Used Egli Ekb4-1Ep (Cbm) for sale (331)

Condition: used, machine/vehicle number: 008346, Max width workable: 1300 mm Max length workable: 1250 mm Max height workable: 650 mm Nlodpfxjyl Ihre Anksd

Condition: good (used), Year of construction: 2011, Load moving system Nledpfx Aewvhrtenkjd CBM 240 / ST 120 MACH-ID 923 Type: CBM 240 / ST 120 Year: 2011

Condition: refurbished (used), The EGLI 1700 Butter Churn is capable of a capacity of 900 litre of cream with a 60% butter output. The machine materials are stainless steel 316 L at contactable surfaces with the product. The gears and motors are covered with metal with a paint coating. The machine was used for very little after full refurbishment in 2022. New control panel for the start of the churn . Butter Churn: EGLI Volume: 1700L total capacity Nsdpfx Ansx Nca Eskjld Cream capacity: 850L S.N: DM1700UK Condition: Refurbished Available: immediately Location: In stock

Condition: used, maximum load weight: 32,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 07/2027, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2022, Equipment: ABS, KÄSSBOHRER stainless steel tank semi-trailer, 28,000 liters for AdBlue First registration 05/2022, from first owner Mileage 288,952 Tank saddle trailer made of V2A stainless steel, 100 mm insulation, Volume 28 cubic meters, with 2 baffle plates. Njdpfxjzng S Hj Ankjld The front baffle plate is closed at the bottom, so that approximately 5,000 liters remain in the first compartment above the kingpin. Drainage is via an outlet with a butterfly valve, ending in the rear compartment. 1 x filling dome/manhole DN 500, Aluminum short chassis, Wabco trailer EBS with RSS anti-roll protection, BPW axles with disc brakes, Tires 6 x 385/65 R 22.5, Shiny aluminum rims, 1st and 3rd axles are lift axles, Access ladder on the right side of the tank, Data acquisition using BARTEC PETRO 3003 Chem with a compact controller, printer in a protected stainless steel cabinet, wireless remote control for hose reel, metering system and rear roller shutter, 20 m dispensing hose DN 50, 1x Vogelsang rotary lobe pump GL186Q, self-priming, tank filling with its own pump, fast loading and unloading with up to 600 l/min delivery rate, Overfill protection, internal and external, Pneumatic roller shutter with wireless remote control, 2" dispensing device Very well-maintained and clean condition, immediately available RENTING is the new BUYING, and with us, full-service rentals are also immediately available.

Condition: used, maximum load weight: 29,770 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2024, Equipment: ABS, H&W (Vreden) AGRAR – Walking Floor 70 cbm, fully equipped First registration 06/2024 Mileage 77,648 km Dimensions (L x W x H): 11,560 x 2,480 x 2,360 / 2,566 mm (tapered design) Saddle height: 1,250 to 1,300 mm Overall height: 3,900 mm SAF axles “Off-Road” with large disc brakes, 430 mm WABCO trailer EBS with RSS stability program Nlodpfszmqmrox Ankjd Chassis: Fine-grain steel, hot-dip galvanized Forced steering on the 1st and 3rd axles, TRIDEC system with rod steering 3x central lubrication points, externally positioned Tire size: 6-ply 445/65 R 22.5 Cargo Floor: AGRAR floor with 15-plank system, reinforced design, 10 mm WIRELESS remote control for floor and rear door Side wall profiles completely welded from the inside (grain version) 2x reinforced crossbars Stainless steel wear plate at the rear, under the floor planks Headboard with cleaning door Hydraulic rear door with grain slide Hydraulic connections on the headboard and additionally on the support legs PNEUMATIC DIVIDER POSITIONER Roof tarpaulin with quick-release system RENTING is the new BUYING; with us, it is ALSO available immediately in a full-service rental package.

Condition: used, maximum load weight: 27,360 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 04/2024, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,265 mm, Year of construction: 2024, Equipment: ABS, KÖGEL 2-axle HardoX Halfpipe Tipper Trailer, 27 cbm First registration 04/2024 Mileage 128,729 km Permissible total weight 33,000 kg Fifth wheel load 15,000 kg Unladen weight 5,640 kg Loading height only 3,265 mm CRAMARA electric cover with remote control pneumatically folding underride guard hinged tailgate tipper body with HardoX HB450 steel, 5 mm thick Njdpfx Anezlmpmskjld Tires 4 x 385/65 R 22.5, tread depth 10 to 12 mm ALCOA aluminum rims, glossy black WABCO Trailer EBS Premium with stability program WABCO Smartboard reinforced SAF axles "CD" Offroad with large disc brakes, 430 mm 1st axle: lift axle Trailer brake RENTING is the new BUYING, and with us, it is immediately available in a full-service rental arrangement.

Condition: used, empty load weight: 6,440 kg, maximum load weight: 27,560 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 02/2025, loading space length: 10,500 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, loading space volume: 57 m³, suspension: air, color: silver, Year of construction: 2025, mileage: 1,53,649 km, gearing type: mechanical, Equipment: ABS, Unladen weight: 6440 kg, permissible total weight: 34000 kg, cargo space (L W H): 10,500 mm x 2,470 mm x 2,200 mm, cargo space volume: 57 m³, air suspension, lift axle: 3rd axle with forced steering, electronic braking system EBS, trailing steering, swing-open tailgate, slurry-resistant tipper body, roof tarpaulin, platform, anti-splash guard, aluminum rims: ALCOA, axle load indicator, tarpaulin system, trailer information module, SAF axles, tires 385/65R22.5, palletized design, L10500 B2470 H2200 57m3, grain slide, saddle height 1200, VAVKSK339PH518676, sold on consignment, non-binding offer, subject to errors and prior sale. The image may not match the offer. Nledezcrukspfx Ankod

Condition: used, maximum load weight: 32,090 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 30 Code L4BH, for chemicals First registration: 01/2023 Nledpszkybmjfx Anked German registration, from first owner Approximate unladen weight: 6,910 kg Stainless steel chassis, highly polished BPW axles with large disc brakes, 430 mm 1st axle: lift axle Crank-operated support legs, steel, for full load 6 tires, size 385/65 R 22.5, tread depth 70 to 80% Aluminum rims KNORR trailer EBS Tank: 30,000 liters, made of stainless steel 1.4571 AISI 316 Ti Operating pressure: 3.0 bar / Test pressure: 4.0 bar Insulation: 100 mm glass wool 1 compartment with 3 bulkheads 4 manhole covers 1 venting valve, Fort Vale 1 safety valve 1 check valve Air line on the right side, DN 50, with TW 50 connection at the front right Heating preparation for 4-channel hot water 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling 1 purging device Pneumatic bottom valve Hoses, left and right, DN 150, approx. 6 m long RENTING is the new BUYING; with us, it is also available as a full-service rental.

Condition: used, maximum load weight: 33,450 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2024, Equipment: ABS, 3-axle tank semi-trailer KÄSSBOHRER, type STC 28/1-10/24 First registration 04/2024, German semi-trailer, first owner Nodpfxjzbwy Nj Anksld Mileage only 52,629 km Permissible total weight 39,000 kg Permissible saddle load 12,000 kg Unladen weight approx. 5,550 kg Wheelbase approx. 5,900 mm Saddle height approx. 1,200 mm Tank semi-trailer made of V2A stainless steel, material 1.4301 Insulation 100 mm Volume 28 cbm, with 2 baffle plates Discharge via outlet with butterfly valve, ending in the rear compartment 1 x filling dome/manhole DN 500, walkway around the dome Fixed access ladder, on the right side of the tank Aluminum short chassis Mechanical landing gears JOST, 24 tons Wabco Trailer-EBS-E Type 4S/2M with RSS anti-roll protection BPW axles with disc brakes Tires 6 x 385/65 R 22.5, tread depth 10 to 12 mm Aluminum rims, polished 1st and 3rd axles are lift axles Access ladder on the right side of the tank with APOLLO pump, type Magnum L, self-priming centrifugal pump 3" in the rear compartment. Due to the special design of the Magnum centrifugal pump, the pump can also draw in a gas/liquid mixture. For the transport of liquid fertilizers, pesticides, urea, AHL, whey, etc. Pressure Hmax: 0-3 bar Flow rate Qmax 500 - 1000 liters/min. Free-fall connection RENTING is the new BUYING, with us, full-service rental is also IMMEDIATELY available.

Year of construction: 2026, condition: new, functionality: fully functional, For sale: 2.6 cbm skip container with steel lid Nsdpfx Aezm Emtonkeld Product description: For sale is a 2.6 cbm skip container with a steel lid, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: • Base: 3 mm • Sides: 3 mm • Container frame: 70 x 50 x 4 • Lid: 1.5 mm sheet metal • Pins: ø 45 mm • Single tilting bearing (pin ø 45) • Lid opening system • White and red information and warning stickers • The entire range of RAL colors is available • Zinc phosphate primer inside and outside, exterior painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to sturdy hinges Weather-resistant due to corrosion-resistant coating

Condition: used, maximum load weight: 33,162 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2024, loading space length: 9,790 mm, loading space height: 2,100 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you, subject to availability until the conclusion of the sale, the following vehicle: 5 x Schmitz, approximately 50 cubic meter grain hopper First registration: 01.10.2024 Low mileage Permissible total weight: 39,000 kg Unladen weight: 5,838 kg Payload: 33,162 kg Overall length: 10,910 mm x overall width: 2,550 mm x overall height: 3,800 mm Aggregate load: 24,000 / 27,000 kg Saddle load: 12,000 / 12,000 kg Axle distance: 1,310 mm Saddle height: 1,260 mm Ride height: 440 mm Wheelbase: 6,600 mm Tires: 385/65R22.5, approximately 50-80% tread Schmitz coupling 1st lift axle ALCOA aluminum rims Tire pressure monitoring system Plastic individual fenders TÜV (technical inspection) valid until 10/2024, next inspection due 04/2027 Rear underrun protection, foldable Low-pressure cylinder 170 BAR max 190 BAR Hyfa Air suspension with lifting and lowering function Automatic tilting function Load pressure gauge 2 x wheel chocks 2 x 12-ton, 2-speed gear winch Jost 2 x LED reversing lights Tow hitch with drawbar eye Storage box, plastic Roll tarp, platform Aluminum box body, 9.6 m with hinged tailgate with rubber seal + grain slide + dust bag Height: 2,100 mm, length: 9,790 mm, 2.5 mm rounded bottom rail, front panel inclined by 20 degrees (conical body) Load volume: approximately 49.7 cubic meters Aluminum floor, reinforced at the rear, approximately 8 mm, at the front, approximately 7 mm Tipping body, light gray 7.035, chassis Schmitz Granit AKZO 499H3 7350 Price per vehicle: €41,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to a value of €10,000. For disputes exceeding this amount, the regional court of Schwerin is the place of jurisdiction. Subject to errors, typos, and prior sale. Nsdpfx Aezn Dw Hjnkjld

Condition: used, maximum load weight: 34,740 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 8,870 mm, loading space width: 2,325 mm, loading space height: 2,100 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 3,637 mm, Year of construction: 2026, Equipment: ABS, STAS 3-axle HardoX steel tipper, 45 cbm, "X-Shape" First registration: 03/2026 New vehicle Dimensions (L x W x H): 8,870 x 2,350/2,450 x 2,100 mm (tapered design in width) Unladen weight: only 7,260 kg Z-chassis, curved design Floor: continuous 5 mm HardoX steel HB450 Front and side walls: 4/3 mm HardoX steel HB450 Sloping front wall, with internal steps 2-wing portal doors, pneumatic secondary release 1 grain slide in the right door leaf Reinforced roof cover, central locking HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU saddle supports, full load capacity 2 air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid WABCO trailer EBS with anti-roll protection RSS WABCO Smartboard Automatic tipping lowering Lifting and lowering device Nodpfx Aneziwl Hjkeld Tires: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, full-service rentals are immediately available.

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) Nledpfov Dz Ixsx Anksd 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Nsdpfjy Urtfsx Ankeld Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, maximum load weight: 29,700 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 06/2023, loading space length: 7,400 mm, loading space width: 2,320 mm, loading space height: 1,800 mm, loading space volume: 31 m³, 3-axle tipper semi-trailer with aluminum body, loading volume approx. 31 cubic meters, opposing rear wall, electric sliding cover, OKUSLIDE lining, ladder with bracket on the left, 1st axle liftable. ----* Lift axle * BPW axles * Lifting and lowering device for air suspension * Sliding cover * Disc brake * Air suspension * Aluminum rims * EBS * Without spare wheel Nledpfx Anszag Eroked ----For sale only to commercial businesses! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to provide you with a leasing or financing offer.

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip loader container, 5.5 - 12 cbm, with steel lid. Product description: For sale is a 10 cbm skip loader container with a steel lid, manufactured according to DIN 30720‑1, ideal for the transport and storage of waste, bulk materials or industrial materials. The container is robust, safe and ready for immediate use. Technical data: Standard: Technical description 30720‑1 • Bottom: 6 mm S 355 • Sides: 4 mm S 355 Nledpfx Anszmh R Ioked • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (pin Ø45) x 2 • Stacking bar: 5 mm • Securing bar • Front profile: 120 x 60 x 4 mm x 2 • Frame edges: U 100 x 50 x 4 mm • With steel lid - 1.2 mm • Information and warning stickers, white and red • The entire range of RAL colors is available • Zinc phosphate primer inside and outside, painted with synthetic resin paint (80-100 μ) outside Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to flap and sturdy hinges Stackable and transportable with tilting truck systems Weather-resistant due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, For sale: 4-10 cubic meter skip loader with a flap Product description: For sale is a 4-10 cubic meter skip loader with a flap, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: * Standard: Technical description 30720-1 * Base: 6 mm, steel S355 * Sides: 4 mm, steel S355 Nljdpfszmhuysx Ankjd * All sheets and profiles are welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking rail: 5 mm * Securing rail * Frame edges: U 100 x 50 x 4 mm * Frame edges flap: U 100 x 50 x 4 / 100 x 50 x 6 mm * Information and warning stickers: white and red * Color: entire RAL color palette available * Coating: zinc phosphate primer inside and outside, painted with synthetic resin paint outside (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the flap and sturdy hinges * Stackable and transportable with tipping truck systems * Weatherproof due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, Selling a roll-off container, 4-20 cubic meters, without a lid. Product description: For sale is a 4-20 cubic meter roll-off container without a lid, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: * Standard: Technical description 30720-1 * Bottom: 6 mm, steel S355 * Sides: 4 mm, steel S355 * All sheets and profiles welded Nedpfx Anjzmhdhokold * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking bar: 5 mm * Securing bar * Front profile: 120 x 60 x 4 mm * Frame edges: U 100 x 50 x 4 mm * Information and warning labels: white and red * Color: entire RAL color range available * Coating: interior and exterior with zinc phosphate primer, exterior painted with synthetic resin paint (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the lid and sturdy hinges * Stackable and transportable with tilting truck systems * Weather-resistant thanks to corrosion-resistant paint

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, loading space volume: 34 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 34 Code L4BH, for chemicals First registration 05/2023 German registration, from first owner Ø Unladen weight approx. 7,580 kg Ø Stainless steel chassis, highly polished Ø BPW axles with large disc brakes, 430 mm Ø 1st axle: LIFT AXLE Ø Crank-operated support legs, steel, for full load Ø 6 tires, size 385/65 R 22.5 Ø Aluminum rims ALCOA Dura-Bright, high-gloss Ø WABCO trailer EBS with RSS anti-roll protection Ø Tank: 34,000 liters, stainless steel 1.4571 AISI 316 Ti Ø Operating pressure: 3.0 bar / Test pressure: 4.0 bar Nodpfex Rtafjx Ankjld Ø Insulation: 100 mm glass wool Ø 1 compartment with 4 bulkheads Ø 5 manholes, 3x DN500 and 2x DN350 Ø 1 vent valve, Fort Vale Ø 1 safety valve Ø 1 check valve Ø Air line on the right side, DN 50, with TW 50 connection at the front right Ø Heating preparation, 4-channel hot water Ø 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling Ø 1 purge device Ø Pneumatic bottom valve Ø Hoses on the left and right, DN 150, approx. 6 m long RENTING is the new BUYING, also available with us in a full-service rental arrangement.

Condition: used, maximum load weight: 35,850 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space length: 10,648 mm, loading space width: 2,470 mm, loading space height: 2,100 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,640 mm, Year of construction: 2023, Equipment: ABS, GRANALU 3-axle FULL aluminum box tipper GRANALU 55 cbm, WATER-TIGHT First registration: 01/2023, from first owner Mileage only 68,989 km Loading length: 10,648 mm Side height: 2,100 mm Internal width: 2,470 mm Total height / loading height: only 3,640 mm Unladen weight: only 6,150 kg HYVA tipping cylinder, type ALPHA, suitable for low and high pressure Continuous 6 mm highly wear-resistant HERKAL trough floor Aluminum wave breakers on front and rear wall, extending approx. 600 mm into the body (removable) Nlsdpfx Asw I Ixvsnkod Single-wing rear door with swinging function and pneumatic 4-point locking system, waterproof design JOST axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE WABCO trailer EBS with RSS rollover protection 6x 385/65 R 22.5 tires Aluminum air tanks 2 LED reversing lights Full-load aluminum landing legs RENTING is the new BUYING—immediately available from us with full-service rental option.

Condition: used, maximum load weight: 32,820 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,730 mm, Year of construction: 2024, Equipment: ABS, SCHWARTE-JANSKY stainless steel V2A slurry tanker semi-trailer, 30,000 liters First registration 03/2024 Unladen weight only 6,180 kg BÖRGER rotary lobe pump, output max. 6,000 liters/min., with interchangeable housing shells, design without gearbox Automatic pump shut-off, filling level of the tank can be easily adjusted by the driver Flushing line DN150, with 3 outlets (in front of each baffle and in front of the front floor) 2x baffle plates Manhole cover DN500 Suction funnel 8" at the top rear Hose trays, stainless steel, approx. 6,000 mm long on the left Swivel outlet at the rear in 6" with Perrot coupling Emptying device for the product hose All valves pneumatically operated, including monitoring function Valve control with WIRELESS REMOTE CONTROL Nlsdpfsy S Npxsx Ankod Complete piping system made of V2A stainless steel SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE 3rd axle: Steerable trailing axle WABCO trailer EBS with RSS stability program Tires 6x 385/65 R 22.5 Saddle height approx. 1,150 to 1,250 mm Crank-operated full-load saddle supports Stainless steel storage box on the left, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING; with us, it is also immediately available with a full-service rental.

Condition: used, mileage: 1,001 km, color: orange, driver cabin: other, gearing type: other, loading space volume: 13 m³, loading space length: 4,600 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, Vehicle location: Bovenden, steel body Body: for 3-axle trucks, approx. 13 m³, hydraulic tailgate. Roof protection. Nsdpfx Anevhgy Uokeld ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, maximum load weight: 31,640 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle SCHWARZMÜLLER Full-ALU Walking Floor Semi-Trailer 91 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,470 x 2,680/2,780 mm Fifth-wheel height: 1,150 to 1,200 mm Axle distance: 1,310 mm Unladen weight: 7,380 kg ALU chassis SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version WABCO trailer EBS with roll stability support (RSS) 1st axle lift axle Nedpfeyrlcgox Ankold Aluminum air tanks 6x 385/65 R 22.5 tires JOST full-load crank landing gear ASPÖCK full-LED lighting 4 x LED work lights Toolbox rear left Full-length seam-welded interior wall profiles CARGOFLOOR moving floor with 21 slats, material thickness 8 mm ribbed Remote control operation Rear end plate made of stainless steel 3 bows, reinforced for waste transport Reinforced roof tarpaulin PANAMA 900 g/sqm Swinging rear cross beam With grain hatch in left door leaf 15 pairs of recessed lashing rings in the end profile RENTING is the new BUYING – available from us immediately, also in FULL-SERVICE RENTAL.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 08/2023, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,740 mm, loading space volume: 90 m³, Year of construction: 2021, Equipment: ABS, ecoSTAR 90 cbm graphite black ECOSTAR FE CHASSIS - V13500 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: 13500 MM Internal body width: 2475 MM Internal body height: 2650/2740 MM Body volume: 90 cbm Saddle height: 1150-1180 MM TECHNICAL DESCRIPTION Nsdpfozfdgiex Ankold 1. FRAME SUBFRAME High-quality construction made of steel S355JR (= ST52.3). Chassis not painted, but galvanized (EN ISO 1461), hot-dip galvanized. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 T Suspension: Original SAF air suspension Brakes: large disc - INTEGRAL Offset: ET 120 BVA: with BRAKE WEAR INDICATOR LIFT AXLE FUNCTION The third axle is a trailing lift axle (front/rear internal height 2650/2740 mm) + first axle is a lift axle. STARTING ASSISTANCE activated when a button is pressed in the truck (truck equipment not included). AIR SUSPENSION Lifting and lowering mechanism. Aluminum air reservoir. TIRES 6 x 385/65 R 22.5 on steel rims. ET 120. SADDLE SUPPORT JOST module with leveling supports for air-suspended vehicles. Mechanical version with single-sided operation and 2 speed levels. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-line pneumatic braking system acc. to CE guidelines. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets. REAR LIGHTING IN THE UNDERRIDE GUARD. With aluminum lighting protection (foldable). 2 x 1 five-chamber lamp - EUROPOINT III - LED version. WORK LIGHTS ON THE FRAME 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control panel. EXTRA WORK LIGHT 1 work light (Workpoint LED) on the front wall (INSIDE - right) - with switch at the front. HYDRAULIC SYSTEM Pressure: ? Female. Return: 1 Female. HYDRAULIC POSITION Connection on the front wall. With extra connection option below the body in front of the support legs. Aluminum access ladder (3.7 m) attached to the side underride guard (right). RETRACTABLE LADDER AT THE REAR integrated at the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking, with 1-piece cover plate (tarpaulin not possible). TOOLBOX PVC with key (800 x 460 x 430 mm). At the rear LEFT. POSITION CONTROL CONSOLE + HYD. SYSTEM BOX The control console is mounted at the rear left. The box for controlling the floor is also mounted at the rear left. FENDERS 6 plastic single wheel fenders. 2 Clear Pass mud flaps are permanently mounted on the plastic fenders. 2. TIPPER BODY FRONT WALL The front wall consists of 30 mm thick aluminum plank profiles type 600 with reinforced corner connections. COVERING INSIDE BETWEEN FLOOR-FRONT WALL Permanent sealing between floor and front wall by means of aluminum profile and PVC sealing. SIDE WALLS Side walls in smooth design inside and out. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded on the inside. SLIDING FLOOR SYSTEM CARGO FLOOR CF 500 SL-C Electric control. 21 floor slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. Rear end plate made of aluminum. FLOOR SYSTEM OPERATION Electric control - electrically with wireless remote control (original Cargo Floor + Multif

Condition: used, maximum load weight: 29,400 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,700 mm, loading space width: 2,350 mm, loading space height: 1,900 mm, loading space volume: 35 m³, Year of construction: 2019, Equipment: ABS, Air suspension, lifting mechanism, BPW axle, EBS (Electronic Braking System), aluminum support legs, PVC partial wheel arches, 2 x twist locks, side impact protection (right), access ladder, foldable UFS (underfloor storage) made of aluminum, reflective sign, aluminum rims, load indicator, aluminum tipper body, floor 10 mm thick, wear plate on the floor 7 mm thick, side walls and front wall 7 mm thick, side wear plates 5 mm thick, rear wall 10/5 mm, Cramaro tarpaulin system. Nledperxa Npjfx Anksd