Used Erich Appt Banding Machine for sale (65,152)

Condition: good (used), functionality: fully functional, machine/vehicle number: SMA 11.01165, Banding machine Erich Appt Winding diameter: 1,000 mm Itodeyluqtopfx Aizjg 5 units available

Condition: good (used), Banding machine Erich Appt Spools 500 mm ø Ijdpfxjylum Ie Aizstg 1 piece available

Condition: good (used), Year of construction: 2002, Banding machine with two adhesive tapes Reels max. 1,200 mm diameter Itjdoylui Nepfx Aizog 5 units available

Condition: good (used), Busch TB24 I Banding Machine The machine is in very good condition. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 20-25 cycles/min Band dimensions: Length: unlimited Width: Paper – 24 cm Foil – 18 cm Ijdoy Sfa Hopfx Aizotg Height: 15 cm. The machine comes with: spare bands, an instruction manual, and a machine cover.

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Operates on jumbo rolls. Itodpjy Sfayofx Aizjg After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included.

Condition: used, Hebrock K34 Edge thickness up to 8 mm PLC screen control with 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable container and glue dispensing device Edge height max. 60 mm Trimming unit Isdpowtfvkefx Aizetg Milling unit for flush trimming/radius/chamfer milling Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW condition and in TOP condition From a carpentry business closure/retirement Available from carpentry

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. Iedpfxsy Nzltj Aizstg The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg.

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Ideal for wrapping business cards, flyers, calendars, and other materials. Can be used with paper or foil tape. Technical specifications: Tape width: 29 mm Itsdpfx Aiey Nzlmezsg Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Weight: 40 kg. Made in Japan.

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Ijdjy Sk T Eopfx Aizjtg Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 17E000332104800, functionality: fully functional, operating hours: 300 h, 1. AUTOMATIC EDGEBANDING MACHINE Model GTM 4/3 – GRIGGIO The automatic edgebanding machine model GTM 4/3, manufactured by the Italian company GRIGGIO, is a new model launched in 2017, replacing the previous GB 4/3 model. It features a modern concept designed for straight panel edgebanding with PVC and ABS materials. The machine is equipped with the following working units: a) Gluing unit for hot-melt adhesive, featuring rapid heating and a fully Teflon-coated tank for easy cleaning. b) Pressure unit for bonding the edging to the panel – equipped with three rollers: the first is a large-diameter driven roller, while the remaining two are idler rollers with opposing tapers. c) End trimming unit with high-frequency motors designed to trim the overhanging edging flush with the panel at both the front and rear ends at a 90º angle • Installed power: 0.38 kW • Blade speed: 12,000 rpm d) Top & bottom trimming unit with two independent high-frequency motors for removal of excess edging from the top and bottom of the panel • Motor power: 0.55 kW e) Scraper unit for optimal finishing of 2 mm PVC or ABS edge banding applied to the panel edge • Supplied with a pair of knives for use with 2 mm ABS edging f) Buffing unit • Two independent motors for cleaning/polishing the edge banding • Installed power: 0.19 kW • Equipped with 100 mm diameter brushes Maximum panel thickness: 45 mm Minimum panel width: 90 mm Minimum panel length: 200 mm Feed speed: 9.5 m/min Edgebanding overhang (top + bottom): 4 mm (2+2) Pneumatic system pressure: 6 bar Frequency inverter: 200 Hz for motors, enabling 12,000 rpm rotational speed General features: • The machine frame is constructed from a single-piece, high-rigidity steel sheet. Ijdjw Tkl Nepfx Aizjtg • Panel feed system is of the caterpillar type, with skids covered with high-adhesion rubber. • The skids move on dual steel guides – one round and one flat, both hardened and ground, ensuring straight movement and resistance to lateral forces from the working groups. • Upper pressure unit made of aluminum, featuring rubber pressure wheels mounted on bearings, ensures improved linear piece movement. Included spare parts kit (in machine price): - 2 upper rubber pressure rollers - 1 rubber roller for end trimming unit - 2 cotton buffing discs - 5 rubber pads for feed conveyor track - 4 adhesive pot heating elements - 1 temperature probe EXW price: €10,000 (excluded VAT) Manufactured in EU Excellent condition No pre-milling unit Operating hours: 300 h

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Isdpfxsy Rlbns Aizstg Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34. Ijdpfx Aey Nuhnsizjtg

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit Ijdpfxofbr S Rs Aizjtg operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Iedpfxjhy Tlro Aizjtg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine Isdpjc S Di Refx Aizstg SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, ALTENDORF Model F 2 Ijdpfx Aijl D Rp Eszotg Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Ijdpfx Aslc Ewisizetg Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning Isdpfx Aoc Tmygoizotg edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Itsdpow Tfw Hofx Aizsg Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Itjdpfjdynpcsx Aizjg Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. Itsdpfxsudi Une Aizeg The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 Ijdpfx Aou R Sy Asizjtg - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: new, Year of construction: 2025, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, compressed air connection: 6 bar, plate length: 1,200 mm, product height (max.): 3 mm, tank capacity: 3 l, warranty duration: 12 months, DANIBRUM AC CONTUR 2 – Edge Banding Machine for Curved, Round, and Irregular Panels Itjdpowg E Hvofx Aizog The DANIBRUM AC Contur 2 is the ideal solution for precision edge banding on panels with non-standard shapes — from oval, round, and rectangular parts to undefined curved geometries. Its operational flexibility allows edge application on 90° angles as well as open and closed arcs, thanks to an advanced mechanical feed system and adjustable profiling setup. A key advantage of this machine is its high-precision edge trimming, enabled by a laser sensor that perfectly synchronizes the edge tape ends, ensuring flawless joints with a tolerance of just ±0.3 mm. Operation is intuitive through a touch-screen interface that allows fast adjustment of all working parameters. The system features a vacuum-supported mobile arm, extendable up to 2250 mm, providing reliable and stable support for the workpiece during processing. For safe and efficient use, the machine is equipped with a foot pedal control system, while the adjustable feed speed enables edge banding at 0 to 30 cm/s and longitudinal profiling at 0 to 24 cm/s. Optimized for Complex Workpieces This machine is designed to handle: Edge tape thickness: 0.5 – 3 mm Panel thickness: 12 – 60 mm Minimum working radius: 20 mm Compatible with various panel formats: Round pieces up to Ø2400 mm Rectangular panels: 1200 x 2400 mm L-shaped panels: 1400 x 1600 mm Equipped with high-speed longitudinal profiling cutters (24,000 rpm), it guarantees a high-quality finish even on complex contours. The AC Contur series includes multiple models, such as AC Contur 2 and AC Contur 3, the latter featuring two extendable arms for increased productivity. Technical Specifications Edge tape thickness: 0.5 – 3 mm Minimum working radius: 20 mm Panel thickness: 12 – 60 mm Material dimensions: Round: Ø2400 mm Rectangular: 1200 x 2400 mm L-shape: 1400 x 1600 mm Cutter speed (longitudinal profiling): 24,000 rpm Feed speed: Edge banding: 0 – 30 cm/s Profiling: 0 – 24 cm/s Edge tape joint accuracy: ±0.3 mm Compressed air pressure: 0.6 – 0.8 Mpa Working temperature: 110 – 210°C Adhesive tank capacity: 2.6 liters Arm extension length: 2250 mm Installed power: 6.5 kW Power supply: 400 V – 3 Phase – 50 Hz Weight: 430 kg Overall dimensions: 1870 x 1400 x 1530 mm

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) Iedjy Id Nlepfx Aizetg - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: new, Type GB/T10850 Motor power 0.18 kW Air pressure 3-6 bar The power supply voltage 220 V 50 Hz Iedpfx Asd Tymneizstg Total power 1.4 kW Heating power 1.2 kW Edge width 8-50 mm Edge thickness 0,3-3 mm Sealing side speed 0-26 cm/s Vacuum suction of workpiece Transport dimensions Net weight 300 kg