Used Engel Engel E-Motion 440/100 T (2009) for sale (1,00,489)

Condition: good (used), Year of construction: 2009, ENGEL Emotion 440/100T Clamping force: 1000 kN Opening stroke: 400 mm Ejector stroke: 130 mm Iijdpsyktp Sefx Alxef Ejector force: 37 kN Screw diameter: 40 mm Max. swept volume: 220 cm³ Screw speed max: 420 rpm Injection rate: 224 cm³/s Specific injection pressure: 2200 bar Nozzle stroke: 305 mm Nozzle contact force: 40 kN

Condition: used, Year of construction: 2015, Operating hours: 39326 Clamping force: approx. 100 t Number of components: 1 Tie bar spacing: Tie-bar-less Horizontal screw diameter: approx. 40 mm Core pull: 0 Hot runner zones: 4 Clamping system: Toggle (KH) Max. stroke: approx. 175.0 mm Iisdezlffyjpfx Alxof Screw speed: approx. 420 rpm Heating zones: 4 Heating power zone 1: approx. 4.23 kW Heating power zone 2: approx. 3.00 kW Heating power zone 3: approx. 3.00 kW Heating power zone 4: approx. 3.00 kW Injection servo: No Measuring system: Incremental encoder Pressure sensor type: Diaphragm Temperature control: J-type thermocouple

Condition: used, Year of construction: 2015, Lot consists of: Iodpfxoy N R N Us Alxjif (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: good (used), Year of construction: 2011, 2011 Engel E-Motion 3440/420 T Injection Moulding Machine Working Hours As Of (17.02.26) 65,000. Clamping Unit e-cap 420. Clamp Force To/ kN 420/4200. Opening Force 420kN. Opening Stroke 700mm. Screw Ø80mm, L/D 25. Mold Height Max. 750mm. Mold Height Min. 350mm. Mould Fixing Platens H1,350 x W1,350mm. Tie Bar Distance H920 x W920mm. Ejector Stroke 220mm. Ejector Force Forward/Return 120kN. Mold Weight, Max On Moving Platen/Centre Of Gravity (Without Additional Guide Block) 6,200/315kg/mm. Dry Operation Time 2.1 at 600sec at imm. E-cap 420 Injection Unit: Weight 36 Ton. Drive Power 147.3kW. Injection Unit Heating Capacity (Max.Capacity/Max Zones). 44.7 kW/6n. Total Power Premium ( When Using Compensation Equipment For Correcting The Power Factor Of Machines, plants Or Plant Components, Reactive Current Compensation With Impedance Capacitors Is Necessary) 193 kW. Connected Current Premium 286A ( With Voltage 3 x 380V - 400V + N + PE, 50/60Hz). Cooling Water Consumption Premium 1,980l/h (With An Ambient Temperature Of Maximum 35°C. S/No. 178804 (2011) Iedszt I Ndepfx Alxoif Weight 12,000kg. Seller Can Assist With Decommissioning If Required.

Condition: like new (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 220 cm³, Technical Data - Clamping Unit Clamping force: 1600 kN Tie bar spacing (h x v): 520 x 520 mm Platen size (h x v): 760 x 760 mm Minimum mould height: 250 mm Maximum mould height: 600 mm Maximum daylight: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Mould weight: 1250 kg Technical Data - Injection Unit Screw diameter: 40 mm Shot volume: 220 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 175 mm Screw speed: 420 rpm Plasticising rate (PS): 33 g/s Free shot weight (PS): 224 g/s Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions (L x W x H): 5.9 m x 1.7 m x 2.2 m Total weight: 8,400 kg Equipment Display language: German Iodpfx Aloyk T I Ujxsif Hydraulic core pull, 1x Core pull unit, hydraulic Machine without material loader Needle shut-off nozzle, pneumatically actuated EUROMAP 63 interface

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Iisdpfx Aloyyz Ddoxef Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric Possible to buy with Viper robot

Condition: excellent (used), Year of construction: 2015, operating hours: 55,201 h, functionality: fully functional, screw diameter: 70 mm, Technical advantages for the machine: - high performance and precision, - fully electric and energy-efficient, - rapid, dynamic, and highly precise movements thanks to a five-point toggle clamping system with low-friction platen guidance on precision linear bearings, - efficient injection unit ensures ultra-fast injection, - complete service documentation and operating manual, - maximum energy efficiency through the consistent use of high-efficiency servo drive technology. Iiodpfxjxfbdxo Alxof

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Iijdoztzqzepfx Alxof

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours and in like-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in like-new condition. Iiodjwb Dl Tepfx Alxjf This is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but has now been released for sale as part of a site relocation. • The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000. The selling price is €78,500 including crane. I can provide you with the technical data upon request, but it is also available in the documents below. Included in the price: Dismantling the crane onto two Euro pallets, as well as removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located near Karlsruhe and can be inspected there. Delivery is possible within a few days. You can find the order confirmation from ENGEL to NYPRO in the documents below!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, The machine comes from a cleanroom production environment and has been operated exclusively with PP material. As a result, the screw is in very good and well-maintained condition. Iisdpfx Ajy A Exdjlxsf TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 30 mm MACHINE DETAILS Weight: 8,400 kg Operating hours: 11,337 h EQUIPMENT Documentation/Manual Comprehensive special equipment

Condition: used, Year of construction: 2020, operating hours: 4,200 h, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request Ijdpjv S H N Rjfx Alxsif terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2020, operating hours: 1,600 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Isdpsv S H Rbofx Alxeif

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, Freight basis: ex-site Isdpfx Aljv S H Rhexsif Delivery time: by arrangement Payment terms: 100% before taking delivery of the machine, net

Condition: excellent (used), ENGEL e-cap 3440/420 T injection molding machine Basic data • Manufacturer: ENGEL • Model: e-cap 3440/420 T Ijdpfx Alszlgi Hsxjif • Year of manufacture: 2012 • Machine type: Fully electric injection molding machine • Control system: ENGEL CC200 • Operating hours: 63,000 h • Screw diameter: 80 mm Technical data Clamping unit • Clamping force: 4,200 kN (420 tons) • Clamping mechanism: Kneel-type, fully electric • Opening stroke: 700 mm • Minimum mold height: 350 mm • Maximum mold height: 750 mm • Mounting plate dimensions: 1350 × 1350 mm • Column spacing: 920 × 920 mm • Ejector stroke: 220 mm • Ejector force: 120 kN • Maximum mold weight: 6200 kg Injection unit • Unit size: 3440 • Screw diameter: 80 mm • Injection volume: 1709 cm³ • Maximum injection pressure: 1950 bar • Number of heating zones: 6 Equipment • ENGEL CC200 control system • Fully electric drives for all axes • Energy-efficient ENGEL e-cap technology • Very high precision and process repeatability • Suitable for continuous 24/7 operation Machine history The machine has been used since new for the production of plastic buckets. It has never been used for the production of PET caps, although the e-cap series was designed specifically for this type of application. The average cycle time was approximately 15 seconds. As a result, the clamping unit has performed significantly fewer operating cycles than typical e-cap machines used for cap production, where the cycle time is usually below 2–4 seconds. This potentially indicates lower mechanical wear compared to machines operated according to their original intended purpose.

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Iisdpfx Aljv Extzjxof

Condition: used, Year of construction: 2021, operating hours: 14,650 h, clamping force: 1,100 kN, displacement volume: 350 cm³, injection pressure: 1,455 bar, overall weight: 60,000 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Iiedjy R Eq Aopfx Alxjf

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Iedpfxjzc Nx Tj Alxjif Tie-bar-less machine with two vertical injection units, with turntable Air valve x 6 Hydraulic core puller x 2 Control unit with hot runners x 12 Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized Engel service in Germany Dimensions Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Price: On request

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Iiodpfx Aszucxcelxof Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine inkl. Roboter SEPRO Hersteller: ENGEL Typ: e-motion 740/180 KL Isdpfx Asx Ddg Telxeif Baujahr: 2007 Schließkraft: 180 Tonnen Holmabstand: HOLMLOS Schnecken DN: 45 mm Max. Hubvolumen: 318 ccm³ Spritzteilgewicht 286 g/PS Steuerung: CC200 Ausstattung: -Roboter, Hersteller SEPRO -2 x Kernzug -Ausblasventil -Schutzzaun -Förderband

Condition: ready for operation (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, injection pressure: 1,441 bar, total length: 7,980 mm, total width: 2,200 mm, total height: 2,570 mm, overall weight: 30,750 kg, Clamping force: 3500 kN Platen size (h x v): 1050 x 980 mm Minimum mould height: 350 mm Maximum platen distance: 1300 mm Opening stroke: 950 mm Iodpfx Aozgt Irjlxeif Screw diameter: 70 mm Shot volume: 1039 ccm Injection pressure: 1441 bar Equipment Screen text in German Hydraulic core pull 2x Machine including conveyor belt Machine including handling unit Machine including safety enclosure Machine without material hopper Leveling elements Handling Data Manufacturer: ENGEL Control: ER-HLI 81 Year of manufacture: 2004 Machine dimensions (LxWxH): 7.98m x 2.22m x 2.57m Total weight: 30750KG

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Clamping unit: Clamping force: 180 t Ijdpfjzc Nz Iox Alxjif Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, overall weight: 7,100 kg, TECHNICAL DETAILS Clamping force: 3,000 kN Screw diameter: 70 mm Shot volume: 1,120 cm³ MACHINE DETAILS Weight: 7,100 kg Operating hours: 17,000 hours EQUIPMENT Iiedpfxow N In Ho Alxef Barrier screw with homogenizing unit and mixing head Cleanroom suitability

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Iiedpfx Alozt I Srexsf Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Isdjzvc N Repfx Alxsif Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Iisdpezt Slpjfx Alxef