Walking floor semitrailer

STAS Agrar- Walkingfloor 70 cbm, Lenkachse, MIETEN?

Condition: good (used), tem: D-7856-Samson-steam Valves Diverse steam valves made by Samson complete with control box! For more informations please contact us! Dcodpfx Aeirfb Eoddjr DN 20/DN40/DN50/DN65/

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured in self-supporting ALUMINIUM construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINIUM, 140 mm frame height! (max. 39t) Axles and Suspension “Disc Brakes 22.5” Jost axle assemblies 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axles separately liftable with start-up aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tyres and Wheels 6 wheels with tyres 385/65 R 22.5 as per manufacturer selection, Alcoa aluminium rims DuraBright - 11.75x22.5 ET 120, kingpin bolted into a 10 mm thick plate Landing Gear Aluminium drop-leg landing gears, 2 x 10 t support load, for air suspension we use swivel feet Brake System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring-loaded brake system acting on two axles with control at rear, aluminium air tank system, premium modulator Electrical System According to STVZO regulations with 2 LED five-chamber tail lights type Aspöck Europoint LED integrated in aluminium rear closure, 24 volt system with 1x 5-pin and 2x 7-pin sockets, side marker lamps in LED, 2 separate LED work lights at rear, 2 LED work lights at first landing gear height, 1 LED work light inside front left, operable from outside Dcodpfofakkcsx Addor Body/Tipper Body "Body fully welded on the inside" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN. Aluminium body, side walls made of 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on inside, floor as moving floor system laid on 140 mm ALU cross beams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in beveled version, flat rear wall in straight design with 2 ALU swing doors 50/30 mm, with 4 locking bars in welded ALU rear frame mounted in Teflon and stainless steel bearings, continuous reinforced ALU upper flange supporting ALU wall with "Kevlar tarpaulin for complete emptying, side brush seal, additional side Kevlar tarpaulin, integrated discharge chute with folding cover plate at rear left bottom, operable from outside, inspection window rear left, one sampling flap in each rear door (2 pcs.), service door front left Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles mounted on ALU square profiles with approx. 670 PE-HD sliding plates, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed parts at front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with sizes and type to be specified, operating pressure 190 to max. 240 bar, ALU end pieces welded into floor, electric control rear left with cable control in a lockable waterproof box, Accessories PVC mudguards with rubber mud flaps, ALU spare wheel carrier, side ALU underrun protection in folding version, 1 tool box approx. 800x460x430 mm in plastic, approx. 3.7 m ALU ladder, rolling tarpaulin 680 g/m² quality with rolling tarpaulin system incl. sides.

Condition: as good as new (ex-display), Year of construction: 2017, rotary vane vacuum pump Busch with 3 KW AC-Motor, 150 m³/h, vacuum: 0,1 mbar, 1 year warranty Dsdpfsm Tv E Iox Addocr

Condition: new, axle configuration: 3 axles, Equipment: ABS, Kässbohrer tank container chassis SHF-T 20'' Delivery time: Short-term from stock!! Empty weight approx. 3,280 kg Color: NOVA GRAY Chassis & axles # BPW axles with disc brakes 22.5 inches # Wabco brake system EBS 4S/2M with RSS # Wabco air suspension system # 6 x branded tires 385/65 R 22.5 on "Alux" aluminum rims # 1st axle as lift axle # 4 x JOST container locks Other & accessories # Aspöck 24V lighting # 2 hose pipes in the chassis # ADR / dangerous goods sign, foldable, rear left # Fire extinguisher box WITHOUT fire extinguisher Dcedpfxsimvpae Adder ----Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in Goch

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2026, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2023, Equipment: ABS, 3-axle KA?SSBOHRER food pressure tank 3-chamber 32,000 liters with diesel heating and UNIBLOCK pump First registered 01/ 2023, as good as new Fifth wheel height approx. 1,180 mm Empty weight approx. 7,580 kg VA tank AISI 304 3-chamber with division 12,500 / 7,500 / 12,000 liters Insulation 100 mm glass wool, jacket sheets stainless steel mirror sheet, end floor GRP Pneumatic bottom valves DN80 3 INDIVIDUAL OUTLETS insulated, ending in the rear cabinet with collector 3 = 1 Dcsdop R Drgopfx Addor UNIBLOCK food pump type 551M2 stainless steel, electric motor 7.5 kW, with frequency converter Tank diameter 2,000 mm Test foot pressure 3.0 bar Operating pressure 2.0 bar 3x dome cover DN 500 with overflow box Stainless steel cleaning/air line DN50 with microfilter Diesel tank heater EBERSACHER Hydronic 30 kW Stainless steel hose pipes left and right, length approx. 6 meters Chassis stainless steel BPW axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS with stability program RSS Air tank aluminum Tires 6-fold 385/65 R 22.5 BRIDGESTONE Aluminum rims RENT is the new BUYING, also available immediately with us in full-service rental-----

Year of construction: 2013, condition: excellent (used), Heat exchanger / SPIRAFLO. Type - XTSD 104/64-6-304/316-C Is made in 304 and 316 steel. Year of manufacutre - 2013. Empty weight - 2.000kg. Total dimensions - Length - 700cm. Width - cirka 235cm. Height - 200cm. Dedpfxohtuu Us Addocr

Year of construction: 2010, condition: used, Waelz piston pump booster vacuum pump Manufacturer: Busch Dcjdpfx Aodnvgtjdder Type: Puma WP 1000 D2 Status: used, tested A complete overhaul can be offered as an alternative. Then with 12 months warranty on the device.

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/1996, * 3 chambers Dcedpfx Aetu Slpjddjr * Drum brakes * Air suspension * Own weight: 7,200 kg ----Internal vehicle number: 9539----Subject to errors and prior sale.

Condition: good (used), 48 linear meters of pallet racking SSI Schäfer PR600 Used goods, good condition, see pictures height 6.75 m depth 105 cm Beam length 3.6 m Load per compartment 4000 kg Galvanized frame Beam blue Negotiated price: € 4.650,-- net ex stock Dodpfetgpb Uox Addecr Optionally available inlay sheets galvanized 1 level à 3,6m surcharge 100,- € net Offer consists of: + 14 pre-assembled frames, depth 105 cm, height 6.75 m + 78 beams, length 3.6 m, 4000 kg load/shelf +156 pcs. suspension locks + 56 concrete anchors Load plates Goods are in stock. Transportation and assembly possible on request. Inspection possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Dsdpfoxc Axrjx Addscr Brake system WABCO EBS-E according to EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED