Used Dean Smith & Grace T25 X 72 for sale (62,555)

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hedpfx Ajrn Sqheahou Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Hodpfxjihf Two Aahju Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Hedpjihf Ufsfx Aaheu Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: excellent (used), Year of construction: 2022, Weinig Dimter ProfiPress L II Comfort 2500 x 1300 Wooden input length min./max. 800 - 2500 mm Timber widths min./max. 40 - 150 mm Unequal fin width in a panel Wood thicknesses min./max. 4 - 30 mm Plate end widths variable min. / max. 200 - 1300 mm Glue / adhesive type PVAc (Polyvinyl Acetate) Total pressing force max. 240 kN Press force per cylinder max. 24 kN - min. 4.4 kN Filling width of the press per cycle min. 1150 mm - max. 1350 mm Filling area of the press per cycle max. 3.25 m² Min. area occupancy per filling 50 % Max. recommended values are: Specific pressing pressure for softwood approx. 1.0 N/mm² specific pressing pressure for hardwood approx. 1.4 N/mm² Glue station GS 100 - 2,5 m Heizung Hochfrequenz mit Generator, luftgekühlt Generator 30 kW, luftgekühlt Outfeed conveyor 2500mm Full description on request. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). Hedpjz Dh S Rjfx Aahju (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Hsdpfxjzzd Rtj Aahsu Used machine – sold without warranty.

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Hedpox Rut Tsfx Aahju Out-Feed Cross Transfers.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features Hjdpfjxx Sawsx Aaheu - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade Hodpfxjvzmwao Aaheu -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 72, see photos -Weight: 26 kg

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. Hodpfetyy Sfjx Aahju As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, control type: NC control, bar length: 3,000 mm, bar diameter (min.): 25 mm, bar diameter (max.): 72 mm, IEMCA Maxis 72 Hedoykk Dmepfx Aaheu

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V Hodpfx Asw Rn Euoahsu ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Year of construction: 2008, condition: ready for operation (used), A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible. Hjdpfx Aaszf Nb Eeheu

Year of construction: 2006, condition: new, I sell 12 sets of new saw blades suitable for HOLZMA panel beam saw machines. Main saw blade FABA 600 x 5,8 / 4,0 x 60 Z 72 Scoring saw blade AKE 26 200 45H 200 x 4,8 - 5,8 x 45 Z=36 Hodpfog Dvutox Aaheu Price totally 1000 Euro. Available immediately.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT Hedpoxx R S Ejfx Aahju # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Year of construction: 2018, condition: excellent (used), Fully automatic production line for chocolate bars, made of stainless steel Manufacturer: GUSU Food Processing Machinery Year of construction: 2018 Condition: very good, little used The line consists of the following units: Chocolate bar production line, TPX-400, 400 V 3P 50 Hz, 40 kW 180° turning conveyor belt, TPX-400, 400 V 3P 50 Hz, 1.5 kW Elevator, TPX-400, 400 V 3P 50 Hz, 1.1 kW Straight roller, TPX-400, 400 V 3P 50 Hz, 0.75 kW Longitudinal cutter and distributor, TPX-400, 400 V 3P 50 Hz, 1.27 kW Single group roller, TPX-400, 400 V 3P 50 Hz, 1 kW Transverse cutter, TPX-400, 400 V 3P 50 Hz, 2.5 kW Chocolate storage tank, BWG500, 400 V 3P 50 Hz, 6 kW Chocolate conche, JMJ500, 400 V 3P 50 Hz, 9 kW Chocolate enrobing machine, TY J600, 400 V 3P 50 Hz, 21.38 kW Cooling tunnel evaporator I, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator II, TY J600, 400 V 3P 50 Hz, 0.75 kW Hsdpfx Aaezx Uz Dohou Cooling tunnel evaporator III, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator IV, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator V, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator VI, TY J600, 400 V 3P 50 Hz, 0.75 kW Automatic packaging machine, SFC 2, 400 V 3P 50 Hz The production line is 35 meters long. If you have any questions, please do not hesitate to contact us!

Year of construction: 2009, condition: used, No. 3281 CNC profile machining center Schüco PBX AL 7200 Used, year of construction 2009 According to our customer / the previous owner, the machine is fully functional and can be viewed on site 4-axis CNC machining centre for machining aluminium and steel profiles Max. profile machining length 7200 mm X-axis travel 7530 mm Y-axis travel 1180 mm Z-axis travel 660 mm A-axis rotation angle 90° Machining on three sides of the profile Feed speed max. 60 m/min Spindle speed max. 18000 rpm Tool holder SK 30 8-position tool magazine 8 pneumatic clamping units with automatic positioning Hsdpfx Ajz Evb Asahju CNC control Schüco with CAM and SchüCal PC operator station with monitor and keyboard Weight approx. 3450 kg Sale on behalf of customer, ex location near 080 01 Presov (Slovakia), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Hedpozud Ekefx Aahju

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Hjdpfx Aswwiybeahou

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Hedjzrgfhopfx Aahju Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: used, functionality: fully functional, Year of construction: 2017, control type: NC control, Motorized Guillotine Shear Manufacturer: Knuth Model: KMT 2500 x 4.0 mm Year of manufacture: 2017 Technical Data Brand: Knuth Model: KMT Year: 2017 Working length: 2550 mm Sheet thickness: 4.0 mm (450N/mm²) Cutting angle: 1.5° Strokes/min: 42 Motor power: 7.5 kW Weight: 3.2 t Dimensions: L 3.10 x W 1.70 x H 1.30 m Equipment • Support arms • Motorized backgauge 600 mm • Pneumatic sheet supports • NC control Hodpfx Aew Nagheahou • Cutting line illumination • Foot switch All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Hjdpfx Aaexc In Sohou Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: used, Year of construction: 2014, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Colour: White Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Safety mat, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 Hedpfx Asx E Uk Ueaheu - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5000 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Hedpjv Dxw Refx Aahsu Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm Hodpfx Aevzmtnoaheu -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm Hjdevzmwyopfx Aahou -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photos -Weight: 26 kg