Used Dsi Vertical Plate Freezer, Ds-V3 32/100 B for sale (71,605)

Condition: used, each with 32 stations with divider plate suitable for 64 blocks : - dimensions 1 full block per station -> ± 1070 mm x 530 mm Dcodpfx Apezxrkvotsl - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.710 x 1.600 x 1.120 mm 32 blocks weighing ± 26 kg or 64 blocks weighing ± 13 kg ± 1.664 kg / Cycle (2h30)

Condition: used, each with 24 stations with divider plate suitable for 48 blocks : Dcjdpfozxrmdex Aptjl - dimensions 1 full block per station -> ± 1.056 mm x 530 mm - dimensions 2 blocks per station -> ± 528 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 3.319 x 1.600 x 1.120 mm 24 blocks weighing ± 26 kg or 48 blocks weighing ± 13 kg ± 1.248 kg / Cycle (2h30)

Condition: used, each with 38 stations with divider plate suitable for 76 blocks : - dimensions 1 full block per station -> ± 1.070 mm x 530 mm Dcsdszxrlaepfx Aptjl - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 75 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.548 x 1.600 x 1.120 mm 38 blocks weighing ± 20 kg or 76 blocks weighing ± 10 kg ± 1482 kg / Cycle (2h30)

Condition: used, each with 26 stations with divider plate suitable for 52 blocks : - dimensions 1 full block per station -> 1.070 mm x 530 mm - dimensions 2 blocks per station -> 528 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.000 x 1.700 x 1.300 mm Dcedpfx Apjzx Ug Tjtjl 26 blocks weighing ± 26 kg or 52 blocks weighing ± 13 kg ± 1.380 kg / Cycle (2h30)

Condition: used, each with 26 stations with divider plate suitable for 52 blocks : - dimensions 1 full block per station -> 1.070 mm x 530 mm - dimensions 2 blocks per station -> 528 mm x 530 mm Djdpfx Aszx Ucuoptjcl max. thickness blocks 75 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 3.301 x 1.800 x 1.035 mm 26 blocks weighing 20 kg or 52 blocks weighing 10 kg ± 1.014 kg / Cycle (2h30)

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Dcsdpfx Aeyh Hc Rjptol

Condition: used, Used DSI V-5 32/100 vertical plate freezer on Freon/NH3 with 32 stations. Inner dimensions 1 station: 810x100x580 mm (LxWxH). Total block dimensions with a volume of 239 liter: 4100x840x580 mm (LxWxH).It is possible to freeze 507,7 kg of fish fillet each hour with a thickness of 100 mm. Dcjdperlk H Rsfx Aptel

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Dcodpfxozizlqj Aptjl Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,100 mm, sheet thickness (max.): 100 mm, The 32 RB series offers the solution for manufacturers delivering premium-quality products. This top quality is achieved by a multi-rotating brush unit with four abrasive lamella brushes, which evenly deburr and perfectly round the edges of the metal. Multi-directional rotary brush deburring machine (RB) for consistent deburring and finishing of flat sheet metal parts. All-around processing in a single pass, providing the part's surface with a non-directional finish. Equipped with one (or more) abrasive belt units (W) for pre-deburring and final finishing. - Abrasive belt unit - Rotary brush unit (self-calibrating) Dcedpfexw Ikcjx Aptjl - Abrasive belt unit

Condition: used, Year of construction: 2017, gebraucht 2017 3901 China 8490 € 1 Dsdpfx Apswiqlpotscl 6790 € 32 mm MK 4 300 - 1.000 mm 32 - 2.500 (16) U/min 1760 mm 800 mm 2080 mm 1600 kg 530 - 1.000 mm 2.2 kW 240 mm 250 mm 0,75 kW 0,10 - 1,25 (8) mm/U box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2019, turning diameter over bed 32 mm spindle passage 32 mm control SIEMENS 840-D-SL spindle stroke 220 mm main spindle speeds: 6000 U/min spindle drive 5,5 / 3,7 kW Sub - spindle - bar diameter 32 mm turning speed range sub spindle 8000 U/min turning length 220 mm collets 1536E motor power 5,5 / 3,5 kW total power requirement 16 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 6,40 x 1,60 x 2,10 m MAIER Swiss lathe in very good condition with SIEMENS 840-D-SL 3-channel control system, equipped with: - 2 counter spindles - NC C-axis on main and both counter spindles - Additional 3rd channel in the form of a second counter spindle - Channel 1 with Y1 and 4 driven tool holders - Channel 2 - Back side machining, tool carrier with 4 driven and 4 fixed tool stations - Tool holders for 4 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, manufacturer FMB Turbo Ø 3-36 / 3200 C - Stack magazine for holding a complete bundle of bars - Chip conveyor - Electronic handwheel - KNOLL high-pressure system 50 bar with paper belt filter system - Fire protection system, manufacturer KRAFT & BAUER Dsdpfx Aoytx Skjptjcl - Table for removing long parts - Removal of long parts (flange + pipe) - ARTIS - Tool and process monitoring “Genior Modular fully automatic tool and process monitoring” The machine can be inspected under power!

Condition: used, Used Jackstone vertical plate freezer with 20 stations and a capacity of 45kW (for example freezing 365 kg fish fillet per hour). Including adjustable block dividers to make 40 stations. Inner dimensions 1 full block per station : 1060x520x100 mm (55 liter) Inner dimensions 2 blocks per station: 527x520x100 mm (27 liter) Capacity and example based on: 56,2 kg fish fillet per station 20x 55 liter freezing stations temperature from +10°C to -18°C duration of one cycle: 185min including defrost, loading and undloading times evaporation temperature: -34°C Dsdpfxorlk Ico Aptocl

Condition: used, Mechanical punching tool with a punching force of 1000 kN. Dsdpfx Apof Nwqajtscl Tool holder for stamps up to 90 mm can be mounted on request. A large assortment of stamps and matrices is part of the delivery scope.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock - Integrated CIP (Cleaning-In-Place) system with spray ball - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Documentation – Fully Available Dcodpfxeykkk Hs Aptol - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test - Welding plan - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts Dodpfx Apezk Nmrstocl - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory dryer WALTHER TROWAL G 100 B Year of construction: 1998 Bowl dimensions: Ø 1100 m x height 1100 mm Dcodpfxezv T N Ue Aptol Inside dimensions: width 200 mm x max height 300 mm Motor rotation: 1500 t/min. Motor power: 0,45 kW Max heating capacity: 3 kW In perfect working condition Weight: 250 kg

Condition: used, machine/vehicle number: 5240, Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension  ca. 300x60x100 cm dimensio between the first plate to the spindle ca. 170cm Dcedezx Aqtjpfx Aptjl

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Dcsdpfx Aezm Hr Reptjl Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Year of manufacture: 2000 Technical data Manufacturer: STÖLTING Type: VB 322 Year of manufacture: 2000 Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Equipment • CNC control • Conical bending device • Operating manual All information without guarantee. Dcjdpezgf Rxofx Aptel A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1983, Used machine Dsdpjzyy Edsfx Aptscl Year of manufacture: 1983 Equipment and technical data:

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Dedpezwddxjfx Aptecl Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-2180-PPV-A-B-KF-SH LINEAR ACTUATOR Pressure: 2…8 bar. Dcjdpfx Apjtwqtbetel Good working condition. Please check out our other listings as well.

Condition: new, Technical description:Cutting height: vertical: 0 - 2,150 mm, horizontal: 80 - 2,050 mmCutting length: 5,300 mmCutting depth: 80 mm (with clamps: 55 mm)Saw blade: diameter 303 mm, bore 30 mm, Z = 60 hollow roof toothRotation of the saw blade: 5,000 or: 4 kW (S 6)Required air pressure: 6 barMeasurement readout for horizontal saw cuts:- using a scale from 0 - 2,070 mm- using a strip cutting stop from 75 - 500 mmMeasurement readout for vertical saw cuts:- on a scale from 0 - 1,300 mmExtraction nozzle: 1 x 100 mm 1 x 120 mmEquipment features:- ADVANCE clamping system, consisting of: 2 pneumatic clamping pliers,the motorized on vertical axes on a recirculating ball screw from abovemove down. The tongs carry plates with a weight ofmax. 150 kg- Torsion-free, free-standing machine frame- Round rod guide, vertical and horizontal- Pneumatically evasive slatted frame- Finely adjustable folding stop with stop extension- Fine adjustment for horizontal saw cuts via handwheel- Strip cutting stop- Manual programming rail with 5 slot nuts- Pneumatic immersion of the saw unit- 25 material support rollers- 1 feed roller and 1 feed roller- Pneumatic workpiece clamping device between the support rollers- 3 central support elements, pneumatically folding out- Pneumatic saw head locking- Control panel with template holder- Switch unit on the saw unit: start button, stop button- Tool cabinet- Illumination scale for vertical saw cutsOrder number: ELCO0001 / S013Scope of delivery:Equipment package I, consisting of:- Digital display for the folding stop- Digital display for the saw unit with incremental function- pneumatically swiveling saw unit- Scoring system with controlled counter air nozzle, numerical displayfor setting the scoring or groove depth and activating lightOrder number: ELCO0191 / S085 Dcsdpfx Apsvwf Hletjl

Condition: ready for operation (used), Year of construction: 2015, operating hours: 1,455 h, number of axes: 4, number of slots in tool magazine: 14, table length: 3,250 mm, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4-axis Weeke PROFI BMG211/32/12/K was manufactured in 2015. It operates on a supply voltage of 400 V / 230 V and is designed for 3-phase power with a maximum operating full load current of 38 A. If you are looking to get high-quality CNC wood machining capabilities, consider the Weeke PROFI BMG211/32/12/K machine we have for sale. Contact us for further details. • X/Y-Axis Speed: 70 m/min • Z-Axis Speed: 20 m/min • Table Length X: 3250 mm • Usable Table Length Y: 1150 mm • Workpiece Clearance: 1250 mm • Optional Usable Table Length Y: 1400 mm • Optional Workpiece Clearance: 1600 mm • Table Thickness Z: 125 mm • Workpiece Clearance Height: 225 mm • Workpiece Supports: 6 • Vacuum Fields: 2 • Vacuum Generator Capacity: 70/84 m³/h at 50/60 Hz • Vacuum Cups: 12 × 114 × 160 × 100 mm • Additional Vacuum Cups: 2 × 125 × 75 × 100 mm • Pneumatic Side Stops: 2 • Pneumatic Longitudinal Stops: 6 • Manual Folding Stops: 4 • HPL Positioning Aids: 4 • Laser Vacuum Cup Positioning: Yes • Laser Type: Crosshair Projection • Main Usage: 1455 h • Secondary Usage: 743 h • Occupancy: 8586 h Spindle / Drilling / Tooling • Main Spindle: F1-HSK63-12 kW • Spindle Speed: 1250–24000 rpm • Spindle Power: Up to 10/12 kW • Spindle Interface: HSK63 • Spindle Cooling: Air-Cooled • Spindle Lubrication: Permanently Greased • C-Axis: 360° Interpolating Axis • Vertical Drilling Unit: V12 High Speed 7500 • Vertical Drilling Speed: 1500–7500 rpm • Vertical Drilling Power: 2.3 kW • Vertical Drilling Depth: Max. 38 mm • Vertical Drilling Depth with Special Drill: Max. 55 mm • Maximum Vertical Drill Diameter: 35 mm • Vertical Drill Holder: Ø10 mm • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Unit: H4X/2Y • Horizontal Drilling Spindles: 6 • Horizontal Spindle Arrangement: 4 in X / 2 in Y • Horizontal Drilling Speed: 1500–7500 rpm • Horizontal Drilling Depth: Max. 38 mm • Maximum Horizontal Drill Diameter: 20 mm • Grooving Saw Unit: N1 X-Y 90° • Grooving Saw Swivel Range: 90° • Grooving Saw Cutting Depth: 30 mm • Grooving Saw Diameter: 125 mm • Grooving Saw Blade Thickness: Max. 5 mm • Grooving Saw Speed: 1500–7500 rpm • Tool Magazine: W14 • Tool Magazine Capacity: 14 Tools • Tool Interface: HSK63 • Maximum Tool Weight: 6 kg • Maximum Tool Diameter with Full Magazine: 130 mm • Maximum Tool Diameter with Free Adjacent Positions: 260 mm • Tool Change Time: Approx. 12–18 s FLEX5+ / Control / Equipment Djdpfozuhdqsx Aptecl • HP FLEX5+ Aggregate: Sawing / Milling / Drilling • FLEX5+ Milling Swivel Range: 0–100° • FLEX5+ Drilling Swivel Range: 0–100° • FLEX5+ Sawing Swivel Range: 0–90° • FLEX5+ Maximum Milling Tool Diameter: 20 mm • FLEX5+ Maximum Drilling Tool Diameter: 10 mm • FLEX5+ Maximum Sawing Speed: 15000 rpm • FLEX5+ Tool Interface: WFC40-25 • Control System: HOMAG Group powerTouch • CNC Control: powerControl PC86 • Display: 21.5" Full HD Multitouch • Processor: Intel Core 2 Duo • Hard Drive: Min. 160 GB SATA • Ethernet: 10/100 Mbit RJ45 • Operating System: Windows 7 Professional • Software: woodWOP • Automatic Tool Changer Loading Aid: Yes • TeleserviceNet: Yes • Electrical Supply: 400 V • Frequency: 50/60 Hz • Ambient Temperature: +10°C to +40°C • CE Safety Equipment: Yes • Supply Voltage: 400 V / 230 V • Phase: 3 Phase • Frequency: 50 Hz • Maximum Operating Full Load Current: 38 A • Fuse Rating: 50 A • Control Voltage: 24 V • CE Marking

Condition: new, DEMAG hub motors / crane motors / travel motors / drive motors: Dcjdpjzw Hb Tefx Aptjl 1. Hub motor, type: MBV 132 C 12/2 - 1 unit (new). 2. Hub motor, type: MBV 100 A 12/2 - 1 unit (new). 3. Hub motor, type KBH: 100 B 8/2 - 2 units (used).