Used Edelhoff Darrw/2/80 for sale (85,245)

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm Isdpfxsdhzf Ij Agysih equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Isdpezv Ukgjfx Agyeih Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 315 mm, feed length Z-axis: 175 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 50 rpm, quill travel distance: 175 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 9 m/min, rapid traverse Z-axis: 4 m/min, total width: 2,480 mm, total length: 1,620 mm, table width: 1,230 mm, table length: 410 mm, position of the milling head: vertikal, type of input current: AC, rotational speed (max.): 9,000 rpm, rotational speed (min.): 50 rpm, overall weight: 3,200 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, space requirement width: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 2,450 mm, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Due to restructuring measures, we are selling our Iiodpfjzzd Hhjx Agyeh CNC milling machine – Fehlmann Picomax 80 CNC 2/3 - robust Swiss precision machine - year of manufacture 1995 - low operating hours - very good condition considering its age - Heidenhain 315B control system - 4 axes (X, Y, Z + A [rotary axis]) - axes can be moved in parallel - travel distances X700 x Y315 x Z170 (+W495) mm - table 1,320 x 410 mm - 4th axis (rotary axis) AT100 original Fehlmann with 140mm three-jaw chuck and collet chuck - manual control panel - spindle 50 – 9,000 rpm - complete steel sheet enclosure with safety glass - fully functional - complete operating and programming manual - spare parts and service available from Fehlmann - machine can be inspected while powered on Depending on the price, a wired measuring probe (Renishaw), an electric fine milling and grinding spindle from RAY (Switzerland) 10,000 - 40,000 rpm, and various tool holders can be included. This offer is subject to change. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made with the exclusion of any warranty. Pick-up only (EXW) - no shipping.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9012, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 630 mm, total width: 5,100 mm, total length: 2,000 mm, pressing force: 400 t, clearance between the columns: 3,000 mm, overall weight: 65,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 400 t, The machine is partially overhauled and completed. The control system is built according to customer specifications (Siemens control). Column spacing: 3000 mm Stroke adjustment: 20 - 80 mm Ram adjustment: 100 mm Distance table - ram: 630 mm Ram strokes per minute: 100 Delivery time approx. 3 - 4 months after design of the new control system based on the customer's specific requirements. Price on request. Iisdpfx Aox U Ur Regyjh

Condition: excellent (used), Year of construction: 2007, Stöckel FX 80/50 ST 2 Surface grinding machine Stöckel FX 80/50 with ST 2 control, year of manufacture 2007, in SUPER condition. CE-compliant!! The machine comes from the training workshop of a renowned German mechanical engineering company. Iedpoz Ipk Aefx Agyjih Technical data: Year of manufacture 2007 Technical data Clamping area (L x W in mm) 900 x 500 Grindable area (L x W in mm) 800 x 500 Magnetic chuck size max. mm 800 x 500 Grinding wheel dimensions max. mm 300 x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 1900 Power kW 7.5 Machine weight approx.: 4.0 t Accessories and equipment: About the machine: Offered is a surface grinding machine Stöckel FX 80/50 with ST 2 control. This universal surface grinding machine is in very good original condition. It comes from a company where it was only used for training purposes. It features a very easy-to-use control system. A grinding travel of 800 mm in the longitudinal axis and a transverse travel of 500 mm make it suitable for toolmaking, fixture construction, and small-series production. The extensive standard equipment and the easy handling of the machine characterize this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Stöckel has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Stöckel on-site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 8923, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 650 mm, total width: 3,100 mm, total length: 2,000 mm, pressing force: 320 t, clearance between the columns: 1,530 mm, overall weight: 38,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 320 t, The machine is fully overhauled and completed. The control system is built according to customer specifications (Siemens control). Column gap: 1530 mm Distance table – ram: 650 mm Ram adjustment: 100 mm Iedpfex U Tudjx Agysih Stroke adjustment: 20 – 160 mm Ram strokes per minute: 30 – 120 Delivery time approx. 3 – 4 months after configuration of the new control system based on customer-specific requirements. Price on request

Condition: ready for operation (used), Year of construction: 2006, Offered is a Fehlmann CNC universal milling machine. Travel X/Y/Z/W: 700mm/315mm/178mm/495mm, feed rate X/Y: 9m/min, feed rate Z/W: 4m/min, rapid traverse X/Y: 9m/min, rapid traverse Z: 4m/min, table dimensions X/Y: 1130mm/350mm, max. table load: 250kg, spindle taper: SK30, tool positions: 32, max. speed: 9200rpm, spindle power: 5kW, drilling capacity in steel: 30mm, reach: 370mm, distance table-spindle: 620mm, control: Heidenhain. Weight: approx. 3400kg. Inspection possible by appointment. Isdpfxszgwyro Agysih

Condition: good (used), Year of construction: 1992, functionality: fully functional, operating hours: 8,600 h, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, pressing force: 80 t, overall weight: 5,200 kg, Amada Promecam Press Brake 80-25 CNC Press Brake, 80 tons, 2500mm bending length. In perfect working order, easy to operate. Robust machine. Only 8600 operating hours. Can be inspected and tested before purchase. Iiodoz Rqxhjpfx Agysh German operating manual included.

Condition: good (used), Year of construction: 2001, functionality: fully functional, FMB MBZ 75 - 80, 5-axis FMB multi-machining center, Type MBZ - 2 / 72-80 / 5, Year of manufacture 2001, PC control with TFT color display, Iiodpfx Agezhuitsysh Travel range X/Y/Z 7000/1000/370 mm, Milling head with high-frequency spindle for aluminum, Spindle speed up to 18,000 rpm - 7.5 KW, Tool changer, 12-position, Tool holder HSK 40, 2-axis NC dovetail milling head, 8 pneumatic clamping elements, Swivel machining possible, Program generator, FMB programming software, Pneumatic material stop, Measuring / probing device.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Max. working width: 2500 mm Iisdpezyanlsfx Agysh Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Tools

Condition: ready for operation (used), Year of construction: 2001, A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible. Iodpfjzdumqjx Agyoih

Condition: ready for operation (used), functionality: fully functional, Facing and centering machine KUHN KAZ 80-2 Iodpfx Asz Aquusgysih -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering length / endless -Clamping unit with self-centering vice -Spindle drive 1.8 kW -Drill chuck -Chip tray -Connection cable -Forklift pocket for transport Dimensions: L x W x H 1.7 x 0.7 x 1.4 meters / Weight 600 kg Errors and omissions excepted.

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Iisdpfx Agjz Hxlyeyjh Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Isdpfxez Hxpfj Agyjih Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Iisdpjzuabzefx Agysh Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Iedpfx Agjz Iql Ijysih Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2007, 3 x Frech die-casting machines DAW 80F RC, year of manufacture 2003, Ijdpfx Agoz Hkg Asyeih DAW 125 S DV, year of manufacture 1999, DAW 125 F, year of manufacture 2007.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Iiedpfxewqb Sco Agysh Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm Iijdpfx Ajzrpn Sogysh stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2009, operating hours: 61,894 h, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 2,340 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, nominal power (apparent): 25 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,250 mm, total length: 6,200 mm, total width: 3,700 mm, table width: 750 mm, table height: 930 mm, table length: 1,400 mm, rotary table diameter: 800 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 12,000 rpm, overall weight: 16,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 330 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We offer this used Hedelius RS 80-K-2300 5-axis machining center, manufactured in 2009. Key Data Manufacturer HEDELIUS GmbH Type RS 80-K-2300 Year of Manufacture 2009 Power Requirement / Voltage 29 kW / 400 V / 50 Hz (25 kVA) Total Weight 16000 kg Footprint Length 6.20 m Width 3.70 m Height 3.25 m Control System Program Input HEIDENHAIN Controller iTNC 530 NC Software Version 340490 04 SP4 PLC Software Version RS80_K V1.54 Development Level L4 Operating Hours Control System On 63333 Machine On 61894 Program Run Time 28295 Travel Ranges (Total Working Area) X-Axis 2340 Y-Axis 800 Z-Axis 600 Right Working Area (Fixed Machine Table Area) X-Axis 945 Y-Axis 800 Z-Axis 600 Left Working Area (Rotary/Swivel Table Area) (simultaneous machining possible) X-Axis 800 Y-Axis 800 Z-Axis 600 A-Axis +10° / -90° C-Axis 0 - 360° Clamping Surface - Fixed Machine Table Iedpfjz Hx Ihex Agyeih Length 1400 Width 750 Clamping Surface - Rotary/Swivel Table Length Ø 800 Width 630 Work Table T-Slots DIN 650 Slot Width 18 / 18 mm Slot Pitch 125 / 125 mm Number 5 / 5 Table Height Fixed Machine Table 930 mm Celox Motor Spindle Manufacturer Kessler Type DMS 100.XL-633.607 Speed Range 50 – 12000 rpm Tool Shank SK 40 Tool Magazine Magazine Capacity 30 tools Max. Tool Diameter Ø 80 mm (with available free slots) Ø 125 mm Max. Tool Length 330 mm Max. Individual Tool Weight 15 kg Total Magazine Weight 450 kg Special Accessories Scraper Conveyor AME GmbH Total Length ≈ 5700 Height ≈ 1760 Depth ≈ 830 Weight 515 kg Band Filter System (High-Pressure Coolant System) Model PS 120 Tank Capacity 780 l Flow Rate 120 l/min Filter Fleece 670 mm 100 m on a roll Length ≈ 2320 Height ≈ 1060 Depth ≈ 850 Weight 515 kg Motor Spindle - Cooling Unit Manufacturer Hyfra GmbH Type Chilly-25-S Machine No. 09010098 Year of Manufacture 2009 Weight 65 kg Control Cabinet - Cooling Unit Manufacturer Pfannenberg Type DTS 7101 SC Model No. 08390173726 Laser Light Barrier Manufacturer BLUM Type P87.0634 Laser System MINI – MICRO - NANO Wireless Measuring Probe Manufacturer HEXAGON Model m&h Radio-wave Touch Probe Type RWP20.50-M Extra KinematicsOpt HEDELIUS Transformation Kit If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Isdpfx Aoz Iqlbegyeih Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, operating hours: 45,000 h, pressing force: 80 t, stroke length: 30 mm, table width: 780 mm, table length: 880 mm, ram plate width: 650 mm, ram plate length: 800 mm, Equipment: CE marking, documentation/manual, Balconi press 80 tons strokes 100-400 adjustable stroke 30 mm die opening 350 mm machine weight 15,000 kg Iijdpfxjy Ulbvo Agysh includes soundproof cabin

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 940920, input voltage: 400 V, type of input current: three-phase, The robot has been working flawlessly for 7 years in our facility, performing the automated unloading of furniture panels from the drilling line. Iijdozyrx Aopfx Agysh

Condition: good (used), Year of construction: 2005, operating hours: 76,988 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, plate length: 600 mm, plate height: 670 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, Equipment: documentation/manual, ENGEL Victory 200/80 Tech Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control System: CC100 Year of Manufacture: 2005 Operating Hours: 76988 h Technical Data - Clamping Side Clamping Force: 800 kN Platen Size h x v: 670 x 600 mm Minimum Mold Height: 250 mm Maximum Mold Height: 700 mm Opening Stroke: 450 mm Ejector Stroke: 100 mm Ejector Force: 40 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Tool Weight: 675 kg Technical Data - Injection Side Screw Diameter: 30 mm Injection Volume: 99 ccm Injection Pressure: 1450 bar Screw Length: 20 l/d Screw Stroke: 140 mm Plasticizing Rate: 17 g/s PS Free Injection Flow Rate: 150 g/s PS Number of Heating Zones: 4 Nozzle Length: 200 mm Dimensions & Weight Machine Dimensions L x W x H: 4.05m x 1.93m x 2.2m Total Weight: 5200 kg Equipment Screen text: German CEE socket 16A Core pull hydraulically 1x Machine including conveyor belt Machine including handling system Machine with water manifold Machine without material hopper Leveling elements Schuko socket 10A Technical Data - Handling System Machine Type: Linear handling system Manufacturer: Engel Iodpfx Agsz Ayttjyeih Control System: ER-HLI 31 VC Year of Manufacture: 2005 Handling System Weight: 2 kg Screen Text: German Total Weight: 250 kg

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: Iodpfx Agez Irfvoyjih - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.