Used Emmegi Sca Mini 400P + Fermo Vis for sale (5,230)

Year of construction: 2014, condition: like new (used), functionality: fully functional, SCA Mini 400P with a 400 mm saw blade Single-head saw with a saw blade that moves from below and can be swiveled. The feed side is on the left for making miters from 15° to the left up to 15° to the right, as well as intermediate miters. + Fermo VIS 3780 DX stop/measuring system with digital display Profile support and length stop, adjustable via handwheel with readings on a digital display. + Dedpfx Asz H Ni Asp Djku 4-meter roller conveyor

Condition: used, Year of construction: 2018, saw blade diameter 550 mm weight ca. 650 kg Under-table saw for aluminum and PVC Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard Dsdpfszvhm Uox Ap Deku very good condition! The saw was rarely used; it served as a backup machine

Year of construction: 1992, condition: used, Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spray device Pneumatic material clamps Dkodpfxsw Tbkis Ap Dsu Miter cuts possible on both sides 2-Hand-Bedienung

Condition: used, Year of construction: 2001, saw-blade dia. 400 mm Saw blade mounting hole 32 mm Dkodpez Eux Tjfx Ap Dou Saw blade motor performance 1,5 kW Saw blade motor speed 2.800 1/min cutting speed 59 m/s operating pressure 6÷7 bar Dimensions (LxWxH) 920 x 1.060 x 1.450 mm weight approx. 214 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 1997, condition: used, Saw blade diameter: 450 mm Hydropneumatic saw blade feed via 2 hand controls Pneumatic material clamps Minimum quantity spray device Table can be rotated on both sides with locking points at 45° Weight: approx. 650 kg Max. Saw blade diameter: 450 mm mass: about 700 kg Djdpohxzlbofx Ap Doku

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm Dkjdpfx Apsucpqtj Dju

Condition: ready for operation (used), For aluminum, cutting length 6000mm Saw blade diameter maximum 450mm Dkjdpowvqt Hjfx Ap Dju Swivel range: 90°- 45° pneumatic With hydropneumatic saw feed Horizontal workpiece clamping Vertical workpiece clamping Fixed unit on the left, the right unit is movable Digital positioning control Roller track moving with the right saw unit

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: C124207, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,700 kg, Equipment: CE marking, BAZ: Dkjdjz Iyb Ejpfx Ap Dju Emmegi BAZ Centro Di Lavoro Phantomatic M3 (C124207), manufactured in 2020 Technical data: Weight 1,700 kg, compressed air 6–8 bar, 6.5 kW, 10 A, 400/3 V, 50 Hz. BAZ with screen/control unit. 3+1-axis machining center for aluminum, PVC, and steel profiles. 2 clamps. Location: Nuremberg/Krottenbach Inspection/test run: by appointment VAT: shown separately

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: A5766, Fully automatic adjustment and positioning of the machine according to the stored profiles. Operating principle: pneumatic Nominal pneumatic operating pressure: 7 bar / Maximum: 10 bar Maximum profile height: 200 mm Pressing force: 3500 kgp = 34.3 kN Punching stroke: 10.5 mm Counter-pressure stroke: 120 mm Punching height: Max. 140 mm Lateral adjustment: 40 mm Dsdpezy Adisfx Ap Doku Average processing time: Approx. 60 seconds/frame Operating manual and CE marking: Available Dimensions (width x depth x height): 1050 x 1150 x 1450 mm Weight: 450 kg

Condition: used, Year of construction: 2014, functionality: fully functional, We offer this used Emmegi PRECISION TS2 TU/5, manufactured in 2014. It features a functional touch screen. Dksdpfxjz Ikdks Ap Dsu Includes Emmegi Aspiratore MG4 dust extraction system. Weight: 1830 kg Operating pressure: 6-7 bar Speed: 2820 1/min Power: 7.5 kW Current: 16 A Voltage: 400 V Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Band saw welder Viscat model FW400 Dodpfx Aewup U Tsp Dsku

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: C111707, Reconditioned Production Ready！ Ref No: 1026 Emmegi Comet T5 Work centre CNC with 3 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. It has two functioning methods: only one work area for bars up to 7.7 m long or two independent work areas with piece Dedpfx Apozlat So Dsku load/unload while machine is working. It has an 8 place tools storage on board the X axis slide, able to host 2 angular units and one milling disc, to perform work on the 5 sides of the piece. It also has a mobile work surface that facilitates the piece loading/unloading operation and significantly increases the workable section.

Year of construction: 1997, condition: reconditioned (used), functionality: fully functional, Automatic stop system for precise profile cuts with a length of 4200 mm Motor-driven stop with electronic length measurement Robust steel construction with PVC-coated rollers Control via console with automatic repositioning Dksdpez H I D Ssfx Ap Dou The Microbo stop system enables precise and automated profile length measurement during sawing/punching/etc. The electrically operated slide moves on a ball bearing guide and is positioned via a numerically controlled system; the measurement is performed precisely from the center of the saw blade. PVC-coated rollers protect the profile surface and facilitate smooth sliding. All functions can be conveniently operated via the control console.

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: C107230, We are offering a well-maintained Emmegi PHANTOMATIC T3 A CNC machining center, ideal for processing aluminum and light alloy profiles. Machine Details: Manufacturer: Emmegi S.p.A. (Italy) Model: PHANTOMATIC T3 A Year: 2009 Serial Number: C107230 Power: 7.5 kW Voltage: 400 V / 3-phase Current: 16 A Frequency: 50 Hz Weight: 1950 kg Emmegi T3 A specifications: X 4300 / Y 270 / Z 300 mm, 5.5 kW spindle, 4-tool standard magazine (8 optional), 4 standard clamps and machining length up to 4000 mm Dkjdpfx Asy Idm Rop Dju Description: The PHANTOMATIC T3 A is a versatile CNC machining center designed for milling, drilling, tapping, and cutting operations on aluminum profiles. Known for its reliability and precision, this machine is suitable for window, door, and façade production, as well as general aluminum fabrication.2Emmegi

Year of construction: 2011, condition: used, Used EMMEGI TRIMMER E CNC edge trimming machine for sale, manufactured by Fratelli Rinaldi S.r.l., designed for the automatic cleaning of welded corners on PVC frames and sashes. The machine features numerical control via an industrial PC, monitor, and keyboard, with the ability to recall different machining programs depending on the profile to be cleaned. The TRIMMER E model performs the machining process using 3 interpolated axes and an automatic cycle. The 300 mm diameter blade allows for the cleaning of the external corner of different profiles. The machine also features upper and lower units for the removal of weld beads and the machining of internal and external corners. Key features: manufacturer: Fratelli Rinaldi S.r.l. / Emmegi; model: TRIMMER E; year of manufacture: 2011; CNC machine for cleaning the corners of PVC profiles; automatic machining cycle; control via industrial PC; 3 interpolated axes; cleaning blade diameter 300 mm; upper and lower machining units; programming of different profiles; pneumatic clamping of the frame; protected machining cabin; CE marking. Djdpfszmhq Usx Ap Doku Used machine, available at our facility in Termini Imerese (PA), Italy. Inspection and testing possible by appointment. Additional photographs, technical information, and operating videos are available upon request. Availability: immediate.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps Dedpfx Apjz Ady De Deku - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 7,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, Classic Magic 500 TU6 - Double mitre saw with program/positioning control - Electrically adjustable saw head, speed = 20 m/min. - Saw blade diameter 500 mm - Saw blade bore 32 mm - Max. cutting length 4,200 mm; automatic cutting up to 10,000 mm possible in oversized cutting mode - Min. cutting length at 90° = 225 mm - Horizontal pivoting of the saw heads - Mitre range from 90° to 22.5° (outward) Djdpez Adxtjfx Ap Djku - Saw heads with automatically controlled full safety guards - Profile support roller conveyor (right) - Pneumatic material/workpiece clamping The machine includes the following accessories: - Cleverbridge for data transfer via USB or RJ45 - Long roller conveyor - Additional tensioner on the roller conveyor - Horizontal + vertical tensioners - Macro function (ideal for mosquito screen manufacturers) - Oversized cutting - Shortcut - Cross-cutting - Automatic cutting - Automatically extending profile support

Condition: used, Year of construction: 1999, total length: 7,200 mm, total width: 1,100 mm, total height: 1,700 mm, Colour: Grey Weight: 750 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 251855 - Main motor power [kW]: 2.2 - Max. cutting length [mm]: 6000 - Max. cutting depth [mm]: 160 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 400 - Arbor saw blade diameter [mm]: 30 - Spindle speed: Manual - Min. spindle speed [rpm]: 2800 - Max. spindle speed [rpm]: 2800 - Voltage [V]: 400 - Current consumption [A]: 11.2 - Fuse [A]: 16 - Power [kW]: 4.5 - Transport dimensions: 7200mm x 1100mm x 1700mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Djdpfxezwl Avs Ap Doku Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2022, operating hours: 1,700 h, condition: excellent (used), functionality: fully functional, cutting length (max.): 6,500 mm, machine/vehicle number: C127713, Twin head cutting-off machine, for cutting aluminium and PVC bars in various thickness and angles. Dedpfx Apozb I N Is Djku

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: C116353, Equipment: CE marking, Reconditioned Production Ready！ Ref Code:1014 Emmegi Classic Magic Dedpjy U Tczjfx Ap Deku Electronic double‑head cutting‑off machine Twin‑head saw for aluminium and PVC profiles, with NC‑controlled DC motor driving automatic mobile head movement. All angles pneumatically settable down to 22°30’ external. Key Features Blade: Ø 450 / 500 mm cemented carbide blades Cutting length: 5 m useful cut Angle range: 90° to 22°30’ external (pneumatic tilt) Positioning: Magnetic strip direct measuring system Control: Alphanumeric fluorescent display (2 × 40 chars) Memory: 99 profile corrective values (auto angle calculation) 20 cutting lists (50 rows each) via keyboard 10 cutting lists (100 rows each) via USB (PC) Connectivity: USB port, RJ45 network card; label printer ready Clamping: Horizontal/vertical pneumatic vices with low‑pressure device Safety: Pneumatic full protective hoods for cutting zones Lubrication: Water spray‑mist (oil emulsion or minimal quantity oil) Technical Specifications Motors: 2 × 2.2 kW (400 V); total 5.3 kW Blade speed: 2,800 rpm Operating pressure: 6–8 bar; air consumption 15 NL/cycle Dimensions (5 m version): 9,400 × 1,080 × 1,840 mm (L×D×H) Weight: Approx. 1,500 kg Applications High‑precision cutting of aluminium / PVC profiles for windows, doors, curtain walls, and light alloy processing.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Electronic control of the X-axis X-axis positioning speed (m/min) 25 Detection of the moving head position using a direct measurement system with an absolute magnetic strip Mechanical adjustment of intermediate angles; maximum external inclination 22°30' Oil-pneumatic blade feed Useful cutting length (mm) 4,000 Blade diameter (mm) 550 Blade motor power (kW) 2.2 Dkedpszr E S Tjfx Ap Dju

Condition: good (used), Year of construction: 2010, functionality: fully functional, Phantomatic T3A incl. swivel device for angled head Machine features: - CamPlus - Barcode reader - Touchscreen - Overlength function up to 8000 mm - 6-sided machining - Swivel device for angled head - Angled head Travel range X-axis (longitudinal axis): 4300 mm Travel range Y-axis (transverse axis): 270 mm Travel range Z-axis (vertical axis): 300 mm Electric spindle 1 HSD – max. 18,000 rpm – power 5.5 kW Tool magazine capacity: 9 Angular gearbox for side machining, rotatable Number of clamping devices: 4 incl. automatic positioning of the clamping devices Dedoz Adx Hjpfx Ap Djku Weight: 1,950 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, nominal power (apparent): 7 kVA, Number of controlled axes: 5 X-axis travel (longitudinal): 6650 mm Y-axis travel (transverse): 800 mm Z-axis travel (vertical): 525 mm B-axis rotation (vertical-horizontal): 0° to 90°, continuous C-axis rotation (perpendicular to the work plane): 0° to 360° Dkjdpfx Apozz Stvo Dou Electric spindle power at 24,000 rpm: 7 kW Number of independent work areas: 2 Tool holder taper: HSK-E 40 Tool magazine capacity: 9 + 1 Maximum dimensions of disc cutter: diameter/thickness: 300 / 5 mm Automatic positioning of vices

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 242724, Automatic miter cutting Overlength cutting Dksdpfjzqu Egsx Ap Dsu Saw blades 500mm etc.

Condition: like new (used), functionality: unexamined, Industrial Air-Cooled Mining Infrastructure – Available as a Package or Individually An opportunity to acquire 8 used steel data-center containers designed for high-density computing and cryptocurrency / Bitcoin mining applications. The units have previously been configured for mining computers and provide a ready-made physical infrastructure that can potentially be recommissioned for cryptocurrency mining, high-density computing, or other suitable data-processing applications. EQUIPMENT Quantity: 8 containers Type: Data center / cryptocurrency mining containers Reference: Digital Shovel Mini-Pod M300 8 Datacenter container Construction: Steel Cooling: High-volume air cooling Approximate dimensions per unit: • Width: 2.24 m • Main container depth: 2.44 m • Filter section: approximately 1.20 m additional depth • Height: 2.56 m COOLING & INFRASTRUCTURE The containers are designed around a straightforward high-volume air-cooling system. Cooling air is drawn through large filtration sections and exhausted to the outside with large fans. The mining computers themselves have are not included in the package. However, electrical wiring and connectors for connecting computing equipment are in the containers. This gives a buyer an existing infrastructure platform that can be adapted according to the requirements of the intended installation. Dksdpfxsz Dxcmo Ap Dou CONDITION 7 containers are substantially complete. The containers are generally externally tidy, with some minor rust visible around the forklift lifting areas. Some doors between containers are missing as a result of the configuration of the previous installation. During the appraisal inspection, the fan blades were manually checked and found to rotate freely. 1 container is incomplete and is missing its fans and front grille assembly. One container door is also reported as damaged. Please note that no electrical testing of the wiring or fan motors was performed as part of the appraisal, so buyers should carry out their own technical inspection and testing before commissioning the equipment. IMPORTANT INFORMATION These are used units and are offered in their present condition. The appraisal states that production of these particular mining containers has ended. It also reports that Digital Shovel advised that the containers were assembled outside its own factory and that the manufacturer's normal warranty is therefore only available on a limited basis. Prospective purchasers are encouraged to inspect the equipment and independently verify its electrical, mechanical and operational condition before purchase.