Used Erowa Erowa Precision Holder 25 for sale (27,052)

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle Dwsdpfx Aezd Riusp Doc paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2020, total height: 2,700 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 2,350 kg, product length (max.): 2,100 mm, number of axes: 3, This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. • Max. distance between table and probe holder (without probe): 668 mm • Max. distance between columns at table height: 650 mm • Usable granite slab area: 650 x 1700 mm • Max. loadable workpiece weight: 650 kg Additional equipment • PH10MQ touch probe system with SP25M-2 • FCR25-L6 touch probe changer • ARCO Presoft software Dwedpfx Apex D Hvqj Djc

Condition: used, EROWA UPC clamping system – pallet holder Dedpszpxkdsfx Ap Djwc ER 016093

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, We offer you: Manufacturer: Chiron Type: FZ08 MT Precision+ high speed plus Year of manufacture: 2017 Control system: Fanuc 31i-B5 Dwodjz I U D Uspfx Ap Doc Technical data: Travel ranges: X-axis: 210 mm Y-axis: 200 mm Z-axis: 360 mm B-axis: -10° to +100° C-axis: 360° Main spindle: Speed range – main spindle: max. 54,000 rpm Drive power – main spindle (100/25%): 3.5 / 5.2 kW Torque: max. 2 Nm Turning spindle: Max. bar diameter: 32 mm Speed range: 15 – 8,000 rpm Drive power (100/15%): 9 / 12 kW Torque: max. 14.3 Nm NC 2-axis swiveling unit: Swiveling angle: -60° to +180° NC rotary table diameter: 170 mm Tool changer: Tool holder: HSK-E 32 Number of tool positions: 40 Max. tool diameter: 45 / 100 mm Max. tool length: 200 mm Max. tool weight: 1.2 kg Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.5 sec Feed rates: Rapid traverse (x/y/z): 75 m/min Operating hours: approx. 37,280 h Spindle hours: approx. 11,360 h Please refer to the PDF in the attachment for technical features and accessories. Accessories, tools shown in the images, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Condition: like new (used), functionality: fully functional, How do you do? We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Collet holder ø 72 ER16-ER50 Dwedpfx Ajvby U Ssp Dec Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: refurbished (used), functionality: fully functional, Hello, We are offering rebuilt ER-093996 Square 25 Holder C from Erowa. The holders were converted from the old version ER-010607 without gripper grooves and sealing plate. We completely disassembled, blasted, cleaned, and readjusted them. Dedpowa Sffjfx Ap Djwc Including clamping spigots. You are also welcome to send us your holders for rebuilding or overhaul. We are happy to answer any questions or provide technical assistance.

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction Dsdoz Eq Epspfx Ap Dewc WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2277, turning length: 100 mm, spindle speed (max.): 6,000 rpm, total height: 1,750 mm, total length: 1,800 mm, total width: 1,000 mm, overall weight: 2,100 kg, bar passage: 25 mm, Equipment: documentation/manual, MÜGA GT 2-25 CNC lathe - Number of NC axes: 2 - Maximum swing diameter: 360 mm - Rapid traverse rate: 17.5 m/min - Collet chuck: ISO DIN 163 E - Clamping range: max. 30 mm diameter - Tool holder, square: 16 x 16 mm, round: 20 mm - Spindle power: 5.5 kW - Tool positions: 7, external: 4, internal: 3 - Includes technical documentation and accessories such as a 3-jaw chuck, chuck jaws, and collets - Includes chip conveyor Dwodpfx Apez I Ni Ee Djc FCA D-97711 Maßbach – loaded onto a truck

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Dodpjzfbu Rsfx Ap Dowc Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT Dwsdpfx Aezdkc Uop Dec 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Various Erowa tool holders / tool holders are for sale. All holders are functional and tested by us. Can be purchased individually or as a package 1: ER-020571 2: ER-016841 3: ER-016841 4: ER-016841 5: ER-016841 6: ER-016841 7: ER-016917 Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Dndpw7 Djdpfxotwz N Tj Ap Djwc For further information or contact options, please visit our website

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center Dwsdpfjz Ih A Dex Ap Doc 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0210.07382, turning length: 1,000 mm, turning diameter: 350 mm, spindle speed (max.): 3,000 rpm, chuck outer diameter: 315 mm, The Okuma LB 25 is a used CNC inclined-bed lathe, manufactured in 1988, equipped with an Okuma OSP 5020 control. According to the documentation we have, it can handle workpieces up to 1,000 mm in length and has an integrated Okuma Touch Setter. The machine comes with a chip conveyor and oil mist extraction system. It is located in the Düsseldorf area, along with an Okuma LB 15 from 1987. Dwedpfxez H Ugye Ap Dec TECHNICAL DATA - Year of manufacture: 1988 - Control: Okuma OSP 5020 - Turning length: 1,000 mm - Turning diameter according to documentation: 350 mm (please verify on the nameplate before purchase) - Chuck diameter according to documentation: 315 mm - Spindle speed max.: 3,000 rpm - Measuring device: Okuma Touch Setter (integrated) EQUIPMENT AND ACCESSORIES - Chip conveyor Knoll 320 S-1 with coolant cleaning - Extraction system Filtermist F21/8 - Tool turret with holders (as shown in the photos) - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For shafts and turned parts up to 1 m in length, suitable for maintenance and contract manufacturing. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading, and transport are organized by the buyer. Upon request, we can provide contact information for freight forwarders in the region. Price upon request. Please contact us via the contact form.

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder -Number: 25 pieces turning tools -Take: Ø 30 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/655/H630 mm Dedpfsgl Duhex Ap Dowc -Weight: 34 kg

Condition: refurbished (used), Hello, We are offering rebuilt ER-093996 square 15 holders C from Erowa. The holders were converted from the old version ER-007986 without gripper grooves and sealing plate. We completely disassembled, blasted, cleaned, and readjusted them. Dsdpfxowa I Hrj Ap Dswc You are also welcome to send us your holders for rebuilding or overhaul. We are happy to answer any questions or provide technical assistance.

Condition: ready for operation (used), Year of construction: 1998, Chiron FZ08 S - 5 axis vertical machining center Year: 1998 Dodpez Inikjfx Ap Dowc Technical details: CNC control: FANUC 21i-M Travel ranges: X-axis: 350 mm Y-axis: 250 mm Z-axis: 250 mm A-axis: 360° for corresponding 5-axis/rotary axis models. B-axis / swivel axis: -20° / +110°. Table size / clamping surface: 550 x 300 mm, Tool magazine: 12 tools Spindle mount: HSK-A32 Spindle speed: up to 1500 rpm Spindle motor power: 3.7 kW Machine weight: 1,820 kg Dimensions: 2050 x 2250 x 1900 mm Accessories/options: - 10 pieces tool holders, HSK-A32 - Hoffmann 4/5 axis rotary table - Documentations - Coolant tank - Precision vice Under power in our warehouse, possible to see it anytime!

Condition: like new (used), Year of construction: 2013, Weiler Praktikant VCD Precision Lathe (2013) Manufacturer: Weiler Type: Praktikant VCD Precision Lathe Year of Manufacture: 2013 Condition: used, very good, like new, no signs of wear, including new maintenance and inspection report prior to sale. Distance between centers: 650 mm Swing over bed: 160 mm Swing over cross slide: 320 mm Dwsdpfx Apezza Nro Djc Swing over compound slide: 190 mm Cross slide travel: 150 mm Compound slide travel: 110 mm Compound slide swivel range: +/-65° Bed carriage travel: 350 mm Bed width: 205 mm Tool holder cross-section (height x width): 20 x 20 mm Height from top slide to center line: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in the front bearing: 70 mm Spindle bore: 43 mm Internal taper of the main spindle: Metric 50 Drive power: 6 kW Spindle speed range: 30 - 4000 rpm Number of gear stages: 1 Number of spindle speeds: infinitely variable Number of feeds: 24 Longitudinal: 0.02 - 0.63 mm/rev Cross: 0.006 - 0.2 mm/rev Tailstock diameter: 40 mm Tailstock travel: 85 mm Internal taper of the tailstock: 3 MK Weight, without packaging and accessories: approx. 1150 kg Length / Width / Height, net: 1720x890x1700 mm Headstock / Back wall / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Housing of the display screen: Blue NCSS 4550-R80B.

Condition: used, machine/vehicle number: 516301X00339, Year of construction: 2020, operating hours: 5,917 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,150 mm Load capacity: 2,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex free-lift mast Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Dwjdez Iwqkspfx Ap Dsc Battery year of manufacture: 2020 Battery voltage in idle state: 85.4 V Mast type: Duplex free-lift mast Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Weight: 4,700 kg Service valid until: 05/2027 Safety inspection valid until: 05/2027 Operating hours: 5,917 h EQUIPMENT Former Still full-service unit 3rd and 4th valve Fork positioner Hydraulically adjustable forks Side shifter Semi-cabin Windshield wiper Comfort seat LED work light, front LED work light, rear Orange warning light Safety light, front Safety light, rear If the mast is too high, it can be dismantled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine and day will be charged if collection is not made on time. Outstanding storage fees must be paid in full before collection. Lot number: 159

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck for sale. EROWA ER-026229 UPC chuck UPC collet set, 82/82 mm through-hole (special version) Year of manufacture: 2023 Dwjdpfx Apjzw D E Ne Dsc New price: €9,940 The chuck is in very good condition and fully functional. Inspection possible by appointment. Shipping and inspection are possible!

Condition: good (used), Good day, we offer here used clamping devices from Erowa. These belong to the PalletSet W and are for Wire EDM machining. The following parts are available: Fixed holder ER-030678 Floating holder 3D ER-030923 They have been cleaned and tested by us. In addition, a functional test was carried out. The clamping devices have slight traces of use, and are technically in a very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then we are at your disposal. Dwjdpsp Eb Dvjfx Ap Djc

Year of construction: 2008, condition: used, load capacity: 50 kg, plate length: 2,500 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 2,500 mm Minimum panel width: 195 mm Minimum panel length: 250 mm Lifting capacity: 50 kg Operating performance: 18 cycles/min Maximum stack height from the ground: 1,600 mm MACHINE DETAILS Total installed power: 15 kW CE safety compliance: Yes EQUIPMENT Removal of the panel stack via powered roller conveyor Dwedpfx Apoz Ekcnj Dsc Vacuum pump WINDOWS control The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8347

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Dedpfx Apex Twdys Dswc

Condition: excellent (used), Year of construction: 2011, Robust, Right-Sized Packaging System Automated machine for cardboard packaging, Cardboard cutting machine, Cardboard die-cutter, Cardboard manufacturing machine Packsize EM7-25 MT, year of manufacture 2011 Weight EM7-25: 4,500 lbs EM7-35: 5,500 lbs Footprint with Bales EM7-25: 15' 8" x 10' 2" EM7-35: 15' 8" x 13' 5" Unlimited number of cardboard sizes and styles 15’ 8″ x 13’ 5” Fully-loaded footprint Max. 4 plies of corrugated cardboard in various grammages The EM7-25™ is a patented, automated machine for the “On-Demand Packaging” process, designed for use in a wide range of industries. The EM7-25™ system, developed in Sweden, offers a range of advanced features for cardboard production, including longitudinal and transverse cutting, scoring, perforating, and die-cutting of handles and openings. The machine supports the “Lean Packaging” concept and also enables material feed in the reverse direction (so-called *Back-Feeding*), allowing for an unlimited variety of cardboard designs that are precisely tailored to the respective product dimensions. Djdpfsz Ig E Rox Ap Dswc The EM7-25™ model can be seamlessly integrated into the PackNet.Server® software, which is used for production control and process optimization. This provides those responsible for the packaging process with the necessary tools and analysis data to efficiently coordinate and control both single and series production, as well as highly complex processes in the manufacture of corrugated cardboard packaging. A configurable user interface provides easy access to local reports on machine operation and is controlled via an integrated control panel.

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Dsdjzi Upcepfx Ap Dewc Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: used, functionality: fully functional, Ferwood code: RU0009932 - Manufacturer code: 4-014-12-0207 - Condition: Used - Functionality: Fully operational - Compatible machine: - If interested, we offer an overhaul service. Please contact us. 1KG - 20X20X20 Dedsyk Eduopfx Ap Dowc