Used Evv Sv-63P for sale (877)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Nodpfxjyqr Sxj Akfswf

Condition: excellent (used), I am offering a vacuum pump from the reputable brand BUSCH, model SV 1025 B. Nodpfsyxgc Ajx Akfowf The device is fully functional – tested and ready for operation. Technical data: • Model: SV 1025 B • Manufacturer: BUSCH • Country of manufacture: Switzerland • Ultimate pressure: 120 mbar • Type: vacuum pump for air and gases Applications: • vacuum installations • vacuum packaging • industry • production machinery Condition: The item is used, shows normal signs of use, and is in good technical condition. Fully operational. Included in the set: • BUSCH SV 1025 B pump • visible installation/connection

Condition: good (used), 10 secondhand bins available. Nsdeq Ih H Espfx Akfswf Currently 760 new bins available.

Condition: used, functionality: fully functional, total length: 1,750 mm, total width: 2,600 mm, total height: 2,150 mm, overall weight: 1,280 kg, tank capacity: 2,800 l, The Dorit VV-6-1401 Vacuum Churn is designed to improve the quality of meat products by facilitating the marinating and tenderizing process. Made of stainless steel, it ensures durability and hygiene, while allowing for simplified front loading and unloading. Thanks to its automatic discharge system, the front-to-rear transition is seamless, optimizing production efficiency. The machine offers advanced features such as a programmable timer to manage processing times and settings for speed, program, and vacuum. Built-in gauges monitor vacuum and operating status, ensuring consistent results. This churn is ideal for meat marinating operations, allowing for even absorption of salts and marinades, while increasing production capacity thanks to its varied programs. Dorit Vacuum Meat Tumbler Stainless steel construction Front loading and unloading Automatic unloading when switching from front to rear Programmable interval timer for controlling total time, massage, and rest interval Setting switch for speed, program, and vacuum Gauges for vacuum and operating status Voltage: 400 V three-phase Nedpfxju E Ip Ao Akfswf Frequency: 50 Hz Drum volume: 2800 L / Maximum capacity: 1400 kg Dimensions (d x w x h): 1750 x 2600 x 2150 mm Net weight: 1280 kg rjmpaoh5

Condition: excellent (used), functionality: fully functional, total width: 1,315 mm, total height: 1,410 mm, total length: 2,030 mm, briquette diameter: 40 mm, oil tank capacity: 100 l, screw conveyor length: 1,595 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, filling opening width: 1,044 mm, Machine fully working , in very good condition.If you need any details please let us know. Njdpsx I Abasfx Akfswf

Condition: used, Year of construction: 2003, 40 mm bore capacity in cast iron 46 mm 50 mm M 30 M36 MK 4 throat 300 mm 615x430 mm 200-3000 U/min. 2x14x224 mm Distance spindle/table max. 147/688 mm column diameter 145 mm spindle stroke 160 mm feeds 0,1-0,4 mm/U height of the machine 1885 mm drive motor 1,8/2,9 kW Nwsdpey Ehx Sefx Akfsf weight of the machine ca. 500 kg

Year of construction: 2008, condition: excellent (used), machine/vehicle number: C0851000161, Equipment / Additional information: Ultimate pressure: 150 hPa(mbar) Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Nwjdpjh Eu Sfsfx Akfef

Condition: good (used), Year of construction: 2002, The machine is in good condition, equipped with Fanuc Series 16i-T control and FMB Turbo 5-42 bar feeder. Nwjdpfx Akjy Eb N Dofef

Condition: not inspected (used), Year of construction: 1987, machine/vehicle number: 5755, functionality: unexamined, drilling depth: 120 mm, rotational speed (max.): 1,125 rpm, rotational speed (min.): 160 rpm, table width: 300 mm, table length: 300 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Speed range: 160 – 1,125 rpm Drilling depth: up to 120 mm Table dimensions: 300 x 300 mm MACHINE DETAILS Nedpfx Aoy D Sydskfswf Dimensions & Weight Dimensions (L x W x H): 1,000 x 500 x 1,800 mm Machine weight: 250 kg FEATURES Vice External reference: 18

Condition: good (used), Year of construction: 2009, lifting height: 6,100 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.810 kg Functional Lifting capacity: 360 kg Working height: 810 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,21x0,71x1,72 Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SV06CNL Year of build: 2009 Condition: Used Data: Max. working height: 8,10 m Max. platform height: 6,10 m Drive type: Battery Platform dimensions LxW: 2,21 x 0,71 m Njdpfev Tib Sex Akfowf Length of the platform extension: 1,00 m Lifting capacity: 360 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 2,30 x 0,80 m Height transport position with railing: 2,125 m Height transport position without railing: 1,715 m Max. Wheel load: 800 kg Gradeability: 25% Max. permissible longitudinal tilt angle: 3° Max. permissible cross slope angle: 1,5° Empty weight: 1.810 kg Special features: weiße Reifen, Anschlagpunkte für Rückhaltsysteme(PSA) vorhanden, nur Inneneinsatz Information: 3057 + 3058 Electrical problem, 3078 Emergency stop contactor missing. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2012, lifting height: 12,100 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.810 kg Functional Lifting capacity: 360 kg Nedpov Tibrofx Akfewf Working height: 810 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,3x0,8x1,71 Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SV06CNL Year of build: 2012 Condition: Used Data: Max. working height: 8,10 m Max. platform height: 6,10 m Drive type: Battery Platform dimensions LxW: 2,21 x 0,71 m Length of the platform extension: 1,00 m Lifting capacity: 360 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 2,30 x 0,80 m Height transport position with railing: 2,125 m Height transport position without railing: 1,715 m Max. Wheel load: 800 kg Max. climbing capacity: 25% Max. permissible longitudinal tilt angle: 3° Max. permissible cross slope angle: 1,5° Own weight: 1.810 kg Special features: white tires, attachment points for restraint systems (PSA) available, only for indoor use Information: Suitable transport trailer upon request for an additional charge of €2,999 Information: 3061 Charger missing, error message present, driving, steering, lifting without function. Location: 41468 Neuss immediately available

Condition: good (used), machine/vehicle number: WMA18SZZ8GM685543, mileage: 1,95,000 km, power: 265 kW (360.30 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, differential lock, electric window regulation, power mirror, Technical information Engine capacity: 10.518 cc GVW: 19.120 kg Drivetrain Make of engine: MAN Axle configuration Front axle: Tyre size: 385/65R22.5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70R22.5; Suspension: air suspension Rear axle 2: Tyre size: 315/70R22.5; Suspension: air suspension Nwjdpfsyt A Txox Akfsf Interior Steering wheel placement: Left Condition Technical condition: good Visual appearance: good Other information Vehicle's outer dimensions: 10,15x2,54x4 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Cabin suspension - mechanical - Differential lock - Driver seat air-cushioned - Heated mirrors - PTO - Stereo = Remarks = The BLG road cleaner is suitable for use in emergencies and for performing preventive maintenance on specific road surfaces where a standard sweeper is not powerful enough. In Europe, for example, many roads are covered with ZOAB or other types of open concrete surfaces. Due to the open structure of these surfaces, dirt accumulates in the cavities. Other cleaning methods, such as sweeping or brushing, only “push” this dirt deeper into the cavities. This results in a very slippery road surface, especially in changing weather conditions. Because our road surface cleaner sprays the dirt loose under high pressure using dirt cutters and sucks everything up with the powerful fan, the draining effect of the road surface is maintained. This also makes the vehicle very suitable for effectively cleaning up oil and other serious contaminants such as paint. The advantages of the BLG road cleaner 2.5 m wide suction nozzle with two suction hoses Very powerful fan with a capacity of 20,000 m3/hour Hydrostatic drive for optimum ease of use Autonomous thanks to the use of water recycling The suction nozzles can be tilted independently Equipped with a coarse debris filter Pump section equipped with sound insulation Equipped with brush-in system and HD system For very intensive road cleaning, we have developed a powerful road cleaner that cleans using high-pressure and vacuum technology. With a water supply of approx. 9 m³ and the use of water recycling, it offers a very high degree of autonomy. The combined clean and dirty water tank is made of 4 mm thick stainless steel. The dirty tank is emptied via the rear cover, which is also made of stainless steel and opens upwards by means of two cylinders. The BekkerLaGram road cleaner can be found on industrial sites, motorways, airports, factory sites and much more.

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Rotor knives: 3 Stator knives: 2 Njdpfx Ajyr Tzkekfowf Infeed opening approx.: 410×600 mm Drive motor: approx. 11 kW

Condition: used, Year of construction: 1998, x-travel 1.020 mm y-travel 510 mm z-travel 510 mm control MSC 501 Fanuc table surface area (APC) 1.200 x 480 mm max. table load (APC) 550 kg turning speed range - milling 10.000 U/min power capacity - milling spindle 22 / 18,5 kW tool taper BT 40 number of toolpositions 30 pos. tool taper BT 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg Nwsdpfx Aksy Apcyjfef rapid traverse 32 m/min feed 1 ~ 16.000 mm/min Tipp feed 0 ~ 1.260 mm/min spindle bearing diameter 85 mm total power requirement 59,5 kVA weight of the machine ca. 6,9 t dimensions of the machine ca. 3,9 x 2,7 x 2,9 m CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT included in the scope of delivery

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. Nedpfx Aeiyyc Eskfjwf We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: excellent (used), Year of construction: 1999, bore capacity in steel (diameter) 36.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm 4 speeds 120-900 / 240 - 1780 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 / 0.4 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm well-maintained condition (!!) current new price approx. 18.000 Euro Nedpfx Akey Agpqjfowf special price on request Equipment: - robust pillar drill (V-belt) - electromagnetic feed clutch = spindle feed * with overload protection and electrical handle cross circuit - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German

Year of construction: 2009, condition: used, Empty weight: 350 kg Dimensions (LxBxH): 66 x 44 x 183 cm Serial number: 41142 Spindle speed: 160-2250 rpm Power: 1,9 kW Drilling range: 293 mm Column diameter: 115 mm Spindle stroke: 120 mm Own weight: 350 kg Dimensions LxWxH: 660x440x1837mm Including: machine clamp, documentation Online auction of the surplus sheet metalworking machines, aluminium sheet stock and welding tools (e.g. RAS, AMADA press brakes, SUHNER, MIG MAG ESAB, TRM fiber laser welding etc.) following the outsourcing and decommissioning of the metal and welding workshop in Illnau-Effretikon (near Zurich) in Switzerland. The online auction opens Thursday 16 April and closes Thursday 21 May. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 19 May Nodpfxsy E Hppe Akfswf Pickup days are on: - Tuesday 2 June - Wednesday 3 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Nsdpfx Asy Eqtijkfewf

Year of construction: 2004, condition: ready for operation (used), 1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible. Nedpfx Akoy Eg Edsfowf

Condition: new, Year of construction: 2021, functionality: fully functional, !Machine like new, only 600 hours! HEIDENHAIN 640 Table 1300X700 X, Y, Z: X=1220 Y=710 Z=630 Spindle revolutions 60-10000 Nsdpfx Aswx Nkcekfswf 24 positions tool changer. Machine dimesnions 3200 X 3900 X 2490 Machine weight 9500 KG

Condition: new, 20 mm 40 mm MK 4 spindle stroke 160 mm throat 300 mm column diameter 145 mm 615x430 mm 2x14x224 mm distance spindle /table 147/688 mm feed 0,1-0,2-0,3-0,4 mm/U 140-4000 U/min. total power requirement 4,0 kW Nodoyv Nxbepfx Akfjwf Machine height 1885 mm Standard equipment: - Electromagnetic feed clutch with overload protection and electrical    Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically - Protection IP 54 - Motor insulation class "F" - Spindle protection with electrical protection

Condition: used, Year of construction: 1993, pressure 80 t throat 280 mm stroke 10 - 140 mm Stroke rate 85 / min Distance table/ram, max. stroke up, adjustment up 380 mm Table surface area 850 x 560 mm Hole in the table 300 x 200 mm Table height above floor 790 - 950 mm Ram surface 420 x 210 mm Ram adjustment 60 mm Power capacity 4,0 kW Weight 4,5 t Nodpoyx Ikujfx Akfewf Dimensions (WxDxH) 1,3 x 1,4 x 2,45 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, foot operation can be inspected in running condition in our warehouse

Year of construction: 2004, condition: used, Conveyor tower Nodpfx Asyyb Rwokfswf Ambaflex / Kolbus SV-400-1800-HS / XAF 660 Year: 2004 Description: - Straight delivery

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,01 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Z stroke : 150 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,01 [°] - Number of turrets : 1 Nwedpfx Aouha Eljkfef UPPER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 5.700 [rpm] - Live tools power : 2,8 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 6.000 [rpm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.645 x 1.403 [mm] - Machine height : 1.680 [mm] - Machine weight : 3.880 [kg] EQUIPMENT - CNC : Fanuc 16 iTB - 3 colors status lamp - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : IEMCA BOSS 432/32LL - Electric transformer

Condition: ready for operation (used), Year of construction: 2007, A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible. Nwedpfx Akey Ax Tnsfef