Used Elvi Actuator for sale (589)

Condition: used, Servomotor, actuator, air flap servomotor, geared motor -Manufacturer: ELVI, actuator -Servomotor: Type 100605 -Voltage: 24V -Quantity: 3x drive available -Price per piece -Dimension: 190/110/H125 mm Fjdpergbvkofx Aatopl -Weight: 1.6 kg/pc.

Condition: good (used), Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available -Price: per piece -Dimensions: 220/200/H120 mm -Weight: 1.9 kg/pc. Fedpfx Aergbu Hjatspl

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! The system can be directly integrated into your existing mechanization! TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Shortest log length with an additional feed system: 1.5 m Maximum feed speed: 100 m/min MACHINE DETAILS Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Rotor opening: 80 cm Debarking rotor: 6-knife rotor Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Fpsdpfxszx Eaqj Aatel Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

Condition: used, functionality: fully functional, Koganei ORGA40X2750 Linear actuator. Good working condition. Please check out our other listings as well. Fpjdpfx Astwqqgsatel

Condition: used, functionality: fully functional, Hoerbiger Origa P120S-25 Linear actuator. Good working condition. Please check out our other listings as well. Fsdpetwqp Aefx Aatopl

Condition: like new (used), Year of construction: 2005, functionality: unexamined, For sale: complete industrial lot of 27 pcs FESTO DNG-160 pneumatic cylinders. Manufacturer: FESTO Model: DNG-160 Quantity: 27 pcs Type: pneumatic cylinders / heavy-duty actuators Condition: unused old stock / New Old Stock Age: approx. 20 years in storage Fodpfowxfrpex Aatopl Functionality: not individually tested Sale: complete lot only Location: Slovakia, EU The cylinders have never been installed or used, but have been stored for approx. 20 years. Due to the long storage period, inspection and possible replacement of seals before industrial use is recommended. Suitable for maintenance departments, machinery builders, automation companies, spare parts stock or industrial equipment dealers. Sold as shown in the photos. Loading possible. Worldwide shipping on request. Zum Verkauf steht ein kompletter Industrieposten mit 27 Stück originalen FESTO DNG-160 Pneumatikzylindern. Hersteller: FESTO Modell: DNG-160 Menge: 27 Stück Typ: Pneumatikzylinder / Industrie-Aktuatoren Zustand: unbenutzte Lagerware / New Old Stock (NOS) Alter: ca. 20 Jahre gelagert Funktion: nicht einzeln getestet Verkauf: nur als kompletter Posten Die Zylinder wurden nach unserem Kenntnisstand nie montiert und nie im Betrieb eingesetzt. Aufgrund der langen Lagerzeit werden sie jedoch ausdrücklich als ungetestete Lagerware verkauft. Eine Prüfung sowie ggf. der Austausch von Dichtungen vor industriellem Einsatz wird empfohlen. Geeignet für Instandhaltung, Maschinenbau, Automatisierungstechnik, Ersatzteillager oder Händler für Industriekomponenten. Verkauf wie auf den Fotos. Standort: Slowakei, EU. Verladung möglich. Versand auf Anfrage möglich.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) Fpsdpjyvh Nxofx Aatsl NO CE mark, NO CE declaration of conformity

Condition: new, pneumatic linear drive or slide cylinder from Festo. Festo DGPL-18-750-PPV-A-KF-B Part number: 161977 Max. operating pressure: 8 bar The DGPL is a pneumatic cylinder without a piston rod and with integrated guidance. Compressed air drives the slide back and forth along the long guide rail. The 750 indicates a stroke of 750 mm, and the 18 indicates the size/piston diameter class. Typical applications include positioning, moving, or feeding workpieces in machines and automation systems. Festo data sheet for part number 161977 Type DGPL-18-750-PPV-A-KF-B. • DGPL = pneumatic linear drive without a piston rod with integrated guidance. In this version, it is a ball bearing guide. • 18 = piston diameter 18 mm. • 750 = in your specifically labeled unit, 750 mm stroke. According to Festo, the series can generally be configured with strokes from 10 to 1800 mm. • PPV = pneumatic end-of-stroke cushioning, adjustable on both sides. The slide is thus pneumatically braked shortly before its end positions; Festo specifies a damping length of 16 mm here. • A = version with position detection/proximity switches; in this series, sensors can detect the position or end positions of the piston. • KF = ball bearing guide (in contrast, for example, to GF, which is a slide guide). It ensures precise and robust guidance of the slide. Fedpfx Aaszyltyetopl • B = variant/series identifier of the DGPL version. Important data for your drive It is double-acting, meaning it is actively moved in both directions with compressed air. The permissible operating pressure is 2–8 bar. At 6 bar, Festo specifies a theoretical force of 153 N in both directions – approximately equivalent to the weight of 15.6 kg, although the actually usable force is lower. The pneumatic connections are M5. Permissible ambient temperature: -10 to +60 °C. The two compressed air connections drive the internal piston. The piston is mechanically connected to the slide, which runs on the outside, via the longitudinal slot. This provides 750 mm of linear movement without a 750 mm long piston rod, which would have to extend an additional distance out of the cylinder.

Condition: excellent (used), functionality: fully functional, two milling units two motors with a power of 1.5 kW pneumatic shooting device sanding unit Fpsdjzz Nqrspfx Aatjl pneumatically actuated pressure shoe maximum belt width: 80 mm motor power: 1.5 kW pneumatic oscillation adjustment of units in two axes stepless feed speed adjustment power supply: 380 V

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. Fpodezx D Tcepfx Aatsl The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Year of construction: 2019, condition: new, functionality: fully functional, VALBIA SR 100 S.05 rotary pneumatic actuator with spring return. Manufacturer: VALBIA Type: SR 100 S.05 Product code: 82SR1918 Year of manufacture: 2019 Max. operating pressure: 8 bar Operating temperature: -20°C to +85°C Mounting connection: ISO F07 / F10 ATEX certificate: II 2 G/D c T6 CE marking DN50 Industrial valve with pneumatic rotary actuator Fedpsztpilofx Aatspl 400 EUR per unit. The picture shows two units.

Condition: new, Festo pneumatic linear actuator Festo DGC-25-500-KF-YSRW-A – Part number/module number 532447 The specifications mean: • DGC = rodless pneumatic linear actuator Fedpfszylndex Aatopl • 25 = piston diameter 25 mm • 500 = 500 mm stroke • KF = slide with recirculating ball bearing guide • YSRW = self-adjusting, progressive shock absorbers • A = for position detection/proximity switch This is not a cheap standard pneumatic cylinder. The exact model DGC-25-500-KF-YSRW-A is offered in the spare parts trade, for example, for €2,500 net. Festo itself continues to list 532447 / DGC-25 in its documentation database as a linear actuator. Festo DGC-25-500-KF-YSRW-A linear actuator, 500 mm stroke, recirculating ball bearing guide, part no. 532447.

Condition: used, Year of construction: 2014, operating hours: 3,473 h, fuel type: diesel, MOFFET M4 25.3 PIGGYBACK FORKLIFT ? 2.5T ? DUPLEX MAST ? ----VEHICLE HISTORY * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data Manufacturer: Moffett / Cargotec Ireland Ltd. * Type: M4 25.3 * Year of Manufacture: 04/2014 * Serial Number: N150234 * Operating Hours: approx. 3,473 h * Own Weight: 2,200 kg * Load Capacity: 2,500 kg * Load Center: 600 mm Drive Diesel Engine * hydrostatic drive, as far as can be determined on the unit * 3-wheel chassis * all-terrain design Lift Mast Duplex Mast * hydraulic lift mast * Lifting Height: approx. 4 m * robust mast guide * fork carriage Fork Equipment Fork Tines * hydraulic fork carriage * Reach Forks / Telescopic Forks according to documents * MSE KOOI Reach Forks * Type RE * Serial Number 1430060 Hydraulics Hydraulic Lifting Function * hydraulic mast actuation * hydraulic controls at the driver's station * additional hydraulic functions on the fork carriage, as far as can be determined from the images Chassis 3-Wheel Concept * large, rugged tires * all-terrain tires * compact piggyback forklift design * lateral support/wheel arm construction Driver's Station Open Driver's Cab * Driver's seat * Seat belt * Steering wheel * Control levers for hydraulic functions * Instrument/control display * Hour meter Lighting Front Headlights * Rear Lights * Turn Signals / Position Lights * Rotating Beacon Safety Driver Protection Bar * Seat Belt * Warning Lights * Acoustic Warning Device * CE Marking * Sound Power Level 107 dB LWA * Declaration of Conformity available Design / Application Piggyback Forklift * suitable for truck transport Fodpfxszz Ed Ie Aatepl * compact design * suitable for construction sites and off-road use * laterally transportable / foldable chassis construction Tires Rugged Industrial Tires * Off-road profile * Different signs of use on the tires are visible * Tread partially still present Condition Used Overall Condition * Signs of wear and tear due to age and use * Paint damage present * Signs of rust / surface corrosion * Fork tines with signs of wear Documentation CE Marking * Declaration of Conformity for Reach Forks available * Nameplate available ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS PLATES AND 15 DAYS AUSTRIA PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID A deposit of at least 500.00 EUR / 1,000.00 EUR will be charged for sales to EU and third countries. Changes, errors and prior sale reserved! You can find more vehicles on our Sales are exclusively subject to our general terms and conditions - see homepage. Important Note - Important Information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems.

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator Fsdpfsum I Sfjx Aatopl ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Item location is 75053 Gondelsheim Used condition, see pictures Shipping by forwarding agent or collection by appointment

Condition: used, functionality: unexamined, machine/vehicle number: SAF 30NC, Used AMG-PESCH SAF 30NC pneumatic actuator with valve Fedpexp H Evefx Aatepl Manufacturer: AMG-PESCH GmbH Model: SAF 30NC With Festo vsnc-fc-m52-md-n14-f8 “solenoid valve” For sale per set

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. Fodszu Nm Hjpfx Aatjpl * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Year of construction: 2009, condition: like new (used), Tuflin chick valve, DN 80, with pneumatic actuator and electric switching module Manufacturer: Xomox Nominal size: DN 80 Material: 1.4408 (V4A) Pneumatic actuator: Part No.: 716301-5 Article No.: XRP-RO53800148KXD40 Fjdpfx Aed Rww Isatjpl Year of manufacture: 2009 Pmax (psi): 5/70 QSP: 8 In very good condition! Tuflin chick valves, some unused, therefore in new condition!

Condition: excellent (used), Piping material made of PE, Tyco/Victaulic, Sanpress, Prestabo, Sanpress Inox, Georg Fischer composite pipes, Belimo actuators, mostly unused; more images and lists available upon request. Many items are packaged and ready for shipping. Fpodpfezzyu Iox Aatol

Condition: used, Spring actuated self-levelling pallet turntable, capacity 2000 kg Spring actuated turntable, which keeps palletised loads at an optimal working height, using a system of calibrated springs and shock absorbers. No power source or compressed air required. Lowers the risk of fatigue and injury. Reduces the time taken for loading and unloading pallets by over 40%. Fitted with fork pockets for easy relocation. Smooth running ball bearing turntable, which eliminates the need to walk around or stretch over the unit. Height 240mm (compressed), 710mm (extended). Turntable dia. 1100mm. Weight: 160kg. CE marked. Fedozz Ranjpfx Aatjpl

Condition: used, mileage: 1,31,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: * Total tank volume 9770L, diameter 1600 mm * Hydraulically fully opening bottom flap with hydraulically actuated central locking * Separation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/Sludge 6880L * Position 2: Water chamber 4360/Sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m HD hose DN25 with automatic hose guide * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun * Cassette deck for storing the suction hose DN125 * HD pump Uraca KD718 G60 with 648 l/h * Vacuum pump Kaiser VPC 60 with 1625 l/h * Total operating hours of the vehicle: 8118 h * Hand washbasin * Cable winch, hydraulically operated, mounted on swiveling reel * Control panel on the right at the rear of the vehicle * Control panel on the swiveling reel * Operation also possible via radio remote control * Vehicle with radio remote control * Axle load, front axle: 8.0 t * Trailer socket 12V / 13-pin * Audio system: CD radio (Bluetooth) * Exhaust pipe extended behind the cab * Battery 220 Ah * Compressed air connection in the cab * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Cab: steel-sprung, comfort * Suspension: front springs 8.0 t, 2 leaves * Transmission: 12-speed - Type: G 330-12 * Rear axle: differential gear 300 * Communication interface * Fenders, 3-piece * Engine compartment encapsulation, reinforced * Tag axle, steered, liftable * Auxiliary drive MB 123-10c * Parameterizable special module * Reversing warning, acoustic (warning signal externally) * Rear cross member, reinforced * Circuit breaker * Seats in the cab: driver's seat, sprung comfort seat * Sun visor, exterior * Sunblind, side window, driver's door * 12V socket in the front passenger footwell * 24V / 25 A socket in the front passenger footwell * Rotating beacon * Two-plate clutch * Oil cooler, transmission Additional equipment: * Emission standard EURO 6 * Axle configuration: 6x2 * Trailer brake, 2-line * Connections on the left, trailer socket 24V / 15-pin * Antos * Exterior mirrors, electrically adjustable and heated * Differential lock, rear axle * ClassicSpace * Stowage flap, exterior left * Cab floor with engine tunnel 320 mm * Cab: mounting height 420 mm * Suspension: leaf / air * Window lifts, electric * Windshield, tinted * Generator 100 A * Transmission: 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Lift roof, manual (steel) * Info display 10.4 cm * Comfort locking system * Fuel tank: 290 liters, aluminum * Air intake from the front * Air compressor, 2-stage * Engine 10.7 L - 315 kW R6 Diesel (OM 470) * Tag axle, single-tired * Ramp mirrors * Waste heat utilization Fedpfx Aaezz Tz Ijtopl * Disc brakes, front and rear axle * Errors, changes and prior sale reserved.

Condition: used, functionality: fully functional, Festo DGC-32-3600-KF-PPV-A Linear actuator. Two units in stock, price is for one pc only. Fpjdpfxotwqt Is Aatel Good working condition. Please check out our other listings as well.

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-2180-PPV-A-B-KF-SH LINEAR ACTUATOR Pressure: 2…8 bar. Good working condition. Please check out our other listings as well. Fjdpfx Aaetwqtbjtepl

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. Fodezx D A Dspfx Aatopl The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13/15, Equipment: documentation/manual, DRYER FOR FRESH PASTA, FRUIT, NUTS ESC100 Dryer that allows the wrapping, pre-dressing and drying of short, long and stuffed pasta, as well as the drying of pasteurized pastes before a possible packaging. Capacity for drying cycle: 100 kg approx Fjdpfx Aetrd N Eoatepl Panels injected with hot injected polyurethane foam, with high thermal stability, in white pre-painted sheet Electric heaters for air heating (1,2 Kw x 3 = 3,6 Kw) 500 mm axial fan for forced air circulation (1 Kw approx.) Electrical panel with PLC board for setting and checking drying phases N ° 2 Butterfly valves controlled by Belimo electric actuator Probe for internal humidity control Instrumentation for checking drying and temperature times controlled by an EC-compliant electrical panel with programmable digital electronic card N ° 25 frames in fir wood 600 x 1200 mm, with polyester mesh and aluminum sealing bars N ° 1 Stainless steel trolley on wheels Technical data Voltage: 400 V – Three-phase Total power: about 5 Kw Dimensions Depth: 1000 mm (+ 300 mm above the door) Width: 1670 mm Height: 2260 mm (+ 400 mm humidity extractors)

Condition: used, functionality: fully functional, overall weight: 5,000 kg, plate width: 1,200 mm, plate length: 1,200 mm, Equipment: type plate available, AMF Zero Point System – Clamping System with Zero Point Clamping Plates, Consoles, Hydraulic Unit, and Accessories Manufacturer: AMF System: Zero Point System Year of Manufacture (Components): Primarily 2013 / 2014 Offered is a comprehensive AMF Zero Point clamping system from industrial use. The system consists of several hydraulic zero point clamping plates, zero point clamping consoles, round changeover and clamping plates, intermediate flanges, adapter elements, an AMF high-pressure hydraulic unit, and extensive AMF clamping and system accessories. The components come from a cohesive clamping and machining system and are suitable for creating flexible workpiece, fixture, and pallet clamping systems on machine tools and machining centers. Individual sale of the components is possible. The existing system includes, among other things: - 1 × AMF Hydraulic Unit, Part No. 515841 - 1 × Large quantity of AMF K20 Zero Point Clamping Modules and System Accessories - 2 × Hydraulic AMF Zero Point Clamping Plates approx. 1,200 × 1,200 mm - 2 × Sets of AMF Zero Point Clamping Consoles, each with 4 stations and a total of 8 K20 clamping modules each - 1 × Clamping Plate Ø 650 mm / 8 Clamping Slots - 1 × Clamping Plate Ø 650 mm / 16 Clamping Slots - 1 × Clamping Plate Ø 1,000 mm / 8 Clamping Slots - 1 × Intermediate Flange / Changeover Table Ø 800 mm Fodpfjzx Akajx Aatspl - 1 × Semi-circular Clamping Device - Several intermediate and adapter rings - 1 × Large Intermediate Flange / Clamping Device Ø approx. 1,250 mm - Various AMF Clamping Modules, Clamping Studs, Height Elements, Couplings, and Hydraulic Lines - Existing technical documentation Key Technical Data: Hydraulic Unit AMF - Part No.: 515841 - Manufacturer No.: 0113 0469 - Operating Pressure: 40–400 bar - Flow Rate: 2.5 l/min - Supply: 400 V / 50 Hz - Motor Power: 1.1 kW - Separate cable-connected control unit - Hydraulic connections with quick-release couplings AMF Zero Point Stations 1,200 × 1,200 mm - Hydraulic actuation - K20 Zero Point Clamping Modules - Operating Pressure: 50–60 bar - Dimensions: approx. 1,200 × 1,200 mm - Weight: approx. 423–424 kg per plate - Years of Manufacture: 2013 / 2014 AMF Zero Point Clamping Consoles - 4 stations per set - 2 K20 clamping modules per station - A total of 8 K20 clamping modules per set - Hydraulic actuation - Operating Pressure: 50–60 bar - Console Height: approx. 143 mm Changeover and Clamping Plates Various designs with: - Ø 650 mm - Ø 800 mm - Ø 1,000 mm - Ø approx. 1,250 mm - Radial T-slots - AMF Zero Point Clamping Modules - Underside clamping studs - Various adapter and mounting options Condition: Used, industrial condition. The components show the usual signs of wear, clamping, mounting, and storage. Some dirt, discoloration, and minor superficial corrosion marks are present. Some of the AMF system accessories are still in their original packaging or appear to be unused. A current functional, leak, or accuracy test of the hydraulic and pneumatic components has not been performed. Sale in the existing condition and scope of delivery as shown in the images. Inspection is possible by appointment. Individual sale is expressly possible.