is an excellent solution for lifting and moving heavy machinery, steel structures, pallets, and other bulky objects. One of the key advantages of this jack is its well-designed construction, combining durability with functionality. The total length of 1,540 mm provides an optimal operating range, allowing the user to operate the tool precisely and safely, even in confined or challenging spaces. The ergonomic lever design and appropriately shaped handle ensure comfortable operation while minimizing the effort required to lift even the most demanding loads. Despite its high strength and durability, the jack is relatively lightweight, weighing approximately 10 kg, which makes it easy to transport and operate. This is a significant advantage, particularly in situations where mobility and quick response to changing operational requirements are essential. Thanks to the use of high-quality materials and precision manufacturing, the jack offers a long service life, excellent resistance to damage, and reliable performance even under intensive use. The device has been designed with safety and work efficiency in mind. The two-wheel base provides stability and easy maneuverability, which is particularly important when moving heavy loads over short distances. In addition, the robust construction of the jack minimizes the risk of failure, ensuring trouble-free operation over an extended period of time. Gbodpfovxrt Iox Apwor In summary, the 5,000 kg capacity lever jack, with a total length of 1,500 mm and a weight of approximately 10 kg, is an essential tool for any professional who needs reliable equipment for handling heavy loads. Its versatility, durability, and ease of use make it an excellent choice for businesses and individuals who refuse to compromise on quality and workplace safety. Technical Specifications Lifting capacity: 5,000 kg Overall length: 1,540 mm Tube diameter: 40 mm Nose plate thickness: 11 mm Nose plate width: 64 mm Weight: approx. 10 kg

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Gedpey I Nugjfx Apwobr Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Gjdjzlr N Sjpfx Apwjbr

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Gbedpfx Apoy H Aizjwor FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Gbjdpforh E Dqsx Apwjr THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 400 kg

Condition: new, Year of construction: 2026, MDC750 Metal Dust and Chip Extractor – 230V is a high-performance extraction unit designed for metalworking stations where effective removal of contaminants such as metal chips, filings, and dust is essential. Thanks to its compact design, durable motor, and high extraction efficiency, it is a reliable solution for professional metalworking workshops, production plants, and workstations equipped with belt, bench, and disc grinders. This metal extraction system provides a clean and safe working environment while maintaining stable extraction performance. Main advantages of the machine High extraction efficiency – airflow capacity up to 1800 m³/h without a bag, ensuring effective removal of even fine metal dust and filings. Compact design – a stable, well-balanced housing allows operation in limited workshop spaces. Quick access to the collection container – simplifies regular emptying and reduces downtime. Easy filter replacement – minimizes maintenance time. Suitable for various machines – an ideal metal chip extractor and grinder dust extraction system for small and medium-sized workshops. Design and technology The MDC750 has been designed for intensive operation in industrial environments. The construction is based on a durable steel housing and an efficient filtration system that effectively separates metal dust and chips. The suction unit is powered by a 0.75 kW motor, providing appropriate airflow parameters. The 350 mm diameter impeller generates stable suction pressure, allowing efficient removal of even heavier metal particles. The machine is equipped with a 1 × 100 mm suction port, making it compatible with the most common metalworking stations. The large collection container ensures long operating periods without frequent emptying. Precision and work efficiency The applied design solutions ensure constant performance during both metal chip extraction and fine dust removal. The extraction capacity of 1520 m³/h with a bag allows efficient operation of both single and multiple workstations. The compact dimensions make the unit easy to relocate and integrate into existing workshop layouts. Applications The MDC750 metal extractor is designed for professional applications, especially: bench, belt, and disc grinding stations, small and medium-sized metalworking workshops, metal component preparation and finishing stations, processes requiring effective removal of metal chips and dust. Standard equipment Basic filter Chip and metal filing collection container 100 mm suction port Set of mounting components and consumable elements Technical specifications Parameter Value Gsdpfx Ajztn Sfepwebr Motor power 0.75 kW Voltage 230V / 50 Hz Suction ports 1 × 100 mm Extraction capacity without bag 1800 m³/h Extraction capacity with bag 1520 m³/h Impeller diameter 350 mm Dimensions 870 × 560 × 1170 mm Weight 31 kg

Condition: new, Year of construction: 2026, MDC1500/400 Metal Chip Extractor The MDC1500/400 metal chip extractor is an industrial machine designed for intensive use at grinding and welding stations, as well as wherever effective removal of metal chips and dust is required. This model provides high extraction performance, stable airflow and filtration adapted to the demanding conditions typical of metal production and processing. Key Advantages Two-stage filtration – quick, tool-free replacement of the two filter cartridges improves chip separation efficiency. High extraction performance – up to 2,200 m³/h without a bag, ensuring stable operation even when handling large quantities of metal chips. Mobile design – the compact wheeled housing makes it easy to move the unit between workstations. Large collection container – extends operating time without the need for frequent emptying. Dual suction inlet, 2 × 100 mm – allows two machines to be connected simultaneously. Design and Technology The MDC1500/400 is equipped with a high-performance motor operating at S1 100%: 1.5 kW and S6 40%: 2.1 kW, ensuring stable extraction performance even during extended operation. The 400 V / 50 Hz power supply provides reliable operation and consistent impeller performance. The dual-inlet system, 2 × 100 mm, enables efficient extraction from two sources. The optimised suction system design allows an airflow rate of up to 2,200 m³/h without a bag. When operating with a bag or hose, the extraction capacity is 1,500 m³/h, which is still fully sufficient for workstations generating large quantities of metal dust and chips. Precision and Performance The MDC1500/400 metal chip extractor has been developed to maintain a stable, linear airflow. Its robust housing minimises vibrations, while the precisely designed filtration system ensures optimal capture of dust generated during grinding, deburring and welding. As a result, the unit effectively helps keep the workstation clean and improves the working conditions for the operator. Applications The MDC1500/400 is a versatile, professional extraction unit for grinders and machining workstations operating in continuous-duty conditions. It is ideally suited for: grinding tables, welding tables, bench, belt and disc grinders, manual and mechanical processing workstations where metal chips and swarf are generated. Standard Equipment two filter cartridges, large container for metal chips and swarf, compact and mobile housing, dual suction inlet, 2 × 100 mm. Technical Data Parameter Specification Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400 V / 50 Hz Gsdpfxsvuq Ams Apwsbr Suction inlets 2 × 100 mm Extraction capacity without bag 2,200 m³/h Extraction capacity with bag/hose 1,500 m³/h Dimensions 850 × 670 × 765 mm Weight 72 kg

Year of construction: 2026, condition: new, CORMAK Refrigerated Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Using efficient refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for use in standard industrial compressed air installations. High efficiency — capacity of up to 7000 l/min makes the dryer an effective solution for medium and large compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 1.37 kW. Automatic condensate drain valve — ensures reliable condensate removal without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and long-term durability. Its main structural components include: 1. Air-to-air heat exchanger During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and extends the service life of system components. Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 7000 l/min Gbedpsmt Dcxefx Apwsr Power consumption 1.37 kW Supply voltage 230 V Dimensions (L × W × H) 1000 × 550 × 920 mm Weight 95 kg Refrigerant type and quantity R410a, 900 g

Condition: new, Year of construction: 2026, CORMAK PT265 230V Planer Thicknesser – Advanced Compact Woodworking Machine The CORMAK PT265 230V planer thicknesser in its new version is a technologically advanced woodworking machine designed for users who require precision, efficiency, and a compact design with single-phase power supply. This multifunctional machine combines the functions of a surface planer and thickness planer, offering improved machining accuracy thanks to an innovative synchronized table system. It is a professional solution for craft workshops, carpentry shops, and demanding hobby users working with both hardwood and softwood. Main advantages of the machine New integrated working table system – simultaneous adjustment of the infeed and outfeed tables eliminates the need for separate calibration and improves machining accuracy. Stable and heavy-duty construction – a 170 kg machine weight and wide cast iron working tables reduce vibrations and increase operator safety. Powerful 2.6 kW (S6) motor – additional power reserve enables efficient processing of demanding and hard wood species. Quick function conversion – easy switching from surface planer mode to thickness planer mode thanks to a simple table lifting and dust extraction cover system. 230V power supply – allows operation in workshops without access to a three-phase electrical installation. Construction and technology The CORMAK PT265 planer thicknesser is equipped with a modernized working table system operating synchronously and maintaining the set working plane. This eliminates common problems found in older machine designs, such as level differences between tables that may cause machining inaccuracies. The three-knife cutter block with a 75 mm diameter, rotating at 4000 rpm, ensures excellent surface quality and precise material processing. The 700 × 150 mm aluminium fence with angle scale allows accurate adjustment from 90° to 45°, increasing the versatility of the machine for various woodworking applications. Precision and working efficiency Thanks to precise height adjustment with a clear graduated scale and the centrally mounted thicknessing table on a rigid column, the CORMAK PT265 wood planer thicknesser provides stable and repeatable operation. The machine offers a maximum cutting depth of 3 mm and a feed speed of 6 m/min, allowing fast and efficient processing. Standard equipment Ø75 mm cutter block with three knives Modern synchronized cast iron working tables, precision-ground Aluminium guide fence 700 × 150 mm with angle scale Ø100 mm dust extraction outlet for chip extraction connection Quick conversion system between surface planer and thickness planer functions Operating manual (DTR) Gsdpfx Apjwu T S Aswobr CE Declaration of Conformity Technical specifications Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Fence tilt angle 90°–45° Number of knives 3 Cutter block length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum planing width 265 mm Maximum thicknessing width 265 mm Maximum thicknessing height 180 mm Maximum thicknessing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Motor power S6: 2.6 kW Power supply 230 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, Professional 8-Ton Log Splitter – Robust Construction and Long Service Life The professional 8-ton log splitter is designed for efficient wood splitting with maximum reliability and durability. Its solid construction and high-quality splitting wedge ensure long service life and trouble-free operation. The machine is intended for splitting logs with a diameter of up to approximately 450 mm. Its stable and robust design provides excellent performance and consistent results. The splitter is equipped with a hydraulic cylinder featuring an automatic piston return function, ensuring smooth and efficient operation. Device description Side support tables included – make feeding and positioning logs easier. Powerful and reliable 230 V electric motor – rated power of 3.0 kW, with temporary power increase up to 3.5 kW during heavy-duty operation. Safe operation compliant with EU standards – equipped with a two-hand control system for increased operator protection. Hydraulic system filled with 4 litres of oil – the machine is ready for immediate operation after purchase. Angled splitting wedge – improves wedge penetration into the wood. 4-way splitting wedge included as standard – allows splitting logs into four pieces in a single operation. Adjustable stop rod – allows the return height of the wedge to be set according to user requirements. Hydraulic oil level indicator – enables easy monitoring of the oil level. Transport wheels – provide convenient movement of the machine. Operating manual included. Comfortable transport handle – simplifies handling and relocation. Recommended hydraulic oil viscosity: HL32. Gbedpfxsridpao Apwsr The original, reliable hydraulic pump ensures long-lasting and maintenance-free operation. Reliable hydraulic pump! Technical specifications Parameter Value Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge feed speed 0.029–0.04 m/s Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Hydraulic oil tank capacity 4 l Overall dimensions 1070 × 800 × 1500 mm Weight 120 kg

Condition: new, Year of construction: 2026, Professional 8-Ton Log Splitter – Robust Construction and Reliable Performance The professional 8-ton log splitter is designed for efficient and safe wood splitting. Its solid construction and high-quality splitting wedge ensure long service life and reliable operation. The machine is designed for splitting logs with a diameter of up to approximately 450 mm. Its stable and durable construction guarantees excellent working results even under demanding conditions. The log splitter is equipped with a hydraulic cylinder featuring an automatic piston return function, ensuring smooth and efficient operation. Gedswymwcepfx Apwebr Device features Side support tables included – make loading and positioning logs easier. Reliable and powerful 230 V electric motor – 3.0 kW power, with the ability to temporarily increase output up to 3.5 kW during heavy loads. Safe operation compliant with EU standards – equipped with a two-hand control system for maximum operator safety. Pre-filled hydraulic oil system (4 litres) – ready for immediate use after purchase. Angled splitting wedge – improves penetration into the material and reduces splitting resistance. 4-way splitting wedge included – allows logs to be split into four pieces. Adjustable stop rod – enables setting the wedge return height according to the user's needs. Hydraulic oil level indicator – allows quick monitoring of the oil level. Transport wheels – provide convenient mobility. Operating manual included. Comfortable transport handle – makes moving the machine easier. Recommended hydraulic oil viscosity: HL32. The original, reliable hydraulic pump ensures long-lasting and trouble-free operation. Reliable hydraulic pump! Technical specifications Parameter Value Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge travel speed 0.029–0.04 m/s Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Hydraulic oil tank capacity 4 l Overall dimensions 1070 × 800 × 1500 mm Weight 120 kg

Condition: new, Year of construction: 2026, Machine vice QH160 160x125 mm – precise and reliable clamping for high-force machining applications Machine vices from the QH series are robust and reliable solutions designed for professional metalworking applications. The QH160 model, with a 160 mm jaw width and 125 mm maximum opening, is ideal for operations requiring secure and precise workpiece fixation. Thanks to its high-quality cast iron construction and a 360° swivel base with graduated scale, the vice provides versatility, repeatability, and high efficiency in everyday industrial use. Main advantages of the QH160 machine vice 360° swivel base with 1° graduation – enables precise positioning of the workpiece at the required angle. High-quality cast iron construction – the body and movable jaw provide excellent rigidity and resistance to deformation. Lead screw protected against chips and contaminants – ensures long service life and reliable operation. Gbodpfx Aevxgm Aopwjr High clamping force up to 3000 kg – allows secure fixation of larger and heavier workpieces. Removable swivel base – enables the vice to be used as a fixed version when maximum rigidity is required. Construction and technology The QH160 machine vice has been designed for intensive operation in demanding industrial environments. The cast iron body provides exceptional stability, while precisely machined surfaces guarantee accurate workpiece positioning. Replaceable jaw inserts require precise machining after installation to maintain tolerances in accordance with technical specifications. Precision and work efficiency The combination of a rigid construction, wide jaw opening, and high clamping force allows efficient and accurate machining of various materials. The integrated angular scale enables the operator to position the vice precisely within a 360° range, significantly reducing setup time and improving overall productivity. Applications The QH160 machine vice is suitable for use in: machining plants, tool rooms, metalworking workshops, workstations equipped with drill presses, milling machines, and grinders. It is suitable for both single-piece production and serial manufacturing wherever precise and stable workpiece clamping is required. Standard equipment Swivel base with 360° graduated scale Mounting holes Jaw inserts

Condition: new, Year of construction: 2026, CORMAK RBM 40HV Tube and Profile Bending Machine The CORMAK RBM 40HV tube and profile bending machine is a precise three-roll, roll-type bending machine designed for bending steel tubes, rectangular profiles, and solid materials. It enables operation in two working positions – vertical and horizontal – allowing flexible adaptation to different production conditions. Equipped with hardened rollers and a graduated upper roller pressure adjustment system, it ensures high repeatability of bending radii and excellent resistance to wear. Main advantages of the machine Roll-type (non-mandrel) bending system – enables bending of tubes and profiles without the risk of cross-section deformation. Vertical or horizontal operation – allows adaptation to the technological layout of the workstation. Mechanical upper roller pressure adjustment with vernier scale – precise setting of the bending radius. High machine weight (485 kg) – ensures excellent stability and vibration-free operation during bending. Ground and hardened guide rollers – increased durability and accurate material guidance. Foot pedal operation – comfortable and safe control for the operator. Left and right rotation – versatility when producing complex shapes. Design and technology The CORMAK RBM 40HV has been designed for intensive use in industrial environments. The machine body is made of thick-walled, rigid steel components, providing high resistance to twisting forces and bending loads. The bending rollers are manufactured from hardened and precisely ground steel with a diameter of 40 mm, increasing their resistance to wear. The pressure adjustment system with a vernier scale allows the operator to repeatedly set the same bending radius, which is particularly important in serial production. Godpfxou Snm Ie Apwebr Precision and work efficiency The CORMAK RBM 40HV tube and profile bending machine provides high bending accuracy for both individual components and series production. The gearbox with a motor power of up to 2.2 kW (S6) enables smooth bending of demanding materials, including steel tubes with a wall thickness of 2 mm. The possibility of operation in both rotation directions significantly simplifies the production of closed arcs and spiral-shaped structures. Applications The RBM 40HV model is a professional tool for the metalworking industry, designed for bending materials with various cross-sections. It is ideal for: production of railings, handrails, canopies, and structural components, companies specializing in steel tube and profile processing, metal workshops manufacturing small architectural elements, serial production of highly accurate bent components. Standard equipment Side guide rollers Foot pedal control system Set of working rollers Technical and Operating Documentation (DTR) in Polish CE Declaration of Conformity Technical specifications Parameter Value Material: round tube 50 × 2 mm Material: rectangular profile 50 × 50 × 2 mm Material: round solid bar 35 mm Material: rectangular solid section 35 × 35 mm Roller diameter 40 mm Motor power S1 1.5 kW / S6 2.2 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 900 × 850 × 1700 mm Weight 485 kg

Condition: new, Year of construction: 2026, CORMAK RBM 30HV Tube and Profile Bending Machine The CORMAK RBM 30HV tube and profile bending machine is a versatile three-roll, non-mandrel bending machine designed for professional bending of steel tubes, rectangular hollow sections, and solid bars. Its compact design, ability to operate in both vertical and horizontal positions, and precise upper roll adjustment make it an ideal solution for workshops, production facilities, and service companies where reliability, accuracy, and application flexibility are essential. Main Advantages of the Machine Non-mandrel bending system – enables bending without deformation of the cross-section, including applications requiring larger bending radii. Vertical and horizontal operation capability – provides flexibility in machine positioning depending on the workspace and production process. Precise upper roll adjustment with vernier scale – allows repeatable and controlled bending operations. Ground and hardened guide rolls – ensure accurate material guidance and long service life of working components. Hardened steel rolls – provide high wear resistance and maintain accuracy during long-term operation. Foot pedal control – enables convenient and ergonomic machine operation. Two-direction roll rotation – allows bending of complex shapes and closed arcs. Construction and Technology The CORMAK RBM 30HV is built on a rigid steel frame that provides resistance to deformation during bending operations. The 30 mm diameter rolls are made of hardened steel, ensuring durability even when working with demanding materials. The adjustable upper roll allows precise setting of the bending radius, while the 0.75 kW drive motor provides sufficient working force while maintaining compact machine dimensions. The machine can operate in both vertical and horizontal configurations, depending on the type of material being processed and available workspace. Precision and Work Efficiency Thanks to the three-roll bending system and precise pressure adjustment, the CORMAK RBM 30HV tube and profile bender provides high bending accuracy, even when processing thin-walled steel tubes and delicate closed profiles. The ability to rotate the rolls in both directions significantly simplifies the production of complex curves and spiral-shaped elements. The rotation speed of 9 rpm ensures an optimal working pace while maintaining full control over the bending process. Applications The CORMAK RBM 30HV is designed for light and medium-duty production and service applications. It is particularly suitable for: metalworking and fabrication workshops, light steel structure manufacturing, tube and profile fabrication in the furniture and fencing industries, production of decorative and functional shaped components. Standard Equipment Side guide rolls Foot pedal control system Technical documentation (DTR) in Polish CE Declaration of Conformity Technical Specifications Parameter Value Round tube capacity 30 × 1 mm Rectangular profile capacity 30 × 30 × 1 mm Round bar capacity 16 mm Solid rectangular bar capacity 30 × 10 mm Roll diameter 30 mm Roll speed 9 rpm Motor power 0.75 kW Gbjdpfx Aou Snlkopwer Power supply 3-phase, 400 V Dimensions (L × W × H) 1200 × 750 × 1210 mm Weight 252 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Gsdei D D A Sopfx Apwebr Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg