Used Eubama S20/10 for sale (30,658)

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Dodow Hglmopfx Aptjkt

Year of construction: 2017, condition: ready for operation (used), A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible. Dodpfxezfp H Ij Aptskt

Condition: used, Year of construction: 2012, Engel ES4550/750K-V (2000) Injection Moulding Machine – Technical Data • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) • Screw speed: 140 rpm • Heating power: 67 kW • Number of heating zones (incl. nozzle): 7 Clamping Unit • Clamping force: 7500 kN Dksdoy I Anmjpfx Aptst • Holding force: 8250 kN • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45069, overall weight: 32,000 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Dedpfx Apszrd U Hetokt The machine has not been inspected but was in working order until the end.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5031183-000 104, input frequency: 50 Hz, input voltage: 400 V, power: 3 kW (4.08 HP), - Briquetting press with a storage container for compressing textile fibers of various material qualities - Our area of application: textile scraps (dust) from the tearing process - Also suitable for compressing wood scraps - The system was in operation from 2015 to 2020 Technical data: - Briquetting press with a 3kW hydraulic drive - 1400 RPM - 400V, 50 Hz - Briquetting output, depending on the type of chips and moisture content, 80 - 100 kg/h - Complete with 125 liters of hydraulic oil – including oil cooler and base - Transport lines + supports - Pusher plate SB1 with discharge screw, hydraulics, and electrical control, size 2000 x 2000 mm - Screw motor: 1.5 kW, 34.9 RPM - Hydraulic unit: 0.55 kW - Accessories CE: EC Declaration of Conformity according to Machinery Directive 2006/42/EC Dodpfx Aszcnvksptokt Note: The system is located in Ulm and can only be inspected there.

Condition: good (used), Year of construction: 2002, The EUBAMA S6 is a 2002 model bench-type machine. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 330 mm Dkjdpsv Ef N Aofx Aptst Maximum output (cycles/minute): 40 Hydraulic clamping system Machine control: CNC Siemens SINUMERIK Number of processing units: 15 FMB MT/42/4200/B driver magazine Magazine loading capacity: 4.2 meters KNOLL chip conveyor KNOLL coolant tank (VRF 250/1250) The machine is in working condition.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 234S, total length: 2,400 mm, total width: 800 mm, total height: 1,255 mm, overall weight: 330 kg, input voltage: 400 V, type of input current: three-phase, power: 2.5 kW (3.40 HP), year of last overhaul: 2025, input frequency: 50 Hz, conveyor belt width: 200 mm, CRM NEXUS 200/1100 chop cutter for whole loins (section 195 x 200 x 1000 mm) 2011 machine, fully overhauled and refurbished in October 2025 Up to 170 slices per minute Cuts with bone Machine in perfect condition Equipped with a cover over the buttons for cleaning Dodexwdmyjpfx Aptskt

Condition: excellent (used), Loos, capacity 2000 kg/h, 10 bar. Year of manufacture 1990. In excellent condition. Djdpolp Dpasfx Aptjkt

Condition: new, sheet width 2100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm lower roll diameter 210 mm side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel Dkodpjyv I Ubjfx Aptot - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009703, functionality: fully functional, Completely overhauled, delivery time 3-4 weeks Chamber oven for solvent-containing materials, compliant with DIN 1539 - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm - Max. temperature: 250°C - Controller: JUMO Imago 500 - Approved solvent quantity at max. temperature: 250 g / 46 g - Exhaust air flow rate: 6 m³/min - Additional equipment: 1 feedthrough, e.g. for thermocouples 3 heavy-duty grid shelves - Connection power: 26 kW - Weight: 1250 kg - Includes documentation, CE declaration - Current DGUV test report Dksdpfx Ajzy Ihgeptet Inspection in our warehouse by appointment. Oven, industrial oven, convection oven, chamber convection oven, annealing oven, heating oven, drying oven, tempering oven, paint drying oven, solvent oven.

Condition: good (used), Year of construction: 2004, functionality: fully functional, GLASS FLAT GRINDING MACHINE Djdpozgvl Hefx Aptskt

Condition: used, Year of construction: 2021, operating hours: 370 h, * Roll-over protection structure (ROPS) * 2 vibratory rollers * Irrigation system ----Vehicle number 12417 -----Errors and prior sale excepted Dedpfxszv Df He Aptskt

Condition: used, Installation of power converter for switching and rectification The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Dkjdpjzdu S Tofx Aptst possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Dkodpszy Spzsfx Aptot

Condition: used, Year of construction: 2015, Complete extraction system, with briquetting press Consisting of: Chip container approx. 10 m³ Filter unit approx. 140 m² Fan, frequency-controlled, 15 kW Container discharge Briquetting press 60 to 90 kg/h Recirculation air components Control systems complete Pipe components complete for the system Spänex extraction system: completely disassembled, ready for transport from a public sector facility Components complete for the system Fire alarm Baffle silencer 1200 x 900 2 channel bends 90° 600 x 600 Transition 90° 600 x 600 to 1200 x 600 Transition outlet 550 / 320 x 350 Connection vent 320 x 350 / 1200 x 900 Perforated recirculation air pipes for air distribution D 630 mm: 3 x 1500 mm 1 x 1400 mm 1 x 1300 mm 2 bends 450 mm 90 r=300 mm 3 bends 450 mm 90 tight r=200 mm 5 pipes 4450 mm 1.0 m 1 bend 560 mm 90° 2 pipes 560 mm 1.0 m in top condition low operating hours Dkodpjzy Sfiofx Aptst Manufacturer: Spänex extraction system / IPE press Year of manufacture: 2015 press, system 1996 GS-tested CE-type tested Afterfilter Suction/blowing nozzle mm: 400 Suction nozzle mm: collecting duct Casing Fire hose motorized shaking with discharge gear Air recirculation Number of filter hoses: 215 Filter hose length mm: 1050 Filter hose diameter mm: 200 Filter category: BIA-tested Cat G/C Fan kW: negative pressure, high-performance fan, frequency-controlled, 15 kW, 1996, 10670 m³/h at 2500 pa Fan diameter: 400 Fan Pa: 2500 Length mm: 4500 Width mm: 3000 Height mm: 3200 Briquetting press: used in top condition low operating hours Manufacturer: IPE Type: ECOpress 90/10 Year of manufacture: 2015 Machine no.: 016615 GS-tested CE-type tested Motor kW: 7.5 Press output kg/h approx. material-dependent: 60 - 90 Briquet diameter mm approx.: 60 Filling cylinder Screw feed Location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee and warranty

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Dodjzycraspfx Aptjkt

Condition: new, - NEW -The model for more comfort. The edge sanding machineRS 2010 with its versatile equipment offers edge grindinga complete processing for the carpentry quick changeover from freehand sanding to veneer sanding,the band oscillation and the stepless swiveling of theGrinding aggregates allow universal support table, which is pneumatically adjustable in height, and thepneumatic belt tensioning ensure easy hnical Equipment:- Pneumatically height-adjustable work table- Infinitely swiveling sanding unit up to 45 °- easy conversion to veneer edge grinding- pneumatic belt tension- Display 0 - 45 ° for the sanding unit- stable support table on the pulley- feed bracket- Angle and miter fence- Veneer grinding device- Table on the deflection roller adjustable by spring pressure- stepless aggregate donation 90-135° via hand wheel- oscillationTechnical specifications:Motor power: 3 kWBelt speed: 22 m / sBand length: 2760 mmBand width: 200 mmTable size: 450 x 920 mmRequired space: 1200 x 2000 mmExtraction: 120 &amp, 80 mmTotal weight: approx. 320 kgStorage location: 97447 Gerolzhofen- free loaded- Dkjdpovwf Hxjfx Aptjt

Condition: used, Year of construction: 2010, machine/vehicle number: 1008801, The machine is designed for electro-resistance spot welding of gabion mesh panels. It can also be used for welding a new type of mesh; in this case, the welding points are reprogrammed. Wire diameter: 3-6mm Maximum mesh dimensions: approx. 2x2 m Operation of the welding machine is semi-automated. Wires are manually inserted on one side of the machine. After automatic welding, the finished mesh is manually removed, and new wires are inserted. Dksdpfxezy Eq Ss Aptjt Power supply: 400 V AC Machine dimensions: approx. 10.5 x 3 m Location: In our workshop

Condition: excellent (used), Year of construction: 1995, High-performance rotary transfer machine, specifically designed for the mass production of medium and large-sized parts. Thanks to reduced production times, high precision, and reliability, it contributes to greater efficiency in the mechanical machining sector: it can perform up to 15 machining operations, transverse machining operations, or front-side machining operations on both sides. Dkjdjznnpmopfx Aptet

Condition: used, machine/vehicle number: 008729, Type of edging: Thin edge, Thick edge Dedpfxozylv Ie Aptjkt Gluing System: EVA Hotmelt Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz Dksdpfxezy Dzie Aptst - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table, and additional automation Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control system: BABYPLAST - Touchscreen Additional equipment: Production line with robot, rotary table, and additional automation Vertical injection molding machine Dksdpszy H Rgefx Aptst Air valves Injection for mold separation Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor, which is controlled via an inverter – very precise Automatic parts feeding with quality control system Machine work area protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70 x 1.00 x 1.65 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Dkodpfxow H I R Ro Aptst Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Desiccant air dryer Manufacturer: Motan Type: ADC 200/10/20 Connection value: 5.6 kW Dry air volume: 200 m3/h Dkedsyvfibspfx Aptet 5 material silos Manufacturer: Motan Type: BC-30 Ltr. Additional heating: 1.55 kW 5 material conveying units Manufacturer: Motan Type: HLS-06-1-A000-0 PRICE REDUCTION FROM 5500 TO 5000 EUR!!!

Year of construction: 2024, condition: used, Applications and use: The separator is best suited when a light excavator needs to handle heavy, stubborn materials. It is derived from the wider TSC.154 and features the same drive and bearing assembly, resulting in increased power output on a smaller screening surface. The built-in star discs are 5 mm thicker than the standard discs and are additionally fitted with welded-on wear protection. The disc separation gap is 20 mm, resulting in a screened particle size of 0-25/30 mm, ideal for producing backfill material. Price does not include the mounting plate. Dkjdpfjw Rkxqsx Aptst Adapters for excavators can also be custom fabricated and supplied upon request. Price on request. For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 30 - 45 m³/hr Leak oil connection required: no